MN10300: Create general kernel debugger cache flushing

Create general kernel debugger cache flushing for MN10300 and get rid of the
old stuff that gdbstub was using.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

arch/mn10300/include/asm/debugger.h

@@ -14,6 +14,14 @@
 
 #if defined(CONFIG_KERNEL_DEBUGGER)
 
+#ifndef CONFIG_MN10300_DEBUGGER_CACHE_NO_FLUSH
+extern void debugger_local_cache_flushinv(void);
+extern void debugger_local_cache_flushinv_one(u8 *);
+#else
+static inline void debugger_local_cache_flushinv(void) {}
+static inline void debugger_local_cache_flushinv_one(u8 *addr) {}
+#endif
+
 #else /* CONFIG_KERNEL_DEBUGGER */
 
 #endif /* CONFIG_KERNEL_DEBUGGER */

arch/mn10300/kernel/Makefile

@@ -21,10 +21,6 @@ obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
 obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
 
-ifeq ($(CONFIG_MN10300_CACHE_ENABLED),y)
-obj-$(CONFIG_GDBSTUB) += gdb-cache.o
-endif
-
 obj-$(CONFIG_MN10300_RTC) += rtc.o
 obj-$(CONFIG_PROFILE) += profile.o profile-low.o
 obj-$(CONFIG_MODULES) += module.o

arch/mn10300/kernel/entry.S

@@ -306,36 +306,7 @@ ENTRY(nmi_handler)
 	movbu	d0,(GxICR(GDB_NMI_IPI))
 	movhu	(GxICR(GDB_NMI_IPI)),d0
 	and	~EPSW_NMID,epsw		# enable NMI
-#ifdef CONFIG_MN10300_CACHE_ENABLED
-	mov	(gdbstub_nmi_opr_type),d0
-	cmp	GDBSTUB_NMI_CACHE_PURGE,d0
-	bne	4f			# if not gdb cache purge, jump
-
-	# gdb cache purge nmi ipi
-	add	-20,sp
-	mov	d1,(4,sp)
-	mov	a0,(8,sp)
-	mov	a1,(12,sp)
-	mov	mdr,d0
-	mov	d0,(16,sp)
-	call	gdbstub_local_purge_cache[],0
-	mov	0x1,d0
-	mov	(CPUID),d1
-	asl	d1,d0
-	mov	gdbstub_nmi_cpumask,a0
-	bclr	d0,(a0)
-	mov	(4,sp),d1
-	mov	(8,sp),a0
-	mov	(12,sp),a1
-	mov	(16,sp),d0
-	mov	d0,mdr
-	add	20,sp
-	mov	(sp),d0
-	add	4,sp
-	rti
-4:
-#endif /* CONFIG_MN10300_CACHE_ENABLED */
-	# gdb wait nmi ipi
+
 	mov     (sp),d0
 	SAVE_ALL
 	call    gdbstub_nmi_wait[],0

arch/mn10300/kernel/gdb-cache.S

-###############################################################################
-#
-# MN10300 Low-level cache purging routines for gdbstub
-#
-# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
-# Written by David Howells (dhowells@redhat.com)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public Licence
-# as published by the Free Software Foundation; either version
-# 2 of the Licence, or (at your option) any later version.
-#
-###############################################################################
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <asm/smp.h>
-#include <asm/cache.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-#include <asm/frame.inc>
-#include <asm/serial-regs.h>
-
-	.text
-
-###############################################################################
-#
-# GDB stub cache purge
-#
-###############################################################################
-	.type	gdbstub_purge_cache,@function
-ENTRY(gdbstub_purge_cache)
-	#######################################################################
-	# read the addresses tagged in the cache's tag RAM and attempt to flush
-	# those addresses specifically
-	# - we rely on the hardware to filter out invalid tag entry addresses
-	mov	DCACHE_TAG(0,0),a0		# dcache tag RAM access address
-	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1  # total number of entries
-
-mn10300_dcache_flush_loop:
-	mov	(a0),d0
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
-	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
-						# cache
-	mov	d0,(a1)				# conditional purge
-
-mn10300_dcache_flush_skip:
-	add	L1_CACHE_BYTES,a0
-	add	L1_CACHE_BYTES,a1
-	add	-1,d1
-	bne	mn10300_dcache_flush_loop
-
-;; 	# unconditionally flush and invalidate the dcache
-;; 	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
-;; 	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1	# total number of
-;;							# entries
-;;
-;; gdbstub_purge_cache__dcache_loop:
-;; 	mov	(a1),d0				# unconditional purge
-;;
-;; 	add	L1_CACHE_BYTES,a1
-;; 	add	-1,d1
-;; 	bne	gdbstub_purge_cache__dcache_loop
-
-	#######################################################################
-	# now invalidate the icache
-	mov	CHCTR,a0
-	movhu	(a0),a1
-
-	mov	epsw,d1
-	and	~EPSW_IE,epsw
-	nop
-	nop
-
-	# disable the icache
-	and	~CHCTR_ICEN,d0
-	movhu	d0,(a0)
-
-	# and wait for it to calm down
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# invalidate
-	or	CHCTR_ICINV,d0
-	movhu	d0,(a0)
-
-	# wait for the cache to finish
-	mov	CHCTR,a0
-	setlb
-	movhu	(a0),d0
-	btst	CHCTR_ICBUSY,d0
-	lne
-
-	# and reenable it
-	movhu	a1,(a0)
-	movhu	(a0),d0			# read back to flush
-					# (SIGILLs all over without this)
-
-	mov	d1,epsw
-
-	ret	[],0
-
-	.size	gdbstub_purge_cache,.-gdbstub_purge_cache

