Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 7e5b2db7 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus 

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...
上级 227d1e43 c819baf3
展开全部 显示空白变更内容
内联 并排
Showing with 4510 addition and 3522 deletion
Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt 0 → 100644
浏览文件 @ 7e5b2db7
Lantiq SoC External Bus memory mapped GPIO controller
By attaching hardware latches to the EBU it is possible to create output
only gpios. This driver configures a special memory address, which when
written to outputs 16 bit to the latches.
The node describing the memory mapped GPIOs needs to be a child of the node
describing the "lantiq,localbus".
Required properties:
- compatible : Should be "lantiq,gpio-mm-lantiq"
- reg : Address and length of the register set for the device
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- gpio-controller : Marks the device node as a gpio controller.
Optional properties:
- lantiq,shadow : The default value that we shall assume as already set on the
shift register cascade.
Example:
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
gpio_mm0: gpio@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
gpio-controller;
#gpio-cells = <2>;
lantiq,shadow = <0x77f>
};
}
Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt 0 → 100644
浏览文件 @ 7e5b2db7
Lantiq SoC Serial To Parallel (STP) GPIO controller
The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
peripheral controller used to drive external shift register cascades. At most
3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
to drive the 2 LSBs of the cascade automatically.
Required properties:
- compatible : Should be "lantiq,gpio-stp-xway"
- reg : Address and length of the register set for the device
- #gpio-cells : Should be two. The first cell is the pin number and
the second cell is used to specify optional parameters (currently
unused).
- gpio-controller : Marks the device node as a gpio controller.
Optional properties:
- lantiq,shadow : The default value that we shall assume as already set on the
shift register cascade.
- lantiq,groups : Set the 3 bit mask to select which of the 3 groups are enabled
in the shift register cascade.
- lantiq,dsl : The dsl core can control the 2 LSBs of the gpio cascade. This 2 bit
property can enable this feature.
- lantiq,phy1 : The gphy1 core can control 3 bits of the gpio cascade.
- lantiq,phy2 : The gphy2 core can control 3 bits of the gpio cascade.
- lantiq,rising : use rising instead of falling edge for the shift register
Example:
gpio1: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
reg = <0xE100BB0 0x40>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0xffff>;
lantiq,groups = <0x7>;
lantiq,dsl = <0x3>;
lantiq,phy1 = <0x7>;
lantiq,phy2 = <0x7>;
/* lantiq,rising; */
};
arch/mips/Kconfig
浏览文件 @ 7e5b2db7
......@@ -233,8 +233,9 @@ config LANTIQ
select ARCH_REQUIRE_GPIOLIB
select SWAP_IO_SPACE
select BOOT_RAW
select HAVE_CLK
select MIPS_MACHINE
select HAVE_MACH_CLKDEV
select CLKDEV_LOOKUP
select USE_OF
config LASAT
bool "LASAT Networks platforms"
......@@ -1783,10 +1784,12 @@ endchoice
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
range 14 64 if HUGETLB_PAGE && PAGE_SIZE_64KB
default "14" if HUGETLB_PAGE && PAGE_SIZE_64KB
range 13 64 if HUGETLB_PAGE && PAGE_SIZE_32KB
default "13" if HUGETLB_PAGE && PAGE_SIZE_32KB
range 12 64 if HUGETLB_PAGE && PAGE_SIZE_16KB
default "12" if HUGETLB_PAGE && PAGE_SIZE_16KB
range 11 64
default "11"
help
......
arch/mips/alchemy/devboards/db1200.c
浏览文件 @ 7e5b2db7
......@@ -22,6 +22,7 @@
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/leds.h>
......
arch/mips/ath79/Kconfig
浏览文件 @ 7e5b2db7
......@@ -26,6 +26,18 @@ config ATH79_MACH_AP81
Say 'Y' here if you want your kernel to support the
Atheros AP81 reference board.
config ATH79_MACH_DB120
bool "Atheros DB120 reference board"
select SOC_AR934X
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_SPI
select ATH79_DEV_USB
select ATH79_DEV_WMAC
help
Say 'Y' here if you want your kernel to support the
Atheros DB120 reference board.
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
......@@ -52,12 +64,14 @@ endmenu
config SOC_AR71XX
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select HW_HAS_PCI
def_bool n
config SOC_AR724X
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select HW_HAS_PCI
select PCI_AR724X if PCI
def_bool n
config SOC_AR913X
......@@ -68,6 +82,15 @@ config SOC_AR933X
select USB_ARCH_HAS_EHCI
def_bool n
config SOC_AR934X
select USB_ARCH_HAS_EHCI
select HW_HAS_PCI
select PCI_AR724X if PCI
def_bool n
config PCI_AR724X
def_bool n
config ATH79_DEV_GPIO_BUTTONS
def_bool n
......@@ -81,7 +104,7 @@ config ATH79_DEV_USB
def_bool n
config ATH79_DEV_WMAC
depends on (SOC_AR913X || SOC_AR933X)
depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X)
def_bool n
endif
arch/mips/ath79/Makefile
浏览文件 @ 7e5b2db7
......@@ -11,6 +11,7 @@
obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_PCI) += pci.o
#
# Devices
......@@ -27,5 +28,6 @@ obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
#
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
arch/mips/ath79/clock.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
......@@ -163,6 +166,82 @@ static void __init ar933x_clocks_init(void)
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
static void __init ar934x_clocks_init(void)
{
u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
u32 cpu_pll, ddr_pll;
u32 bootstrap;
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
ath79_ref_clk.rate = 40 * 1000 * 1000;
else
ath79_ref_clk.rate = 25 * 1000 * 1000;
pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
AR934X_PLL_CPU_CONFIG_NINT_MASK;
frac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
cpu_pll = nint * ath79_ref_clk.rate / ref_div;
cpu_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 6));
cpu_pll /= (1 << out_div);
pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
AR934X_PLL_DDR_CONFIG_NINT_MASK;
frac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
ddr_pll = nint * ath79_ref_clk.rate / ref_div;
ddr_pll += frac * ath79_ref_clk.rate / (ref_div * (2 << 10));
ddr_pll /= (1 << out_div);
clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
ath79_cpu_clk.rate = ath79_ref_clk.rate;
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
ath79_cpu_clk.rate = cpu_pll / (postdiv + 1);
else
ath79_cpu_clk.rate = ddr_pll / (postdiv + 1);
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
ath79_ddr_clk.rate = ath79_ref_clk.rate;
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
ath79_ddr_clk.rate = ddr_pll / (postdiv + 1);
else
ath79_ddr_clk.rate = cpu_pll / (postdiv + 1);
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
ath79_ahb_clk.rate = ath79_ref_clk.rate;
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
ath79_ahb_clk.rate = ddr_pll / (postdiv + 1);
else
ath79_ahb_clk.rate = cpu_pll / (postdiv + 1);
ath79_wdt_clk.rate = ath79_ref_clk.rate;
ath79_uart_clk.rate = ath79_ref_clk.rate;
}
void __init ath79_clocks_init(void)
{
if (soc_is_ar71xx())
......@@ -173,6 +252,8 @@ void __init ath79_clocks_init(void)
ar913x_clocks_init();
else if (soc_is_ar933x())
ar933x_clocks_init();
else if (soc_is_ar934x())
ar934x_clocks_init();
else
BUG();
......
