Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Kevin Hilman:
 "A collection of ARM SoC fixes for v3.14-rc1.

  Mostly a collection of Kconfig, device tree data and compilation fixes
  along with fix to drivers/phy that fixes a boot regression on some
  Marvell mvebu platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  dma: mv_xor: Silence a bunch of LPAE-related warnings
  ARM: ux500: disable msp2 device tree node
  ARM: zynq: Reserve not DMAable space in front of the kernel
  ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
  ARM: imx6: Initialize low-power mode early again
  ARM: pxa: fix various compilation problems
  ARM: pxa: fix compilation problem on AM300EPD board
  ARM: at91: add Atmel's SAMA5D3 Xplained board
  spi/atmel: document clock properties
  mmc: atmel-mci: document clock properties
  ARM: at91: enable USB host on at91sam9n12ek board
  ARM: at91/dt: fix sama5d3 ohci hclk clock reference
  ARM: at91/dt: sam9263: fix compatibility string for the I2C
  ata: sata_mv: Fix probe failures with optional phys
  drivers: phy: Add support for optional phys
  drivers: phy: Make NULL a valid phy reference
  ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile
  ARM: moxart: move DMA_OF selection to driver
  ARM: hisi: fix kconfig warning on HAVE_ARM_TWD

Documentation/devicetree/bindings/mmc/atmel-hsmci.txt

@@ -13,6 +13,9 @@ Required properties:
 - #address-cells: should be one. The cell is the slot id.
 - #size-cells: should be zero.
 - at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.
 
 The node contains child nodes for each slot that the platform uses
 
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
 	interrupts = <12 4>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;
 
 	[ child node definitions...]
 };

Documentation/devicetree/bindings/spi/spi_atmel.txt

@@ -5,6 +5,9 @@ Required properties:
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+	Required elements: "spi_clk"
+- clocks: phandles to input clocks.
 
 Example:
 
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
 	interrupts = <13 4 5>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&spi1_clk>;
+	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
 	status = "okay";
 

Documentation/phy.txt

@@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
 it. This framework provides the following APIs to get a reference to the PHY.
 
 struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY.  The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
 
 5. Releasing a reference to the PHY
 

arch/arm/boot/dts/Makefile

@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
 # sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb

arch/arm/boot/dts/at91-sama5d3_xplained.dts

+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};

arch/arm/boot/dts/at91sam9263.dtsi

@@ -523,7 +523,7 @@
 			};
 
 			i2c0: i2c@fff88000 {
-				compatible = "atmel,at91sam9263-i2c";
+				compatible = "atmel,at91sam9260-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -124,6 +124,10 @@
 			nand-on-flash-bbt;
 			status = "okay";
 		};
+
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/sama5d3.dtsi

@@ -1228,7 +1228,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
 				 <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";

arch/arm/boot/dts/ste-href.dtsi

@@ -188,7 +188,6 @@
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};
 
 		msp3: msp@80125000 {

arch/arm/configs/multi_v7_defconfig

@@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y

arch/arm/mach-hisi/Kconfig

@@ -8,7 +8,7 @@ config ARCH_HI3xxx
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SINGLE

arch/arm/mach-imx/clk-imx6q.c

@@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
 		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-imx/clk-imx6sl.c

@@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	/* Audio-related clocks configuration */
 	clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-imx/pm-imx6q.c

@@ -236,8 +236,6 @@ void __init imx6q_pm_init(void)
 		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
 				   IMX6Q_GPR1_GINT);
 
-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);
 
 	suspend_set_ops(&imx6q_pm_ops);
 }

arch/arm/mach-moxart/Kconfig

@@ -2,7 +2,6 @@ config ARCH_MOXART
 	bool "MOXA ART SoC" if ARCH_MULTI_V4T
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select DMA_OF
 	select USE_OF
 	select CLKSRC_OF
 	select CLKSRC_MMIO

arch/arm/mach-omap2/Kconfig

@@ -54,7 +54,7 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP

arch/arm/mach-pxa/am300epd.c

@@ -30,6 +30,7 @@
 
 #include <mach/gumstix.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"

arch/arm/mach-pxa/include/mach/balloon3.h

@@ -14,6 +14,8 @@
 #ifndef ASM_ARCH_BALLOON3_H
 #define ASM_ARCH_BALLOON3_H
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 enum balloon3_features {
 	BALLOON3_FEATURE_OHCI,
 	BALLOON3_FEATURE_MMC,

arch/arm/mach-pxa/include/mach/corgi.h

@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_CORGI_H
 #define __ASM_ARCH_CORGI_H  1
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
 
