diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b4c4eaa5dd265bbdd4646898a99f63e86e01e315..4da736e25333abc8ce46440dcb8b97c4c9f2be9d 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -3,6 +3,7 @@ config MIPS default y select HAVE_IDE select HAVE_OPROFILE + select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB @@ -34,7 +35,6 @@ config BASLER_EXCITE select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. @@ -280,7 +280,6 @@ config PMC_MSP select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE @@ -306,7 +305,6 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -359,7 +357,6 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -475,7 +472,6 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN select ZONE_DMA32 if 64BIT @@ -868,7 +864,6 @@ config SOC_PNX8550 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ - select SYS_SUPPORTS_KGDB select GENERIC_GPIO config SWAP_IO_SPACE diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index f18cf92650e350d746a299081dfd58dbeb468b34..765c8e287d2b2b45f2687f607c61ecc1d1096cad 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG arch/mips/kernel/smtc.c. This debugging option result in significant overhead so should be disabled in production kernels. -config KGDB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB - select DEBUG_INFO - help - If you say Y here, it will be possible to remotely debug the MIPS - kernel using gdb. This enlarges your kernel image disk size by - several megabytes and requires a machine with more than 16 MB, - better 32 MB RAM to avoid excessive linking time. This is only - useful for kernel hackers. If unsure, say N. - -config SYS_SUPPORTS_KGDB - bool - -config GDB_CONSOLE - bool "Console output to GDB" - depends on KGDB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - config SB1XXX_CORELIS bool "Corelis Debugger" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 1fe97cccead1f7b4d633eba2d273b41204cecd4e..e4a057d80ab6edddaf7f075ef781886833e7a024 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -134,4 +134,3 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index dd0e19dacfcff444ab7b4ff07912ff8b0bcde082..df48fd65bbf3989cfe5e8be4997214277b2a54a3 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_PCI) += pci.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c deleted file mode 100644 index af5be7df2f2a9f379d9c0a06125d20542479029b..0000000000000000000000000000000000000000 --- a/arch/mips/au1000/common/dbg_io.c +++ /dev/null @@ -1,109 +0,0 @@ -#include - -#include - -#ifdef CONFIG_KGDB - -/* - * FIXME the user should be able to select the - * uart to be used for debugging. - */ -#define DEBUG_BASE UART_DEBUG_BASE - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) -#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y)) - -extern unsigned long calc_clock(void); - -void debugInit(u32 baud, u8 data, u8 parity, u8 stop) -{ - if (UART16550_READ(UART_MOD_CNTRL) != 0x3) - UART16550_WRITE(UART_MOD_CNTRL, 3); - calc_clock(); - - /* disable interrupts */ - UART16550_WRITE(UART_IER, 0); - - /* set up baud rate */ - { - u32 divisor; - - /* set divisor */ - divisor = get_au1x00_uart_baud_base() / baud; - UART16550_WRITE(UART_CLK, divisor & 0xffff); - } - - /* set data format */ - UART16550_WRITE(UART_LCR, (data | parity | stop)); -} - -static int remoteDebugInitialized; - -u8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x1) == 0); - return UART16550_READ(UART_RX); -} - - -int putDebugChar(u8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x40) == 0); - UART16550_WRITE(UART_TX, byte); - - return 1; -} - -#endif diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index 5ebe0de5e4590e404e8ba11c2a86730fd38bed16..847413514964f1f83e560fdb6fe53b68442de3b9 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -57,6 +57,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c index 33a4aebe0cba37a33f3d89e918caaa03e1d40673..3bae13c2895494788a13571853ab0c5f77b42429 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/au1000/mtx-1/init.c @@ -55,6 +55,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c index 3837365d613d54bf65b01acff016eb7e805e12e6..8a9c7d57208d2fbf6011e9fb5a390d0f5c62a852 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/au1000/pb1000/init.c @@ -52,6 +52,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c index 8355483f3de2a65503e60ac5801eada3679ee08b..7c6792308bc5b85f372af92adee39811862ad3c7 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/au1000/pb1100/init.c @@ -54,7 +54,7 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index 09fd63b86062060719490113a5ba9cfdee83c74e..e9b2a0fd48ae702135c0af9d1e3057b5de0c8267 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c index 49f51e165863d40e004408b4a1199f16c59d29b1..3b6e395cf952019c41f999a86c6bab6a9f4236cf 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/au1000/pb1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c index 1b5f58434bb78390cad601c8b44bb4bf628a7d46..e1055a13a1a0a108e21cd7dabf8af581226a19bc 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/au1000/pb1550/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index b849bf501c0423fb93d8cb82f3474324b971cca1..7516434760a1c18d6300c3bef3b79002385330e2 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile index 519142c2e4ef31f475349a618ee630f20287fc88..cff29cf46d0353e59d1bb782c712b1ab29901fe6 100644 --- a/arch/mips/basler/excite/Makefile +++ b/arch/mips/basler/excite/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ excite_device.o excite_procfs.o -obj-$(CONFIG_KGDB) += excite_dbg_io.o obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c deleted file mode 100644 index d289e3a868cfad3696d05b97e58fa2c7794507df..0000000000000000000000000000000000000000 --- a/arch/mips/basler/excite/excite_dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1 -#error Debug port used by serial driver -#endif - -#define UART_CLK 25000000 -#define BASE_BAUD (UART_CLK / 16) -#define REGISTER_BASE_0 0x0208UL -#define REGISTER_BASE_1 0x0238UL - -#define REGISTER_BASE_DBG REGISTER_BASE_1 - -#define CPRR 0x0004 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define UARBR (REGISTER_BASE_DBG + 0x0000) -#define UATHR (REGISTER_BASE_DBG + 0x0004) -#define UADLL (REGISTER_BASE_DBG + 0x0008) -#define UAIER (REGISTER_BASE_DBG + 0x000c) -#define UADLH (REGISTER_BASE_DBG + 0x0010) -#define UAIIR (REGISTER_BASE_DBG + 0x0014) -#define UAFCR (REGISTER_BASE_DBG + 0x0018) -#define UALCR (REGISTER_BASE_DBG + 0x001c) -#define UAMCR (REGISTER_BASE_DBG + 0x0020) -#define UALSR (REGISTER_BASE_DBG + 0x0024) -#define UAMSR (REGISTER_BASE_DBG + 0x0028) -#define UASCR (REGISTER_BASE_DBG + 0x002c) - -#define PARITY_NONE 0 -#define PARITY_ODD 0x08 -#define PARITY_EVEN 0x18 -#define PARITY_MARK 0x28 -#define PARITY_SPACE 0x38 - -#define DATA_5BIT 0x0 -#define DATA_6BIT 0x1 -#define DATA_7BIT 0x2 -#define DATA_8BIT 0x3 - -#define STOP_1BIT 0x0 -#define STOP_2BIT 0x4 - -#define BAUD_DBG 57600 -#define PARITY_DBG PARITY_NONE -#define DATA_DBG DATA_8BIT -#define STOP_DBG STOP_1BIT - -/* Initialize the serial port for KGDB debugging */ -void __init excite_kgdb_init(void) -{ - const u32 divisor = BASE_BAUD / BAUD_DBG; - - /* Take the UART out of reset */ - titan_writel(0x00ff1cff, CPRR); - titan_writel(0x00000000, UACFG); - titan_writel(0x00000002, UACFG); - - titan_writel(0x0, UALCR); - titan_writel(0x0, UAIER); - - /* Disable FIFOs */ - titan_writel(0x00, UAFCR); - - titan_writel(0x80, UALCR); - titan_writel(divisor & 0xff, UADLL); - titan_writel((divisor & 0xff00) >> 8, UADLH); - titan_writel(0x0, UALCR); - - titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR); - - /* Enable receiver interrupt */ - titan_readl(UARBR); - titan_writel(0x1, UAIER); -} - -int getDebugChar(void) -{ - while (!(titan_readl(UALSR) & 0x1)); - return titan_readl(UARBR); -} - -int putDebugChar(int data) -{ - while (!(titan_readl(UALSR) & 0x20)); - titan_writel(data, UATHR); - return 1; -} - -/* KGDB interrupt handler */ -asmlinkage void excite_kgdb_inthdl(void) -{ - if (unlikely( - ((titan_readl(UAIIR) & 0x7) == 4) - && ((titan_readl(UARBR) & 0xff) == 0x3))) - set_async_breakpoint(®s->cp0_epc); -} diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c index 4903e067916b4b5badaca3f2b44bfb2d8c3cbe8d..934e0a6b1011e5e137dde54423611698a84ac801 100644 --- a/arch/mips/basler/excite/excite_irq.c +++ b/arch/mips/basler/excite/excite_irq.c @@ -50,10 +50,6 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); - -#ifdef CONFIG_KGDB - excite_kgdb_init(); -#endif } asmlinkage void plat_irq_dispatch(void) @@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void) msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); if ((pending & (1 << TITAN_IRQ)) && msgint) { ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); -#if defined(CONFIG_KGDB) - excite_kgdb_inthdl(); -#endif do_IRQ(TITAN_IRQ); return; } diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 6dd8f0d46d096f1b8ad57d0510abed786bb09b42..d66b3b8edf2a10723ab947437faa93272275b632 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -95,13 +95,13 @@ static int __init excite_init_console(void) /* Take the DUART out of reset */ titan_writel(0x00ff1cff, CPRR); -#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1) +#if (CONFIG_SERIAL_8250_NR_UARTS > 1) /* Enable both ports */ titan_writel(MASK_SER0 | MASK_SER1, UACFG); #else /* Enable port #0 only */ titan_writel(MASK_SER0, UACFG); -#endif /* defined(CONFIG_KGDB) */ +#endif /* * Set up serial port #0. Do not use autodetection; the result is diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 2678b7ec335197d9c938071f093ead61e2d509d2..eb44b72254afe26088bc921e3f2331057a065f10 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc5 -# Thu Sep 6 13:14:29 2007 +# Linux kernel version: 2.6.26 +# Fri Jul 25 10:25:34 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_GT641XX=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y @@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -177,23 +198,37 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_I8253=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -250,6 +285,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -337,6 +372,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -475,7 +520,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -504,7 +548,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -518,29 +564,27 @@ CONFIG_ATA=y CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -562,7 +606,12 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -572,6 +621,7 @@ CONFIG_TULIP=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -580,7 +630,6 @@ CONFIG_TULIP=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -588,7 +637,6 @@ CONFIG_TULIP=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -642,7 +689,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -CONFIG_COBALT_LCD=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_COBALT=y +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -751,15 +858,18 @@ CONFIG_USB=m # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -833,16 +942,10 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +CONFIG_EXT4DEV_FS_XATTR=y +CONFIG_EXT4DEV_FS_POSIX_ACL=y +CONFIG_EXT4DEV_FS_SECURITY=y CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -967,7 +1057,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # @@ -1057,14 +1134,95 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index ebb8ad62b3a3cac9dd4c3723ccd7012d6d66d526..a279165e3a7d3899b9fae53a7323f4e3df3b3781 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index ad4e5ef65592efbf80c3cc769bb68f865f1c91de..8944d15caf13145866a136710597dab3c915b704 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d0dc2e83ad35aadac3d848a0db067f2c764f76be..ab17973107fde80e44e217b696cbf73757297f62 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 9155082313c891ffa5eaf61234cfecfbb90bc38f..b65803f19352724866354ba61d5b53a54d1a17f2 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index e4e324422cd96d2c02cc1976fae34b58518164e9..a190ac07740b31dcdc935701ebc30d02c87f9bc4 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 3572e80356d2e8c26088795677d5cfb4189d752d..4e465e94599179a79f53769789cc0b3830aa0a40 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 138c575a0151668ded722068f6ebc7c658cd6a10..831d3e5a1ea6ba976d04f0febdd7793f51b367a0 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 59d19472b161b621bfbe41db03f91809176f21c1..dd13db4d0fb98efec3a5c56f427cfd7f26185355 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index bacf0dd0e3457a2f37447a131a51d7168b77ca1f..db9272677aa2dd2b26e98f01caf21cae5f656bf7 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 6dfe6f793cef62fdaf92fb22f452cdba1a0ef100..9e21e333a2fc66efaef996f0198718f8b46ed15c 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index c965a87e6a963dd1f80c962a3490d590aca0259f..af67ed4f71ae8bf3ad06f44e4a829c84b53cb528 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 0778996c682fbcf1ff81f97b8e3bc0cc64e4296b..7956f56cbf3ed0dd1a9ca825d4b3651ed5c15195 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 37c7b5ffd474afa5d3483137efcc56c0dee6f5ef..723bd5176a358a7a1993335c931223be403d2c18 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 893e5c4ab66d55a1af9a21881f6ef22a3d6d9ce2..b5052fb42e9ef11475960579564c7268fbb1808e 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index e42aed5a38bb8cba5008474475cf48b603ccaf1d..c7c0864b8ce98053a70a7fc576dc7f75c64793a5 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 1ea97865f2cead680c0670397b34ec735bbb7d08..a9acaa2f9da3e6bc31a81ab2a729c6955b5db523 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 7f86c43d1bdaaa14b291b84473236782806790c1..ea8249c75b3f8e0ed37f4f3133dacdf5b3014fb0 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c index 11567702b155460a84adcbf9b08bca3c6c280a97..d70627de7cfe953764ae786304d0e89b73c1e178 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma2rh/markeins/platform.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 62bfb455d1b11c9edb89ab6d1683c0aaf6b20fef..a56c4b804b07c10821a2dfb9aaf5f8b8518e29e7 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0fd31974ba28b2e9da37b936e041305adc9dcd81..706f9397479770265d69b0307df9d76ea3739178 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o -obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S deleted file mode 100644 index 2c446063636aeda90de92e07d44bbafd521255f2..0000000000000000000000000000000000000000 --- a/arch/mips/kernel/gdb-low.S +++ /dev/null @@ -1,394 +0,0 @@ -/* - * gdb-low.S contains the low-level trap handler for the GDB stub. - * - * Copyright (C) 1995 Andreas Busse - */ -#include - -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_32BIT -#define DMFC0 mfc0 -#define DMTC0 mtc0 -#define LDC1 lwc1 -#define SDC1 lwc1 -#endif -#ifdef CONFIG_64BIT -#define DMFC0 dmfc0 -#define DMTC0 dmtc0 -#define LDC1 ldc1 -#define SDC1 ldc1 -#endif - -/* - * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed) - * part is used to store registers and passed to exception handler. - * The upper part is reserved for "call func" feature where gdb client - * saves some of the regs, setups call frame and passes args. - * - * A trace shows about 200 bytes are used to store about half of all regs. - * The rest should be big enough for frame setup and passing args. - */ - -/* - * The low level trap handler - */ - .align 5 - NESTED(trap_low, GDB_FR_SIZE, sp) - .set noat - .set noreorder - - mfc0 k0, CP0_STATUS - sll k0, 3 /* extract cu0 bit */ - bltz k0, 1f - move k1, sp - - /* - * Called from user mode, go somewhere else. - */ - mfc0 k0, CP0_CAUSE - andi k0, k0, 0x7c -#ifdef CONFIG_64BIT - dsll k0, k0, 1 -#endif - PTR_L k1, saved_vectors(k0) - jr k1 - nop -1: - move k0, sp - PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above - LONG_S k0, GDB_FR_REG29(sp) - LONG_S $2, GDB_FR_REG2(sp) - -/* - * First save the CP0 and special registers - */ - - mfc0 v0, CP0_STATUS - LONG_S v0, GDB_FR_STATUS(sp) - mfc0 v0, CP0_CAUSE - LONG_S v0, GDB_FR_CAUSE(sp) - DMFC0 v0, CP0_EPC - LONG_S v0, GDB_FR_EPC(sp) - DMFC0 v0, CP0_BADVADDR - LONG_S v0, GDB_FR_BADVADDR(sp) - mfhi v0 - LONG_S v0, GDB_FR_HI(sp) - mflo v0 - LONG_S v0, GDB_FR_LO(sp) - -/* - * Now the integer registers - */ - - LONG_S zero, GDB_FR_REG0(sp) /* I know... */ - LONG_S $1, GDB_FR_REG1(sp) - /* v0 already saved */ - LONG_S $3, GDB_FR_REG3(sp) - LONG_S $4, GDB_FR_REG4(sp) - LONG_S $5, GDB_FR_REG5(sp) - LONG_S $6, GDB_FR_REG6(sp) - LONG_S $7, GDB_FR_REG7(sp) - LONG_S $8, GDB_FR_REG8(sp) - LONG_S $9, GDB_FR_REG9(sp) - LONG_S $10, GDB_FR_REG10(sp) - LONG_S $11, GDB_FR_REG11(sp) - LONG_S $12, GDB_FR_REG12(sp) - LONG_S $13, GDB_FR_REG13(sp) - LONG_S $14, GDB_FR_REG14(sp) - LONG_S $15, GDB_FR_REG15(sp) - LONG_S $16, GDB_FR_REG16(sp) - LONG_S $17, GDB_FR_REG17(sp) - LONG_S $18, GDB_FR_REG18(sp) - LONG_S $19, GDB_FR_REG19(sp) - LONG_S $20, GDB_FR_REG20(sp) - LONG_S $21, GDB_FR_REG21(sp) - LONG_S $22, GDB_FR_REG22(sp) - LONG_S $23, GDB_FR_REG23(sp) - LONG_S $24, GDB_FR_REG24(sp) - LONG_S $25, GDB_FR_REG25(sp) - LONG_S $26, GDB_FR_REG26(sp) - LONG_S $27, GDB_FR_REG27(sp) - LONG_S $28, GDB_FR_REG28(sp) - /* sp already saved */ - LONG_S $30, GDB_FR_REG30(sp) - LONG_S $31, GDB_FR_REG31(sp) - - CLI /* disable interrupts */ - TRACE_IRQS_OFF - -/* - * Followed by the floating point registers - */ - mfc0 v0, CP0_STATUS /* FPU enabled? */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0,2f /* disabled, skip */ - nop - - SDC1 $0, GDB_FR_FPR0(sp) - SDC1 $1, GDB_FR_FPR1(sp) - SDC1 $2, GDB_FR_FPR2(sp) - SDC1 $3, GDB_FR_FPR3(sp) - SDC1 $4, GDB_FR_FPR4(sp) - SDC1 $5, GDB_FR_FPR5(sp) - SDC1 $6, GDB_FR_FPR6(sp) - SDC1 $7, GDB_FR_FPR7(sp) - SDC1 $8, GDB_FR_FPR8(sp) - SDC1 $9, GDB_FR_FPR9(sp) - SDC1 $10, GDB_FR_FPR10(sp) - SDC1 $11, GDB_FR_FPR11(sp) - SDC1 $12, GDB_FR_FPR12(sp) - SDC1 $13, GDB_FR_FPR13(sp) - SDC1 $14, GDB_FR_FPR14(sp) - SDC1 $15, GDB_FR_FPR15(sp) - SDC1 $16, GDB_FR_FPR16(sp) - SDC1 $17, GDB_FR_FPR17(sp) - SDC1 $18, GDB_FR_FPR18(sp) - SDC1 $19, GDB_FR_FPR19(sp) - SDC1 $20, GDB_FR_FPR20(sp) - SDC1 $21, GDB_FR_FPR21(sp) - SDC1 $22, GDB_FR_FPR22(sp) - SDC1 $23, GDB_FR_FPR23(sp) - SDC1 $24, GDB_FR_FPR24(sp) - SDC1 $25, GDB_FR_FPR25(sp) - SDC1 $26, GDB_FR_FPR26(sp) - SDC1 $27, GDB_FR_FPR27(sp) - SDC1 $28, GDB_FR_FPR28(sp) - SDC1 $29, GDB_FR_FPR29(sp) - SDC1 $30, GDB_FR_FPR30(sp) - SDC1 $31, GDB_FR_FPR31(sp) - -/* - * FPU control registers - */ - - cfc1 v0, CP1_STATUS - LONG_S v0, GDB_FR_FSR(sp) - cfc1 v0, CP1_REVISION - LONG_S v0, GDB_FR_FIR(sp) - -/* - * Current stack frame ptr - */ - -2: - LONG_S sp, GDB_FR_FRP(sp) - -/* - * CP0 registers (R4000/R4400 unused registers skipped) - */ - - mfc0 v0, CP0_INDEX - LONG_S v0, GDB_FR_CP0_INDEX(sp) - mfc0 v0, CP0_RANDOM - LONG_S v0, GDB_FR_CP0_RANDOM(sp) - DMFC0 v0, CP0_ENTRYLO0 - LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp) - DMFC0 v0, CP0_ENTRYLO1 - LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp) - DMFC0 v0, CP0_CONTEXT - LONG_S v0, GDB_FR_CP0_CONTEXT(sp) - mfc0 v0, CP0_PAGEMASK - LONG_S v0, GDB_FR_CP0_PAGEMASK(sp) - mfc0 v0, CP0_WIRED - LONG_S v0, GDB_FR_CP0_WIRED(sp) - DMFC0 v0, CP0_ENTRYHI - LONG_S v0, GDB_FR_CP0_ENTRYHI(sp) - mfc0 v0, CP0_PRID - LONG_S v0, GDB_FR_CP0_PRID(sp) - - .set at - -/* - * Continue with the higher level handler - */ - - move a0,sp - - jal handle_exception - nop - -/* - * Restore all writable registers, in reverse order - */ - - .set noat - - LONG_L v0, GDB_FR_CP0_ENTRYHI(sp) - LONG_L v1, GDB_FR_CP0_WIRED(sp) - DMTC0 v0, CP0_ENTRYHI - mtc0 v1, CP0_WIRED - LONG_L v0, GDB_FR_CP0_PAGEMASK(sp) - LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp) - mtc0 v0, CP0_PAGEMASK - DMTC0 v1, CP0_ENTRYLO1 - LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp) - LONG_L v1, GDB_FR_CP0_INDEX(sp) - DMTC0 v0, CP0_ENTRYLO0 - LONG_L v0, GDB_FR_CP0_CONTEXT(sp) - mtc0 v1, CP0_INDEX - DMTC0 v0, CP0_CONTEXT - - -/* - * Next, the floating point registers - */ - mfc0 v0, CP0_STATUS /* check if the FPU is enabled */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0, 3f /* disabled, skip */ - nop - - LDC1 $31, GDB_FR_FPR31(sp) - LDC1 $30, GDB_FR_FPR30(sp) - LDC1 $29, GDB_FR_FPR29(sp) - LDC1 $28, GDB_FR_FPR28(sp) - LDC1 $27, GDB_FR_FPR27(sp) - LDC1 $26, GDB_FR_FPR26(sp) - LDC1 $25, GDB_FR_FPR25(sp) - LDC1 $24, GDB_FR_FPR24(sp) - LDC1 $23, GDB_FR_FPR23(sp) - LDC1 $22, GDB_FR_FPR22(sp) - LDC1 $21, GDB_FR_FPR21(sp) - LDC1 $20, GDB_FR_FPR20(sp) - LDC1 $19, GDB_FR_FPR19(sp) - LDC1 $18, GDB_FR_FPR18(sp) - LDC1 $17, GDB_FR_FPR17(sp) - LDC1 $16, GDB_FR_FPR16(sp) - LDC1 $15, GDB_FR_FPR15(sp) - LDC1 $14, GDB_FR_FPR14(sp) - LDC1 $13, GDB_FR_FPR13(sp) - LDC1 $12, GDB_FR_FPR12(sp) - LDC1 $11, GDB_FR_FPR11(sp) - LDC1 $10, GDB_FR_FPR10(sp) - LDC1 $9, GDB_FR_FPR9(sp) - LDC1 $8, GDB_FR_FPR8(sp) - LDC1 $7, GDB_FR_FPR7(sp) - LDC1 $6, GDB_FR_FPR6(sp) - LDC1 $5, GDB_FR_FPR5(sp) - LDC1 $4, GDB_FR_FPR4(sp) - LDC1 $3, GDB_FR_FPR3(sp) - LDC1 $2, GDB_FR_FPR2(sp) - LDC1 $1, GDB_FR_FPR1(sp) - LDC1 $0, GDB_FR_FPR0(sp) - -/* - * Now the CP0 and integer registers - */ - -3: -#ifdef CONFIG_MIPS_MT_SMTC - /* Read-modify write of Status must be atomic */ - mfc0 t2, CP0_TCSTATUS - ori t1, t2, TCSTATUS_IXMT - mtc0 t1, CP0_TCSTATUS - andi t2, t2, TCSTATUS_IXMT - _ehb - DMT 9 # dmt t1 - jal mips_ihb - nop -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 t0, CP0_STATUS - ori t0, 0x1f - xori t0, 0x1f - mtc0 t0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - andi t1, t1, VPECONTROL_TE - beqz t1, 9f - nop - EMT # emt -9: - mfc0 t1, CP0_TCSTATUS - xori t1, t1, TCSTATUS_IXMT - or t1, t1, t2 - mtc0 t1, CP0_TCSTATUS - _ehb -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_L v0, GDB_FR_STATUS(sp) - LONG_L v1, GDB_FR_EPC(sp) - mtc0 v0, CP0_STATUS - DMTC0 v1, CP0_EPC - LONG_L v0, GDB_FR_HI(sp) - LONG_L v1, GDB_FR_LO(sp) - mthi v0 - mtlo v1 - LONG_L $31, GDB_FR_REG31(sp) - LONG_L $30, GDB_FR_REG30(sp) - LONG_L $28, GDB_FR_REG28(sp) - LONG_L $27, GDB_FR_REG27(sp) - LONG_L $26, GDB_FR_REG26(sp) - LONG_L $25, GDB_FR_REG25(sp) - LONG_L $24, GDB_FR_REG24(sp) - LONG_L $23, GDB_FR_REG23(sp) - LONG_L $22, GDB_FR_REG22(sp) - LONG_L $21, GDB_FR_REG21(sp) - LONG_L $20, GDB_FR_REG20(sp) - LONG_L $19, GDB_FR_REG19(sp) - LONG_L $18, GDB_FR_REG18(sp) - LONG_L $17, GDB_FR_REG17(sp) - LONG_L $16, GDB_FR_REG16(sp) - LONG_L $15, GDB_FR_REG15(sp) - LONG_L $14, GDB_FR_REG14(sp) - LONG_L $13, GDB_FR_REG13(sp) - LONG_L $12, GDB_FR_REG12(sp) - LONG_L $11, GDB_FR_REG11(sp) - LONG_L $10, GDB_FR_REG10(sp) - LONG_L $9, GDB_FR_REG9(sp) - LONG_L $8, GDB_FR_REG8(sp) - LONG_L $7, GDB_FR_REG7(sp) - LONG_L $6, GDB_FR_REG6(sp) - LONG_L $5, GDB_FR_REG5(sp) - LONG_L $4, GDB_FR_REG4(sp) - LONG_L $3, GDB_FR_REG3(sp) - LONG_L $2, GDB_FR_REG2(sp) - LONG_L $1, GDB_FR_REG1(sp) -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - LONG_L k0, GDB_FR_EPC(sp) - LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */ - jr k0 - rfe -#else - LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */ - - .set mips3 - eret - .set mips0 -#endif - .set at - .set reorder - END(trap_low) - -LEAF(kgdb_read_byte) -4: lb t0, (a0) - sb t0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 4b, kgdbfault - .previous - END(kgdb_read_byte) - -LEAF(kgdb_write_byte) -5: sb a0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 5b, kgdbfault - .previous - END(kgdb_write_byte) - - .type kgdbfault@function - .ent kgdbfault - -kgdbfault: li v0, -EFAULT - jr ra - .end kgdbfault diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c deleted file mode 100644 index 25f4eab8ea9cad18dc2339969d482d83e4c1e1f0..0000000000000000000000000000000000000000 --- a/arch/mips/kernel/gdb-stub.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * arch/mips/kernel/gdb-stub.c - * - * Originally written by Glenn Engel, Lake Stevens Instrument Division - * - * Contributed by HP Systems - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * - * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse - * Send complaints, suggestions etc. to - * - * Copyright (C) 1995 Andreas Busse - * - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $#. - * - * where - * :: - * :: < two hex digits computed as modulo 256 sum of > - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=mips-linux-elf - * $ make - * $ install - * $ which mips-linux-elf-gdb - * /usr/local/bin/mips-linux-elf-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig - * $ make - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_KGDB which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ mips-linux-elf-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -/* - * external low-level support routines - */ - -extern int putDebugChar(char c); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ -extern void trap_low(void); - -/* - * breakpoint and test functions - */ -extern void breakpoint(void); -extern void breakinst(void); -extern void async_breakpoint(void); -extern void async_breakinst(void); -extern void adel(void); - -/* - * local prototypes - */ - -static void getpacket(char *buffer); -static void putpacket(char *buffer); -static int computeSignal(int tt); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, int *intValue); -static int hexToLong(char **ptr, long *longValue); -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); -void handle_exception(struct gdb_regs *regs); - -int kgdb_enabled; - -/* - * spin locks for smp case - */ -static DEFINE_SPINLOCK(kgdb_lock); -static raw_spinlock_t kgdb_cpulock[NR_CPUS] = { - [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED, -}; - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; -static int initialized; /* !0 means we've been initialized */ -static int kgdb_started; -static const char hexchars[]="0123456789abcdef"; - -/* Used to prevent crashes in memory access. Note that they'll crash anyway if - we haven't set up fault handlers yet... */ -int kgdb_read_byte(unsigned char *address, unsigned char *dest); -int kgdb_write_byte(unsigned char val, unsigned char *dest); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -/* - * scan for the sequence $# - */ -static void getpacket(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int i; - int count; - unsigned char ch; - - do { - /* - * wait around for the start character, - * ignore all other characters - */ - while ((ch = (getDebugChar() & 0x7f)) != '$') ; - - checksum = 0; - xmitcsum = -1; - count = 0; - - /* - * now, read until a # or end of buffer is found - */ - while (count < BUFMAX) { - ch = getDebugChar(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - - if (count >= BUFMAX) - continue; - - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(getDebugChar() & 0x7f) << 4; - xmitcsum |= hex(getDebugChar() & 0x7f); - - if (checksum != xmitcsum) - putDebugChar('-'); /* failed checksum */ - else { - putDebugChar('+'); /* successful transfer */ - - /* - * if a sequence char is present, - * reply the sequence ID - */ - if (buffer[2] == ':') { - putDebugChar(buffer[0]); - putDebugChar(buffer[1]); - - /* - * remove sequence chars from buffer - */ - count = strlen(buffer); - for (i=3; i <= count; i++) - buffer[i-3] = buffer[i]; - } - } - } - } - while (checksum != xmitcsum); -} - -/* - * send the packet in buffer. - */ -static void putpacket(char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* - * $#. - */ - - do { - putDebugChar('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - if (!(putDebugChar(ch))) - return; - checksum += ch; - count += 1; - } - - putDebugChar('#'); - putDebugChar(hexchars[checksum >> 4]); - putDebugChar(hexchars[checksum & 0xf]); - - } - while ((getDebugChar() & 0x7f) != '+'); -} - - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null), in case of mem fault, - * return 0. - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault) -{ - unsigned char ch; - - while (count-- > 0) { - if (kgdb_read_byte(mem++, &ch) != 0) - return 0; - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch & 0xf]; - } - - *buf = 0; - - return buf; -} - -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault) -{ - int i; - unsigned char ch; - - for (i=0; itt && ht->signo; ht++) - saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low); - - putDebugChar('+'); /* 'hello world' */ - /* - * In case GDB is started before us, ack any packets - * (presumably "$?#xx") sitting there. - */ - while((c = getDebugChar()) != '$'); - while((c = getDebugChar()) != '#'); - c = getDebugChar(); /* eat first csum byte */ - c = getDebugChar(); /* eat second csum byte */ - putDebugChar('+'); /* ack it */ - - initialized = 1; - local_irq_restore(flags); -} - -void restore_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - set_except_vector(ht->tt, saved_vectors[ht->tt]); - local_irq_restore(flags); -} - -/* - * Convert the MIPS hardware trap type code to a Unix signal number. - */ -static int computeSignal(int tt) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - if (ht->tt == tt) - return ht->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return (numChars); -} - -static int hexToLong(char **ptr, long *longValue) -{ - int numChars = 0; - int hexValue; - - *longValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *longValue = (*longValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return numChars; -} - - -#if 0 -/* - * Print registers (on target console) - * Used only to debug the stub... - */ -void show_gdbregs(struct gdb_regs * regs) -{ - /* - * Saved main processor registers - */ - printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg0, regs->reg1, regs->reg2, regs->reg3, - regs->reg4, regs->reg5, regs->reg6, regs->reg7); - printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg8, regs->reg9, regs->reg10, regs->reg11, - regs->reg12, regs->reg13, regs->reg14, regs->reg15); - printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg16, regs->reg17, regs->reg18, regs->reg19, - regs->reg20, regs->reg21, regs->reg22, regs->reg23); - printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg24, regs->reg25, regs->reg26, regs->reg27, - regs->reg28, regs->reg29, regs->reg30, regs->reg31); - - /* - * Saved cp0 registers - */ - printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n", - regs->cp0_epc, regs->cp0_status, regs->cp0_cause); -} -#endif /* dead code */ - -/* - * We single-step by setting breakpoints. When an exception - * is handled, we need to restore the instructions hoisted - * when the breakpoints were set. - * - * This is where we save the original instructions. - */ -static struct gdb_bp_save { - unsigned long addr; - unsigned int val; -} step_bp[2]; - -#define BP 0x0000000d /* break opcode */ - -/* - * Set breakpoint instructions for single stepping. - */ -static void single_step(struct gdb_regs *regs) -{ - union mips_instruction insn; - unsigned long targ; - int is_branch, is_cond, i; - - targ = regs->cp0_epc; - insn.word = *(unsigned int *)targ; - is_branch = is_cond = 0; - - switch (insn.i_format.opcode) { - /* - * jr and jalr are in r_format format. - */ - case spec_op: - switch (insn.r_format.func) { - case jalr_op: - case jr_op: - targ = *(®s->reg0 + insn.r_format.rs); - is_branch = 1; - break; - } - break; - - /* - * This group contains: - * bltz_op, bgez_op, bltzl_op, bgezl_op, - * bltzal_op, bgezal_op, bltzall_op, bgezall_op. - */ - case bcond_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - - /* - * These are unconditional and in j_format. - */ - case jal_op: - case j_op: - is_branch = 1; - targ += 4; - targ >>= 28; - targ <<= 28; - targ |= (insn.j_format.target << 2); - break; - - /* - * These are conditional. - */ - case beq_op: - case beql_op: - case bne_op: - case bnel_op: - case blez_op: - case blezl_op: - case bgtz_op: - case bgtzl_op: - case cop0_op: - case cop1_op: - case cop2_op: - case cop1x_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - } - - if (is_branch) { - i = 0; - if (is_cond && targ != (regs->cp0_epc + 8)) { - step_bp[i].addr = regs->cp0_epc + 8; - step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8); - *(unsigned *)(regs->cp0_epc + 8) = BP; - } - step_bp[i].addr = targ; - step_bp[i].val = *(unsigned *)targ; - *(unsigned *)targ = BP; - } else { - step_bp[0].addr = regs->cp0_epc + 4; - step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4); - *(unsigned *)(regs->cp0_epc + 4) = BP; - } -} - -/* - * If asynchronously interrupted by gdb, then we need to set a breakpoint - * at the interrupted instruction so that we wind up stopped with a - * reasonable stack frame. - */ -static struct gdb_bp_save async_bp; - -/* - * Swap the interrupted EPC with our asynchronous breakpoint routine. - * This is safer than stuffing the breakpoint in-place, since no cache - * flushes (or resulting smp_call_functions) are required. The - * assumption is that only one CPU will be handling asynchronous bp's, - * and only one can be active at a time. - */ -extern spinlock_t smp_call_lock; - -void set_async_breakpoint(unsigned long *epc) -{ - /* skip breaking into userland */ - if ((*epc & 0x80000000) == 0) - return; - -#ifdef CONFIG_SMP - /* avoid deadlock if someone is make IPC */ - if (spin_is_locked(&smp_call_lock)) - return; -#endif - - async_bp.addr = *epc; - *epc = (unsigned long)async_breakpoint; -} - -#ifdef CONFIG_SMP -static void kgdb_wait(void *arg) -{ - unsigned flags; - int