arch/mips/ath79/common.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X/AR913X common routines
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
......@@ -67,6 +70,8 @@ void ath79_device_reset_set(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
else if (soc_is_ar934x())
reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();
......@@ -91,6 +96,8 @@ void ath79_device_reset_clear(u32 mask)
reg = AR913X_RESET_REG_RESET_MODULE;
else if (soc_is_ar933x())
reg = AR933X_RESET_REG_RESET_MODULE;
else if (soc_is_ar934x())
reg = AR934X_RESET_REG_RESET_MODULE;
else
BUG();
......
arch/mips/ath79/dev-common.c
浏览文件 @ 7e5b2db7
......@@ -89,7 +89,8 @@ void __init ath79_register_uart(void)
if (soc_is_ar71xx() ||
soc_is_ar724x() ||
soc_is_ar913x()) {
soc_is_ar913x() ||
soc_is_ar934x()) {
ath79_uart_data[0].uartclk = clk_get_rate(clk);
platform_device_register(&ath79_uart_device);
} else if (soc_is_ar933x()) {
......
arch/mips/ath79/dev-gpio-buttons.c
浏览文件 @ 7e5b2db7
......@@ -25,12 +25,10 @@ void __init ath79_register_gpio_keys_polled(int id,
struct gpio_keys_button *p;
int err;
p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
if (!p)
return;
memcpy(p, buttons, nbuttons * sizeof(*p));
pdev = platform_device_alloc("gpio-keys-polled", id);
if (!pdev)
goto err_free_buttons;
......
arch/mips/ath79/dev-leds-gpio.c
浏览文件 @ 7e5b2db7
......@@ -24,12 +24,10 @@ void __init ath79_register_leds_gpio(int id,
struct gpio_led *p;
int err;
p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
if (!p)
return;
memcpy(p, leds, num_leds * sizeof(*p));
pdev = platform_device_alloc("leds-gpio", id);
if (!pdev)
goto err_free_leds;
......
arch/mips/ath79/dev-wmac.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR913X/AR933X SoC built-in WMAC device support
*
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
......@@ -26,8 +29,7 @@ static struct resource ath79_wmac_resources[] = {
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_MEM,
}, {
.start = ATH79_CPU_IRQ_IP2,
.end = ATH79_CPU_IRQ_IP2,
/* .start and .end fields are filled dynamically */
.flags = IORESOURCE_IRQ,
},
};
......@@ -53,6 +55,8 @@ static void __init ar913x_wmac_setup(void)
ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
}
......@@ -79,6 +83,8 @@ static void __init ar933x_wmac_setup(void)
ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
ath79_wmac_resources[1].start = ATH79_CPU_IRQ_IP2;
ath79_wmac_resources[1].end = ATH79_CPU_IRQ_IP2;
t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
if (t & AR933X_BOOTSTRAP_REF_CLK_40)
......@@ -92,12 +98,32 @@ static void __init ar933x_wmac_setup(void)
ath79_wmac_data.external_reset = ar933x_wmac_reset;
}
static void ar934x_wmac_setup(void)
{
u32 t;
ath79_wmac_device.name = "ar934x_wmac";
ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (t & AR934X_BOOTSTRAP_REF_CLK_40)
ath79_wmac_data.is_clk_25mhz = false;
else
ath79_wmac_data.is_clk_25mhz = true;
}
void __init ath79_register_wmac(u8 *cal_data)
{
if (soc_is_ar913x())
ar913x_wmac_setup();
else if (soc_is_ar933x())
ar933x_wmac_setup();
else if (soc_is_ar934x())
ar934x_wmac_setup();
else
BUG();
......
arch/mips/ath79/early_printk.c
浏览文件 @ 7e5b2db7
......@@ -71,6 +71,9 @@ static void prom_putchar_init(void)
case REV_ID_MAJOR_AR7241:
case REV_ID_MAJOR_AR7242:
case REV_ID_MAJOR_AR913X:
case REV_ID_MAJOR_AR9341:
case REV_ID_MAJOR_AR9342:
case REV_ID_MAJOR_AR9344:
_prom_putchar = prom_putchar_ar71xx;
break;
......
arch/mips/ath79/gpio.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X/AR913X GPIO API support
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
......@@ -89,6 +92,42 @@ static int ath79_gpio_direction_output(struct gpio_chip *chip,
return 0;
}
static int ar934x_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = ath79_gpio_base;
unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags);
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
base + AR71XX_GPIO_REG_OE);
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
return 0;
}
static int ar934x_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
void __iomem *base = ath79_gpio_base;
unsigned long flags;
spin_lock_irqsave(&ath79_gpio_lock, flags);
if (value)
__raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
else
__raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
base + AR71XX_GPIO_REG_OE);
spin_unlock_irqrestore(&ath79_gpio_lock, flags);
return 0;
}
static struct gpio_chip ath79_gpio_chip = {
.label = "ath79",
.get = ath79_gpio_get_value,
......@@ -155,11 +194,17 @@ void __init ath79_gpio_init(void)
ath79_gpio_count = AR913X_GPIO_COUNT;
else if (soc_is_ar933x())
ath79_gpio_count = AR933X_GPIO_COUNT;
else if (soc_is_ar934x())
ath79_gpio_count = AR934X_GPIO_COUNT;
else
BUG();
ath79_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
ath79_gpio_chip.ngpio = ath79_gpio_count;
if (soc_is_ar934x()) {
ath79_gpio_chip.direction_input = ar934x_gpio_direction_input;
ath79_gpio_chip.direction_output = ar934x_gpio_direction_output;
}
err = gpiochip_add(&ath79_gpio_chip);
if (err)
......