 /*
  * Corgi (Non Standard) GPIO Definitions

arch/arm/mach-pxa/include/mach/csb726.h

@@ -11,6 +11,8 @@
 #ifndef CSB726_H
 #define CSB726_H
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
 #define CSB726_GPIO_MMC_DETECT	100

arch/arm/mach-pxa/include/mach/gumstix.h

@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7

arch/arm/mach-pxa/include/mach/idp.h

@@ -23,6 +23,7 @@
  * IDP hardware.
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)

arch/arm/mach-pxa/include/mach/palmld.h

@@ -13,6 +13,8 @@
 #ifndef _INCLUDE_PALMLD_H_
 #define _INCLUDE_PALMLD_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmt5.h

@@ -15,6 +15,8 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmtc.h

@@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTC_H_
 #define _INCLUDE_PALMTC_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmtx.h

@@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTX_H_
 #define _INCLUDE_PALMTX_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/pcm027.h

@@ -23,6 +23,8 @@
  * Definitions of CPU card resources only
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
 #define PCM027_BTDET_IRQ       PCM027_IRQ(0)

arch/arm/mach-pxa/include/mach/pcm990_baseboard.h

@@ -20,6 +20,7 @@
  */
 
 #include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990

arch/arm/mach-pxa/include/mach/poodle.h

@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_POODLE_H
 #define __ASM_ARCH_POODLE_H  1
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /*
  * GPIOs
  */

arch/arm/mach-pxa/include/mach/spitz.h

@@ -15,8 +15,8 @@
 #define __ASM_ARCH_SPITZ_H  1
 #endif
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
 #include <linux/fb.h>
-#include <linux/gpio.h>
 
 /* Spitz/Akita GPIOs */
 

arch/arm/mach-pxa/include/mach/tosa.h

@@ -13,6 +13,8 @@
 #ifndef _ASM_ARCH_TOSA_H_
 #define _ASM_ARCH_TOSA_H_ 1
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 /*  TOSA Chip selects  */
 #define TOSA_LCDC_PHYS		PXA_CS4_PHYS
 /* Internel Scoop */

arch/arm/mach-pxa/include/mach/trizeps4.h

@@ -10,6 +10,8 @@
 #ifndef _TRIPEPS4_H_
 #define _TRIPEPS4_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* physical memory regions */
 #define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
 #define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */

arch/arm/mach-shmobile/Kconfig

@@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0

arch/arm/mach-zynq/common.c

@@ -25,6 +25,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 
@@ -41,6 +42,18 @@
 
 void __iomem *zynq_scu_base;
 
+/**
+ * zynq_memory_init - Initialize special memory
+ *
+ * We need to stop things allocating the low memory as DMA can't work in
+ * the 1st 512K of memory.
+ */
+static void __init zynq_memory_init(void)
+{
+	if (!__pa(PAGE_OFFSET))
+		memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+}
+
 static struct platform_device zynq_cpuidle_device = {
 	.name = "cpuidle-zynq",
 };
@@ -117,5 +130,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.init_machine	= zynq_init_machine,
 	.init_time	= zynq_timer_init,
 	.dt_compat	= zynq_dt_match,
+	.reserve	= zynq_memory_init,
 	.restart	= zynq_system_reset,
 MACHINE_END

drivers/ata/sata_mv.c

@@ -4126,12 +4126,14 @@ static int mv_platform_probe(struct platform_device *pdev)
 			clk_prepare_enable(hpriv->port_clks[port]);
 