arch/mn10300/kernel/gdb-stub.c

@@ -133,7 +133,7 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/exceptions.h>
-#include <asm/cacheflush.h>
+#include <asm/debugger.h>
 #include <asm/serial-regs.h>
 #include <asm/busctl-regs.h>
 #include <unit/leds.h>
@@ -1665,7 +1665,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * NB: We flush both caches, just to be sure...
 	 */
 	if (gdbstub_flush_caches)
-		gdbstub_purge_cache();
+		debugger_local_cache_flushinv();
 
 	gdbstub_load_fpu();
 	mn10300_set_gdbleds(0);

arch/mn10300/mm/Kconfig.cache

@@ -99,3 +99,49 @@ config MN10300_CACHE_INV_ICACHE
 	help
 	  Set if we need the icache to be invalidated, even if the dcache is in
 	  write-through mode and doesn't need flushing.
+
+#
+# The kernel debugger gets its own separate cache flushing functions
+#
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WBACK && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_TAG
+	help
+	  Set if the debugger needs to flush the dcache and invalidate the
+	  icache using the cache tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_FLUSH_BY_REG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WBACK && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_REG
+	help
+	  Set if the debugger needs to flush the dcache and invalidate the
+	  icache using automatic purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_TAG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WTHRU && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_TAG
+	help
+	  Set if the debugger needs to invalidate the icache using the cache
+	  tag registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_INV_BY_REG
+	def_bool y if KERNEL_DEBUGGER && \
+			MN10300_CACHE_WTHRU && \
+			!MN10300_CACHE_SNOOP && \
+			MN10300_CACHE_MANAGE_BY_REG
+	help
+	  Set if the debugger needs to invalidate the icache using automatic
+	  purge registers to make breakpoints work.
+
+config MN10300_DEBUGGER_CACHE_NO_FLUSH
+	def_bool y if KERNEL_DEBUGGER && \
+			(MN10300_CACHE_DISABLED || MN10300_CACHE_SNOOP)
+	help
+	  Set if the debugger does not need to flush the dcache and/or
+	  invalidate the icache to make breakpoints work.

arch/mn10300/mm/Makefile

@@ -13,6 +13,15 @@ cacheflush-$(CONFIG_MN10300_CACHE_INV_BY_REG) += cache-inv-by-reg.o
 cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_TAG) += cache-flush-by-tag.o
 cacheflush-$(CONFIG_MN10300_CACHE_FLUSH_BY_REG) += cache-flush-by-reg.o
 
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_TAG) += \
+	cache-dbg-flush-by-tag.o cache-dbg-inv-by-tag.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_FLUSH_BY_REG) += \
+	cache-dbg-flush-by-reg.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG) += \
+	cache-dbg-inv-by-tag.o cache-dbg-inv.o
+cacheflush-$(CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_REG) += \
+	cache-dbg-inv-by-reg.o cache-dbg-inv.o
+
 cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
 
