From 7e8b15dbc392cf3097f2d2e6dfbbf2e97318c553 Mon Sep 17 00:00:00 2001 From: Joseph Lo Date: Fri, 19 Jul 2013 17:25:24 +0800 Subject: [PATCH] ARM: tegra114: Reprogram GIC CPU interface to bypass IRQ on CPU PM entry There is a difference between GICv1 and v2 when CPU in power management mode (aka CPU power down on Tegra). For GICv1, IRQ/FIQ interrupt lines going to CPU are same lines which are also used for wake-interrupt. Therefore, we cannot disable the GIC CPU interface if we need to use same interrupts for CPU wake purpose. This creates a race condition for CPU power off entry. Also, in GICv1, disabling GICv1 CPU interface puts GICv1 into bypass mode such that incoming legacy IRQ/FIQ are sent to CPU, which means disabling GIC CPU interface doesn't really disable IRQ/FIQ to CPU. GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not disabled by GIC CPU interface. This is done by adding a bypass override capability when the interrupts are disabled at the CPU interface. To support this, there are four bits about IRQ/FIQ BypassDisable in CPU interface Control Register. When the IRQ/FIQ not being driver by the CPU interface, each interrupt output signal can be deasserted rather than being driven by the legacy interrupt input. So the wake-event can be used as wakeup signals to SoC (system power controller). To prevent race conditions and ensure proper interrupt routing on Cortex-A15 CPUs when they are power-gated, add a CPU PM notifier call-back to reprogram the GIC CPU interface on PM entry. The GIC CPU interface will be reset back to its normal state by the common GIC CPU PM exit callback when the CPU wakes up. Based on the work by: Scott Williams Signed-off-by: Joseph Lo Signed-off-by: Stephen Warren --- arch/arm/mach-tegra/irq.c | 40 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 0de4eed1493d..1a74d562dca1 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,10 +18,12 @@ */ #include +#include #include #include #include #include +#include #include #include @@ -65,6 +67,7 @@ static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +static void __iomem *tegra_gic_cpu_base; #endif bool tegra_pending_sgi(void) @@ -213,8 +216,43 @@ int tegra_legacy_irq_syscore_init(void) return 0; } + +static int tegra_gic_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_PM_ENTER: + writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block tegra_gic_notifier_block = { + .notifier_call = tegra_gic_notifier, +}; + +static const struct of_device_id tegra114_dt_gic_match[] __initconst = { + { .compatible = "arm,cortex-a15-gic" }, + { } +}; + +static void tegra114_gic_cpu_pm_registration(void) +{ + struct device_node *dn; + + dn = of_find_matching_node(NULL, tegra114_dt_gic_match); + if (!dn) + return; + + tegra_gic_cpu_base = of_iomap(dn, 1); + + cpu_pm_register_notifier(&tegra_gic_notifier_block); +} #else #define tegra_set_wake NULL +static void tegra114_gic_cpu_pm_registration(void) { } #endif void __init tegra_init_irq(void) @@ -252,4 +290,6 @@ void __init tegra_init_irq(void) if (!of_have_populated_dt()) gic_init(0, 29, distbase, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + + tegra114_gic_cpu_pm_registration(); } -- GitLab