diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
index 2e268b6463485e7c5c8a4940da1cf425205456f6..a2f5419057154ca94addf02e0ba0135b23f42073 100644
--- a/arch/sparc/include/asm/tsb.h
+++ b/arch/sparc/include/asm/tsb.h
@@ -256,8 +256,6 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
 	(KERNEL_TSB_SIZE_BYTES / 16)
 #define KERNEL_TSB4M_NENTRIES	4096
 
-#define KTSB_PHYS_SHIFT		15
-
 	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
 	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
 	 * and the found TTE will be left in REG1.  REG3 and REG4 must
@@ -266,17 +264,15 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
 	 * VADDR and TAG will be preserved and not clobbered by this macro.
 	 */
 #define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-661:	sethi		%hi(swapper_tsb), REG1;			\
-	or		REG1, %lo(swapper_tsb), REG1; \
+661:	sethi		%uhi(swapper_tsb), REG1; \
+	sethi		%hi(swapper_tsb), REG2; \
+	or		REG1, %ulo(swapper_tsb), REG1; \
+	or		REG2, %lo(swapper_tsb), REG2; \
 	.section	.swapper_tsb_phys_patch, "ax"; \
 	.word		661b; \
 	.previous; \
-661:	nop; \
-	.section	.tsb_ldquad_phys_patch, "ax"; \
-	.word		661b; \
-	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
-	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
-	.previous; \
+	sllx		REG1, 32, REG1; \
+	or		REG1, REG2, REG1; \
 	srlx		VADDR, PAGE_SHIFT, REG2; \
 	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
 	sllx		REG2, 4, REG2; \
@@ -291,17 +287,15 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
 	 * we can make use of that for the index computation.
 	 */
 #define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
-661:	sethi		%hi(swapper_4m_tsb), REG1;	     \
-	or		REG1, %lo(swapper_4m_tsb), REG1; \
+661:	sethi		%uhi(swapper_4m_tsb), REG1; \
+	sethi		%hi(swapper_4m_tsb), REG2; \
+	or		REG1, %ulo(swapper_4m_tsb), REG1; \
+	or		REG2, %lo(swapper_4m_tsb), REG2; \
 	.section	.swapper_4m_tsb_phys_patch, "ax"; \
 	.word		661b; \
 	.previous; \
-661:	nop; \
-	.section	.tsb_ldquad_phys_patch, "ax"; \
-	.word		661b; \
-	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
-	sllx		REG1, KTSB_PHYS_SHIFT, REG1; \
-	.previous; \
+	sllx		REG1, 32, REG1; \
+	or		REG1, REG2, REG1; \
 	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
 	sllx		REG2, 4, REG2; \
 	add		REG1, REG2, REG2; \
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index c241c57233735fe8aa5b801c99e79fa9fda878f9..35fcc9cb960d9e8caf25145742bc41e410afadb4 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1733,19 +1733,41 @@ static void __init tsb_phys_patch(void)
 static struct hv_tsb_descr ktsb_descr[NUM_KTSB_DESCR];
 extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES];
 
+/* The swapper TSBs are loaded with a base sequence of:
+ *
+ *	sethi	%uhi(SYMBOL), REG1
+ *	sethi	%hi(SYMBOL), REG2
+ *	or	REG1, %ulo(SYMBOL), REG1
+ *	or	REG2, %lo(SYMBOL), REG2
+ *	sllx	REG1, 32, REG1
+ *	or	REG1, REG2, REG1
+ *
+ * When we use physical addressing for the TSB accesses, we patch the
+ * first four instructions in the above sequence.
+ */
+
 static void patch_one_ktsb_phys(unsigned int *start, unsigned int *end, unsigned long pa)
 {
-	pa >>= KTSB_PHYS_SHIFT;
+	unsigned long high_bits, low_bits;
+
+	high_bits = (pa >> 32) & 0xffffffff;
+	low_bits = (pa >> 0) & 0xffffffff;
 
 	while (start < end) {
 		unsigned int *ia = (unsigned int *)(unsigned long)*start;
 
-		ia[0] = (ia[0] & ~0x3fffff) | (pa >> 10);
+		ia[0] = (ia[0] & ~0x3fffff) | (high_bits >> 10);
 		__asm__ __volatile__("flush	%0" : : "r" (ia));
 
-		ia[1] = (ia[1] & ~0x3ff) | (pa & 0x3ff);
+		ia[1] = (ia[1] & ~0x3fffff) | (low_bits >> 10);
 		__asm__ __volatile__("flush	%0" : : "r" (ia + 1));
 
+		ia[2] = (ia[2] & ~0x1fff) | (high_bits & 0x3ff);
+		__asm__ __volatile__("flush	%0" : : "r" (ia + 2));
+
+		ia[3] = (ia[3] & ~0x1fff) | (low_bits & 0x3ff);
+		__asm__ __volatile__("flush	%0" : : "r" (ia + 3));
+
 		start++;
 	}
 }