cpu = smp_processor_id(); - - local_irq_save(flags); - - __raw_spin_lock(&kgdb_cpulock[cpu]); - __raw_spin_unlock(&kgdb_cpulock[cpu]); - - local_irq_restore(flags); -} -#endif - -/* - * GDB stub needs to call kgdb_wait on all processor with interrupts - * disabled, so it uses it's own special variant. - */ -static int kgdb_smp_call_kgdb_wait(void) -{ -#ifdef CONFIG_SMP - cpumask_t mask = cpu_online_map; - struct call_data_struct data; - int cpu = smp_processor_id(); - int cpus; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - BUG_ON(!cpu_online(cpu)); - - cpu_clear(cpu, mask); - cpus = cpus_weight(mask); - if (!cpus) - return 0; - - if (spin_is_locked(&smp_call_lock)) { - /* - * Some other processor is trying to make us do something - * but we're not going to respond... give up - */ - return -1; - } - - /* - * We will continue here, accepting the fact that - * the kernel may deadlock if another CPU attempts - * to call smp_call_function now... - */ - - data.func = kgdb_wait; - data.info = NULL; - atomic_set(&data.started, 0); - data.wait = 0; - - spin_lock(&smp_call_lock); - call_data = &data; - mb(); - - core_send_ipi_mask(mask, SMP_CALL_FUNCTION); - - /* Wait for response */ - /* FIXME: lock-up detection, backtrace on lock-up */ - while (atomic_read(&data.started) != cpus) - barrier(); - - call_data = NULL; - spin_unlock(&smp_call_lock); -#endif - - return 0; -} - -/* - * This function does all command processing for interfacing to gdb. It - * returns 1 if you should skip the instruction at the trap address, 0 - * otherwise. - */ -void handle_exception(struct gdb_regs *regs) -{ - int trap; /* Trap type */ - int sigval; - long addr; - int length; - char *ptr; - unsigned long *stack; - int i; - int bflag = 0; - - kgdb_started = 1; - - /* - * acquire the big kgdb spinlock - */ - if (!spin_trylock(&kgdb_lock)) { - /* - * some other CPU has the lock, we should go back to - * receive the gdb_wait IPC - */ - return; - } - - /* - * If we're in async_breakpoint(), restore the real EPC from - * the breakpoint. - */ - if (regs->cp0_epc == (unsigned long)async_breakinst) { - regs->cp0_epc = async_bp.addr; - async_bp.addr = 0; - } - - /* - * acquire the CPU spinlocks - */ - for_each_online_cpu(i) - if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0) - panic("kgdb: couldn't get cpulock %d\n", i); - - /* - * force other cpus to enter kgdb - */ - kgdb_smp_call_kgdb_wait(); - - /* - * If we're in breakpoint() increment the PC - */ - trap = (regs->cp0_cause & 0x7c) >> 2; - if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst) - regs->cp0_epc += 4; - - /* - * If we were single_stepping, restore the opcodes hoisted - * for the breakpoint[s]. - */ - if (step_bp[0].addr) { - *(unsigned *)step_bp[0].addr = step_bp[0].val; - step_bp[0].addr = 0; - - if (step_bp[1].addr) { - *(unsigned *)step_bp[1].addr = step_bp[1].val; - step_bp[1].addr = 0; - } - } - - stack = (long *)regs->reg29; /* stack ptr */ - sigval = computeSignal(trap); - - /* - * reply to host that an exception has occurred - */ - ptr = output_buffer; - - /* - * Send trap type (converted to signal) - */ - *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; - - /* - * Send Error PC - */ - *ptr++ = hexchars[REG_EPC >> 4]; - *ptr++ = hexchars[REG_EPC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - *ptr++ = hexchars[REG_FP >> 4]; - *ptr++ = hexchars[REG_FP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - *ptr++ = hexchars[REG_SP >> 4]; - *ptr++ = hexchars[REG_SP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0); - *ptr++ = ';'; - - *ptr++ = 0; - putpacket(output_buffer); /* send it off... */ - - /* - * Wait for input from remote GDB - */ - while (1) { - output_buffer[0] = 0; - getpacket(input_buffer); - - switch (input_buffer[0]) - { - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; - output_buffer[3] = 0; - break; - - /* - * Detach debugger; let CPU run - */ - case 'D': - putpacket(output_buffer); - goto finish_kgdb; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* - * Return the value of the CPU registers - */ - case 'g': - ptr = output_buffer; - ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */ - ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */ - ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */ - ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */ - ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */ - ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */ - break; - - /* - * set the value of the CPU registers - return OK - */ - case 'G': - { - ptr = &input_buffer[1]; - hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0); - ptr += 6*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0); - strcpy(output_buffer, "OK"); - } - break; - - /* - * mAA..AA,LLLL Read LLLL bytes at address AA..AA - */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length)) { - if (mem2hex((char *)addr, output_buffer, length, 1)) - break; - strcpy(output_buffer, "E03"); - } else - strcpy(output_buffer, "E01"); - break; - - /* - * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA - */ - case 'X': - bflag = 1; - /* fall through */ - - /* - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK - */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length) - && *ptr++ == ':') { - if (hex2mem(ptr, (char *)addr, length, bflag, 1)) - strcpy(output_buffer, "OK"); - else - strcpy(output_buffer, "E03"); - } - else - strcpy(output_buffer, "E02"); - break; - - /* - * cAA..AA Continue at address AA..AA(optional) - */ - case 'c': - /* try to read optional parameter, pc unchanged if no parm */ - - ptr = &input_buffer[1]; - if (hexToLong(&ptr, &addr)) - regs->cp0_epc = addr; - - goto exit_kgdb_exception; - break; - - /* - * kill the program; let us try to restart the machine - * Reset the whole machine. - */ - case 'k': - case 'r': - machine_restart("kgdb restarts machine"); - break; - - /* - * Step to next instruction - */ - case 's': - /* - * There is no single step insn in the MIPS ISA, so we - * use breakpoints and continue, instead. - */ - single_step(regs); - goto exit_kgdb_exception; - /* NOTREACHED */ - break; - - /* - * Set baud rate (bBB) - * FIXME: Needs to be written - */ - case 'b': - { -#if 0 - int baudrate; - extern void set_timer_3(); - - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &baudrate)) - { - strcpy(output_buffer, "B01"); - break; - } - - /* Convert baud rate to uart clock divider */ - - switch (baudrate) - { - case 38400: - baudrate = 16; - break; - case 19200: - baudrate = 33; - break; - case 9600: - baudrate = 65; - break; - default: - baudrate = 0; - strcpy(output_buffer, "B02"); - goto x1; - } - - if (baudrate) { - putpacket("OK"); /* Ack before changing speed */ - set_timer_3(baudrate); /* Set it */ - } -#endif - } - break; - - } /* switch */ - - /* - * reply to the request - */ - - putpacket(output_buffer); - - } /* while */ - - return; - -finish_kgdb: - restore_debug_traps(); - -exit_kgdb_exception: - /* release locks so other CPUs can go */ - for_each_online_cpu(i) - __raw_spin_unlock(&kgdb_cpulock[i]); - spin_unlock(&kgdb_lock); - - __flush_cache_all(); - return; -} - -/* - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void breakpoint(void) -{ - if (!initialized) - return; - - __asm__ __volatile__( - ".globl breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -/* Nothing but the break; don't pollute any registers */ -void async_breakpoint(void) -{ - __asm__ __volatile__( - ".globl async_breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "async_breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -void adel(void) -{ - __asm__ __volatile__( - ".globl\tadel\n\t" - "lui\t$8,0x8000\n\t" - "lw\t$9,1($8)\n\t" - ); -} - -/* - * malloc is needed by gdb client in "call func()", even a private one - * will make gdb happy - */ -static void __used *malloc(size_t size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -static void __used free(void *where) -{ - kfree(where); -} - -#ifdef CONFIG_GDB_CONSOLE - -void gdb_putsn(const char *str, int l) -{ - char outbuf[18]; - - if (!kgdb_started) - return; - - outbuf[0]='O'; - - while(l) { - int i = (l>8)?8:l; - mem2hex((char *)str, &outbuf[1], i, 0); - outbuf[(i*2)+1]=0; - putpacket(outbuf); - str += i; - l -= i; - } -} - -static void gdb_console_write(struct console *con, const char *s, unsigned n) -{ - gdb_putsn(s, n); -} - -static struct console gdb_console = { - .name = "gdb", - .write = gdb_console_write, - .flags = CON_PRINTBUFFER, - .index = -1 -}; - -static int __init register_gdb_console(void) -{ - register_console(&gdb_console); - - return 0; -} - -console_initcall(register_gdb_console); - -#endif diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 6045b9a51a35f74e218db115dc98b4554670b1e2..4b4007b3083a8f881cef80371e68a2a688c55f32 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -21,11 +21,16 @@ #include #include #include +#include #include #include #include +#ifdef CONFIG_KGDB +int kgdb_early_setup; +#endif + static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; int allocate_irqno(void) @@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void) atomic_inc(&irq_err_count); } -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); - -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); -#endif - void __init init_IRQ(void) { int i; +#ifdef CONFIG_KGDB + if (kgdb_early_setup) + return; +#endif + for (i = 0; i < NR_IRQS; i++) set_irq_noprobe(i); arch_init_irq(); #ifdef CONFIG_KGDB - if (kgdb_flag) { - printk("Wait for gdb client connection ...\n"); - set_debug_traps(); - breakpoint(); - } + if (!kgdb_early_setup) + kgdb_early_setup = 1; #endif } diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c new file mode 100644 index 0000000000000000000000000000000000000000..c5a8b2d21ca4c0b76dd71d5097a2eb20e596dc0a --- /dev/null +++ b/arch/mips/kernel/kgdb.c @@ -0,0 +1,281 @@ +/* + * Originally written by Glenn Engel, Lake Stevens Instrument Division + * + * Contributed by HP Systems + * + * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse + * Send complaints, suggestions etc. to + * + * Copyright (C) 1995 Andreas Busse + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Copyright (C) 2004-2005 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com + * + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include /* for linux pt_regs struct */ +#include +#include +#include +#include +#include +#include +#include +#include + +static struct hard_trap_info { + unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 6, SIGBUS }, /* instruction bus error */ + { 7, SIGBUS }, /* data bus error */ + { 9, SIGTRAP }, /* break */ +/* { 11, SIGILL }, */ /* CPU unusable */ + { 12, SIGFPE }, /* overflow */ + { 13, SIGTRAP }, /* trap */ + { 14, SIGSEGV }, /* virtual instruction cache coherency */ + { 15, SIGFPE }, /* floating point exception */ + { 23, SIGSEGV }, /* watch */ + { 31, SIGSEGV }, /* virtual data cache coherency */ + { 0, 0} /* Must be last */ +}; + +void arch_kgdb_breakpoint(void) +{ + __asm__ __volatile__( + ".globl breakinst\n\t" + ".set\tnoreorder\n\t" + "nop\n" + "breakinst:\tbreak\n\t" + "nop\n\t" + ".set\treorder"); +} + +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), (void *)0); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, NULL); + local_irq_disable(); +} + +static int compute_signal(int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; + + /* FP REGS */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + save_fp(current); + for (reg = 0; reg < 32; reg++) + *(ptr++) = current->thread.fpu.fpr[reg]; +} + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + const u32 *ptr = (u32 *)gdb_regs; +#else + const u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + regs->regs[reg] = *(ptr++); + + regs->cp0_status = *(ptr++); + regs->lo = *(ptr++); + regs->hi = *(ptr++); + regs->cp0_badvaddr = *(ptr++); + regs->cp0_cause = *(ptr++); + regs->cp0_epc = *(ptr++); + + /* FP REGS from current */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + for (reg = 0; reg < 32; reg++) + current->thread.fpu.fpr[reg] = *(ptr++); + restore_fp(current); +} + +/* + * Similar to regs_to_gdb_regs() except that process is sleeping and so + * we may not be able to get all the info. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + int reg; + struct thread_info *ti = task_thread_info(p); + unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32; + struct pt_regs *regs = (struct pt_regs *)ksp - 1; +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 16; reg++) + *(ptr++) = regs->regs[reg]; + + /* S0 - S7 */ + for (reg = 16; reg < 24; reg++) + *(ptr++) = regs->regs[reg]; + + for (reg = 24; reg < 28; reg++) + *(ptr++) = 0; + + /* GP, SP, FP, RA */ + for (reg = 28; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; +} + +/* + * Calls linux_debug_hook before the kernel dies. If KGDB is enabled, + * then try to fall into the debugger + */ +static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, + void *ptr) +{ + struct die_args *args = (struct die_args *)ptr; + struct pt_regs *regs = args->regs; + int trap = (regs->cp0_cause & 0x7c) >> 2; + + if (fixup_exception(regs)) + return NOTIFY_DONE; + + /* Userpace events, ignore. */ + if (user_mode(regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_active) != -1) + kgdb_nmicallback(smp_processor_id(), regs); + + if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_setting_breakpoint)) + if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst)) + regs->cp0_epc += 4; + + /* In SMP mode, __flush_cache_all does IPI */ + local_irq_enable(); + __flush_cache_all(); + + return NOTIFY_STOP; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_mips_notify, +}; + +/* + * Handle the 's' and 'c' commands + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *regs) +{ + char *ptr; + unsigned long address; + int cpu = smp_processor_id(); + + switch (remcom_in_buffer[0]) { + case 's': + case 'c': + /* handle the optional parameter */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &address)) + regs->cp0_epc = address; + + atomic_set(&kgdb_cpu_doing_single_step, -1); + if (remcom_in_buffer[0] == 's') + if (kgdb_contthread) + atomic_set(&kgdb_cpu_doing_single_step, cpu); + + return 0; + } + + return -1; +} + +struct kgdb_arch arch_kgdb_ops; + +/* + * We use kgdb_early_setup so that functions we need to call now don't + * cause trouble when called again later. + */ +int kgdb_arch_init(void) +{ + union mips_instruction insn = { + .r_format = { + .opcode = spec_op, + .func = break_op, + } + }; + memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE); + + register_die_notifier(&kgdb_notifier); + + return 0; +} + +/* + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_die_notifier(&kgdb_notifier); +} diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b8ea4e9d0d87ee8c169feafb93c8000231d3158b..426cced1e9dce3e4d6e560fad38d26136a8c02e9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs) printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", data ? "Data" : "Instruction", field, regs->cp0_epc, field, regs->regs[31]); + if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Oops", regs); force_sig(SIGBUS, current); } @@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { siginfo_t info; + if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0) + == NOTIFY_STOP) + return; die_if_kernel("FP exception in kernel code", regs); if (fcr31 & FPU_CSR_UNI_X) { @@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code, siginfo_t info; char b[40]; + if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP) + return; + /* * A short test says that IRIX 5.3 sends SIGTRAP for all trap * insns, even for trap and break codes that indicate arithmetic @@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs) unsigned int opcode = 0; int status = -1; + if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Reserved instruction in kernel code", regs); if (unlikely(compute_return_epc(regs) < 0)) @@ -1537,6 +1553,11 @@ void __init trap_init(void) extern char except_vec4; unsigned long i; +#if defined(CONFIG_KGDB) + if (kgdb_early_setup) + return; /* Already done */ +#endif + if (cpu_has_veic || cpu_has_vint) ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); else diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index a782549ac80eaa02069e40a18f6e0d98527be9b2..f0cf46adb978fcffb8d0827114408498f0acea74 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, old_pagemask = read_c0_pagemask(); w = read_c0_wired(); write_c0_wired(w + 1); - if (read_c0_wired() != w + 1) { - printk("[tlbwired] No WIRED reg?