From 85ee7a1d39d75d23d21f3871f6dc9b87d572747a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sat, 23 Apr 2011 20:38:19 -0700 Subject: [PATCH] treewide: cleanup continuations and remove logging message whitespace Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- arch/arm/plat-mxc/cpufreq.c | 4 +-- drivers/dma/dmatest.c | 4 +-- drivers/firmware/iscsi_ibft.c | 4 +-- drivers/gpio/ab8500-gpio.c | 7 +++-- .../media/video/usbvision/usbvision-video.c | 5 ++-- drivers/message/fusion/mptbase.c | 22 +++++++-------- drivers/misc/bh1780gli.c | 8 +++--- drivers/misc/spear13xx_pcie_gadget.c | 4 +-- drivers/net/atlx/atl1.c | 5 ++-- drivers/net/wireless/airo.c | 27 ++++++++++--------- .../net/wireless/iwlegacy/iwl-4965-calib.c | 4 +-- drivers/net/wireless/iwlwifi/iwl-agn-calib.c | 4 +-- drivers/regulator/max8998.c | 4 +-- drivers/tty/serial/bfin_sport_uart.c | 3 +-- drivers/tty/serial/mfd.c | 4 +-- drivers/usb/host/uhci-hcd.c | 7 ++--- drivers/usb/storage/ene_ub6250.c | 4 +-- 17 files changed, 60 insertions(+), 60 deletions(-) diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 4268a2bdf145..74aac96cda20 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -153,8 +153,8 @@ static int __init mxc_cpufreq_init(struct cpufreq_policy *policy) ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); if (ret < 0) { - printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \ - with error code %d\n", __func__, ret); + printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", + __func__, ret); goto err; } diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index e0888cb538d4..8597ff269bfd 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -56,8 +56,8 @@ MODULE_PARM_DESC(pq_sources, static int timeout = 3000; module_param(timeout, uint, S_IRUGO); -MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), \ - Pass -1 for infinite timeout"); +MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), " + "Pass -1 for infinite timeout"); /* * Initialization patterns. All bytes in the source buffer has bit 7 diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index 6148a1c67895..ce33f4626957 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -87,8 +87,8 @@ #define IBFT_ISCSI_VERSION "0.5.0" #define IBFT_ISCSI_DATE "2010-Feb-25" -MODULE_AUTHOR("Peter Jones and \ -Konrad Rzeszutek "); +MODULE_AUTHOR("Peter Jones and " + "Konrad Rzeszutek "); MODULE_DESCRIPTION("sysfs interface to BIOS iBFT information"); MODULE_LICENSE("GPL"); MODULE_VERSION(IBFT_ISCSI_VERSION); diff --git a/drivers/gpio/ab8500-gpio.c b/drivers/gpio/ab8500-gpio.c index e7b834d054b7..970053c89ff7 100644 --- a/drivers/gpio/ab8500-gpio.c +++ b/drivers/gpio/ab8500-gpio.c @@ -482,8 +482,8 @@ static int __devexit ab8500_gpio_remove(struct platform_device *pdev) ret = gpiochip_remove(&ab8500_gpio->chip); if (ret < 0) { - dev_err(ab8500_gpio->dev, "unable to remove gpiochip:\ - %d\n", ret); + dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", + ret); return ret; } @@ -516,7 +516,6 @@ static void __exit ab8500_gpio_exit(void) module_exit(ab8500_gpio_exit); MODULE_AUTHOR("BIBEK BASU "); -MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins\ - to be used as GPIO"); +MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); MODULE_ALIAS("AB8500 GPIO driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 6083137f0bf8..9855fbe5927a 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -70,8 +70,9 @@ #include "usbvision.h" #include "usbvision-cards.h" -#define DRIVER_AUTHOR "Joerg Heckenbach , \ -Dwaine Garden " +#define DRIVER_AUTHOR \ + "Joerg Heckenbach , " \ + "Dwaine Garden " #define DRIVER_NAME "usbvision" #define DRIVER_ALIAS "USBVision" #define DRIVER_DESC "USBVision USB Video Device Driver for Linux" diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index fa15e853d4e8..7956a10f9488 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -83,19 +83,18 @@ MODULE_VERSION(my_VERSION); static int mpt_msi_enable_spi; module_param(mpt_msi_enable_spi, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_spi, " Enable MSI Support for SPI \ - controllers (default=0)"); +MODULE_PARM_DESC(mpt_msi_enable_spi, + " Enable MSI Support for SPI controllers (default=0)"); static int mpt_msi_enable_fc; module_param(mpt_msi_enable_fc, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_fc, " Enable MSI Support for FC \ - controllers (default=0)"); +MODULE_PARM_DESC(mpt_msi_enable_fc, + " Enable MSI Support for FC controllers (default=0)"); static int