 		sprintf(port_number, "port%d", port);
-		hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number);
+		hpriv->port_phys[port] = devm_phy_optional_get(&pdev->dev,
+							       port_number);
 		if (IS_ERR(hpriv->port_phys[port])) {
 			rc = PTR_ERR(hpriv->port_phys[port]);
 			hpriv->port_phys[port] = NULL;
-			if ((rc != -EPROBE_DEFER) && (rc != -ENODEV))
-				dev_warn(&pdev->dev, "error getting phy");
+			if (rc != -EPROBE_DEFER)
+				dev_warn(&pdev->dev, "error getting phy %d",
+					rc);
 			goto err;
 		} else
 			phy_power_on(hpriv->port_phys[port]);

drivers/dma/Kconfig

@@ -346,6 +346,7 @@ config MOXART_DMA
 	tristate "MOXART DMA support"
 	depends on ARCH_MOXART
 	select DMA_ENGINE
+	select DMA_OF
 	select DMA_VIRTUAL_CHANNELS
 	help
 	  Enable support for the MOXA ART SoC DMA controller.

drivers/dma/mv_xor.c

@@ -497,8 +497,8 @@ mv_xor_tx_submit(struct dma_async_tx_descriptor *tx)
 		if (!mv_can_chain(grp_start))
 			goto submit_done;
 
-		dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %x\n",
-			old_chain_tail->async_tx.phys);
+		dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %pa\n",
+			&old_chain_tail->async_tx.phys);
 
 		/* fix up the hardware chain */
 		mv_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
@@ -527,7 +527,8 @@ mv_xor_tx_submit(struct dma_async_tx_descriptor *tx)
 /* returns the number of allocated descriptors */
 static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
 {
-	char *hw_desc;
+	void *virt_desc;
+	dma_addr_t dma_desc;
 	int idx;
 	struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
 	struct mv_xor_desc_slot *slot = NULL;
@@ -542,17 +543,16 @@ static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
 				" %d descriptor slots", idx);
 			break;
 		}
-		hw_desc = (char *) mv_chan->dma_desc_pool_virt;
-		slot->hw_desc = (void *) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+		virt_desc = mv_chan->dma_desc_pool_virt;
+		slot->hw_desc = virt_desc + idx * MV_XOR_SLOT_SIZE;
 
 		dma_async_tx_descriptor_init(&slot->async_tx, chan);
 		slot->async_tx.tx_submit = mv_xor_tx_submit;
 		INIT_LIST_HEAD(&slot->chain_node);
 		INIT_LIST_HEAD(&slot->slot_node);
 		INIT_LIST_HEAD(&slot->tx_list);
-		hw_desc = (char *) mv_chan->dma_desc_pool;
-		slot->async_tx.phys =
-			(dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+		dma_desc = mv_chan->dma_desc_pool;
+		slot->async_tx.phys = dma_desc + idx * MV_XOR_SLOT_SIZE;
 		slot->idx = idx++;
 
 		spin_lock_bh(&mv_chan->lock);
@@ -582,8 +582,8 @@ mv_xor_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
 	int slot_cnt;
 
 	dev_dbg(mv_chan_to_devp(mv_chan),
-		"%s dest: %x src %x len: %u flags: %ld\n",
-		__func__, dest, src, len, flags);
+		"%s dest: %pad src %pad len: %u flags: %ld\n",
+		__func__, &dest, &src, len, flags);
 	if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
 		return NULL;
 
@@ -626,8 +626,8 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
 	BUG_ON(len > MV_XOR_MAX_BYTE_COUNT);
 
 	dev_dbg(mv_chan_to_devp(mv_chan),
-		"%s src_cnt: %d len: dest %x %u flags: %ld\n",
-		__func__, src_cnt, len, dest, flags);
+		"%s src_cnt: %d len: %u dest %pad flags: %ld\n",
+		__func__, src_cnt, len, &dest, flags);
 
 	spin_lock_bh(&mv_chan->lock);
 	slot_cnt = mv_chan_xor_slot_count(len, src_cnt);

drivers/phy/phy-core.c

@@ -162,6 +162,9 @@ int phy_init(struct phy *phy)
 {
 	int ret;
 