\n"); - return; - } write_c0_index(w << 8); write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index f8064446e812994617a2eede971ce109c6855673..3b7dd722c32a68ff83881d3200e769660678b899 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -13,7 +13,6 @@ obj-y := malta-amon.o malta-cmdline.o \ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o -obj-$(CONFIG_KGDB) += malta-kgdb.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index c0653021a17112e8d07a4048841211268e3aefdf..4832af2516680d4ac653ac31017f6a6960bab0d6 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -37,15 +37,6 @@ #include -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - int prom_argc; int *_prom_argv, *_prom_envp; @@ -173,51 +164,6 @@ static void __init console_config(void) } #endif -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - static void __init mips_nmi_setup(void) { void *base; diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c deleted file mode 100644 index 6a1854de45799e40d91efa03f8385eecdbdb617b..0000000000000000000000000000000000000000 --- a/arch/mips/mti-malta/malta-kgdb.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include -#include - -#include -#include - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index e7cad54936ca3ce9164219ae7043dbe16a9776ae..dc78b8983eeb2688b0fbae098561b53a9885c028 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -199,10 +199,6 @@ void __init plat_mem_setup(void) */ enable_dma(4); -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - #ifdef CONFIG_DMA_COHERENT if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) panic("Hardware DMA cache coherency not supported"); diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile index 31cc1a5cec3b165379d34b0514ea9ba8056c376b..dd9e7b1f7fd34f7e9d3bfb0d16bd91b0e8e02f8a 100644 --- a/arch/mips/nxp/pnx8550/common/Makefile +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -24,6 +24,5 @@ obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c deleted file mode 100644 index ad4624f6d9bc5a9c1647dc4ee63b8c5b48e33861..0000000000000000000000000000000000000000 --- a/arch/mips/nxp/pnx8550/common/gdb_hook.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * This is the interface to the remote debugger stub. - * - */ -#include -#include -#include -#include -#include - -#include -#include - -#include - -static struct serial_state rs_table[IP3106_NR_PORTS] = { -}; -static struct async_struct kdb_port_info = {0}; - -void rs_kgdb_hook(int tty_no) -{ - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = tty_no; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - - /* - * Now, initialize the UART - */ - ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; - ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud -} - -int putDebugChar(char c) -{ - /* Wait until FIFO not full */ - while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, kdb_port_info.port) = c; - - return 1; -} - -char getDebugChar(void) -{ - char ch; - - /* Wait until there is a char in the FIFO */ - while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RXFIFO) >> 8)) - ; - /* Read one char */ - ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RBRTHR; - /* Advance the RX FIFO read pointer */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; - return (ch); -} - -void rs_disable_debug_interrupts(void) -{ - ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ -} - -void rs_enable_debug_interrupts(void) -{ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ -} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index aad03429a5e3f65aab895ce7fd04473f94ebd3e0..f080f114a1bf6d343baba163b88958f9ee406cf3 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -34,7 +34,6 @@ #include #include -#include #include #include diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c index 18b125e3b65d4a222fa1a2f7ae210611687d5889..acf1fa88944456119619e57d2813041e3eb04b20 100644 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -22,7 +22,6 @@ #include #include -#include #include #include diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c index 92d764c977014da47ddaf72813dbd67344eef478..2aed50fef10ff8b800a58c8cdc0551d654b8fbf8 100644 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void); extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; -extern void rs_kgdb_hook(int tty_no); extern char *prom_getcmdline(void); struct resource standard_io_resources[] = { @@ -142,16 +141,5 @@ void __init plat_mem_setup(void) ip3106_baud(UART_BASE, pnx8550_console_port) = 5; } -#ifdef CONFIG_KGDB - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - int line; - argptr += strlen("kgdb=ttyS"); - line = *argptr == '0' ? 0 : 1; - rs_kgdb_hook(line); - pr_info("KGDB: Using ttyS%i for session, " - "please connect your debugger\n", line ? 1 : 0); - } -#endif return; } diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 8a17a39e5bf2ae265f86be48924f92d44b30c71c..31c15019659544a55f81f2675abf25f7a085640e 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -37,45 +37,48 @@ #include #include #include +#include #include +#include +#include #include -static inline int mkaddr(unsigned char bus, unsigned char dev_fn, - unsigned char where) +static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where) { - if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | - (where & 0xfc); + if (bus->parent == NULL && + devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) + return -1; + tx3927_pcicptr->ica = + ((bus->number & 0xff) << 0x10) | + ((devfn & 0xff) << 0x08) | + (where & 0xfc) | (bus->parent ? 1 : 0); /* clear M_ABORT and Disable M_ABORT Int. */ tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT; - - return PCIBIOS_SUCCESSFUL; + return 0; } static inline int check_abort(void) { - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) + if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) { tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; + /* flush write buffer */ + iob(); return PCIBIOS_DEVICE_NOT_FOUND; - + } return PCIBIOS_SUCCESSFUL; } static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } switch (size) { case 1: @@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { case 1: @@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, tx3927_pcicptr->icd = cpu_to_le32(val); } - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) - tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; - tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; - return PCIBIOS_DEVICE_NOT_FOUND; - return check_abort(); } @@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel, PCI_COMMAND_PARITY | PCI_COMMAND_SERR; local_irq_restore(flags); } + +static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n", + regs->cp0_epc); + printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", + tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL; + tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL; + tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL; + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + return IRQ_HANDLED; + } + console_verbose(); + panic("PCI error."); +} + +void __init tx3927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI, + tx3927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX3927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index c6b49bccd2742b01f32c908851092dd5bc1aa2da..5989e747527f2e4e67f591b93a1f4eb2f16652f3 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -16,6 +16,8 @@ * option) any later version. */ #include +#include +#include #include static struct { @@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr) __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16), &pcicptr->pcistatus); + /* flush write buffer */ + iob(); code = PCIBIOS_DEVICE_NOT_FOUND; } return code; @@ -192,6 +196,28 @@ static struct { .gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */ }; +char *__devinit tx4927_pcibios_setup(char *str) +{ + unsigned long val; + + if (!strncmp(str, "trdyto=", 7)) { + if (strict_strtoul(str + 7, 0, &val) == 0) + tx4927_pci_opts.trdyto = val; + return NULL; + } + if (!strncmp(str, "retryto=", 8)) { + if (strict_strtoul(str + 8, 0, &val) == 0) + tx4927_pci_opts.retryto = val; + return NULL; + } + if (!strncmp(str, "gbwc=", 5)) { + if (strict_strtoul(str + 5, 0, &val) == 0) + tx4927_pci_opts.gbwc = val; + return NULL; + } + return str; +} + void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, struct pci_controller *channel, int extarb) { @@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void) tx4927_report_pcic_status1(pcicptrs[i].pcicptr); } } + +static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr) +{ + int i; + __u32 __iomem *preg = (__u32 __iomem *)pcicptr; + + printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr); + for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) { + if (i % 32 == 0) { + printk(KERN_CONT "\n"); + printk(KERN_INFO "%04x:", i); + } + /* skip registers with side-effects */ + if (i == offsetof(struct tx4927_pcic_reg, g2pintack) + || i == offsetof(struct tx4927_pcic_reg, g2pspc) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) { + printk(KERN_CONT " XXXXXXXX"); + continue; + } + printk(KERN_CONT " %08x", __raw_readl(preg)); + } + printk(KERN_CONT "\n"); +} + +void tx4927_dump_pcic_settings(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].pcicptr) + tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr); + } +} + +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + struct tx4927_pcic_reg __iomem *pcicptr = + (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id; + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n", + (int)(2 * sizeof(unsigned long)), regs->cp0_epc); + tx4927_report_pcic_status1(pcicptr); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (TX4927_PCIC_PCISTATUS_ALL << 16), + &pcicptr->pcistatus); + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus); + __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus); + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus); + return IRQ_HANDLED; + } + console_verbose(); + tx4927_dump_pcic_settings1(pcicptr); + panic("PCI error."); +} + +#ifdef CONFIG_TOSHIBA_FPCIB0 +static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus); + + if (!pcicptr) + return; + if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) { + /* Reset Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg); + /* + * swap reqBP and reqXP (raise priority of SLC90E66). + * SLC90E66(PCI-ISA bridge) is connected to REQ2 on + * PCI Backplane board. + */ + __raw_writel(0x72543610, &pcicptr->pbareqport); + __raw_writel(0, &pcicptr->pbabm); + /* Use Fixed ParkMaster (required by SLC90E66) */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg); + /* Enable Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA | + TX4927_PCIC_PBACFG_PBAEN, + &pcicptr->pbacfg); + printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n", + __raw_readl(&pcicptr->pbareqport)); + } +} +#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, + tx4927_quirk_slc90e66_bridge); +#endif diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c index 27e86a09dd4167a8d511963e90742ad2b9ec39d0..aaa900596792db52eb6fdac89944e1bdd4c11146 100644 --- a/arch/mips/pci/pci-tx4927.c +++ b/arch/mips/pci/pci-tx4927.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void) pciclk = -1; return pciclk; } + +void __init tx4927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index e5375511c2b7d79d9d6b4c63399b279f5475b46d..60e2c52c2c5ecfd758d949f9fc0e6926e21393b5 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) } return -1; } + +void __init tx4938_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 77bd5b68dc430beab3dde6dbefde63b1eca557ca..c7fe6ec621e68524b0e4ef5d391e7e47d43e472a 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif -char *pcibios_setup(char *str) +char * (*pcibios_plat_setup)(char *str) __devinitdata; + +char *__devinit pcibios_setup(char *str) { + if (pcibios_plat_setup) + return pcibios_plat_setup(str); return str; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c index 9de34302e5f4004ef21ba4b8de6c4f1771fb47f3..f7261628d8a60ec209d346232dbeab94874acb18 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c @@ -38,68 +38,6 @@ #include #include -#ifdef CONFIG_KGDB -/* - * kgdb uses serial port 1 so the console can remain on port 0. - * To use port 0 change the definition to read as follows: - * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE) - */ -#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE) - -int putDebugChar(char c) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val = (uint32_t)c; - - local_irq_disable(); - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - uart[0] = val; - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - local_irq_enable(); - - return 1; -} - -char getDebugChar(void) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val; - - while( !(uart[5] & 0x01) ); /* Wait for RXRDY */ - val = uart[0]; - - return (char)val; -} - -void initDebugPort(unsigned int uartclk, unsigned int baudrate) -{ - unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate); - - /* Enable FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4, - (char *)DEBUG_PORT_BASE + (UART_FCR * 4)); - - /* Select brtc divisor */ - writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Store divisor lsb */ - writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4)); - - /* Store divisor msb */ - writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); - - /* Set 8N1 mode */ - writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Disable flow control */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4)); - - /* Disable receive interrupt(!) */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); -} -#endif - void __init msp_serial_setup(void) { char *s; @@ -139,17 +77,6 @@ void __init msp_serial_setup(void) case MACH_MSP7120_FPGA: /* Enable UART1 on MSP4200 and MSP7120 */ *GPIO_CFG2_REG = 0x00002299; - -#ifdef CONFIG_KGDB - /* Initialize UART1 for kgdb since PMON doesn't */ - if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) { - if( mips_machtype == MACH_MSP4200_FPGA - || mips_machtype == MACH_MSP7120_FPGA ) - initDebugPort(uartclk, 19200); - else - initDebugPort(uartclk, 57600); - } -#endif break; default: diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index 8fd9a04e353487bed0942e40fbc6cccf3fbc6c9b..b16f95c3df654a089a33b7b9655228863421e865 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -4,7 +4,6 @@ obj-y += irq.o prom.o py-console.o setup.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c deleted file mode 100644 index 6362c702e3890a6788878a7d70e6823f5fe17025..0000000000000000000000000000000000000000 --- a/arch/mips/pmc-sierra/yosemite/dbg_io.