mpt_msi_enable_sas; module_param(mpt_msi_enable_sas, int, 0); -MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \ - controllers (default=0)"); - +MODULE_PARM_DESC(mpt_msi_enable_sas, + " Enable MSI Support for SAS controllers (default=0)"); static int mpt_channel_mapping; module_param(mpt_channel_mapping, int, 0); @@ -105,15 +104,14 @@ static int mpt_debug_level; static int mpt_set_debug_level(const char *val, struct kernel_param *kp); module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int, &mpt_debug_level, 0600); -MODULE_PARM_DESC(mpt_debug_level, " debug level - refer to mptdebug.h \ - - (default=0)"); +MODULE_PARM_DESC(mpt_debug_level, + " debug level - refer to mptdebug.h - (default=0)"); int mpt_fwfault_debug; EXPORT_SYMBOL(mpt_fwfault_debug); module_param(mpt_fwfault_debug, int, 0600); -MODULE_PARM_DESC(mpt_fwfault_debug, "Enable detection of Firmware fault" - " and halt Firmware on fault - (default=0)"); - +MODULE_PARM_DESC(mpt_fwfault_debug, + "Enable detection of Firmware fault and halt Firmware on fault - (default=0)"); static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS][50]; diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c index d07cd67c951c..82fe2d067827 100644 --- a/drivers/misc/bh1780gli.c +++ b/drivers/misc/bh1780gli.c @@ -49,8 +49,8 @@ static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg) int ret = i2c_smbus_write_byte_data(ddata->client, reg, val); if (ret < 0) dev_err(&ddata->client->dev, - "i2c_smbus_write_byte_data failed error %d\ - Register (%s)\n", ret, msg); + "i2c_smbus_write_byte_data failed error %d Register (%s)\n", + ret, msg); return ret; } @@ -59,8 +59,8 @@ static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg) int ret = i2c_smbus_read_byte_data(ddata->client, reg); if (ret < 0) dev_err(&ddata->client->dev, - "i2c_smbus_read_byte_data failed error %d\ - Register (%s)\n", ret, msg); + "i2c_smbus_read_byte_data failed error %d Register (%s)\n", + ret, msg); return ret; } diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c index ec3b8c911833..7aded90f9daa 100644 --- a/drivers/misc/spear13xx_pcie_gadget.c +++ b/drivers/misc/spear13xx_pcie_gadget.c @@ -787,8 +787,8 @@ static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev) status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL); if (status) { - dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \ - claimed\n", irq); + dev_err(&pdev->dev, + "pcie gadget interrupt IRQ%d already claimed\n", irq); goto err_iounmap; } diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 67f40b9c16ed..d9951bbc7212 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -83,8 +83,9 @@ #include "atl1.h" #define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang , \ -Chris Snook , Jay Cliburn "); +MODULE_AUTHOR("Xiong Huang , " + "Chris Snook , " + "Jay Cliburn "); MODULE_LICENSE("GPL"); MODULE_VERSION(ATLX_DRIVER_VERSION); diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 4e5c7a11f04a..a70c512f05d2 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -242,9 +242,8 @@ static int airo_perm = 0555; static int proc_perm = 0644; MODULE_AUTHOR("Benjamin Reed"); -MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \ -cards. Direct support for ISA/PCI/MPI cards and support \ -for PCMCIA when used with airo_cs."); +MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. " + "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs."); MODULE_LICENSE("Dual BSD/GPL"); MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); module_param_array(io, int, NULL, 0); @@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0); module_param_array(rates, int, NULL, 0); module_param_array(ssids, charp, NULL, 0); module_param(auto_wep, int, 0); -MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \ -the authentication options until an association is made. The value of \ -auto_wep is number of the wep keys to check. A value of 2 will try using \ -the key at index 0 and index 1."); +MODULE_PARM_DESC(auto_wep, + "If non-zero, the driver will keep looping through the authentication options until an association is made. " + "The value of auto_wep is number of the wep keys to check. " + "A value of 2 will try using the key at index 0 and index 1."); module_param(aux_bap, int, 0); -MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \ -than seems to work better for older cards with some older buses. Before \ -switching it checks that the switch is needed."); +MODULE_PARM_DESC(aux_bap, + "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses. " + "Before