提交 908ab936 编写于 作者: J Joseph Lo 提交者: Stephen Warren

ARM: dts: tegra: fix the activate polarity of cd-gpio in mmc host

The GPIO pin of SD slot card detection should active low.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Tested-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
上级 6dbe51c2
......@@ -444,7 +444,7 @@
};
sdhci@c8000600 {
cd-gpios = <&gpio 23 0>; /* gpio PC7 */
cd-gpios = <&gpio 23 1>; /* gpio PC7 */
};
sound {
......
......@@ -437,7 +437,7 @@
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <4>;
......@@ -445,7 +445,7 @@
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
......
......@@ -436,7 +436,7 @@
sdhci@c8000000 {
status = "okay";
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
cd-gpios = <&gpio 173 1>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 169 0>; /* gpio PV1 */
bus-width = <4>;
......
......@@ -584,7 +584,7 @@
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
......
......@@ -465,7 +465,7 @@
};
sdhci@c8000600 {
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
cd-gpios = <&gpio 58 1>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
bus-width = <4>;
status = "okay";
......
......@@ -325,7 +325,7 @@
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio 121 0>; /* gpio PP1 */
cd-gpios = <&gpio 121 1>; /* gpio PP1 */
wp-gpios = <&gpio 122 0>; /* gpio PP2 */
bus-width = <4>;
};
......
......@@ -520,7 +520,7 @@
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <4>;
......
......@@ -510,6 +510,7 @@
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 173 0>; /* gpio PV5 */
bus-width = <8>;
};
......
......@@ -257,7 +257,7 @@
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
......
......@@ -311,7 +311,7 @@
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
cd-gpios = <&gpio 69 1>; /* gpio PI5 */
wp-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 31 0>; /* gpio PD7 */
bus-width = <4>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册