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2003 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Support for KGDB for the Yosemite board. We make use of single serial - * port to be used for KGDB as well as console. The second serial port - * seems to be having a problem. Single IRQ is allocated for both the - * ports. Hence, the interrupt routing code needs to figure out whether - * the interrupt came from channel A or B. - */ - -#include - -/* - * Baud rate, Parity, Data and Stop bit settings for the - * serial port on the Yosemite. Note that the Early printk - * patch has been added. So, we should be all set to go - */ -#define YOSEMITE_BAUD_2400 2400 -#define YOSEMITE_BAUD_4800 4800 -#define YOSEMITE_BAUD_9600 9600 -#define YOSEMITE_BAUD_19200 19200 -#define YOSEMITE_BAUD_38400 38400 -#define YOSEMITE_BAUD_57600 57600 -#define YOSEMITE_BAUD_115200 115200 - -#define YOSEMITE_PARITY_NONE 0 -#define YOSEMITE_PARITY_ODD 0x08 -#define YOSEMITE_PARITY_EVEN 0x18 -#define YOSEMITE_PARITY_MARK 0x28 -#define YOSEMITE_PARITY_SPACE 0x38 - -#define YOSEMITE_DATA_5BIT 0x0 -#define YOSEMITE_DATA_6BIT 0x1 -#define YOSEMITE_DATA_7BIT 0x2 -#define YOSEMITE_DATA_8BIT 0x3 - -#define YOSEMITE_STOP_1BIT 0x0 -#define YOSEMITE_STOP_2BIT 0x4 - -/* This is crucial */ -#define SERIAL_REG_OFS 0x1 - -#define SERIAL_RCV_BUFFER 0x0 -#define SERIAL_TRANS_HOLD 0x0 -#define SERIAL_SEND_BUFFER 0x0 -#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS) -#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS) -#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS) -#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS) -#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS) -#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS) -#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS) -#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS) -#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS) -#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS) - -#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS) -#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS) - -/* - * Functions to READ and WRITE to serial port 0 - */ -#define SERIAL_READ(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) - -#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) = val) - -/* - * Functions to READ and WRITE to serial port 1 - */ -#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) - -#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) = val) - -/* - * Second serial port initialization - */ -void init_second_port(void) -{ - /* Disable Interrupts */ - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80); - divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200; - SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE_1(SERIAL_DIVISOR_MSB, - (divisor & 0xff00) >> 8); - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT | - YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT); - - /* Enable Interrupts */ - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf); -} - -/* Initialize the serial port for KGDB debugging */ -void debugInit(unsigned int baud, unsigned char data, unsigned char parity, - unsigned char stop) -{ - /* Disable Interrupts */ - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80); - - divisor = TITAN_SERIAL_BASE_BAUD / baud; - SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8); - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -unsigned char getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0); - return SERIAL_READ(SERIAL_RCV_BUFFER); -} - -int putDebugChar(unsigned char byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0); - SERIAL_WRITE(SERIAL_SEND_BUFFER, byte); - - return 1; -} diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index 4decc28078673203a4355c9d7c64950a25c6d6c7..5f673eba142cf6a600e5c4159d84f72f0f6cf6b8 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void) } } -#ifdef CONFIG_KGDB -extern void init_second_port(void); -#endif - /* * Initialize the next level interrupt handler */ @@ -156,11 +152,6 @@ void __init arch_init_irq(void) rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); -#ifdef CONFIG_KGDB - /* At this point, initialize the second serial port */ - init_second_port(); -#endif - #ifdef CONFIG_GDB_CONSOLE register_gdb_console(); #endif diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index b2fe82dba0a561848e70aad5fee6a2a7bc834f1a..00a1c7877bf4c454e55ff41d507da678eb5f55b1 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = { void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) { - unsigned flags, data; + unsigned long flags; + unsigned data; unsigned i = 0; spin_lock_irqsave(&dev3.lock, flags); @@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg); void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) { - unsigned flags; + unsigned long flags; spin_lock_irqsave(&dev3.lock, flags); diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c index db74edf8cefb8cc96fca57386b93d9096ae3a58f..8e7a46855b50ad8fc5afe81e528d2e301c833a31 100644 --- a/arch/mips/rb532/time.c +++ b/arch/mips/rb532/time.c @@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void) void __init plat_time_init(void) { - unsigned int est_freq, flags; - unsigned long r4k_offset; + unsigned int est_freq; + unsigned long flags, r4k_offset; local_irq_save(flags); diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 5f389ee26fca034eb5c8f0cc6b961a15d9b3a6fe..896a1ef8482962e5376a37487693f5b87183f053 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -81,30 +80,6 @@ void __init plat_mem_setup(void) add_preferred_console("arc", 0, NULL); } -#ifdef CONFIG_KGDB - { - char *kgdb_ttyd = prom_getcmdline(); - - if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) { - int line; - kgdb_ttyd += strlen("kgdb=ttyd"); - if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2') - printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c" - ", falling back to /dev/ttyd1\n", *kgdb_ttyd); - line = *kgdb_ttyd == '2' ? 0 : 1; - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session\n", line ? 1 : 2); - rs_kgdb_hook(line); - - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session, please connect your debugger\n", line ? 1:2); - - kgdb_enabled = 1; - /* Breakpoints and stuff are in sgi_irq_setup() */ - } - } -#endif - #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE) { ULONG *gfxinfo; diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index e0a6871d56e4501f947c662d19ba2267bad07d20..31f4931b8484334d60cdd0ea6ccc0b3ea214b2de 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -7,7 +7,6 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \ ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o -obj-$(CONFIG_KGDB) += ip27-dbgio.o obj-$(CONFIG_SMP) += ip27-smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c deleted file mode 100644 index 08fd88b36f80e5a1247d21d6aded2ba2541e8000..0000000000000000000000000000000000000000 --- a/arch/mips/sgi-ip27/ip27-dbgio.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2004 Ralf Baechle - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#define IOC3_CLK (22000000 / 3) -#define IOC3_FLAGS (0) - -static inline struct ioc3_uartregs *console_uart(void) -{ - struct ioc3 *ioc3; - - ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base; - - return &ioc3->sregs.uarta; -} - -unsigned char getDebugChar(void) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_DR) == 0); - return uart->iu_rbr; -} - -void putDebugChar(unsigned char c) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_THRE) == 0); - uart->iu_thr = c; -} diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index db372a0f106d1e8631aff8c001ba2891448aebb7..a35818ed42639c8548537546d82eae9f35f23674 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ht_eoi_space; #endif -#ifdef CONFIG_KGDB -#include -extern void breakpoint(void); -static int kgdb_irq; -#ifdef CONFIG_GDB_CONSOLE -extern void register_gdb_console(void); -#endif - -/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */ -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip bcm1480_irq_type = { .name = "BCM1480-IMR", .ack = ack_bcm1480_irq, @@ -355,61 +331,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - /* QQQ FIXME */ - __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + - (kgdb_irq << 3))); - bcm1480_unmask_irq(0, kgdb_irq); - -#ifdef CONFIG_GDB_CONSOLE - register_gdb_console(); -#endif - printk("Waiting for GDB on UART port %d\n", kgdb_port); - set_debug_traps(); - breakpoint(); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void bcm1480_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat.irqs[smp_processor_id()][kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void bcm1480_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void) bcm1480_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) - bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */ -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index fd9604d5555ac64d731e6ce2c56da1b171af07f0..3de30f79db3f33dcbf945bca58389456af40e1f3 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -59,10 +59,6 @@ int cfe_cons_handle; extern unsigned long initrd_start, initrd_end; #endif -#ifdef CONFIG_KGDB -extern int kgdb_port; -#endif - static void __noreturn cfe_linux_exit(void *arg) { int warm = *(int *)arg; @@ -246,9 +242,6 @@ void __init prom_init(void) int argc = fw_arg0; char **envp = (char **) fw_arg2; int *prom_vec = (int *) fw_arg3; -#ifdef CONFIG_KGDB - char *arg; -#endif _machine_restart = cfe_linux_restart; _machine_halt = cfe_linux_halt; @@ -309,13 +302,6 @@ void __init prom_init(void) } } -#ifdef CONFIG_KGDB - if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL) - kgdb_port = (arg[10] == '0') ? 0 : 1; - else - kgdb_port = 1; -#endif - #ifdef CONFIG_BLK_DEV_INITRD { char *ptr; diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index eac9065ffe0ccc4c5f0811f8ee20d45375abd21f..a5158483986e878dd7d935a439d6c2b0c1f98d2e 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ldt_eoi_space; #endif -#ifdef CONFIG_KGDB -static int kgdb_irq; - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip sb1250_irq_type = { .name = "SB1250-IMR", .ack = ack_sb1250_irq, @@ -313,55 +303,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - __raw_writeq(M_DUART_IMR_BRK, - IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, - R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq << 3))); - sb1250_unmask_irq(0, kgdb_irq); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void sb1250_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat_this_cpu.irqs[kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void sb1250_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void) sb1250_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ - sb1250_kgdb_interrupt(); -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); else diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 255d692bfa188c6df2d59d9a167644396d4d1b15..f18ba9201bbcd7eda4a1336c545694f84841abcd 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,4 +1,3 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c deleted file mode 100644 index b97ae30484826af212162302037af128509de313..0000000000000000000000000000000000000000 --- a/arch/mips/sibyte/swarm/dbg_io.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * kgdb debug routines for SiByte boards. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* -------------------- BEGINNING OF CONFIG --------------------- */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * We use the second serial port for kgdb traffic. - * 115200, 8, N, 1. - */ - -#define BAUD_RATE 115200 -#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE) -#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */ -#define PARITY V_DUART_PARITY_MODE_NONE /* or even */ -#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */ - -static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */ - -/* -------------------- END OF CONFIG --------------------- */ -extern int kgdb_port; - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -void putDebugChar(unsigned char c); -unsigned char getDebugChar(void); -static void -duart_init(int clk_divisor, int data, int parity, int stop) -{ - duart_out(R_DUART_MODE_REG_1, data | parity); - duart_out(R_DUART_MODE_REG_2, stop); - duart_out(R_DUART_CLK_SEL, clk_divisor); - - duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */ -} - -void -putDebugChar(unsigned char c) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0); - duart_out(R_DUART_TX_HOLD, c); -} - -unsigned char -getDebugChar(void) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ; - return duart_in(R_DUART_RX_HOLD); -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 6de4c5aa92bea002115b07c58351c4776efbf7fb..840fe757c48d836faa36b77b1c94e32585552b70 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,3 +1,27 @@ +config MACH_TX39XX + bool + select MACH_TXX9 + select SYS_HAS_CPU_TX39XX + +config MACH_TX49XX + bool + select MACH_TXX9 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_64BIT_KERNEL + +config MACH_TXX9 + bool + select DMA_NONCOHERENT + select SWAP_IO_SPACE + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" depends on MACH_TX39XX @@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938 config SOC_TX3927 bool select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4927 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4938 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 select I8259 config PICMG_PCI_BACKPLANE_DEFAULT bool "Support for PICMG PCI Backplane" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9c120771e65f7bf7f64de83801f5ffd07c468b88..9bb34af26b733260bb2810d403dd3acb3c601798 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -4,9 +4,9 @@ obj-y += setup.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += dbgio.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c deleted file mode 100644 index 33b9c672a322a8d055b58cd7d6e0eba2c0d1aa9c..0000000000000000000000000000000000000000 --- a/arch/mips/txx9/generic/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU - */ - -#include - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c new file mode 100644 index 0000000000000000000000000000000000000000..c683f593eda2166b31e2d33cf19725dcaf6d2076 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx3927.c @@ -0,0 +1,25 @@ +/* + * Common tx3927 irq handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#include +#include +#include + +void __init tx3927_irq_init(void) +{ + int i; + + txx9_irq_init(TX3927_IRC_REG); + /* raise priority for timers, sio */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_irq_set_pri(TX3927_IR_TMR(i), 6); + for (i = 0; i < TX3927_NR_SIO; i++) + txx9_irq_set_pri(TX3927_IR_SIO(i), 7); +} diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 0b92d8c13208a085309538f5b97cf228baddc3c6..7b637a7c0e6694d7bbae5c3ec895093fb2f6491e 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return txx9_board_vec->pci_map_irq(dev, slot, pin); } + +char * (*txx9_board_pcibios_setup)(char *str) __devinitdata; + +char *__devinit txx9_pcibios_setup(char *str) +{ + if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) + return NULL; + if (!strcmp(str, "picmg")) { + /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX + (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ + txx9_pci_option |= TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strcmp(str, "nopicmg")) { + /* non-PICMG compliant backplane (TOSHIBA + RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ + txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strncmp(str, "clk=", 4)) { + char *val = str + 4; + txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; + if (strcmp(val, "33") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_33; + else if (strcmp(val, "66") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_66; + else /* "auto" */ + txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; + return NULL; + } else if (!strncmp(str, "err=", 4)) { + if (!strcmp(str + 4, "panic")) + txx9_pci_err_action = TXX9_PCI_ERR_PANIC; + else if (!strcmp(str + 4, "ignore")) + txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; + return NULL; + } + return str; +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 8c60c78b9a9e0506d2eb3307e6bbda8e1dbef710..1bc57d0f4c5c156c9aafb6ce3d0d39f657943b65 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -20,9 +20,13 @@ #include #include #include +#include +#include #include #include +#include #include +#include #ifdef CONFIG_CPU_TX49XX #include #endif @@ -187,6 +191,117 @@ char * __init prom_getcmdline(void) return &(arcs_cmdline[0]); } +static void __noreturn txx9_machine_halt(void) +{ + local_irq_disable(); + clear_c0_status(ST0_IM); + while (1) { + if (cpu_wait) { + (*cpu_wait)(); + if (cpu_has_counter) { + /* + * Clear counter interrupt while it + * breaks WAIT instruction even if + * masked. + */ + write_c0_compare(0); + } + } + } +} + +/* Watchdog support */ +void __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + platform_device_register_simple("txx9wdt", -1, &res, 1); +} + +/* SPI support */ +void __init txx9_spi_init(int busid, unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("spi_txx9", busid, + res, ARRAY_SIZE(res)); +} + +void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr) +{ + struct platform_device *pdev = + platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, ethaddr, 6) || + platform_device_add(pdev)) + platform_device_put(pdev); +} + +void __init txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts) +{ +#ifdef CONFIG_SERIAL_TXX9 + struct uart_port req; + + memset(&req, 0, sizeof(req)); + req.line = line; + req.iotype = UPIO_MEM; + req.membase = ioremap(baseaddr, 0x24); + req.mapbase = baseaddr; + req.irq = irq; + if (!nocts) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + if (sclk) { + req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/; + req.uartclk = sclk; + } else + req.uartclk = TXX9_IMCLK; + early_serial_txx9_setup(&req); +#endif /* CONFIG_SERIAL_TXX9 */ +} + +#ifdef CONFIG_EARLY_PRINTK +static void __init null_prom_putchar(char c) +{ +} +void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar; + +void __init prom_putchar(char c) +{ + txx9_prom_putchar(c); +} + +static void __iomem *early_txx9_sio_port; + +static void __init early_txx9_sio_putchar(char c) +{ +#define TXX9_SICISR 0x0c +#define TXX9_SITFIFO 0x1c +#define TXX9_SICISR_TXALS 0x00000002 + while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) & + TXX9_SICISR_TXALS)) + ; + __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO); +} + +void __init txx9_sio_putchar_init(unsigned long baseaddr) +{ + early_txx9_sio_port = ioremap(baseaddr, 0x24); + txx9_prom_putchar = early_txx9_sio_putchar; +} +#endif /* CONFIG_EARLY_PRINTK */ + /* wrappers */ void __init plat_mem_setup(void) { @@ -194,6 +309,15 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; /* no limit */ iomem_resource.start = 0; iomem_resource.end = ~0UL; /* no limit */ + + /* fallback restart/halt routines */ + _machine_restart = (void (*)(char *))txx9_machine_halt; + _machine_halt = txx9_machine_halt; + pm_power_off = txx9_machine_halt; + +#ifdef CONFIG_PCI + pcibios_plat_setup = txx9_pcibios_setup; +#endif txx9_board_vec->mem_setup(); } diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c new file mode 100644 index 0000000000000000000000000000000000000000..7bd963d37fc3a6a9c3471d6847c7ce2fdf72ae75 --- /dev/null +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -0,0 +1,130 @@ +/* + * TX3927 setup routines + * Based on linux/arch/mips/txx9/jmr3927/setup.c + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void __init tx3927_wdt_init(void) +{ + txx9_wdt_init(TX3927_TMR_REG(2)); +} + +void __init tx3927_setup(void) +{ + int i; + unsigned int conf; + + /* don't enable - see errata */ + txx9_ccfg_toeon = 0; + if (strstr(prom_getcmdline(), "toeon") != NULL) + txx9_ccfg_toeon = 1; + + txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, + TX3927_REG_SIZE); + + /* SDRAMC,ROMC are configured by PROM */ + for (i = 0; i < 8; i++) { + if (!