+	if (!phy)
+		return 0;
+
 	ret = phy_pm_runtime_get_sync(phy);
 	if (ret < 0 && ret != -ENOTSUPP)
 		return ret;
@@ -187,6 +190,9 @@ int phy_exit(struct phy *phy)
 {
 	int ret;
 
+	if (!phy)
+		return 0;
+
 	ret = phy_pm_runtime_get_sync(phy);
 	if (ret < 0 && ret != -ENOTSUPP)
 		return ret;
@@ -212,6 +218,9 @@ int phy_power_on(struct phy *phy)
 {
 	int ret;
 
+	if (!phy)
+		return 0;
+
 	ret = phy_pm_runtime_get_sync(phy);
 	if (ret < 0 && ret != -ENOTSUPP)
 		return ret;
@@ -240,6 +249,9 @@ int phy_power_off(struct phy *phy)
 {
 	int ret;
 
+	if (!phy)
+		return 0;
+
 	mutex_lock(&phy->mutex);
 	if (phy->power_count == 1 && phy->ops->power_off) {
 		ret =  phy->ops->power_off(phy);
@@ -308,7 +320,7 @@ static struct phy *of_phy_get(struct device *dev, int index)
  */
 void phy_put(struct phy *phy)
 {
-	if (IS_ERR(phy))
+	if (!phy || IS_ERR(phy))
 		return;
 
 	module_put(phy->ops->owner);
@@ -328,6 +340,9 @@ void devm_phy_put(struct device *dev, struct phy *phy)
 {
 	int r;
 
+	if (!phy)
+		return;
+
 	r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy);
 	dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
 }
@@ -410,6 +425,27 @@ struct phy *phy_get(struct device *dev, const char *string)
 }
 EXPORT_SYMBOL_GPL(phy_get);
 
+/**
+ * phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or the name of the controller
+ * port for non-dt case
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * NULL if there is no such phy.  The caller is responsible for
+ * calling phy_put() to release that count.
+ */
+struct phy *phy_optional_get(struct device *dev, const char *string)
+{
+	struct phy *phy = phy_get(dev, string);
+
+	if (PTR_ERR(phy) == -ENODEV)
+		phy = NULL;
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(phy_optional_get);
+
 /**
  * devm_phy_get() - lookup and obtain a reference to a phy.
  * @dev: device that requests this phy
@@ -440,6 +476,30 @@ struct phy *devm_phy_get(struct device *dev, const char *string)
 }
 EXPORT_SYMBOL_GPL(devm_phy_get);
 
+/**
+ * devm_phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or phy device name
+ * for non-dt case
+ *
+ * Gets the phy using phy_get(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres
+ * data, then, devres data is freed. This differs to devm_phy_get() in
+ * that if the phy does not exist, it is not considered an error and
+ * -ENODEV will not be returned. Instead the NULL phy is returned,
+ * which can be passed to all other phy consumer calls.
+ */
+struct phy *devm_phy_optional_get(struct device *dev, const char *string)
+{
+	struct phy *phy = devm_phy_get(dev, string);
+
+	if (PTR_ERR(phy) == -ENODEV)
+		phy = NULL;
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(devm_phy_optional_get);
+
 /**
  * phy_create() - create a new phy
  * @dev: device that is creating the new phy

include/linux/phy/phy.h

@@ -146,7 +146,9 @@ static inline void phy_set_bus_width(struct phy *phy, int bus_width)
 	phy->attrs.bus_width = bus_width;
 }
 struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
 void phy_put(struct phy *phy);
 void devm_phy_put(struct device *dev, struct phy *phy);
 struct phy *of_phy_simple_xlate(struct device *dev,
@@ -232,11 +234,23 @@ static inline struct phy *phy_get(struct device *dev, const char *string)
 	return ERR_PTR(-ENOSYS);
 }
 
+static inline struct phy *phy_optional_get(struct device *dev,
+					   const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 static inline struct phy *devm_phy_get(struct device *dev, const char *string)
 {
 	return ERR_PTR(-ENOSYS);
 }
 
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+						const char *string)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
 static inline void phy_put(struct phy *phy)
 {
 }