switching it checks that the switch is needed."); module_param(maxencrypt, int, 0); -MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \ -encryption. Units are in 512kbs. Zero (default) means there is no limit. \ -Older cards used to be limited to 2mbs (4)."); +MODULE_PARM_DESC(maxencrypt, + "The maximum speed that the card can do encryption. " + "Units are in 512kbs. " + "Zero (default) means there is no limit. " + "Older cards used to be limited to 2mbs (4)."); module_param(adhoc, int, 0); MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode."); module_param(probe, int, 0); diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c index 81d6a25eb04f..162d877e6869 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c @@ -713,8 +713,8 @@ iwl4965_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, iwl4965_find_first_chain(priv->cfg->valid_tx_ant); data->disconn_array[first_chain] = 0; active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \ - W/A - declare %d as connected\n", + IWL_DEBUG_CALIB(priv, + "All Tx chains are disconnected W/A - declare %d as connected\n", first_chain); break; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c index 9006293e740c..f35ac8ccd52d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c @@ -824,8 +824,8 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig, find_first_chain(priv->cfg->valid_tx_ant); data->disconn_array[first_chain] = 0; active_chains |= BIT(first_chain); - IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \ - W/A - declare %d as connected\n", + IWL_DEBUG_CALIB(priv, + "All Tx chains are disconnected W/A - declare %d as connected\n", first_chain); break; } diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 43410266f993..f57e9c42fdb4 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -405,8 +405,8 @@ static int max8998_set_voltage_buck(struct regulator_dev *rdev, switch (buck) { case MAX8998_BUCK1: dev_dbg(max8998->dev, - "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n\ - buck1_vol3:%d, buck1_vol4:%d\n", + "BUCK1, i:%d, buck1_vol1:%d, buck1_vol2:%d\n" + "buck1_vol3:%d, buck1_vol4:%d\n", i, max8998->buck1_vol[0], max8998->buck1_vol[1], max8998->buck1_vol[2], max8998->buck1_vol[3]); diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index c3ec0a61d859..891d194ae754 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -296,8 +296,7 @@ static int sport_startup(struct uart_port *port) IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_DISABLED, "BFIN_SPORT_UART_CTS", up)) { up->cts_pin = -1; - dev_info(port->dev, "Unable to attach BlackFin UART \ - over SPORT CTS interrupt. So, disable it.\n"); + dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n"); } } if (up->rts_pin >= 0) diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index c111f36f5d21..cab52f4a88b0 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -49,8 +49,8 @@ static int hsu_dma_enable; module_param(hsu_dma_enable, int, 0); -MODULE_PARM_DESC(hsu_dma_enable, "It is a bitmap to set working mode, if \ -bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); +MODULE_PARM_DESC(hsu_dma_enable, + "It is a bitmap to set working mode, if bit[x] is 1, then port[x] will work in DMA mode, otherwise in PIO mode."); struct hsu_dma_buffer { u8 *buf; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4f65b14e5e08..448b9d1f0e70 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -53,9 +53,10 @@ /* * Version Information */ -#define DRIVER_AUTHOR "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, \ -Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber, \ -Alan Stern" +#define DRIVER_AUTHOR \ + "Linus 'Frodo Rabbit' Torvalds, Johannes Erdfelt, " \ + "Randy Dunlap, Georg Acher, Deti Fliegl, Thomas Sailer, " \ + "Roman Weissgaerber, Alan Stern" #define DRIVER_DESC "USB Universal Host Controller Interface driver" /* for flakey hardware, ignore overcurrent indicators */ diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 0e5aafda4537..31645afff5fc 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -715,8 +715,8 @@ static int ene_ub6250_probe(struct usb_interface *intf, if (!(misc_reg03 & 0x01)) { result = -ENODEV; - printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD\ - card. To use SM/MS card, please build driver/stagging/keucr\n"); + printk(KERN_NOTICE "ums_eneub6250: The driver only supports SD card. " + "To use SM/MS card, please build driver/staging/keucr\n"); usb_stor_disconnect(intf); } -- GitLab