iio:st_sensors fix build when !CONFIG_IIO_TRIGGER

Partly a case of removing unused headers and partly a case
of ifdefing out the iio_trigger_ops structures.  This has
come about because of an 'unusual' separation of code in this
driver.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>

drivers/iio/accel/st_accel_core.c

@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/trigger.h>
 #include <linux/iio/buffer.h>
 
 #include <linux/iio/common/st_sensors.h>
@@ -419,10 +419,15 @@ static const struct iio_info accel_info = {
 	.write_raw = &st_accel_write_raw,
 };
 
+#ifdef CONFIG_IIO_TRIGGER
 static const struct iio_trigger_ops st_accel_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
 };
+#define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
+#else
+#define ST_ACCEL_TRIGGER_OPS NULL
+#endif
 
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
@@ -455,7 +460,7 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 			goto st_accel_common_probe_error;
 
 		err = st_sensors_allocate_trigger(indio_dev,
-							&st_accel_trigger_ops);
+						 ST_ACCEL_TRIGGER_OPS);
 		if (err < 0)
 			goto st_accel_probe_trigger_error;
 	}

drivers/iio/accel/st_accel_i2c.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_i2c.h>

drivers/iio/accel/st_accel_spi.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_spi.h>

drivers/iio/gyro/st_gyro_core.c

@@ -21,7 +21,7 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/trigger.h>
 #include <linux/iio/buffer.h>
 
 #include <linux/iio/common/st_sensors.h>
@@ -287,10 +287,15 @@ static const struct iio_info gyro_info = {
 	.write_raw = &st_gyro_write_raw,
 };
 
+#ifdef CONFIG_IIO_TRIGGER
 static const struct iio_trigger_ops st_gyro_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
 };
+#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
+#else
+#define ST_GYRO_TRIGGER_OPS NULL
+#endif
 
 int st_gyro_common_probe(struct iio_dev *indio_dev)
 {
@@ -323,7 +328,7 @@ int st_gyro_common_probe(struct iio_dev *indio_dev)
 			goto st_gyro_common_probe_error;
 
 		err = st_sensors_allocate_trigger(indio_dev,
-							&st_gyro_trigger_ops);
+						  ST_GYRO_TRIGGER_OPS);
 		if (err < 0)
 			goto st_gyro_probe_trigger_error;
 	}

drivers/iio/gyro/st_gyro_i2c.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_i2c.h>

drivers/iio/gyro/st_gyro_spi.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_spi.h>

drivers/iio/magnetometer/st_magn_core.c

@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/trigger_consumer.h>
 #include <linux/iio/buffer.h>
 
 #include <linux/iio/common/st_sensors.h>

drivers/iio/magnetometer/st_magn_i2c.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_i2c.h>

drivers/iio/magnetometer/st_magn_spi.c

@@ -13,7 +13,6 @@
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/trigger.h>
 
 #include <linux/iio/common/st_sensors.h>
 #include <linux/iio/common/st_sensors_spi.h>