diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 25def348e5ba9f93324ce1f9765af5fcf17c7807..7ab79e247245e442f3df07770f9f42206d3abb7e 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -950,12 +950,7 @@ int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, * physical eraseblock @to. The @vid_hdr buffer may be changed by this * function. Returns: * o %0 in case of success; - * o %1 if the operation was canceled because the volume is being deleted - * or because the PEB was put meanwhile; - * o %2 if the operation was canceled because there was a write error to the - * target PEB; - * o %-EAGAIN if the operation was canceled because a bit-flip was detected - * in the target PEB; + * o %MOVE_CANCEL_RACE, %MOVE_TARGET_WR_ERR, or %MOVE_CANCEL_BITFLIPS; * o a negative error code in case of failure. */ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, @@ -986,13 +981,12 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, * be locked in 'ubi_wl_put_peb()' and wait for the WL worker to finish. */ vol = ubi->volumes[idx]; + spin_unlock(&ubi->volumes_lock); if (!vol) { /* No need to do further work, cancel */ dbg_eba("volume %d is being removed, cancel", vol_id); - spin_unlock(&ubi->volumes_lock); - return 1; + return MOVE_CANCEL_RACE; } - spin_unlock(&ubi->volumes_lock); /* * We do not want anybody to write to this logical eraseblock while we @@ -1004,12 +998,13 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, * (@from). This task locks the LEB and goes sleep in the * 'ubi_wl_put_peb()' function on the @ubi->move_mutex. In turn, we are * holding @ubi->move_mutex and go sleep on the LEB lock. So, if the - * LEB is already locked, we just do not move it and return %1. + * LEB is already locked, we just do not move it and return + * %MOVE_CANCEL_RACE, which means that UBI will re-try, but later. */ err = leb_write_trylock(ubi, vol_id, lnum); if (err) { dbg_eba("contention on LEB %d:%d, cancel", vol_id, lnum); - return err; + return MOVE_CANCEL_RACE; } /* @@ -1021,14 +1016,14 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, dbg_eba("LEB %d:%d is no longer mapped to PEB %d, mapped to " "PEB %d, cancel", vol_id, lnum, from, vol->eba_tbl[lnum]); - err = 1; + err = MOVE_CANCEL_RACE; goto out_unlock_leb; } /* * OK, now the LEB is locked and we can safely start moving it. Since - * this function utilizes the @ubi->peb1_buf buffer which is shared - * with some other functions, so lock the buffer by taking the + * this function utilizes the @ubi->peb_buf1 buffer which is shared + * with some other functions - we lock the buffer by taking the * @ubi->buf_mutex. */ mutex_lock(&ubi->buf_mutex); @@ -1059,7 +1054,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, cond_resched(); /* - * It may turn out to me that the whole @from physical eraseblock + * It may turn out to be that the whole @from physical eraseblock * contains only 0xFF bytes. Then we have to only write the VID header * and do not write any data. This also means we should not set * @vid_hdr->copy_flag, @vid_hdr->data_size, and @vid_hdr->data_crc. @@ -1074,7 +1069,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, err = ubi_io_write_vid_hdr(ubi, to, vid_hdr); if (err) { if (err == -EIO) - err = 2; + err = MOVE_TARGET_WR_ERR; goto out_unlock_buf; } @@ -1086,7 +1081,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, if (err != UBI_IO_BITFLIPS) ubi_warn("cannot read VID header back from PEB %d", to); else - err = -EAGAIN; + err = MOVE_CANCEL_BITFLIPS; goto out_unlock_buf; } @@ -1094,7 +1089,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, err = ubi_io_write_data(ubi, ubi->peb_buf1, to, 0, aldata_size); if (err) { if (err == -EIO) - err = 2; + err = MOVE_TARGET_WR_ERR; goto out_unlock_buf; } @@ -1111,7 +1106,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, ubi_warn("cannot read data back from PEB %d", to); else - err = -EAGAIN; + err = MOVE_CANCEL_BITFLIPS; goto out_unlock_buf; } diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 749007e9f1aae14edac974b56606fa381c22df39..fd9b20da5b6bfda29be9f278120d0ce83ea91ae7 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -100,6 +100,22 @@ enum { UBI_IO_BITFLIPS }; +/* + * Return codes of the 'ubi_eba_copy_leb()' function. + * + * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source + * PEB was put meanwhile, or there is I/O on the source PEB + * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target + * PEB + * MOVE_CANCEL_BITFLIPS: canceled because a bit-flip was detected in the + * target PEB + */ +enum { + MOVE_CANCEL_RACE = 1, + MOVE_TARGET_WR_ERR, + MOVE_CANCEL_BITFLIPS, +}; + /** * struct ubi_wl_entry - wear-leveling entry. * @u.rb: link in the corresponding (free/used) RB-tree diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 891534f8210d595f2eea3a2b5d3a22e17facdce7..ec915c02301cdb9bbc8bba07839b5fbd00684260 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -756,15 +756,14 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, err = ubi_eba_copy_leb(ubi, e1->pnum, e2->pnum, vid_hdr); if (err) { - if (err == -EAGAIN) - goto out_not_moved; - if (err < 0) - goto out_error; - if (err == 2) { - /* Target PEB write error, torture it */ + if (err == MOVE_CANCEL_BITFLIPS || + err == MOVE_TARGET_WR_ERR) { + /* Target PEB bit-flips or write error, torture it */ torture = 1; goto out_not_moved; } + if (err < 0) + goto out_error; /* * The LEB has not been moved because the volume is being @@ -774,7 +773,7 @@ static int wear_leveling_worker(struct ubi_device *ubi, struct ubi_work *wrk, */ dbg_wl("canceled moving PEB %d", e1->pnum); - ubi_assert(err == 1); + ubi_assert(err == MOVE_CANCEL_RACE); ubi_free_vid_hdr(ubi, vid_hdr); vid_hdr = NULL;