arch/mips/ath79/irq.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR71xx/AR724x/AR913x specific interrupt handling
*
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
......@@ -23,8 +24,8 @@
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
static unsigned int ath79_ip2_flush_reg;
static unsigned int ath79_ip3_flush_reg;
static void (*ath79_ip2_handler)(void);
static void (*ath79_ip3_handler)(void);
static void ath79_misc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
......@@ -129,7 +130,7 @@ static void __init ath79_misc_irq_init(void)
if (soc_is_ar71xx() || soc_is_ar913x())
ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
else if (soc_is_ar724x() || soc_is_ar933x())
else if (soc_is_ar724x() || soc_is_ar933x() || soc_is_ar934x())
ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
else
BUG();
......@@ -143,6 +144,39 @@ static void __init ath79_misc_irq_init(void)
irq_set_chained_handler(ATH79_CPU_IRQ_MISC, ath79_misc_irq_handler);
}
static void ar934x_ip2_irq_dispatch(unsigned int irq, struct irq_desc *desc)
{
u32 status;
disable_irq_nosync(irq);
status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_PCIE);
generic_handle_irq(ATH79_IP2_IRQ(0));
} else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_WMAC);
generic_handle_irq(ATH79_IP2_IRQ(1));
} else {
spurious_interrupt();
}
enable_irq(irq);
}
static void ar934x_ip2_irq_init(void)
{
int i;
for (i = ATH79_IP2_IRQ_BASE;
i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
irq_set_chip_and_handler(i, &dummy_irq_chip,
handle_level_irq);
irq_set_chained_handler(ATH79_CPU_IRQ_IP2, ar934x_ip2_irq_dispatch);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned long pending;
......@@ -152,10 +186,8 @@ asmlinkage void plat_irq_dispatch(void)
if (pending & STATUSF_IP7)
do_IRQ(ATH79_CPU_IRQ_TIMER);
else if (pending & STATUSF_IP2) {
ath79_ddr_wb_flush(ath79_ip2_flush_reg);
do_IRQ(ATH79_CPU_IRQ_IP2);
}
else if (pending & STATUSF_IP2)
ath79_ip2_handler();
else if (pending & STATUSF_IP4)
do_IRQ(ATH79_CPU_IRQ_GE0);
......@@ -163,10 +195,8 @@ asmlinkage void plat_irq_dispatch(void)
else if (pending & STATUSF_IP5)
do_IRQ(ATH79_CPU_IRQ_GE1);
else if (pending & STATUSF_IP3) {
ath79_ddr_wb_flush(ath79_ip3_flush_reg);
do_IRQ(ATH79_CPU_IRQ_USB);
}
else if (pending & STATUSF_IP3)
ath79_ip3_handler();
else if (pending & STATUSF_IP6)
do_IRQ(ATH79_CPU_IRQ_MISC);
......@@ -175,24 +205,97 @@ asmlinkage void plat_irq_dispatch(void)
spurious_interrupt();
}
/*
* The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
* these devices typically allocate coherent DMA memory, however the
* DMA controller may still have some unsynchronized data in the FIFO.
* Issue a flush in the handlers to ensure that the driver sees
* the update.
*/
static void ar71xx_ip2_handler(void)
{
ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_PCI);
do_IRQ(ATH79_CPU_IRQ_IP2);
}
static void ar724x_ip2_handler(void)
{
ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_PCIE);
do_IRQ(ATH79_CPU_IRQ_IP2);
}
static void ar913x_ip2_handler(void)
{
ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_WMAC);
do_IRQ(ATH79_CPU_IRQ_IP2);
}
static void ar933x_ip2_handler(void)
{
ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_WMAC);
do_IRQ(ATH79_CPU_IRQ_IP2);
}
static void ar934x_ip2_handler(void)
{
do_IRQ(ATH79_CPU_IRQ_IP2);
}
static void ar71xx_ip3_handler(void)
{
ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_USB);
do_IRQ(ATH79_CPU_IRQ_USB);
}
static void ar724x_ip3_handler(void)
{
ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_USB);
do_IRQ(ATH79_CPU_IRQ_USB);
}
static void ar913x_ip3_handler(void)
{
ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_USB);
do_IRQ(ATH79_CPU_IRQ_USB);
}
static void ar933x_ip3_handler(void)
{
ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_USB);
do_IRQ(ATH79_CPU_IRQ_USB);
}
static void ar934x_ip3_handler(void)
{
ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_USB);
do_IRQ(ATH79_CPU_IRQ_USB);
}
void __init arch_init_irq(void)
{
if (soc_is_ar71xx()) {
ath79_ip2_flush_reg = AR71XX_DDR_REG_FLUSH_PCI;
ath79_ip3_flush_reg = AR71XX_DDR_REG_FLUSH_USB;
ath79_ip2_handler = ar71xx_ip2_handler;
ath79_ip3_handler = ar71xx_ip3_handler;
} else if (soc_is_ar724x()) {
ath79_ip2_flush_reg = AR724X_DDR_REG_FLUSH_PCIE;
ath79_ip3_flush_reg = AR724X_DDR_REG_FLUSH_USB;
ath79_ip2_handler = ar724x_ip2_handler;
ath79_ip3_handler = ar724x_ip3_handler;
} else if (soc_is_ar913x()) {
ath79_ip2_flush_reg = AR913X_DDR_REG_FLUSH_WMAC;
ath79_ip3_flush_reg = AR913X_DDR_REG_FLUSH_USB;
ath79_ip2_handler = ar913x_ip2_handler;
ath79_ip3_handler = ar913x_ip3_handler;
