[MIPS] Updated Sibyte headers

This is an update to the earlier patch for the sibyte headers, and superceeds
the previous patch.  Changes were necessary to get the tbprof driver working
on the bcm1480.

Patch to update Sibyte header files to match master versions maintained
at Broadcom.  This patch also corrects some whitespace problems, and
(hopefully) shouldn't introduce any new ones.
Signed-off-by: NMark Mason <mason@broadcom.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

include/asm-mips/sibyte/bcm1480_int.h

@@ -157,6 +157,7 @@
  * Mask values for each interrupt
  */
 
+#define _BCM1480_INT_MASK(w,n)              _SB_MAKEMASK(w,((n) & 0x3F))
 #define _BCM1480_INT_MASK1(n)               _SB_MAKEMASK1(((n) & 0x3F))
 #define _BCM1480_INT_OFFSET(n)              (((n) & 0x40) << 6)
 
@@ -195,6 +196,7 @@
 #define M_BCM1480_INT_PMI_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
 #define M_BCM1480_INT_PMO_LOW               _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
 #define M_BCM1480_INT_PMO_HIGH              _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_ALL              _BCM1480_INT_MASK(8,K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_0              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
 #define M_BCM1480_INT_MBOX_0_1              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
 #define M_BCM1480_INT_MBOX_0_2              _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)

include/asm-mips/sibyte/bcm1480_mc.h

@@ -382,6 +382,10 @@
 #define M_BCM1480_MC_CS6                    _SB_MAKEMASK1(10)
 #define M_BCM1480_MC_CS7                    _SB_MAKEMASK1(11)
 
+#define M_BCM1480_MC_CS                  _SB_MAKEMASK(8,S_BCM1480_MC_CS0)
+#define V_BCM1480_MC_CS(x)               _SB_MAKEVALUE(x,S_BCM1480_MC_CS0)
+#define G_BCM1480_MC_CS(x)               _SB_GETVALUE(x,S_BCM1480_MC_CS0,M_BCM1480_MC_CS0)
+
 #define M_BCM1480_MC_CMD_ACTIVE             _SB_MAKEMASK1(16)
 
 /*
@@ -412,6 +416,8 @@
 #define K_BCM1480_MC_DRAM_TYPE_DDR2	    2
 #endif
 
+#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1   0
+
 #define V_BCM1480_MC_DRAM_TYPE_JEDEC        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
 #define V_BCM1480_MC_DRAM_TYPE_FCRAM        V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
 
@@ -511,6 +517,22 @@
 #define M_BCM1480_MC_WR_ODT6_CS6	    _SB_MAKEMASK1(31)
 
 #define M_BCM1480_MC_CS_ODD_ODT_EN	    _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_ODT0	            0
+#define M_BCM1480_MC_ODT0		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT0)
+#define V_BCM1480_MC_ODT0(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT0)
+
+#define S_BCM1480_MC_ODT2	            8
+#define M_BCM1480_MC_ODT2		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT2)
+#define V_BCM1480_MC_ODT2(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT2)
+
+#define S_BCM1480_MC_ODT4	            16
+#define M_BCM1480_MC_ODT4		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT4)
+#define V_BCM1480_MC_ODT4(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT4)
+
+#define S_BCM1480_MC_ODT6	            24
+#define M_BCM1480_MC_ODT6		    _SB_MAKEMASK(8,S_BCM1480_MC_ODT6)
+#define V_BCM1480_MC_ODT6(x)		    _SB_MAKEVALUE(x,S_BCM1480_MC_ODT6)
 #endif
 
 /*

include/asm-mips/sibyte/bcm1480_regs.h

@@ -230,6 +230,7 @@
 
 #define A_BCM1480_DUART_IMRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
 #define A_BCM1480_DUART_ISRREG(chan)	    (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+#define A_BCM1480_DUART_IN_PORT(chan)       (A_BCM1480_DUART(chan) + R_DUART_INP_ORT)
 
 /*
  * These constants are the absolute addresses.
@@ -404,6 +405,21 @@
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0           0x0000		/* 0x0x0 */
 #define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET       0x0008		/* 0x0x8 */
 