(tx3927_romcptr->cr[i] & 0x8)) + continue; /* disabled */ + txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); + } + + /* clocks */ + txx9_gbus_clock = txx9_cpu_clock / 2; + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + /* enable Timeout BusError */ + if (txx9_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + if (read_c0_conf() & TX39_CONF_WBON) + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + else + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + + printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + + /* PIO */ + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk(KERN_INFO "TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk(KERN_INFO "TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); + else + printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); +} + +void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) +{ + txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr), + TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr), + TXX9_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK); +} + +void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask) +{ + int i; + + for (i = 0; i < 2; i++) + txx9_sio_init(TX3927_SIO_REG(i), + TXX9_IRQ_BASE + TX3927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); +} diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 89d6e28add93cf7e5e1cf95673cb07280801c4da..f80d4b7a694d3791e09889d340da96f3cb3caa72 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -21,7 +20,7 @@ #include #include -void __init tx4927_wdr_init(void) +static void __init tx4927_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4927_ccfg_set(TX4927_CCFG_WDRST); @@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void) tx4927_ccfg_set(TX4927_CCFG_WR); } +void __init tx4927_wdt_init(void) +{ + txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) @@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4927_setup_serial(void) +void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; - - for (i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i); - req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); - } -#endif /* CONFIG_SERIAL_TXX9 */ + + for (i = 0; i < 2; i++) + txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 317378d8579d39f19bf665440e1e7b36f71a6d61..f3040b9ba0593df8596cb46c17264b336a2df42c 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -21,7 +20,7 @@ #include #include -void __init tx4938_wdr_init(void) +static void __init tx4938_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4938_ccfg_set(TX4938_CCFG_WDRST); @@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void) tx4938_ccfg_set(TX4938_CCFG_WR); } +void __init tx4938_wdt_init(void) +{ + txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; @@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4938_setup_serial(void) +void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; unsigned int ch_mask = 0; if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL) @@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void) for (i = 0; i < 2; i++) { if ((1 << i) & ch_mask) continue; - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i); - req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); + txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } -#endif /* CONFIG_SERIAL_TXX9 */ +} + +void __init tx4938_spi_init(int busid) +{ + txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SPI); +} + +void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ + u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg); + + if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0); + if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1); } diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index 69e487467fa5e2ceaaf13149cf5f3ee28ac96c6f..a2b2d62d88e3270e281e5969d5c4ef968aeec8e2 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -15,8 +15,6 @@ #include #include -#define DEBUG - /* Common Registers */ #define SMSC_FDC37M81X_CONFIG_INDEX 0x00 #define SMSC_FDC37M81X_CONFIG_DATA 0x01 @@ -55,7 +53,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -static unsigned long g_smsc_fdc37m81x_base = 0; +static unsigned long g_smsc_fdc37m81x_base; static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) { @@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) u8 chip_id; if (g_smsc_fdc37m81x_base) - printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n", + __func__, field, g_smsc_fdc37m81x_base); g_smsc_fdc37m81x_base = port; @@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } @@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) } #ifdef DEBUG -void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg) { - printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n", + key, dev, reg, smsc_fdc37m81x_rd(reg)); } void smsc_fdc37m81x_config_dump(void) { u8 orig; - char *fname = "smsc_fdc37m81x_config_dump()"; + const char *fname = __func__; smsc_fdc37m81x_config_beg(); orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); - printk("%s: common\n", fname); + printk(KERN_INFO "%s: common\n", fname); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_DNUM); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, @@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void) smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_PMGT); - printk("%s: keyboard\n", fname); + printk(KERN_INFO "%s: keyboard\n", fname); smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, SMSC_FDC37M81X_ACTIVE); diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index ba292c9456691be2bfa1f8d5366a9f369f1a7bd7..20d61ac543e59b102591e86bae9432cfdb252498 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -3,6 +3,5 @@ # obj-y += prom.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 070c9a115e57a559ba023015015ae40ba67ab9ea..6ec626c9473fd4014a5c31919347d51aed407810 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -30,15 +30,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include #include #include #include #include -#include - -#include #include #include @@ -46,13 +42,6 @@ #error JMR3927_IRQ_END > NR_IRQS #endif -static unsigned char irc_level[TX3927_NUM_IR] = { - 5, 5, 5, 5, 5, 5, /* INT[5:0] */ - 7, 7, /* SIO */ - 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ - 6, 6, 6 /* TMR */ -}; - /* * CP0_STATUS is a thread's resource (saved/restored on context switch). * So disable_irq/enable_irq MUST handle IOC/IRC registers. @@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending) return irq; } -#ifdef CONFIG_PCI -static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); - printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", - tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); - - return IRQ_HANDLED; -} -static struct irqaction pcierr_action = { - .handler = jmr3927_pcierr_interrupt, - .mask = CPU_MASK_NONE, - .name = "PCI error", +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, }; -#endif - -static void __init jmr3927_irq_init(void); void __init jmr3927_irq_setup(void) { + int i; + txx9_irq_dispatch = jmr3927_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ @@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void) /* clear PCI Reset interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - jmr3927_irq_init(); + tx3927_irq_init(); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); /* setup IOC interrupt 1 (PCI, MODEM) */ set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); - -#ifdef CONFIG_PCI - setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); -#endif - - /* enable all CPU interrupt bits. */ - set_c0_status(ST0_IM); /* IE bit is still 0. */ -} - -static struct irq_chip jmr3927_irq_ioc = { - .name = "jmr3927_ioc", - .ack = mask_irq_ioc, - .mask = mask_irq_ioc, - .mask_ack = mask_irq_ioc, - .unmask = unmask_irq_ioc, -}; - -static void __init jmr3927_irq_init(void) -{ - u32 i; - - txx9_irq_init(TX3927_IRC_REG); - for (i = 0; i < TXx9_MAX_IR; i++) - txx9_irq_set_pri(i, irc_level[i]); - for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); } diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c deleted file mode 100644 index 5bd757e56f7923a1ea80443211828bd069392ae5..0000000000000000000000000000000000000000 --- a/arch/mips/txx9/jmr3927/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 2cadb423faceffc251edaabcc87219787edb5e75..70c4c8ec3e84b36d57b241f68a19c9a38bc05303 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -36,41 +36,18 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include +#include #include #include #include -#define TIMEOUT 0xffffff - -void -prom_putchar(char c) -{ - int i = 0; - - do { - i++; - if (i>TIMEOUT) - break; - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = c; - return; -} - -void -puts(const char *cp) -{ - while (*cp) - prom_putchar(*cp++); - prom_putchar('\r'); - prom_putchar('\n'); -} - void __init jmr3927_prom_init(void) { /* CCFG */ if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); + printk(KERN_ERR "TX3927 TLB off\n"); prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); + txx9_sio_putchar_init(TX3927_SIO_REG(1)); } diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 03647ebe41300a492bb73e1893cb2847b1e34081..87db41be8a565b9f3b0fc53632162cb534fed6c3 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -32,27 +32,18 @@ #include #include #include -#include #include #include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif -#include -#include #include +#include #include #include #include #include -extern void puts(const char *cp); - -/* don't enable - see errata */ -static int jmr3927_ccfg_toeon; - -static inline void do_reset(void) +static void jmr3927_machine_restart(char *command) { + local_irq_disable(); #if 1 /* Resetting PCI bus */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); @@ -61,33 +52,13 @@ static inline void do_reset(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); #endif jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); -} - -static void jmr3927_machine_restart(char *command) -{ - local_irq_disable(); - puts("Rebooting..."); - do_reset(); -} - -static void jmr3927_machine_halt(void) -{ - puts("JMR-TX3927 halted.\n"); - while (1); -} - -static void jmr3927_machine_power_off(void) -{ - puts("JMR-TX3927 halted. Please turn off the power.\n"); - while (1); + /* fallback */ + (*_machine_halt)(); } static void __init jmr3927_time_init(void) { - txx9_clockevent_init(TX3927_TMR_REG(0), - TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), - JMR3927_IMCLK); - txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); + tx3927_time_init(0, 1); } #define DO_WRITE_THROUGH @@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void) set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); _machine_restart = jmr3927_machine_restart; - _machine_halt = jmr3927_machine_halt; - pm_power_off = jmr3927_machine_power_off; - - /* Reboot on panic */ - panic_timeout = 180; /* cache setup */ { @@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void) #endif conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | + TX39_CONF_WBON | TX39_CONF_CWFON); conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; conf |= mips_config_wbon ? TX39_CONF_WBON : 0; @@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void) /* initialize board */ jmr3927_board_init(); - argptr = prom_getcmdline(); - - if ((argptr = strstr(argptr, "toeon")) != NULL) - jmr3927_ccfg_toeon = 1; - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "ip=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " ip=bootp"); - } - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = i == 0 ? - JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; - if (i == 0) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = JMR3927_IMCLK; - early_serial_txx9_setup(&req); - } - } + tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */ #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) strcat(argptr, " console=ttyS1,115200"); - } -#endif #endif } -static void tx3927_setup(void); - static void __init jmr3927_pci_setup(void) { #ifdef CONFIG_PCI @@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); } tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); + tx3927_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } static void __init jmr3927_board_init(void) { - tx3927_setup(); - jmr3927_pci_setup(); - - /* SIO0 DTR on */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); - - jmr3927_led_set(0); - - printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", - jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, - jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_dipsw1(), jmr3927_dipsw2(), - jmr3927_dipsw3(), jmr3927_dipsw4()); -} - -static void __init tx3927_setup(void) -{ - int i; - txx9_cpu_clock = JMR3927_CORECLK; - txx9_gbus_clock = JMR3927_GBUSCLK; /* SDRAMC are configured by PROM */ /* ROMC */ @@ -233,74 +148,32 @@ static void __init tx3927_setup(void) tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; - /* CCFG */ - /* enable Timeout BusError */ - if (jmr3927_ccfg_toeon) - tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; - - /* clear BusErrorOnWrite flag */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; - /* Disable PCI snoop */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; - /* do reset on watchdog */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; - -#ifdef DO_WRITE_THROUGH - /* Enable PCI SNOOP - with write through only */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; -#endif - /* Pin selection */ tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; tx3927_ccfgptr->pcfg |= TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); - printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", - tx3927_ccfgptr->crir, - tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - - /* TMR */ - for (i = 0; i < TX3927_NR_TMR; i++) - txx9_tmr_init(TX3927_TMR_REG(i)); - - /* DMA */ - tx3927_dmaptr->mcr = 0; - for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { - /* reset channel */ - tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; - tx3927_dmaptr->ch[i].ccr = 0; - } - /* enable DMA */ -#ifdef __BIG_ENDIAN - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; -#else - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; -#endif + tx3927_setup(); - /* PIO */ /* PIO[15:12] connected to LEDs */ __raw_writel(0x0000f000, &tx3927_pioptr->dir); - __raw_writel(0, &tx3927_pioptr->maskcpu); - __raw_writel(0, &tx3927_pioptr->maskext); - txx9_gpio_init(TX3927_PIO_REG, 0, 16); gpio_request(11, "dipsw1"); gpio_request(10, "dipsw2"); - { - unsigned int conf; - conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk("TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk("TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk("TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk("TX3927 D-Cache WriteBack.\n"); - else - printk("TX3927 D-Cache WriteBack (CWF) .