} else if (soc_is_ar933x()) {
ath79_ip2_flush_reg = AR933X_DDR_REG_FLUSH_WMAC;
ath79_ip3_flush_reg = AR933X_DDR_REG_FLUSH_USB;
} else
ath79_ip2_handler = ar933x_ip2_handler;
ath79_ip3_handler = ar933x_ip3_handler;
} else if (soc_is_ar934x()) {
ath79_ip2_handler = ar934x_ip2_handler;
ath79_ip3_handler = ar934x_ip3_handler;
} else {
BUG();
}
cp0_perfcount_irq = ATH79_MISC_IRQ_PERFC;
mips_cpu_irq_init();
ath79_misc_irq_init();
if (soc_is_ar934x())
ar934x_ip2_irq_init();
}
arch/mips/ath79/mach-db120.c 0 → 100644
浏览文件 @ 7e5b2db7
/*
* Atheros DB120 reference board support
*
* Copyright (c) 2011 Qualcomm Atheros
* Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-wmac.h"
#include "pci.h"
#define DB120_GPIO_LED_WLAN_5G 12
#define DB120_GPIO_LED_WLAN_2G 13
#define DB120_GPIO_LED_STATUS 14
#define DB120_GPIO_LED_WPS 15
#define DB120_GPIO_BTN_WPS 16
#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
#define DB120_WMAC_CALDATA_OFFSET 0x1000
#define DB120_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led db120_leds_gpio[] __initdata = {
{
.name = "db120:green:status",
.gpio = DB120_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "db120:green:wps",
.gpio = DB120_GPIO_LED_WPS,
.active_low = 1,
},
{
.name = "db120:green:wlan-5g",
.gpio = DB120_GPIO_LED_WLAN_5G,
.active_low = 1,
},
{
.name = "db120:green:wlan-2g",
.gpio = DB120_GPIO_LED_WLAN_2G,
.active_low = 1,
},
};
static struct gpio_keys_button db120_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
.gpio = DB120_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct spi_board_info db120_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "s25sl064a",
}
};
static struct ath79_spi_platform_data db120_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
#ifdef CONFIG_PCI
static struct ath9k_platform_data db120_ath9k_data;
static int db120_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
case 0:
dev->dev.platform_data = &db120_ath9k_data;
break;
}
return 0;
}
static void __init db120_pci_init(u8 *eeprom)
{
memcpy(db120_ath9k_data.eeprom_data, eeprom,
sizeof(db120_ath9k_data.eeprom_data));
ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void db120_pci_init(void) {}
#endif /* CONFIG_PCI */
static void __init db120_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
db120_leds_gpio);
ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
ARRAY_SIZE(db120_gpio_keys),
db120_gpio_keys);
ath79_register_spi(&db120_spi_data, db120_spi_info,
ARRAY_SIZE(db120_spi_info));
ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
}
MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
db120_setup);
arch/mips/ath79/mach-pb44.c
浏览文件 @ 7e5b2db7
......@@ -19,6 +19,7 @@
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "pci.h"
#define PB44_GPIO_I2C_SCL 0
#define PB44_GPIO_I2C_SDA 1
......@@ -114,6 +115,7 @@ static void __init pb44_init(void)
ath79_register_spi(&pb44_spi_data, pb44_spi_info,
ARRAY_SIZE(pb44_spi_info));
ath79_register_usb();
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
......
arch/mips/ath79/mach-ubnt-xm.c
浏览文件 @ 7e5b2db7
......@@ -12,16 +12,15 @@
#include <linux/init.h>
#include <linux/pci.h>
#ifdef CONFIG_PCI
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/pci-ath724x.h>
#endif /* CONFIG_PCI */
#include <asm/mach-ath79/irq.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
......@@ -33,7 +32,6 @@
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
#define UBNT_XM_PCI_IRQ 48
#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
......@@ -84,12 +82,27 @@ static struct ath79_spi_platform_data ubnt_xm_spi_data = {
#ifdef CONFIG_PCI
static struct ath9k_platform_data ubnt_xm_eeprom_data;
static struct ath724x_pci_data ubnt_xm_pci_data[] = {
{
.irq = UBNT_XM_PCI_IRQ,
.pdata = &ubnt_xm_eeprom_data,
},
};
static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
case 0:
dev->dev.platform_data = &ubnt_xm_eeprom_data;
break;
}
return 0;
}
static void __init ubnt_xm_pci_init(void)
{
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void ubnt_xm_pci_init(void) {}
#endif /* CONFIG_PCI */
static void __init ubnt_xm_init(void)
......@@ -104,13 +117,7 @@ static void __init ubnt_xm_init(void)
ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
ARRAY_SIZE(ubnt_xm_spi_info));
#ifdef CONFIG_PCI
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
ath724x_pci_add_data(ubnt_xm_pci_data, ARRAY_SIZE(ubnt_xm_pci_data));
#endif /* CONFIG_PCI */
ubnt_xm_pci_init();
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
......
arch/mips/ath79/machtypes.h
浏览文件 @ 7e5b2db7
......@@ -18,6 +18,7 @@ enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
};
......