 obj-y := \

arch/mn10300/mm/cache-dbg-flush-by-reg.S

+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# firstly flush the dcache
+	#
+	movhu	(CHCTR),d0
+	btst	CHCTR_DCEN|CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	mov	DCPGCR,a0
+
+	mov	epsw,d1
+	and	~EPSW_IE,epsw
+	or	EPSW_NMID,epsw
+	nop
+
+	btst	CHCTR_DCEN,d0
+	beq	debugger_local_cache_flushinv_no_dcache
+
+	# wait for busy bit of area purge
+	setlb
+	mov	(a0),d0
+	btst	DCPGCR_DCPGBSY,d0
+	lne
+
+	# set mask
+	clr	d0
+	mov	d0,(DCPGMR)
+
+	# area purge
+	#
+	# DCPGCR = DCPGCR_DCP
+	#
+	mov	DCPGCR_DCP,d0
+	mov	d0,(a0)
+
+	# wait for busy bit of area purge
+	setlb
+	mov	(a0),d0
+	btst	DCPGCR_DCPGBSY,d0
+	lne
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# secondly, invalidate the icache if it is enabled
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_done
+
+	invalidate_icache 0
+
+debugger_local_cache_flushinv_done:
+	mov	d1,epsw
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	movhu	(CHCTR),d1
+	btst	CHCTR_DCEN|CHCTR_ICEN,d1
+	beq	debugger_local_cache_flushinv_one_end
+	btst	CHCTR_DCEN,d1
+	beq	debugger_local_cache_flushinv_one_no_dcache
+
+	# round cacheline addr down
+	and	L1_CACHE_TAG_MASK,d0
+	mov	d0,a1
+	mov	d0,d1
+
+	# determine the dcache purge control reg address
+	mov	DCACHE_PURGE(0,0),a0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0
+
+	# retain valid entries in the cache
+	or	L1_CACHE_TAG_VALID,d1
+
+	# conditionally purge this line in all ways
+	mov	d1,(L1_CACHE_WAYDISP*0,a0)
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# now try to flush the icache
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	mn10300_local_icache_inv_range_reg_end
+
+	LOCAL_CLI_SAVE(d1)
+
+	mov	ICIVCR,a0
+
+	# wait for the invalidator to quiesce
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	# set the mask
+	mov	L1_CACHE_TAG_MASK,d0
+	mov	d0,(ICIVMR)
+
+	# invalidate the cache line at the given address
+	or	ICIVCR_ICI,a1
+	mov	a1,(a0)
+
+	# wait for the invalidator to quiesce again
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	LOCAL_IRQ_RESTORE(d1)
+
+debugger_local_cache_flushinv_one_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one

arch/mn10300/mm/cache-dbg-flush-by-tag.S

+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Flush the entire data cache back to RAM and invalidate the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# firstly flush the dcache
+	#
+	movhu	(CHCTR),d0
+	btst	CHCTR_DCEN|CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	btst	CHCTR_DCEN,d0
+	beq	debugger_local_cache_flushinv_no_dcache
+
+	# read the addresses tagged in the cache's tag RAM and attempt to flush
+	# those addresses specifically
+	# - we rely on the hardware to filter out invalid tag entry addresses
+	mov	DCACHE_TAG(0,0),a0		# dcache tag RAM access address
+	mov	DCACHE_PURGE(0,0),a1		# dcache purge request address
+	mov	L1_CACHE_NWAYS*L1_CACHE_NENTRIES,e0  # total number of entries
+
+mn10300_local_dcache_flush_loop:
+	mov	(a0),d0
+	and	L1_CACHE_TAG_MASK,d0
+	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
+						# cache
+	mov	d0,(a1)				# conditional purge
+
+	add	L1_CACHE_BYTES,a0
+	add	L1_CACHE_BYTES,a1
+	add	-1,e0
+	bne	mn10300_local_dcache_flush_loop
+
+debugger_local_cache_flushinv_no_dcache:
+	#
+	# secondly, invalidate the icache if it is enabled
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	movhu	(CHCTR),d1
+	btst	CHCTR_DCEN|CHCTR_ICEN,d1
+	beq	debugger_local_cache_flushinv_one_end
+	btst	CHCTR_DCEN,d1
+	beq	debugger_local_cache_flushinv_one_icache
+
+	# round cacheline addr down
+	and	L1_CACHE_TAG_MASK,d0
+	mov	d0,a1
+
+	# determine the dcache purge control reg address
+	mov	DCACHE_PURGE(0,0),a0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0
+
+	# retain valid entries in the cache
+	or	L1_CACHE_TAG_VALID,a1
+
+	# conditionally purge this line in all ways
+	mov	a1,(L1_CACHE_WAYDISP*0,a0)
+
+	# now go and do the icache
+	bra	debugger_local_cache_flushinv_one_icache
+
+debugger_local_cache_flushinv_one_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one