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define R_BCM1480_IMR_MAILBOX_CPU         0x00
+#define R_BCM1480_IMR_MAILBOX_SET         0x08
+#define R_BCM1480_IMR_MAILBOX_CLR         0x10
+#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20
+#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \
+    (A_BCM1480_IMR_CPU0_BASE + \
+     (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \
+     (cpu * BCM1480_IMR_REGISTER_SPACING) + \
+     (R_BCM1480_IMR_MAILBOX_0_CPU + reg))
+
 /*  *********************************************************************
     * System Performance Counter Registers (Section 4.7)
     ********************************************************************* */
@@ -428,6 +444,10 @@
 #define A_BCM1480_SCD_PERF_CNT_6            0x0010020500
 #define A_BCM1480_SCD_PERF_CNT_7            0x0010020508
 
+#define BCM1480_SCD_NUM_PERF_CNT 8
+#define BCM1480_SCD_PERF_CNT_SPACING 8
+#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING))
+
 /*  *********************************************************************
     * System Bus Watcher Registers (Section 4.8)
     ********************************************************************* */

include/asm-mips/sibyte/bcm1480_scd.h

@@ -10,7 +10,7 @@
     *
     *********************************************************************
     *
-    *  Copyright 2000,2001,2002,2003
+    *  Copyright 2000,2001,2002,2003,2004,2005
     *  Broadcom Corporation. All rights reserved.
     *
     *  This program is free software; you can redistribute it and/or
@@ -78,6 +78,7 @@
 #define K_SYS_PART_BCM1280          0x1206
 #define K_SYS_PART_BCM1455          0x1407
 #define K_SYS_PART_BCM1255          0x1257
+#define K_SYS_PART_BCM1158          0x1156
 
 /*
  * Manufacturing Information Register (Table 14)
@@ -237,58 +238,42 @@
  * System Performance Counter Configuration Register (Table 31)
  * Register: PERF_CNT_CFG_0
  *
- * Since the clear/enable bits are moved compared to the
- * 1250 and there are more fields, this register will be BCM1480 specific.
+ * SPC_CFG_SRC[0-3] is the same as the 1250.
+ * SPC_CFG_SRC[4-7] only exist on the 1480
+ * The clear/enable bits are in different locations on the 1250 and 1480.
  */
 
-#define S_BCM1480_SPC_CFG_SRC0              0
-#define M_BCM1480_SPC_CFG_SRC0              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0)
-#define V_BCM1480_SPC_CFG_SRC0(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0)
-#define G_BCM1480_SPC_CFG_SRC0(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0)
-
-#define S_BCM1480_SPC_CFG_SRC1              8
-#define M_BCM1480_SPC_CFG_SRC1              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1)
-#define V_BCM1480_SPC_CFG_SRC1(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1)
-#define G_BCM1480_SPC_CFG_SRC1(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1)
-
-#define S_BCM1480_SPC_CFG_SRC2              16
-#define M_BCM1480_SPC_CFG_SRC2              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2)
-#define V_BCM1480_SPC_CFG_SRC2(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2)
-#define G_BCM1480_SPC_CFG_SRC2(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2)
-
-#define S_BCM1480_SPC_CFG_SRC3              24
-#define M_BCM1480_SPC_CFG_SRC3              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3)
-#define V_BCM1480_SPC_CFG_SRC3(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3)
-#define G_BCM1480_SPC_CFG_SRC3(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3)
-
-#define S_BCM1480_SPC_CFG_SRC4              32
-#define M_BCM1480_SPC_CFG_SRC4              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4)
-#define V_BCM1480_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4)
-#define G_BCM1480_SPC_CFG_SRC4(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4)
-
-#define S_BCM1480_SPC_CFG_SRC5              40
-#define M_BCM1480_SPC_CFG_SRC5              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5)
-#define V_BCM1480_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5)
-#define G_BCM1480_SPC_CFG_SRC5(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5)
-
-#define S_BCM1480_SPC_CFG_SRC6              48
-#define M_BCM1480_SPC_CFG_SRC6              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6)
-#define V_BCM1480_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6)
-#define G_BCM1480_SPC_CFG_SRC6(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6)
-
-#define S_BCM1480_SPC_CFG_SRC7              56
-#define M_BCM1480_SPC_CFG_SRC7              _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7)
-#define V_BCM1480_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7)
-#define G_BCM1480_SPC_CFG_SRC7(x)           _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7)
+#define S_SPC_CFG_SRC4              32
+#define M_SPC_CFG_SRC4              _SB_MAKEMASK(8,S_SPC_CFG_SRC4)
+#define V_SPC_CFG_SRC4(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC4)
+#define G_SPC_CFG_SRC4(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4)
+
+#define S_SPC_CFG_SRC5              40
+#define M_SPC_CFG_SRC5              _SB_MAKEMASK(8,S_SPC_CFG_SRC5)
+#define V_SPC_CFG_SRC5(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC5)
+#define G_SPC_CFG_SRC5(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5)
+
+#define S_SPC_CFG_SRC6              48
+#define M_SPC_CFG_SRC6              _SB_MAKEMASK(8,S_SPC_CFG_SRC6)
+#define V_SPC_CFG_SRC6(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC6)
+#define G_SPC_CFG_SRC6(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6)
+
+#define S_SPC_CFG_SRC7              56
+#define M_SPC_CFG_SRC7              _SB_MAKEMASK(8,S_SPC_CFG_SRC7)
+#define V_SPC_CFG_SRC7(x)           _SB_MAKEVALUE(x,S_SPC_CFG_SRC7)
+#define G_SPC_CFG_SRC7(x)           _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7)
 