arch/mips/ath79/pci.c 0 → 100644
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X specific PCI setup code
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/pci.h>
#include "pci.h"
static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
static unsigned ath79_pci_nr_irqs __initdata;
static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
{
.slot = 17,
.pin = 1,
.irq = ATH79_PCI_IRQ(0),
}, {
.slot = 18,
.pin = 1,
.irq = ATH79_PCI_IRQ(1),
}, {
.slot = 19,
.pin = 1,
.irq = ATH79_PCI_IRQ(2),
}
};
static const struct ath79_pci_irq ar724x_pci_irq_map[] __initconst = {
{
.slot = 0,
.pin = 1,
.irq = ATH79_PCI_IRQ(0),
}
};
int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
{
int irq = -1;
int i;
if (ath79_pci_nr_irqs == 0 ||
ath79_pci_irq_map == NULL) {
if (soc_is_ar71xx()) {
ath79_pci_irq_map = ar71xx_pci_irq_map;
ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
} else if (soc_is_ar724x() ||
soc_is_ar9342() ||
soc_is_ar9344()) {
ath79_pci_irq_map = ar724x_pci_irq_map;
ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
} else {
pr_crit("pci %s: invalid irq map\n",
pci_name((struct pci_dev *) dev));
return irq;
}
}
for (i = 0; i < ath79_pci_nr_irqs; i++) {
const struct ath79_pci_irq *entry;
entry = &ath79_pci_irq_map[i];
if (entry->slot == slot && entry->pin == pin) {
irq = entry->irq;
break;
}
}
if (irq < 0)
pr_crit("pci %s: no irq found for pin %u\n",
pci_name((struct pci_dev *) dev), pin);
else
pr_info("pci %s: using irq %d for pin %u\n",
pci_name((struct pci_dev *) dev), irq, pin);
return irq;
}
int pcibios_plat_dev_init(struct pci_dev *dev)
{
if (ath79_pci_plat_dev_init)
return ath79_pci_plat_dev_init(dev);
return 0;
}
void __init ath79_pci_set_irq_map(unsigned nr_irqs,
const struct ath79_pci_irq *map)
{
ath79_pci_nr_irqs = nr_irqs;
ath79_pci_irq_map = map;
}
void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
{
ath79_pci_plat_dev_init = func;
}
int __init ath79_register_pci(void)
{
if (soc_is_ar71xx())
return ar71xx_pcibios_init();
if (soc_is_ar724x())
return ar724x_pcibios_init(ATH79_CPU_IRQ_IP2);
if (soc_is_ar9342() || soc_is_ar9344()) {
u32 bootstrap;
bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
if (bootstrap & AR934X_BOOTSTRAP_PCIE_RC)
return ar724x_pcibios_init(ATH79_IP2_IRQ(0));
}
return -ENODEV;
}
arch/mips/ath79/pci.h 0 → 100644
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X PCI support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef _ATH79_PCI_H
#define _ATH79_PCI_H
struct ath79_pci_irq {
u8 slot;
u8 pin;
int irq;
};
#ifdef CONFIG_PCI
void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
int ath79_register_pci(void);
#else
static inline void
ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
static inline void
ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
static inline int ath79_register_pci(void) { return 0; }
#endif
#endif /* _ATH79_PCI_H */
arch/mips/ath79/setup.c
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X/AR913X specific setup
*
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
......@@ -116,18 +117,6 @@ static void __init ath79_detect_sys_type(void)
rev = id & AR724X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9330:
ath79_soc = ATH79_SOC_AR9330;
chip = "9330";
rev = id & AR933X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9331:
ath79_soc = ATH79_SOC_AR9331;
chip = "9331";
rev = id & AR933X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR913X:
minor = id & AR913X_REV_ID_MINOR_MASK;
rev = id >> AR913X_REV_ID_REVISION_SHIFT;
......@@ -145,6 +134,36 @@ static void __init ath79_detect_sys_type(void)
}
break;
case REV_ID_MAJOR_AR9330:
ath79_soc = ATH79_SOC_AR9330;
chip = "9330";
rev = id & AR933X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9331:
ath79_soc = ATH79_SOC_AR9331;
chip = "9331";
rev = id & AR933X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9341:
ath79_soc = ATH79_SOC_AR9341;
chip = "9341";
rev = id & AR934X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9342:
ath79_soc = ATH79_SOC_AR9342;
chip = "9342";
rev = id & AR934X_REV_ID_REVISION_MASK;
break;
case REV_ID_MAJOR_AR9344:
ath79_soc = ATH79_SOC_AR9344;
chip = "9344";
rev = id & AR934X_REV_ID_REVISION_MASK;
break;
default:
panic("ath79: unknown SoC, id:0x%08x", id);
}
......
arch/mips/bcm63xx/boards/Makefile
浏览文件 @ 7e5b2db7
obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
ccflags-y := -Werror
arch/mips/cavium-octeon/setup.c
浏览文件 @ 7e5b2db7
......@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/serial.h>
......
arch/mips/cavium-octeon/smp.c
浏览文件 @ 7e5b2db7
......@@ -257,8 +257,6 @@ DEFINE_PER_CPU(int, cpu_state);
extern void fixup_irqs(void);
static DEFINE_SPINLOCK(smp_reserve_lock);
static int octeon_cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
......@@ -266,8 +264,6 @@ static int octeon_cpu_disable(void)
if (cpu == 0)
return -EBUSY;
spin_lock(&smp_reserve_lock);
set_cpu_online(cpu, false);
cpu_clear(cpu, cpu_callin_map);
local_irq_disable();
......@@ -277,8 +273,6 @@ static int octeon_cpu_disable(void)
flush_cache_all();
local_flush_tlb_all();
spin_unlock(&smp_reserve_lock);
return 0;
}
......
arch/mips/fw/arc/Makefile
浏览文件 @ 7e5b2db7
......@@ -8,5 +8,3 @@ lib-y += cmdline.o env.o file.o identify.o init.o \
lib-$(CONFIG_ARC_MEMORY) += memory.o
lib-$(CONFIG_ARC_CONSOLE) += arc_con.o
lib-$(CONFIG_ARC_PROMLIB) += promlib.o
ccflags-y := -Werror
arch/mips/include/asm/clkdev.h 0 → 100644
浏览文件 @ 7e5b2db7
/*
* based on arch/arm/include/asm/clkdev.h
*
* Copyright (C) 2008 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Helper for the clk API to assist looking up a struct clk.