\n"); - } + jmr3927_pci_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk(KERN_INFO + "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); } /* This trick makes rtc-ds1742 driver usable as is. */ @@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port) #endif } -static int __init jmr3927_rtc_init(void) +static void __init jmr3927_rtc_init(void) { static struct resource __initdata res = { .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev; - dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init jmr3927_wdt_init(void) -{ - return txx9_wdt_init(TX3927_TMR_REG(2)); + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } static void __init jmr3927_device_init(void) { __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); - jmr3927_wdt_init(); + tx3927_wdt_init(); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index cd748a930328ecc122b0eb4b4c8858b5f8e2ffe8..00cd5231da30c33524cf5ae02d7ad49d36e58851 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -27,85 +27,86 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* -IRQ Device -00 RBTX4927-ISA/00 -01 RBTX4927-ISA/01 PS2/Keyboard -02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) -03 RBTX4927-ISA/03 -04 RBTX4927-ISA/04 -05 RBTX4927-ISA/05 -06 RBTX4927-ISA/06 -07 RBTX4927-ISA/07 -08 RBTX4927-ISA/08 -09 RBTX4927-ISA/09 -10 RBTX4927-ISA/10 -11 RBTX4927-ISA/11 -12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) -13 RBTX4927-ISA/13 -14 RBTX4927-ISA/14 IDE -15 RBTX4927-ISA/15 - -16 TX4927-CP0/00 Software 0 -17 TX4927-CP0/01 Software 1 -18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use -23 TX4927-CP0/07 CPU TIMER - -24 TX4927-PIC/00 -25 TX4927-PIC/01 -26 TX4927-PIC/02 -27 TX4927-PIC/03 Cascade RBTX4927-IOC -28 TX4927-PIC/04 -29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet -30 TX4927-PIC/06 -31 TX4927-PIC/07 -32 TX4927-PIC/08 TX4927 SerialIO Channel 0 -33 TX4927-PIC/09 TX4927 SerialIO Channel 1 -34 TX4927-PIC/10 -35 TX4927-PIC/11 -36 TX4927-PIC/12 -37 TX4927-PIC/13 -38 TX4927-PIC/14 -39 TX4927-PIC/15 -40 TX4927-PIC/16 TX4927 PCI PCI-C -41 TX4927-PIC/17 -42 TX4927-PIC/18 -43 TX4927-PIC/19 -44 TX4927-PIC/20 -45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR -47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) -48 TX4927-PIC/24 -49 TX4927-PIC/25 -50 TX4927-PIC/26 -51 TX4927-PIC/27 -52 TX4927-PIC/28 -53 TX4927-PIC/29 -54 TX4927-PIC/30 -55 TX4927-PIC/31 - -56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] -57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] -58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] -59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] -60 RBTX4927-IOC/04 -61 RBTX4927-IOC/05 -62 RBTX4927-IOC/06 -63 RBTX4927-IOC/07 - -NOTES: -SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 -SouthBridge/ISA/pin=0 no pci irq used by this device -SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 -SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 -SouthBridge/PMC/pin=0 no pci irq used by this device -SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 -SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) -JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 -*/ + * I8259A_IRQ_BASE+00 + * I8259A_IRQ_BASE+01 PS2/Keyboard + * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15) + * I8259A_IRQ_BASE+03 + * I8259A_IRQ_BASE+04 + * I8259A_IRQ_BASE+05 + * I8259A_IRQ_BASE+06 + * I8259A_IRQ_BASE+07 + * I8259A_IRQ_BASE+08 + * I8259A_IRQ_BASE+09 + * I8259A_IRQ_BASE+10 + * I8259A_IRQ_BASE+11 + * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time) + * I8259A_IRQ_BASE+13 + * I8259A_IRQ_BASE+14 IDE + * I8259A_IRQ_BASE+15 + * + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 + * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet + * TXX9_IRQ_BASE+06 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0 + * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1 + * TXX9_IRQ_BASE+10 + * TXX9_IRQ_BASE+11 + * TXX9_IRQ_BASE+12 + * TXX9_IRQ_BASE+13 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C + * TXX9_IRQ_BASE+17 + * TXX9_IRQ_BASE+18 + * TXX9_IRQ_BASE+19 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR + * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used) + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 + * + * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge) + * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge) + * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR) + * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4) + * RBTX4927_IRQ_IOC+04 + * RBTX4927_IRQ_IOC+05 + * RBTX4927_IRQ_IOC+06 + * RBTX4927_IRQ_IOC+07 + * + * NOTES: + * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 + * SouthBridge/ISA/pin=0 no pci irq used by this device + * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR + * via ISA IRQ14 + * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 + * SouthBridge/PMC/pin=0 no pci irq used by this device + * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 + * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) + * JP7 is not bus master -- do NOT use -- only 4 pci bus master's + * allowed -- SouthBridge, JP4, JP5, JP6 + */ #include #include @@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq) level3 = readb(rbtx4927_imstat_addr) & 0x1f; if (level3) sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; - return (sw_irq); + return sw_irq; } static void __init toshiba_rbtx4927_irq_ioc_init(void) diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 5c0de54ebdd2c6ee8aa9f978284374da686a2225..1dc0a5b1956b2ec425e790adfe4f10d58b4e3bd9 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void) { prom_init_cmdline(); add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 3da20ea3e55ceb36259580408115ee05d763bf0e..0d39bafea794278968384700b19f7125bd8785cf 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -46,12 +46,9 @@ #include #include #include -#include -#include #include #include #include -#include #include #include #include @@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void) tx4927_report_pciclk(); tx4927_pcic_setup(tx4927_pcicptr, c, extarb); } + tx4927_setup_pcierr_irq(); } static void __init tx4937_pci_setup(void) @@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void) tx4938_report_pciclk(); tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } + tx4938_setup_pcierr_irq(); } static void __init rbtx4927_arch_init(void) @@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void) #define rbtx4937_arch_init NULL #endif /* CONFIG_PCI */ -static void __noreturn wait_forever(void) -{ - while (1) - if (cpu_wait) - (*cpu_wait)(); -} - static void toshiba_rbtx4927_restart(char *command) { - printk(KERN_NOTICE "System Rebooting...\n"); - /* enable the s/w reset register */ writeb(1, rbtx4927_softresetlock_addr); @@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command) /* do a s/w reset */ writeb(1, rbtx4927_softreset_addr); - /* do something passive while waiting for reset */ - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_power_off(void) -{ - toshiba_rbtx4927_halt(); - /* no return */ + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4927_clock_init(void); @@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void) u32 cp0_config; char *argptr; - /* f/w leaves this on at startup */ - clear_c0_status(ST0_ERL); - /* enable caches -- HCP5 does this, pmon does not */ cp0_config = read_c0_config(); cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); @@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void) } _machine_restart = toshiba_rbtx4927_restart; - _machine_halt = toshiba_rbtx4927_halt; - pm_power_off = toshiba_rbtx4927_power_off; #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif - tx4927_setup_serial(); + tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif - -#ifdef CONFIG_ROOT_NFS - argptr = prom_getcmdline(); - if (strstr(argptr, "root=") == NULL) { - strcat(argptr, " root=/dev/nfs rw"); - } -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif } @@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void) tx4927_time_init(0); } -static int __init toshiba_rbtx4927_rtc_init(void) +static void __init toshiba_rbtx4927_rtc_init(void) { struct resource res = { .start = RBTX4927_BRAMRTC_BASE - IO_BASE, .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev = - platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } -static int __init rbtx4927_ne_init(void) +static void __init rbtx4927_ne_init(void) { struct resource res[] = { { @@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4927_wdt_init(void) -{ - return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); rbtx4927_ne_init(); - rbtx4927_wdt_init(); + tx4927_wdt_init(); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index 3971a061657a6239f0cfb131fd635b5ebcefe518..ca2f8306ce93b1e95fde8594793507c4bdc356df 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -11,59 +11,57 @@ */ /* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC + * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 TX4938 ETH1 + * TXX9_IRQ_BASE+06 TX4938 ETH0 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4938 SIO 0 + * TXX9_IRQ_BASE+09 TX4938 SIO 1 + * TXX9_IRQ_BASE+10 TX4938 DMA0 + * TXX9_IRQ_BASE+11 TX4938 DMA1 + * TXX9_IRQ_BASE+12 TX4938 DMA2 + * TXX9_IRQ_BASE+13 TX4938 DMA3 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4938 PCIC + * TXX9_IRQ_BASE+17 TX4938 TMR0 + * TXX9_IRQ_BASE+18 TX4938 TMR1 + * TXX9_IRQ_BASE+19 TX4938 TMR2 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4938 PCIERR + * TXX9_IRQ_BASE+23 + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 TX4938 SPI + * + * RBTX4938_IRQ_IOC+00 PCI-D + * RBTX4938_IRQ_IOC+01 PCI-C + * RBTX4938_IRQ_IOC+02 PCI-B + * RBTX4938_IRQ_IOC+03 PCI-A + * RBTX4938_IRQ_IOC+04 RTC + * RBTX4938_IRQ_IOC+05 ATA + * RBTX4938_IRQ_IOC+06 MODEM + * RBTX4938_IRQ_IOC+07 SWINT + */ #include #include #include @@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq) return sw_irq; } -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ static void __init toshiba_rbtx4938_irq_ioc_init(void) { diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index ee189519ce5a6bf92ebaea66650fbd64d0afc5df..d73123cd2ab9441a68fcc65e31251a214ab16b54 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void) prom_init_cmdline(); #endif add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 6c2b99bb8af630e1d9c1b176ebd5b927689b11da..9ab48dec0fe840f12f9fccdf9e2cc0a631da90bc 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -13,9 +13,6 @@ #include #include #include -#include -#include -#include #include #include @@ -28,33 +25,14 @@ #include #include -static void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -static void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - static void rbtx4938_machine_restart(char *command) { local_irq_disable(); - - printk("Rebooting..."); writeb(1, rbtx4938_softresetlock_addr); writeb(1, rbtx4938_sfvol_addr); writeb(1, rbtx4938_softreset_addr); - while(1) - ; + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4938_pci_setup(void) @@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void) register_pci_controller(c); tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); } + tx4938_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } @@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void) if (sum) printk(KERN_WARNING "seeprom: bad checksum.\n"); } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } + tx4938_ethaddr_init(&dat[4], &dat[4 + 6]); #endif /* CONFIG_PCI */ return 0; } @@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void) #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(RBTX4938_ETHER_BASE); #endif - tx4938_setup_serial(); + tx4938_sio_init(7372800, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); + printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); + printk(KERN_INFO "PIOSEL: enabling nand selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); + printk(KERN_INFO "PIOSEL: enabling ata selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ @@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void) rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); + printk(KERN_ERR "request resource for fpga failed\n"); _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; writeb(0xff, rbtx4938_led_addr); printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", @@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void) readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); } -static int __init rbtx4938_ne_init(void) +static void __init rbtx4938_ne_init(void) { struct resource res[] = { { @@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); @@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = { .ngpio = 3, }; -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - static int __init rbtx4938_spi_init(void) { struct spi_board_info srtc_info = { @@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + tx4938_spi_init(0); return 0; } @@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void) rbtx4938_spi_init(); } -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} - static void __init rbtx4938_device_init(void) { rbtx4938_ethaddr_init(); rbtx4938_ne_init(); - rbtx4938_wdt_init(); + tx4938_wdt_init(); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h deleted file mode 100644 index 22f67d4a71abac6831f5d7facdb877e9b4b45051..0000000000000000000000000000000000000000 --- a/include/asm-mips/gdb-stub.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 Andreas Busse - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - - -/* - * important register numbers - */ - -#define REG_EPC 37 -#define REG_FP 72 -#define REG_SP 29 - -/* - * Stack layout for the GDB exception handler - * Derived from the stack layout described in asm-mips/stackframe.h - * - * The first PTRSIZE*6 bytes are argument save space for C subroutines. - */ -#define NUMREGS 90 - -#define GDB_FR_REG0 (PTRSIZE*6) /* 0 */ -#define GDB_FR_REG1 ((GDB_FR_REG0) + LONGSIZE) /* 1 */ -#define GDB_FR_REG2 ((GDB_FR_REG1) + LONGSIZE) /* 2 */ -#define GDB_FR_REG3 ((GDB_FR_REG2) + LONGSIZE) /* 3 */ -#define GDB_FR_REG4 ((GDB_FR_REG3) + LONGSIZE) /* 4 */ -#define GDB_FR_REG5 ((GDB_FR_REG4) + LONGSIZE) /* 5 */ -#define GDB_FR_REG6 ((GDB_FR_REG5) + LONGSIZE) /* 6 */ -#define GDB_FR_REG7 ((GDB_FR_REG6) + LONGSIZE) /* 7 */ -#define GDB_FR_REG8 ((GDB_FR_REG7) + LONGSIZE) /* 8 */ -#define GDB_FR_REG9 ((GDB_FR_REG8) + LONGSIZE) /* 9 */ -#define GDB_FR_REG10 ((GDB_FR_REG9) + LONGSIZE) /* 10 */ -#define GDB_FR_REG11 ((GDB_FR_REG10) + LONGSIZE) /* 11 */ -#define GDB_FR_REG12 ((GDB_FR_REG11) + LONGSIZE) /* 12 */ -#define GDB_FR_REG13 ((GDB_FR_REG12) + LONGSIZE) /* 13 */ -#define GDB_FR_REG14 ((GDB_FR_REG13) + LONGSIZE) /* 14 */ -#define GDB_FR_REG15 ((GDB_FR_REG14) + LONGSIZE) /* 15 */ -#define GDB_FR_REG16 ((GDB_FR_REG15) + LONGSIZE) /* 16 */ -#define GDB_FR_REG17 ((GDB_FR_REG16) + LONGSIZE) /* 17 */ -#define GDB_FR_REG18 ((GDB_FR_REG17) + LONGSIZE) /* 18 */ -#define GDB_FR_REG19 ((GDB_FR_REG18) + LONGSIZE) /* 19 */ -#define GDB_FR_REG20 ((GDB_FR_REG19) + LONGSIZE) /* 20 */ -#define GDB_FR_REG21 ((GDB_FR_REG20) + LONGSIZE) /* 21 */ -#define GDB_FR_REG22 ((GDB_FR_REG21) + LONGSIZE) /* 22 */ -#define GDB_FR_REG23 ((GDB_FR_REG22) + LONGSIZE) /* 23 */ -#define GDB_FR_REG24 ((GDB_FR_REG23) + LONGSIZE) /* 24 */ -#define GDB_FR_REG25 ((GDB_FR_REG24) + LONGSIZE) /* 25 */ -#define GDB_FR_REG26 ((GDB_FR_REG25) + LONGSIZE) /* 26 */ -#define GDB_FR_REG27 ((GDB_FR_REG26) + LONGSIZE) /* 27 */ -#define GDB_FR_REG28 ((GDB_FR_REG27) + LONGSIZE) /* 28 */ -#define GDB_FR_REG29 ((GDB_FR_REG28) + LONGSIZE) /* 29 */ -#define GDB_FR_REG30 ((GDB_FR_REG29) + LONGSIZE) /* 30 */ -#define GDB_FR_REG31 ((GDB_FR_REG30) + LONGSIZE) /* 31 */ - -/* - * Saved special registers - */ -#define GDB_FR_STATUS ((GDB_FR_REG31) + LONGSIZE) /* 32 */ -#define GDB_FR_LO ((GDB_FR_STATUS) + LONGSIZE) /* 33 */ -#define GDB_FR_HI ((GDB_FR_LO) + LONGSIZE) /* 34 */ -#define GDB_FR_BADVADDR ((GDB_FR_HI) + LONGSIZE) /* 35 */ -#define GDB_FR_CAUSE ((GDB_FR_BADVADDR) + LONGSIZE) /* 36 */ -#define GDB_FR_EPC ((GDB_FR_CAUSE) + LONGSIZE) /* 37 */ - -/* - * Saved floating point registers - */ -#define GDB_FR_FPR0 ((GDB_FR_EPC) + LONGSIZE) /* 38 */ -#define GDB_FR_FPR1 ((GDB_FR_FPR0) + LONGSIZE) /* 39 */ -#define GDB_FR_FPR2 ((GDB_FR_FPR1) + LONGSIZE) /* 40 */ -#define GDB_FR_FPR3 ((GDB_FR_FPR2) + LONGSIZE) /* 41 */ -#define GDB_FR_FPR4 ((GDB_FR_FPR3) + LONGSIZE) /* 42 */ -#define GDB_FR_FPR5 ((GDB_FR_FPR4) + LONGSIZE) /* 43 */ -#define GDB_FR_FPR6 ((GDB_FR_FPR5) + LONGSIZE) /* 44 */ -#define GDB_FR_FPR7 ((GDB_FR_FPR6) + LONGSIZE) /* 45 */ -#define GDB_FR_FPR8 ((GDB_FR_FPR7) + LONGSIZE) /* 46 */ -#define GDB_FR_FPR9 ((GDB_FR_FPR8) + LONGSIZE) /* 47 */ -#define