 /*
  * System Performance Counter Control Register (Table 32)
  * Register: PERF_CNT_CFG_1
  * BCM1480 specific
  */
-
 #define M_BCM1480_SPC_CFG_CLEAR     _SB_MAKEMASK1(0)
 #define M_BCM1480_SPC_CFG_ENABLE    _SB_MAKEMASK1(1)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_SPC_CFG_CLEAR			M_BCM1480_SPC_CFG_CLEAR
+#define M_SPC_CFG_ENABLE		M_BCM1480_SPC_CFG_ENABLE
+#endif
 
 /*
  * System Performance Counters (Table 33)
@@ -405,20 +390,10 @@
  * Trace Control Register (Table 49)
  * Register: TRACE_CFG
  *
- * Bits 0..8 are the same as the BCM1250, rest are different.
- * Entire register is redefined below.
+ * BCM1480 changes to this register (other than location of the CUR_ADDR field)
+ * are defined below.
  */
 
-#define M_BCM1480_SCD_TRACE_CFG_RESET       _SB_MAKEMASK1(0)
-#define M_BCM1480_SCD_TRACE_CFG_START_READ  _SB_MAKEMASK1(1)
-#define M_BCM1480_SCD_TRACE_CFG_START       _SB_MAKEMASK1(2)
-#define M_BCM1480_SCD_TRACE_CFG_STOP        _SB_MAKEMASK1(3)
-#define M_BCM1480_SCD_TRACE_CFG_FREEZE      _SB_MAKEMASK1(4)
-#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
-#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL  _SB_MAKEMASK1(6)
-#define M_BCM1480_SCD_TRACE_CFG_FULL        _SB_MAKEMASK1(7)
-#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT   _SB_MAKEMASK1(8)
-
 #define S_BCM1480_SCD_TRACE_CFG_MODE        16
 #define M_BCM1480_SCD_TRACE_CFG_MODE        _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
 #define V_BCM1480_SCD_TRACE_CFG_MODE(x)     _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
@@ -428,9 +403,4 @@
 #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT	1
 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID	2
 
-#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR    24
-#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR    _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
-#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
-#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
-
 #endif /* _BCM1480_SCD_H */

include/asm-mips/sibyte/board.h

 /*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -19,8 +19,8 @@
 #ifndef _SIBYTE_BOARD_H
 #define _SIBYTE_BOARD_H
 
-
 #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \
+    defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \
     defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \
     defined(CONFIG_SIBYTE_LITTLESUR)
 #include <asm/sibyte/swarm.h>
@@ -55,6 +55,16 @@
 #define setleds(t0,t1,c0,c1,c2,c3)
 #endif /* LEDS_PHYS */
 
+#else
+
+void swarm_setup(void);
+
+#ifdef LEDS_PHYS
+extern void setleds(char *str);
+#else
+#define setleds(s) do { } while (0)
+#endif /* LEDS_PHYS */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _SIBYTE_BOARD_H */

include/asm-mips/sibyte/carmel.h

@@ -18,7 +18,6 @@
 #ifndef __ASM_SIBYTE_CARMEL_H
 #define __ASM_SIBYTE_CARMEL_H
 
-
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_int.h>
 

include/asm-mips/sibyte/sb1250_int.h

@@ -45,8 +45,6 @@
  * First, the interrupt numbers.
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
-
 #define K_INT_SOURCES               64
 