*/
#ifndef __ASM_CLKDEV_H
#define __ASM_CLKDEV_H
#include <linux/slab.h>
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
{
return kzalloc(size, GFP_KERNEL);
}
#endif
arch/mips/include/asm/mach-ath79/ar71xx_regs.h
浏览文件 @ 7e5b2db7
/*
* Atheros AR71XX/AR724X/AR913X SoC register definitions
*
* Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
* Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* Parts of this file are based on Atheros' 2.6.15 BSP
* Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
......@@ -60,6 +61,9 @@
#define AR933X_EHCI_BASE 0x1b000000
#define AR933X_EHCI_SIZE 0x1000
#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR934X_WMAC_SIZE 0x20000
/*
* DDR_CTRL block
*/
......@@ -91,6 +95,12 @@
#define AR933X_DDR_REG_FLUSH_USB 0x84
#define AR933X_DDR_REG_FLUSH_WMAC 0x88
#define AR934X_DDR_REG_FLUSH_GE0 0x9c
#define AR934X_DDR_REG_FLUSH_GE1 0xa0
#define AR934X_DDR_REG_FLUSH_USB 0xa4
#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
#define AR934X_DDR_REG_FLUSH_WMAC 0xac
/*
* PLL block
*/
......@@ -150,6 +160,41 @@
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
#define AR934X_PLL_CPU_CONFIG_REG 0x00
#define AR934X_PLL_DDR_CONFIG_REG 0x04
#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
/*
* USB_CONFIG block
*/
......@@ -185,6 +230,10 @@
#define AR933X_RESET_REG_RESET_MODULE 0x1c
#define AR933X_RESET_REG_BOOTSTRAP 0xac
#define AR934X_RESET_REG_RESET_MODULE 0x1c
#define AR934X_RESET_REG_BOOTSTRAP 0xb0
#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
#define MISC_INT_TIMER3 BIT(9)
......@@ -241,6 +290,40 @@
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
#define AR934X_BOOTSTRAP_DDR1 BIT(0)
#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
(AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
(AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
AR934X_PCIE_WMAC_INT_PCIE_RC3)
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0
......@@ -249,6 +332,9 @@
#define REV_ID_MAJOR_AR7242 0x1100
#define REV_ID_MAJOR_AR9330 0x0110
#define REV_ID_MAJOR_AR9331 0x1110
#define REV_ID_MAJOR_AR9341 0x0120
#define REV_ID_MAJOR_AR9342 0x1120
#define REV_ID_MAJOR_AR9344 0x2120
#define AR71XX_REV_ID_MINOR_MASK 0x3
#define AR71XX_REV_ID_MINOR_AR7130 0x0
......@@ -267,6 +353,8 @@
#define AR724X_REV_ID_REVISION_MASK 0x3
#define AR934X_REV_ID_REVISION_MASK 0xf
/*
* SPI block
*/
......@@ -308,5 +396,6 @@
#define AR724X_GPIO_COUNT 18
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
#endif /* __ASM_MACH_AR71XX_REGS_H */
arch/mips/include/asm/mach-ath79/ath79.h
浏览文件 @ 7e5b2db7
......@@ -29,6 +29,9 @@ enum ath79_soc_type {
ATH79_SOC_AR9132,
ATH79_SOC_AR9330,
ATH79_SOC_AR9331,
ATH79_SOC_AR9341,
ATH79_SOC_AR9342,
ATH79_SOC_AR9344,
};
extern enum ath79_soc_type ath79_soc;
......@@ -75,6 +78,26 @@ static inline int soc_is_ar933x(void)
ath79_soc == ATH79_SOC_AR9331);
}
static inline int soc_is_ar9341(void)
{
return (ath79_soc == ATH79_SOC_AR9341);
}
static inline int soc_is_ar9342(void)
{
return (ath79_soc == ATH79_SOC_AR9342);
}
static inline int soc_is_ar9344(void)
{
return (ath79_soc == ATH79_SOC_AR9344);
}
static inline int soc_is_ar934x(void)
{
return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
}
extern void __iomem *ath79_ddr_base;
extern void __iomem *ath79_pll_base;
extern void __iomem *ath79_reset_base;
......
arch/mips/include/asm/mach-ath79/irq.h
浏览文件 @ 7e5b2db7
......@@ -10,11 +10,19 @@
#define __ASM_MACH_ATH79_IRQ_H
#define MIPS_CPU_IRQ_BASE 0
#define NR_IRQS 40
#define NR_IRQS 48
#define ATH79_MISC_IRQ_BASE 8
#define ATH79_MISC_IRQ_COUNT 32
#define ATH79_PCI_IRQ_BASE (ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT)
#define ATH79_PCI_IRQ_COUNT 6
#define ATH79_PCI_IRQ(_x) (ATH79_PCI_IRQ_BASE + (_x))
#define ATH79_IP2_IRQ_BASE (ATH79_PCI_IRQ_BASE + ATH79_PCI_IRQ_COUNT)
#define ATH79_IP2_IRQ_COUNT 2
#define ATH79_IP2_IRQ(_x) (ATH79_IP2_IRQ_BASE + (_x))
#define ATH79_CPU_IRQ_IP2 (MIPS_CPU_IRQ_BASE + 2)
#define ATH79_CPU_IRQ_USB (MIPS_CPU_IRQ_BASE + 3)
#define ATH79_CPU_IRQ_GE0 (MIPS_CPU_IRQ_BASE + 4)
......
arch/mips/include/asm/mach-ath79/pci-ath724x.h → arch/mips/include/asm/mach-ath79/pci.h
浏览文件 @ 7e5b2db7
/*
* Atheros 724x PCI support
* Atheros AR71XX/AR724X PCI support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef __ASM_MACH_ATH79_PCI_ATH724X_H
#define __ASM_MACH_ATH79_PCI_ATH724X_H
#ifndef __ASM_MACH_ATH79_PCI_H
#define __ASM_MACH_ATH79_PCI_H
struct ath724x_pci_data {
int irq;
void *pdata;
};
#if defined(CONFIG_PCI) && defined(CONFIG_SOC_AR71XX)
int ar71xx_pcibios_init(void);
#else
static inline int ar71xx_pcibios_init(void) { return 0; }
#endif
void ath724x_pci_add_data(struct ath724x_pci_data *data, int size);
#if defined(CONFIG_PCI_AR724X)
int ar724x_pcibios_init(int irq);
#else
static inline int ar724x_pcibios_init(int irq) { return 0; }
#endif
#endif /* __ASM_MACH_ATH79_PCI_ATH724X_H */
#endif /* __ASM_MACH_ATH79_PCI_H */
arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
浏览文件 @ 7e5b2db7
......@@ -2,6 +2,7 @@
#define BCM63XX_GPIO_H
#include <linux/init.h>
#include <bcm63xx_cpu.h>
int __init bcm63xx_gpio_init(void);
......
