diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index b151fb1ddef0bc048289f3b5140d34cf0ef48348..cabc780f7258fc0c04875b859a7e45659b0e04af 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -181,9 +181,10 @@ External interrupts:
 fsl,mpc5200-mscan nodes
 -----------------------
 In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock shall be used for the bus:
+also specify which clock source shall be used for the controller:
 
-- fsl,mscan-clk-src	- a string describing the clock source. Valid values
-			  are "ip" for IP_CLK and "sys" for SYS_XTAL.
-			  "sys" is the default in case the property is not
+- fsl,mscan-clock-source- a string describing the clock source. Valid values
+			  are:	"ip" for ip bus clock
+				"ref" for reference clock (XTAL)
+			  "ref" is default in case this property is not
 			  present.
diff --git a/drivers/net/can/mscan/mpc52xx_can.c b/drivers/net/can/mscan/mpc52xx_can.c
index a915959b6b36d6dcde626b980b719090dc185757..1de6f6349b16c914c9ad01dcbe05fa99f5562872 100644
--- a/drivers/net/can/mscan/mpc52xx_can.c
+++ b/drivers/net/can/mscan/mpc52xx_can.c
@@ -130,7 +130,7 @@ static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
 	 * choice as it has less jitter. For this reason, it is selected
 	 * by default.
 	 */
-	clk_src = of_get_property(np, "fsl,mscan-clk-src", NULL);
+	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
 	if (clk_src && strcmp(clk_src, "ip") == 0)
 		clock_src = MSCAN_CLKSRC_BUS;
 	else
@@ -227,7 +227,6 @@ static int mpc5xxx_can_resume(struct of_device *ofdev)
 
 static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
 	{.compatible = "fsl,mpc5200-mscan"},
-	{.compatible = "fsl,mpc5200b-mscan"},
 	{},
 };