 #define K_INT_WATCHDOG_TIMER_0      0
@@ -152,6 +150,7 @@
 #define M_INT_MBOX_1                _SB_MAKEMASK1(K_INT_MBOX_1)
 #define M_INT_MBOX_2                _SB_MAKEMASK1(K_INT_MBOX_2)
 #define M_INT_MBOX_3                _SB_MAKEMASK1(K_INT_MBOX_3)
+#define M_INT_MBOX_ALL              _SB_MAKEMASK(4,K_INT_MBOX_0)
 #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_INT_CYCLE_CP0_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT)
 #define M_INT_CYCLE_CP1_INT	    _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT)
@@ -247,5 +246,3 @@
 
 
 #endif	/* 1250/112x */
-
-#endif

include/asm-mips/sibyte/sb1250_mac.h

@@ -129,9 +129,9 @@
 #define M_MAC_BYPASS_16             _SB_MAKEMASK1(42)
 #define M_MAC_BYPASS_FCS_CHK	    _SB_MAKEMASK1(43)
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_RX_CH_SEL_MSB	    _SB_MAKEMASK1(44)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_SPLIT_CH_SEL	    _SB_MAKEMASK1(45)
@@ -223,9 +223,9 @@
 /* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
 /* #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(6,S_MAC_TX_WR_THRSH) */
 #endif /* up to 1250 PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TX_WR_THRSH           _SB_MAKEMASK(7,S_MAC_TX_WR_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define V_MAC_TX_WR_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_WR_THRSH)
 #define G_MAC_TX_WR_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_WR_THRSH,M_MAC_TX_WR_THRSH)
 
@@ -234,9 +234,9 @@
 /* XXX: Can't enable, as it has the same name as a pass2+ define below.  */
 /* #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(6,S_MAC_TX_RD_THRSH) */
 #endif /* up to 1250 PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_TX_RD_THRSH           _SB_MAKEMASK(7,S_MAC_TX_RD_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define V_MAC_TX_RD_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_TX_RD_THRSH)
 #define G_MAC_TX_RD_THRSH(x)        _SB_GETVALUE(x,S_MAC_TX_RD_THRSH,M_MAC_TX_RD_THRSH)
 
@@ -260,12 +260,12 @@
 #define V_MAC_RX_RL_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_RX_RL_THRSH)
 #define G_MAC_RX_RL_THRSH(x)        _SB_GETVALUE(x,S_MAC_RX_RL_THRSH,M_MAC_RX_RL_THRSH)
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define S_MAC_ENC_FC_THRSH           _SB_MAKE64(56)
 #define M_MAC_ENC_FC_THRSH           _SB_MAKEMASK(6,S_MAC_ENC_FC_THRSH)
 #define V_MAC_ENC_FC_THRSH(x)        _SB_MAKEVALUE(x,S_MAC_ENC_FC_THRSH)
 #define G_MAC_ENC_FC_THRSH(x)        _SB_GETVALUE(x,S_MAC_ENC_FC_THRSH,M_MAC_ENC_FC_THRSH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 /*
  * MAC Frame Configuration Registers (Table 9-15)
@@ -462,9 +462,9 @@
 #define M_MAC_LTCOL_ERR             _SB_MAKEMASK1(44)
 #define M_MAC_EXCOL_ERR             _SB_MAKEMASK1(45)
 #define M_MAC_CNTR_OVRFL_ERR        _SB_MAKEMASK1(46)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_SPLIT_EN		    _SB_MAKEMASK1(47) 	/* interrupt mask only */
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_MAC_COUNTER_ADDR          _SB_MAKE64(47)
 #define M_MAC_COUNTER_ADDR          _SB_MAKEMASK(5,S_MAC_COUNTER_ADDR)
@@ -598,9 +598,9 @@
 #define M_MAC_MCAST_INV         _SB_MAKEMASK1(4)
 #define M_MAC_BCAST_EN          _SB_MAKEMASK1(5)
 #define M_MAC_DIRECT_INV        _SB_MAKEMASK1(6)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_MAC_ALLMCAST_EN	_SB_MAKEMASK1(7)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
 #define S_MAC_IPHDR_OFFSET      _SB_MAKE64(8)
 #define M_MAC_IPHDR_OFFSET      _SB_MAKEMASK(8,S_MAC_IPHDR_OFFSET)

include/asm-mips/sibyte/sb1250_mc.h

@@ -295,7 +295,7 @@
 
 #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
 #define M_MC_PRE_ON_A8              _SB_MAKEMASK1(36)
-#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(38)
+#define M_MC_RAM_WITH_A13           _SB_MAKEMASK1(37)
 #endif /* 1250 PASS3 || 112x PASS1 */
 