arch/mn10300/mm/cache-dbg-inv-by-reg.S

+/* MN10300 CPU cache invalidation routines, using automatic purge registers
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv_one
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one:
+	mov	d0,a1
+
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	mn10300_local_icache_inv_range_reg_end
+
+	LOCAL_CLI_SAVE(d1)
+
+	mov	ICIVCR,a0
+
+	# wait for the invalidator to quiesce
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	# set the mask
+	mov	~L1_CACHE_TAG_MASK,d0
+	mov	d0,(ICIVMR)
+
+	# invalidate the cache line at the given address
+	and	~L1_CACHE_TAG_MASK,a1
+	or	ICIVCR_ICI,a1
+	mov	a1,(a0)
+
+	# wait for the invalidator to quiesce again
+	setlb
+	mov	(a0),d0
+	btst	ICIVCR_ICIVBSY,d0
+	lne
+
+	LOCAL_IRQ_RESTORE(d1)
+
+mn10300_local_icache_inv_range_reg_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv_one,.-debugger_local_cache_flushinv_one

arch/mn10300/mm/cache-dbg-inv-by-tag.S

+/* MN10300 CPU cache invalidation routines, using direct tag flushing
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv_one_icache
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv_one(u8 *addr)
+#
+# Invalidate one particular cacheline if it's in the icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv_one_icache
+	.type	debugger_local_cache_flushinv_one_icache,@function
+debugger_local_cache_flushinv_one_icache:
+	movm	[d3,a2],(sp)
+
+	mov	CHCTR,a2
+	movhu	(a2),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_one_icache_end
+
+	mov	d0,a1
+	and	L1_CACHE_TAG_MASK,a1
+
+	# read the tags from the tag RAM, and if they indicate a matching valid
+	# cache line then we invalidate that line
+	mov	ICACHE_TAG(0,0),a0
+	mov	a1,d0
+	and	L1_CACHE_TAG_ENTRY,d0
+	add	d0,a0				# starting icache tag RAM
+						# access address
+
+	and	~(L1_CACHE_DISPARITY-1),a1	# determine comparator base
+	or	L1_CACHE_TAG_VALID,a1
+	mov	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_VALID,d1
+
+	LOCAL_CLI_SAVE(d3)
+
+	# disable the icache
+	movhu	(a2),d0
+	and	~CHCTR_ICEN,d0
+	movhu	d0,(a2)
+
+	# and wait for it to calm down
+	setlb
+	movhu	(a2),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# check all the way tags for this cache entry
+	mov	(a0),d0				# read the tag in the way 0 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 1 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 2 slot
+	xor	a1,d0
+	and	d1,d0
+	beq	debugger_local_icache_kill	# jump if matched
+
+	add	L1_CACHE_WAYDISP,a0
+	mov	(a0),d0				# read the tag in the way 3 slot
+	xor	a1,d0
+	and	d1,d0
+	bne	debugger_local_icache_finish	# jump if not matched
+
+debugger_local_icache_kill:
+	mov	d0,(a0)				# kill the tag (D0 is 0 at this point)
+
+debugger_local_icache_finish:
+	# wait for the cache to finish what it's doing
+	setlb
+	movhu	(a2),d0
+	btst	CHCTR_ICBUSY,d0
+	lne
+
+	# and reenable it
+	or	CHCTR_ICEN,d0
+	movhu	d0,(a2)
+	movhu	(a2),d0
+
+	# re-enable interrupts
+	LOCAL_IRQ_RESTORE(d3)
+
+debugger_local_cache_flushinv_one_icache_end:
+	ret	[d3,a2],8
+	.size	debugger_local_cache_flushinv_one_icache,.-debugger_local_cache_flushinv_one_icache
+
+#ifdef CONFIG_MN10300_DEBUGGER_CACHE_INV_BY_TAG
+	.globl	debugger_local_cache_flushinv_one
+	.type	debugger_local_cache_flushinv_one,@function
+debugger_local_cache_flushinv_one = debugger_local_cache_flushinv_one_icache
+#endif

arch/mn10300/mm/cache-dbg-inv.S

+/* MN10300 CPU cache invalidation routines
+ *
+ * Copyright (C) 2011 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/irqflags.h>
+#include <asm/cacheflush.h>
+#include "cache.inc"
+
+	.am33_2
+
+	.globl	debugger_local_cache_flushinv
+
+###############################################################################
+#
+# void debugger_local_cache_flushinv(void)
+#
+# Invalidate the entire icache
+#
+###############################################################################
+	ALIGN
+	.globl	debugger_local_cache_flushinv
+        .type	debugger_local_cache_flushinv,@function
+debugger_local_cache_flushinv:
+	#
+	# we only need to invalidate the icache in this cache mode
+	#
+	mov	CHCTR,a0
+	movhu	(a0),d0
+	btst	CHCTR_ICEN,d0
+	beq	debugger_local_cache_flushinv_end
+
+	invalidate_icache 1
+
+debugger_local_cache_flushinv_end:
+	ret	[],0
+	.size	debugger_local_cache_flushinv,.-debugger_local_cache_flushinv

arch/mn10300/mm/cache-flush-by-tag.S

@@ -62,7 +62,7 @@ mn10300_local_dcache_flush:
 
 mn10300_local_dcache_flush_loop:
 	mov	(a0),d0
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+	and	L1_CACHE_TAG_MASK,d0
 	or	L1_CACHE_TAG_VALID,d0		# retain valid entries in the
 						# cache
 	mov	d0,(a1)				# conditional purge
@@ -112,11 +112,11 @@ mn10300_local_dcache_flush_range:
 1:
 