GDB_FR_FPR10 ((GDB_FR_FPR9) + LONGSIZE) /* 48 */ -#define GDB_FR_FPR11 ((GDB_FR_FPR10) + LONGSIZE) /* 49 */ -#define GDB_FR_FPR12 ((GDB_FR_FPR11) + LONGSIZE) /* 50 */ -#define GDB_FR_FPR13 ((GDB_FR_FPR12) + LONGSIZE) /* 51 */ -#define GDB_FR_FPR14 ((GDB_FR_FPR13) + LONGSIZE) /* 52 */ -#define GDB_FR_FPR15 ((GDB_FR_FPR14) + LONGSIZE) /* 53 */ -#define GDB_FR_FPR16 ((GDB_FR_FPR15) + LONGSIZE) /* 54 */ -#define GDB_FR_FPR17 ((GDB_FR_FPR16) + LONGSIZE) /* 55 */ -#define GDB_FR_FPR18 ((GDB_FR_FPR17) + LONGSIZE) /* 56 */ -#define GDB_FR_FPR19 ((GDB_FR_FPR18) + LONGSIZE) /* 57 */ -#define GDB_FR_FPR20 ((GDB_FR_FPR19) + LONGSIZE) /* 58 */ -#define GDB_FR_FPR21 ((GDB_FR_FPR20) + LONGSIZE) /* 59 */ -#define GDB_FR_FPR22 ((GDB_FR_FPR21) + LONGSIZE) /* 60 */ -#define GDB_FR_FPR23 ((GDB_FR_FPR22) + LONGSIZE) /* 61 */ -#define GDB_FR_FPR24 ((GDB_FR_FPR23) + LONGSIZE) /* 62 */ -#define GDB_FR_FPR25 ((GDB_FR_FPR24) + LONGSIZE) /* 63 */ -#define GDB_FR_FPR26 ((GDB_FR_FPR25) + LONGSIZE) /* 64 */ -#define GDB_FR_FPR27 ((GDB_FR_FPR26) + LONGSIZE) /* 65 */ -#define GDB_FR_FPR28 ((GDB_FR_FPR27) + LONGSIZE) /* 66 */ -#define GDB_FR_FPR29 ((GDB_FR_FPR28) + LONGSIZE) /* 67 */ -#define GDB_FR_FPR30 ((GDB_FR_FPR29) + LONGSIZE) /* 68 */ -#define GDB_FR_FPR31 ((GDB_FR_FPR30) + LONGSIZE) /* 69 */ - -#define GDB_FR_FSR ((GDB_FR_FPR31) + LONGSIZE) /* 70 */ -#define GDB_FR_FIR ((GDB_FR_FSR) + LONGSIZE) /* 71 */ -#define GDB_FR_FRP ((GDB_FR_FIR) + LONGSIZE) /* 72 */ - -#define GDB_FR_DUMMY ((GDB_FR_FRP) + LONGSIZE) /* 73, unused ??? */ - -/* - * Again, CP0 registers - */ -#define GDB_FR_CP0_INDEX ((GDB_FR_DUMMY) + LONGSIZE) /* 74 */ -#define GDB_FR_CP0_RANDOM ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */ -#define GDB_FR_CP0_ENTRYLO0 ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */ -#define GDB_FR_CP0_ENTRYLO1 ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */ -#define GDB_FR_CP0_CONTEXT ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */ -#define GDB_FR_CP0_PAGEMASK ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */ -#define GDB_FR_CP0_WIRED ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */ -#define GDB_FR_CP0_REG7 ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */ -#define GDB_FR_CP0_REG8 ((GDB_FR_CP0_REG7) + LONGSIZE) /* 82 */ -#define GDB_FR_CP0_REG9 ((GDB_FR_CP0_REG8) + LONGSIZE) /* 83 */ -#define GDB_FR_CP0_ENTRYHI ((GDB_FR_CP0_REG9) + LONGSIZE) /* 84 */ -#define GDB_FR_CP0_REG11 ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */ -#define GDB_FR_CP0_REG12 ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */ -#define GDB_FR_CP0_REG13 ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */ -#define GDB_FR_CP0_REG14 ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */ -#define GDB_FR_CP0_PRID ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */ - -#define GDB_FR_SIZE ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1)) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* - * Pad bytes for argument save space on the stack - * 24/48 Bytes for 32/64 bit code - */ - unsigned long pad0[6]; - - /* - * saved main processor registers - */ - long reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7; - long reg8, reg9, reg10, reg11, reg12, reg13, reg14, reg15; - long reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23; - long reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31; - - /* - * Saved special registers - */ - long cp0_status; - long lo; - long hi; - long cp0_badvaddr; - long cp0_cause; - long cp0_epc; - - /* - * Saved floating point registers - */ - long fpr0, fpr1, fpr2, fpr3, fpr4, fpr5, fpr6, fpr7; - long fpr8, fpr9, fpr10, fpr11, fpr12, fpr13, fpr14, fpr15; - long fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23; - long fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31; - - long cp1_fsr; - long cp1_fir; - - /* - * Frame pointer - */ - long frame_ptr; - long dummy; /* unused */ - - /* - * saved cp0 registers - */ - long cp0_index; - long cp0_random; - long cp0_entrylo0; - long cp0_entrylo1; - long cp0_context; - long cp0_pagemask; - long cp0_wired; - long cp0_reg7; - long cp0_reg8; - long cp0_reg9; - long cp0_entryhi; - long cp0_reg11; - long cp0_reg12; - long cp0_reg13; - long cp0_reg14; - long cp0_prid; -}; - -/* - * Prototypes - */ - -extern int kgdb_enabled; -void set_debug_traps(void); -void set_async_breakpoint(unsigned long *epc); - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h index 6ece1b0376655be5d6ab0fbcdbc6369f7f68acac..5bf62aafc8909308c40d3de0452f764eab88a55c 100644 --- a/include/asm-mips/kdebug.h +++ b/include/asm-mips/kdebug.h @@ -1 +1,13 @@ -#include +#ifndef _ASM_MIPS_KDEBUG_H +#define _ASM_MIPS_KDEBUG_H + +#include + +enum die_val { + DIE_OOPS = 1, + DIE_FP, + DIE_TRAP, + DIE_RI, +}; + +#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h new file mode 100644 index 0000000000000000000000000000000000000000..48223b09396cd12e0165341872f57791c1c6c393 --- /dev/null +++ b/include/asm-mips/kgdb.h @@ -0,0 +1,44 @@ +#ifndef __ASM_KGDB_H_ +#define __ASM_KGDB_H_ + +#ifdef __KERNEL__ + +#include + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) + +#define KGDB_GDB_REG_SIZE 32 + +#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS64) + +#ifdef CONFIG_32BIT +#define KGDB_GDB_REG_SIZE 32 +#else /* CONFIG_CPU_32BIT */ +#define KGDB_GDB_REG_SIZE 64 +#endif +#else +#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" +#endif /* _MIPS_ISA */ + +#define BUFMAX 2048 +#if (KGDB_GDB_REG_SIZE == 32) +#define NUMREGBYTES (90*sizeof(u32)) +#define NUMCRITREGBYTES (12*sizeof(u32)) +#else +#define NUMREGBYTES (90*sizeof(u64)) +#define NUMCRITREGBYTES (12*sizeof(u64)) +#endif +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 0 + +extern void arch_kgdb_breakpoint(void); +extern int kgdb_early_setup; +extern void *saved_vectors[32]; +extern void handle_exception(struct pt_regs *regs); +extern void breakinst(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_KGDB_H_ */ diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index c205875d7f31001efd3fe0bbd553322d2097a259..5510c53b7feb7f5b7d2e721b70c763d055f8ef0d 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) extern int pci_probe_only; +extern char * (*pcibios_plat_setup)(char *str); + #endif /* _ASM_PCI_H */ diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index cbae37ec3d8824fba82ec886e1eaa305b75c6b1b..5b1ccf901c625a99931e6ed8e6e3a34c622c3312 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); void prom_init_cmdline(void); char *prom_getcmdline(void); +void txx9_wdt_init(unsigned long base); +void txx9_spi_init(int busid, unsigned long base, int irq); +void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); +void txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts); +void prom_putchar(char c); +#ifdef CONFIG_EARLY_PRINTK +extern void (*txx9_prom_putchar)(char c); +void txx9_sio_putchar_init(unsigned long baseaddr); +#else +static inline void txx9_sio_putchar_init(unsigned long baseaddr) +{ +} +#endif #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h index d6eb1b6a54eb002724ea5b22b61ecd3eb40686c5..a409c446bf18772c629d0711d654db2656c6d78a 100644 --- a/include/asm-mips/txx9/jmr3927.h +++ b/include/asm-mips/txx9/jmr3927.h @@ -149,8 +149,6 @@ /* Clocks */ #define JMR3927_CORECLK 132710400 /* 132.7MHz */ -#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */ -#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */ /* * TX3927 Pin Configuration: diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h index d89a45091e2403cd8aeec2197248a31c5fcf21f3..3d32529060aaf999090253b3b86b117364e5204b 100644 --- a/include/asm-mips/txx9/pci.h +++ b/include/asm-mips/txx9/pci.h @@ -33,4 +33,7 @@ enum txx9_pci_err_action { }; extern enum txx9_pci_err_action txx9_pci_err_action; +extern char * (*txx9_board_pcibios_setup)(char *str); +char *txx9_pcibios_setup(char *str); + #endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h index 9375e4fc2289bd6132cd68009ff7715ab3e8b9d3..02e161d0755d3d62de502c86796270c65fcfe86b 100644 --- a/include/asm-mips/txx9/smsc_fdc37m81x.h +++ b/include/asm-mips/txx9/smsc_fdc37m81x.h @@ -56,7 +56,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -unsigned long __init smsc_fdc37m81x_init(unsigned long port); +unsigned long smsc_fdc37m81x_init(unsigned long port); void smsc_fdc37m81x_config_beg(void); diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index ea79e1b16e713753f8268f5a016c192710b6f0ef..587deb9592d2a300ae280cec12b1c90b680e76f0 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -8,9 +8,8 @@ #ifndef __ASM_TXX9_TX3927_H #define __ASM_TXX9_TX3927_H -#include - #define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 #define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) #define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) #define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) @@ -236,11 +235,17 @@ struct tx3927_ccfg_reg { /* see PCI_STATUS_XXX in linux/pci.h */ #define PCI_STATUS_NEW_CAP 0x0010 +/* bits for ISTAT/IIM */ +#define TX3927_PCIC_IIM_ALL 0x00001600 + /* bits for TC */ #define TX3927_PCIC_TC_OF16E 0x00000020 #define TX3927_PCIC_TC_IF8E 0x00000010 #define TX3927_PCIC_TC_OF8E 0x00000008 +/* bits for TSTAT/TIM */ +#define TX3927_PCIC_TIM_ALL 0x0003ffff + /* bits for IOBA/MBA */ /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ @@ -313,12 +318,22 @@ struct tx3927_ccfg_reg { #define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) #define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) #define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) -#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) +#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) +#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) +#define TX3927_ROMC_SIZE(ch) \ + (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) + +void tx3927_wdt_init(void); +void tx3927_setup(void); +void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); +void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); struct pci_controller; -void __init tx3927_pcic_setup(struct pci_controller *channel, - unsigned long sdram_size, int extarb); +void tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); +void tx3927_setup_pcierr_irq(void); +void tx3927_irq_init(void); #endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index ceb4b79ff4e365f335b08861946e02f5e03d8c0c..195f6515db9aeabe50eab868640f655f4e8abd3d 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new) } unsigned int tx4927_get_mem_size(void); -void tx4927_wdr_init(void); +void tx4927_wdt_init(void); void tx4927_setup(void); void tx4927_time_init(unsigned int tmrnr); -void tx4927_setup_serial(void); +void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); +void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h index d61c3d09c4a222ce584ec053dcde3b9d8a7828aa..c470b8a5fe570dfa79807f746697643e2633f3f0 100644 --- a/include/asm-mips/txx9/tx4927pcic.h +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -10,6 +10,7 @@ #define __ASM_TXX9_TX4927PCIC_H #include +#include struct tx4927_pcic_reg { u32 pciid; @@ -192,8 +193,11 @@ struct tx4927_pcic_reg { struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( struct pci_controller *channel); -void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, - struct pci_controller *channel, int extarb); +void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); void tx4927_report_pcic_status(void); +char *tx4927_pcibios_setup(char *str); +void tx4927_dump_pcic_settings(void); +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); #endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 1ed969d381d6949a0ee74e44fc137509e0a84272..8175d4ccbc39f08d5a22936b779da452a8adeea9 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -276,15 +276,18 @@ struct tx4938_ccfg_reg { #define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) #define tx4938_get_mem_size() tx4927_get_mem_size() -void tx4938_wdr_init(void); +void tx4938_wdt_init(void); void tx4938_setup(void); void tx4938_time_init(unsigned int tmrnr); -void tx4938_setup_serial(void); +void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); +void tx4938_spi_init(int busid); +void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); int tx4938_report_pciclk(void); void tx4938_report_pci1clk(void); int tx4938_pciclk66_setup(void); struct pci_dev; int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); #endif diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h deleted file mode 100644 index 97dd7ad1a89066097731bd263f3221568ff36263..0000000000000000000000000000000000000000 --- a/include/asm-mips/txx9/txx927.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Common definitions for TX3927/TX4927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TXX9_TXX927_H -#define __ASM_TXX9_TXX927_H - -struct txx927_sio_reg { - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; -}; - -/* - * SIO - */ -/* SILCR : Line Control */ -#define TXx927_SILCR_SCS_MASK 0x00000060 -#define TXx927_SILCR_SCS_IMCLK 0x00000000 -#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXx927_SILCR_SCS_SCLK 0x00000040 -#define TXx927_SILCR_SCS_SCLK_BG 0x00000060 -#define TXx927_SILCR_UEPS 0x00000010 -#define TXx927_SILCR_UPEN 0x00000008 -#define TXx927_SILCR_USBL_MASK 0x00000004 -#define TXx927_SILCR_USBL_1BIT 0x00000004 -#define TXx927_SILCR_USBL_2BIT 0x00000000 -#define TXx927_SILCR_UMODE_MASK 0x00000003 -#define TXx927_SILCR_UMODE_8BIT 0x00000000 -#define TXx927_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXx927_SIDICR_TDE 0x00008000 -#define TXx927_SIDICR_RDE 0x00004000 -#define TXx927_SIDICR_TIE 0x00002000 -#define TXx927_SIDICR_RIE 0x00001000 -#define TXx927_SIDICR_SPIE 0x00000800 -#define TXx927_SIDICR_CTSAC 0x00000600 -#define TXx927_SIDICR_STIE_MASK 0x0000003f -#define TXx927_SIDICR_STIE_OERS 0x00000020 -#define TXx927_SIDICR_STIE_CTSS 0x00000010 -#define TXx927_SIDICR_STIE_RBRKD 0x00000008 -#define TXx927_SIDICR_STIE_TRDY 0x00000004 -#define TXx927_SIDICR_STIE_TXALS 0x00000002 -#define TXx927_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXx927_SIDISR_UBRK 0x00008000 -#define TXx927_SIDISR_UVALID 0x00004000 -#define TXx927_SIDISR_UFER 0x00002000 -#define TXx927_SIDISR_UPER 0x00001000 -#define TXx927_SIDISR_UOER 0x00000800 -#define TXx927_SIDISR_ERI 0x00000400 -#define TXx927_SIDISR_TOUT 0x00000200 -#define TXx927_SIDISR_TDIS 0x00000100 -#define TXx927_SIDISR_RDIS 0x00000080 -#define TXx927_SIDISR_STIS 0x00000040 -#define TXx927_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXx927_SICISR_OERS 0x00000020 -#define TXx927_SICISR_CTSS 0x00000010 -#define TXx927_SICISR_RBRKD 0x00000008 -#define TXx927_SICISR_TRDY 0x00000004 -#define TXx927_SICISR_TXALS 0x00000002 -#define TXx927_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXx927_SIFCR_SWRST 0x00008000 -#define TXx927_SIFCR_RDIL_MASK 0x00000180 -#define TXx927_SIFCR_RDIL_1 0x00000000 -#define TXx927_SIFCR_RDIL_4 0x00000080 -#define TXx927_SIFCR_RDIL_8 0x00000100 -#define TXx927_SIFCR_RDIL_12 0x00000180 -#define TXx927_SIFCR_RDIL_MAX 0x00000180 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_1 0x00000000 -#define TXx927_SIFCR_TDIL_4 0x00000001 -#define TXx927_SIFCR_TDIL_8 0x00000010 -#define TXx927_SIFCR_TDIL_MAX 0x00000010 -#define TXx927_SIFCR_TFRST 0x00000004 -#define TXx927_SIFCR_RFRST 0x00000002 -#define TXx927_SIFCR_FRSTE 0x00000001 -#define TXx927_SIO_TX_FIFO 8 -#define TXx927_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXx927_SIFLCR_RCS 0x00001000 -#define TXx927_SIFLCR_TES 0x00000800 -#define TXx927_SIFLCR_RTSSC 0x00000200 -#define TXx927_SIFLCR_RSDE 0x00000100 -#define TXx927_SIFLCR_TSDE 0x00000080 -#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e -#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e -#define TXx927_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXx927_SIBGR_BCLK_MASK 0x00000300 -#define TXx927_SIBGR_BCLK_T0 0x00000000 -#define TXx927_SIBGR_BCLK_T2 0x00000100 -#define TXx927_SIBGR_BCLK_T4 0x00000200 -#define TXx927_SIBGR_BCLK_T6 0x00000300 -#define TXx927_SIBGR_BRD_MASK 0x000000ff - -/* - * PIO - */ - -#endif /* __ASM_TXX9_TXX927_H */ diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h index 1c439e51b875ed8d6b427334f16579aff23e2273..5620879be37fb632310fe137264e2ef525cf3b9d 100644 --- a/include/asm-mips/txx9irq.h +++ b/include/asm-mips/txx9irq.h @@ -14,8 +14,12 @@ #ifdef CONFIG_IRQ_CPU #define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) #else +#ifdef CONFIG_I8259 +#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) +#else #define TXX9_IRQ_BASE 0 #endif +#endif #ifdef CONFIG_CPU_TX39XX #define TXx9_MAX_IR 16