 

include/asm-mips/sibyte/sb1250_regs.h

@@ -131,6 +131,7 @@
 
 #endif
 
+
 /*  *********************************************************************
     * PCI Interface Registers
     ********************************************************************* */
@@ -239,14 +240,14 @@
 #define R_MAC_VLANTAG                   0x00000110
 #define R_MAC_FRAMECFG                  0x00000118
 #define R_MAC_EOPCNT                    0x00000120
-#define R_MAC_FIFO_PTRS                 0x00000130
+#define R_MAC_FIFO_PTRS                 0x00000128
 #define R_MAC_ADFILTER_CFG              0x00000200
 #define R_MAC_ETHERNET_ADDR             0x00000208
 #define R_MAC_PKT_TYPE                  0x00000210
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_MAC_ADMASK0			0x00000218
 #define R_MAC_ADMASK1			0x00000220
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 #define R_MAC_HASH_BASE                 0x00000240
 #define R_MAC_ADDR_BASE                 0x00000280
 #define R_MAC_CHLO0_BASE                0x00000300
@@ -256,9 +257,9 @@
 #define R_MAC_INT_MASK                  0x00000410
 #define R_MAC_TXD_CTL                   0x00000420
 #define R_MAC_MDIO                      0x00000428
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_MAC_STATUS1		        0x00000430
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define R_MAC_DEBUG_STATUS              0x00000448
 
 #define MAC_HASH_COUNT			8
@@ -289,11 +290,11 @@
 #define R_DUART_RX_HOLD             0x160
 #define R_DUART_TX_HOLD             0x170
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_DUART_FULL_CTL	    0x140
 #define R_DUART_OPCR_X		    0x180
 #define R_DUART_AUXCTL_X	    0x190
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
 
 
 /*
@@ -308,6 +309,7 @@
 #define R_DUART_IMR_B               0x350
 #define R_DUART_OUT_PORT            0x360
 #define R_DUART_OPCR                0x370
+#define R_DUART_IN_PORT             0x380
 
 #define R_DUART_SET_OPR		    0x3B0
 #define R_DUART_CLEAR_OPR	    0x3C0
@@ -685,12 +687,17 @@
 #define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
+#define ADDR_TRAP_SPACING 8
+#define NUM_ADDR_TRAP 4
+#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
+
 
 /*  *********************************************************************
     * System Interrupt Mapper Registers
     ********************************************************************* */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
 #define A_IMR_CPU0_BASE                 0x0010020000
 #define A_IMR_CPU1_BASE                 0x0010022000
 #define IMR_REGISTER_SPACING            0x2000
@@ -700,6 +707,7 @@
 #define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg))
 
 #define R_IMR_INTERRUPT_DIAG            0x0010
+#define R_IMR_INTERRUPT_LDT             0x0018
 #define R_IMR_INTERRUPT_MASK            0x0028
 #define R_IMR_INTERRUPT_TRACE           0x0038
 #define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
@@ -715,7 +723,14 @@
 #define R_IMR_INTERRUPT_STATUS_COUNT    7
 #define R_IMR_INTERRUPT_MAP_BASE        0x0200
 #define R_IMR_INTERRUPT_MAP_COUNT       64
-#endif	/* 1250/112x */
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define A_MAILBOX_REGISTER(reg,cpu) \
+    (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
 
 /*  *********************************************************************
     * System Performance Counter Registers
@@ -727,6 +742,10 @@
 #define A_SCD_PERF_CNT_2            0x00100204E0
 #define A_SCD_PERF_CNT_3            0x00100204E8
 
+#define SCD_NUM_PERF_CNT 4
+#define SCD_PERF_CNT_SPACING 8
+#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
+
 /*  *********************************************************************
     * System Bus Watcher Registers
     ********************************************************************* */
@@ -772,6 +791,15 @@
 #define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
 #define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
 