 	# round start addr down
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+	and	L1_CACHE_TAG_MASK,d0
 	mov	d0,a1
 
 	add	L1_CACHE_BYTES,d1			# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	and	L1_CACHE_TAG_MASK,d1
 
 	# write a request to flush all instances of an address from the cache
 	mov	DCACHE_PURGE(0,0),a0
@@ -215,12 +215,11 @@ mn10300_local_dcache_flush_inv_range:
 	bra	mn10300_local_dcache_flush_inv
 1:
 
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0		# round start addr down
 	mov	d0,a1
 
 	add	L1_CACHE_BYTES,d1		# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	and	L1_CACHE_TAG_MASK,d1
 
 	# write a request to flush and invalidate all instances of an address
 	# from the cache

arch/mn10300/mm/cache-inv-by-reg.S

@@ -116,9 +116,9 @@ mn10300_local_dcache_inv_range:
 	# and if they're not cacheline-aligned, we must flush any bits outside
 	# the range that share cachelines with stuff inside the range
 #ifdef CONFIG_MN10300_CACHE_WBACK
-	btst	~(L1_CACHE_BYTES-1),d0
+	btst	~L1_CACHE_TAG_MASK,d0
 	bne	1f
-	btst	~(L1_CACHE_BYTES-1),d1
+	btst	~L1_CACHE_TAG_MASK,d1
 	beq	2f
 1:
 	bra	mn10300_local_dcache_flush_inv_range
@@ -136,12 +136,11 @@ mn10300_local_dcache_inv_range:
 	# writeback mode, in which case we would be in flush and invalidate by
 	# now
 #ifndef CONFIG_MN10300_CACHE_WBACK
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0	# round start addr down
 
 	mov	L1_CACHE_BYTES-1,d2
 	add	d2,d1
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1	# round end addr up
+	and	L1_CACHE_TAG_MASK,d1	# round end addr up
 #endif /* !CONFIG_MN10300_CACHE_WBACK */
 
 	sub	d0,d1,d2		# calculate the total size

arch/mn10300/mm/cache-inv-by-tag.S

@@ -124,9 +124,9 @@ mn10300_local_dcache_inv_range:
 	# and if they're not cacheline-aligned, we must flush any bits outside
 	# the range that share cachelines with stuff inside the range
 #ifdef CONFIG_MN10300_CACHE_WBACK
-	btst	~(L1_CACHE_BYTES-1),d0
+	btst	~L1_CACHE_TAG_MASK,d0
 	bne	1f
-	btst	~(L1_CACHE_BYTES-1),d1
+	btst	~L1_CACHE_TAG_MASK,d1
 	beq	2f
 1:
 	bra	mn10300_local_dcache_flush_inv_range
@@ -141,11 +141,10 @@ mn10300_local_dcache_inv_range:
 	beq	mn10300_local_dcache_inv_range_end
 
 #ifndef CONFIG_MN10300_CACHE_WBACK
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0	# round start
-								# addr down
+	and	L1_CACHE_TAG_MASK,d0		# round start addr down
 
 	add	L1_CACHE_BYTES,d1		# round end addr up
-	and	L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+	and	L1_CACHE_TAG_MASK,d1
 #endif /* !CONFIG_MN10300_CACHE_WBACK */
 	mov	d0,a1
 

arch/mn10300/proc-mn103e010/include/proc/cache.h

@@ -23,6 +23,7 @@
 #define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
 #define L1_CACHE_TAG_ENTRY	0x00000ff0	/* cache tag entry address mask */
 #define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+#define L1_CACHE_TAG_MASK	+(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
 
 /*
  * specification of the interval between interrupt checking intervals whilst

arch/mn10300/proc-mn2ws0050/include/proc/cache.h

@@ -29,6 +29,7 @@
 #define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
 #define L1_CACHE_TAG_ENTRY	0x00000fe0	/* cache tag entry address mask */
 #define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+#define L1_CACHE_TAG_MASK	+(L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY)
 
 /*
  * specification of the interval between interrupt checking intervals whilst