+#define TRACE_REGISTER_SPACING 8
+#define TRACE_NUM_REGISTERS    8
+#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
+   (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
+#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
+   (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
+
 /*  *********************************************************************
     * System Generic DMA Registers
     ********************************************************************* */

include/asm-mips/sibyte/sb1250_scd.h

@@ -10,7 +10,7 @@
     *
     *********************************************************************
     *
-    *  Copyright 2000,2001,2002,2003
+    *  Copyright 2000,2001,2002,2003,2004,2005
     *  Broadcom Corporation. All rights reserved.
     *
     *  This program is free software; you can redistribute it and/or
@@ -150,7 +150,7 @@
  * (For the assembler version, sysrev and dest may be the same register.
  * Also, it clobbers AT.)
  */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define SYS_SOC_TYPE(dest, sysrev)					\
 	.set push ;							\
 	.set reorder ;							\
@@ -214,6 +214,7 @@
 #define G_SYS_YPOS(x)             _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
 #endif
 
+
 /*
  * System Config Register (Table 4-2)
  * Register: SCD_SYSTEM_CFG
@@ -360,13 +361,13 @@
  */
 
 #define V_SCD_TIMER_FREQ            1000000
-#define V_SCD_TIMER_WIDTH           23
 
 #define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(23,S_SCD_TIMER_INIT)
 #define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
 #define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
 
+#define V_SCD_TIMER_WIDTH	    23
 #define S_SCD_TIMER_CNT             0
 #define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
 #define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
@@ -380,7 +381,6 @@
  * System Performance Counters
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
 #define S_SPC_CFG_SRC0            0
 #define M_SPC_CFG_SRC0            _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
 #define V_SPC_CFG_SRC0(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
@@ -401,6 +401,7 @@
 #define V_SPC_CFG_SRC3(x)         _SB_MAKEVALUE(x,S_SPC_CFG_SRC3)
 #define G_SPC_CFG_SRC3(x)         _SB_GETVALUE(x,S_SPC_CFG_SRC3,M_SPC_CFG_SRC3)
 
+#if SIBYTE_HDR_FEATURE_1250_112x
 #define M_SPC_CFG_CLEAR		_SB_MAKEMASK1(32)
 #define M_SPC_CFG_ENABLE	_SB_MAKEMASK1(33)
 #endif
@@ -516,8 +517,6 @@
  * Trace Buffer Config register
  */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
-
 #define M_SCD_TRACE_CFG_RESET           _SB_MAKEMASK1(0)
 #define M_SCD_TRACE_CFG_START_READ      _SB_MAKEMASK1(1)
 #define M_SCD_TRACE_CFG_START           _SB_MAKEMASK1(2)
@@ -526,17 +525,26 @@
 #define M_SCD_TRACE_CFG_FREEZE_FULL     _SB_MAKEMASK1(5)
 #define M_SCD_TRACE_CFG_DEBUG_FULL      _SB_MAKEMASK1(6)
 #define M_SCD_TRACE_CFG_FULL            _SB_MAKEMASK1(7)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define M_SCD_TRACE_CFG_FORCECNT        _SB_MAKEMASK1(8)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
+/*
+ * This field is the same on the 1250/112x and 1480, just located in
+ * a slightly different place in the register.
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
 #define S_SCD_TRACE_CFG_CUR_ADDR        10
+#else
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SCD_TRACE_CFG_CUR_ADDR        24
+#endif	/* 1480 */
+#endif  /* 1250/112x */
+
 #define M_SCD_TRACE_CFG_CUR_ADDR        _SB_MAKEMASK(8,S_SCD_TRACE_CFG_CUR_ADDR)
 #define V_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
 #define G_SCD_TRACE_CFG_CUR_ADDR(x)     _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
 
-#endif	/* 1250/112x */
-
 /*
  * Trace Event registers
  */

include/asm-mips/sibyte/swarm.h

@@ -32,6 +32,18 @@
 #define SIBYTE_HAVE_IDE    1
 #define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
 #endif
+#ifdef CONFIG_SIBYTE_PT1120
+#define SIBYTE_BOARD_NAME "PT1120"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
+#ifdef CONFIG_SIBYTE_PT1125
+#define SIBYTE_BOARD_NAME "PT1125"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE    1
+#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
+#endif
 #ifdef CONFIG_SIBYTE_LITTLESUR
 #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
 #define SIBYTE_HAVE_PCMCIA 0