arch/mips/include/asm/mach-lantiq/falcon/falcon_irq.h 0 → 100644
浏览文件 @ 7e5b2db7
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com>
*/
#ifndef _FALCON_IRQ__
#define _FALCON_IRQ__
#define INT_NUM_IRQ0 8
#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
#define INT_NUM_IM1_IRL0 (INT_NUM_IM0_IRL0 + 32)
#define INT_NUM_IM2_IRL0 (INT_NUM_IM1_IRL0 + 32)
#define INT_NUM_IM3_IRL0 (INT_NUM_IM2_IRL0 + 32)
#define INT_NUM_IM4_IRL0 (INT_NUM_IM3_IRL0 + 32)
#define INT_NUM_EXTRA_START (INT_NUM_IM4_IRL0 + 32)
#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
#define MIPS_CPU_TIMER_IRQ 7
#endif /* _FALCON_IRQ__ */
arch/mips/lantiq/xway/setup-ase.c → arch/mips/include/asm/mach-lantiq/falcon/irq.h
浏览文件 @ 7e5b2db7
......@@ -3,17 +3,16 @@
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2011 John Crispin <blogic@openwrt.org>
* Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
*/
#include <lantiq_soc.h>
#ifndef __FALCON_IRQ_H
#define __FALCON_IRQ_H
#include "../prom.h"
#include "devices.h"
#include <falcon_irq.h>
void __init ltq_soc_setup(void)
{
ltq_register_ase_asc();
ltq_register_gpio();
ltq_register_wdt();
}
#define NR_IRQS 328
#include_next <irq.h>
#endif
arch/mips/include/asm/mach-lantiq/falcon/lantiq_soc.h 0 → 100644
浏览文件 @ 7e5b2db7
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#ifndef _LTQ_FALCON_H__
#define _LTQ_FALCON_H__
#ifdef CONFIG_SOC_FALCON
#include <linux/pinctrl/pinctrl.h>
#include <lantiq.h>
/* Chip IDs */
#define SOC_ID_FALCON 0x01B8
/* SoC Types */
#define SOC_TYPE_FALCON 0x01
/*
* during early_printk no ioremap possible at this early stage
* lets use KSEG1 instead
*/
#define LTQ_ASC0_BASE_ADDR 0x1E100C00
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC0_BASE_ADDR)
/* WDT */
#define LTQ_RST_CAUSE_WDTRST 0x0002
/* CHIP ID */
#define LTQ_STATUS_BASE_ADDR 0x1E802000
#define FALCON_CHIPID ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x0c))
#define FALCON_CHIPTYPE ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x38))
#define FALCON_CHIPCONF ((u32 *)(KSEG1 + LTQ_STATUS_BASE_ADDR + 0x40))
/* SYSCTL - start/stop/restart/configure/... different parts of the Soc */
#define SYSCTL_SYS1 0
#define SYSCTL_SYSETH 1
#define SYSCTL_SYSGPE 2
/* BOOT_SEL - find what boot media we have */
#define BS_FLASH 0x1
#define BS_SPI 0x4
/* global register ranges */
extern __iomem void *ltq_ebu_membase;
extern __iomem void *ltq_sys1_membase;
#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
#define ltq_sys1_w32(x, y) ltq_w32((x), ltq_sys1_membase + (y))
#define ltq_sys1_r32(x) ltq_r32(ltq_sys1_membase + (x))
#define ltq_sys1_w32_mask(clear, set, reg) \
ltq_sys1_w32((ltq_sys1_r32(reg) & ~(clear)) | (set), reg)
/*
* to keep the irq code generic we need to define this to 0 as falcon
* has no EIU/EBU
*/
#define LTQ_EBU_PCC_ISTAT 0
#endif /* CONFIG_SOC_FALCON */
#endif /* _LTQ_XWAY_H__ */
arch/mips/include/asm/mach-lantiq/gpio.h 0 → 100644
浏览文件 @ 7e5b2db7
#ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H
#define __ASM_MIPS_MACH_LANTIQ_GPIO_H
static inline int gpio_to_irq(unsigned int gpio)
{
return -1;
}
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#include <asm-generic/gpio.h>
#endif
arch/mips/include/asm/mach-lantiq/lantiq.h
浏览文件 @ 7e5b2db7
......@@ -9,6 +9,8 @@
#define _LANTIQ_H__
#include <linux/irq.h>
#include <linux/device.h>
#include <linux/clk.h>
/* generic reg access functions */
#define ltq_r32(reg) __raw_readl(reg)
......@@ -21,25 +23,9 @@
/* register access macros for EBU and CGU */
#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y))
#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x))
#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
#define ltq_ebu_w32_mask(x, y, z) \
ltq_w32_mask(x, y, ltq_ebu_membase + (z))
extern __iomem void *ltq_ebu_membase;
extern __iomem void *ltq_cgu_membase;
extern unsigned int ltq_get_cpu_ver(void);
extern unsigned int ltq_get_soc_type(void);
/* clock speeds */
#define CLOCK_60M 60000000
#define CLOCK_83M 83333333
#define CLOCK_111M 111111111
#define CLOCK_133M 133333333
#define CLOCK_167M 166666667
#define CLOCK_200M 200000000
#define CLOCK_266M 266666666
#define CLOCK_333M 333333333
#define CLOCK_400M 400000000
/* spinlock all ebu i/o */
extern spinlock_t ebu_lock;
......@@ -49,15 +35,21 @@ extern void ltq_disable_irq(struct irq_data *data);
extern void ltq_mask_and_ack_irq(struct irq_data *data);
extern void ltq_enable_irq(struct irq_data *data);
/* clock handling */
extern int clk_activate(struct clk *clk);
extern void clk_deactivate(struct clk *clk);
extern struct clk *clk_get_cpu(void);
extern struct clk *clk_get_fpi(void);
extern struct clk *clk_get_io(void);
/* find out what bootsource we have */
extern unsigned char ltq_boot_select(void);
/* find out what caused the last cpu reset */
extern int ltq_reset_cause(void);
#define LTQ_RST_CAUSE_WDTRST 0x20
#define IOPORT_RESOURCE_START 0x10000000
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xffffffff
#define LTQ_FLASH_START 0x10000000
#define LTQ_FLASH_MAX 0x04000000
#endif
arch/mips/include/asm/mach-lantiq/lantiq_platform.h
浏览文件 @ 7e5b2db7
......@@ -9,41 +9,8 @@
#ifndef _LANTIQ_PLATFORM_H__
#define _LANTIQ_PLATFORM_H__
#include <linux/mtd/partitions.h>
#include <linux/socket.h>
/* struct used to pass info to the pci core */
enum {
PCI_CLOCK_INT = 0,
PCI_CLOCK_EXT
};
#define PCI_EXIN0 0x0001
#define PCI_EXIN1 0x0002
#define PCI_EXIN2 0x0004
#define PCI_EXIN3 0x0008
#define PCI_EXIN4 0x0010
#define PCI_EXIN5 0x0020
#define PCI_EXIN_MAX 6
#define PCI_GNT1 0x0040
#define PCI_GNT2 0x0080
#define PCI_GNT3 0x0100
#define PCI_GNT4 0x0200
#define PCI_REQ1 0x0400
#define PCI_REQ2 0x0800
#define PCI_REQ3 0x1000
#define PCI_REQ4 0x2000
#define PCI_REQ_SHIFT 10
#define PCI_REQ_MASK 0xf
struct ltq_pci_data {
int clock;
int gpio;
int irq[16];
};
/* struct used to pass info to network drivers */
struct ltq_eth_data {
struct sockaddr mac;
......
arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h
浏览文件 @ 7e5b2db7
......@@ -17,50 +17,8 @@
#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8))
#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1)
#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2)
#define LTQ_ASC_ASE_TIR INT_NUM_IM2_IRL0
#define LTQ_ASC_ASE_RIR (INT_NUM_IM2_IRL0 + 2)
#define LTQ_ASC_ASE_EIR (INT_NUM_IM2_IRL0 + 3)
#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21)
#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23)
#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22)
#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23)
#define MIPS_CPU_TIMER_IRQ 7
#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0)
#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24)
#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
#define MIPS_CPU_TIMER_IRQ 7
#endif
arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
浏览文件 @ 7e5b2db7
......@@ -17,38 +17,56 @@
#define SOC_ID_DANUBE1 0x129
#define SOC_ID_DANUBE2 0x12B
#define SOC_ID_TWINPASS 0x12D
#define SOC_ID_AMAZON_SE 0x152
#define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */
#define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */
#define SOC_ID_ARX188 0x16C
#define SOC_ID_ARX168 0x16D
#define SOC_ID_ARX168_1 0x16D
#define SOC_ID_ARX168_2 0x16E
#define SOC_ID_ARX182 0x16F
/* SoC Types */
#define SOC_ID_GRX188 0x170
#define SOC_ID_GRX168 0x171
#define SOC_ID_VRX288 0x1C0 /* v1.1 */
#define SOC_ID_VRX282 0x1C1 /* v1.1 */
#define SOC_ID_VRX268 0x1C2 /* v1.1 */
#define SOC_ID_GRX268 0x1C8 /* v1.1 */
#define SOC_ID_GRX288 0x1C9 /* v1.1 */
#define SOC_ID_VRX288_2 0x00B /* v1.2 */
#define SOC_ID_VRX268_2 0x00C /* v1.2 */
#define SOC_ID_GRX288_2 0x00D /* v1.2 */
#define SOC_ID_GRX282_2 0x00E /* v1.2 */
/* SoC Types */
#define SOC_TYPE_DANUBE 0x01
#define SOC_TYPE_TWINPASS 0x02
#define SOC_TYPE_AR9 0x03
#define SOC_TYPE_VR9 0x04
#define SOC_TYPE_AMAZON_SE 0x05
#define SOC_TYPE_VR9 0x04 /* v1.1 */
#define SOC_TYPE_VR9_2 0x05 /* v1.2 */
#define SOC_TYPE_AMAZON_SE 0x06
/* BOOT_SEL - find what boot media we have */
#define BS_EXT_ROM 0x0
#define BS_FLASH 0x1
#define BS_MII0 0x2
#define BS_PCI 0x3
#define BS_UART1 0x4
#define BS_SPI 0x5
#define BS_NAND 0x6
#define BS_RMII0 0x7
/* helpers used to access the cgu */
#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y))
#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x))
extern __iomem void *ltq_cgu_membase;
/* ASC0/1 - serial port */
#define LTQ_ASC0_BASE_ADDR 0x1E100400
/*
* during early_printk no ioremap is possible
* lets use KSEG1 instead
*/
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_ASC_SIZE 0x400
/* RCU - reset control unit */
#define LTQ_RCU_BASE_ADDR 0x1F203000
#define LTQ_RCU_SIZE 0x1000
/* GPTU - general purpose timer unit */
#define LTQ_GPTU_BASE_ADDR 0x18000300
#define LTQ_GPTU_SIZE 0x100
#define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
/* EBU - external bus unit */
#define LTQ_EBU_GPIO_START 0x14000000
#define LTQ_EBU_GPIO_SIZE 0x1000
#define LTQ_EBU_BASE_ADDR 0x1E105300
#define LTQ_EBU_SIZE 0x100
#define LTQ_EBU_BUSCON0 0x0060
#define LTQ_EBU_PCC_CON 0x0090
#define LTQ_EBU_PCC_IEN 0x00A4
......@@ -57,85 +75,17 @@
#define LTQ_EBU_ADDRSEL1 0x0024
#define EBU_WRDIS 0x80000000
/* CGU - clock generation unit */
#define LTQ_CGU_BASE_ADDR 0x1F103000
#define LTQ_CGU_SIZE 0x1000
/* ICU - interrupt control unit */
#define LTQ_ICU_BASE_ADDR 0x1F880200
#define LTQ_ICU_SIZE 0x100
/* EIU - external interrupt unit */
#define LTQ_EIU_BASE_ADDR 0x1F101000
#define LTQ_EIU_SIZE 0x1000
/* PMU - power management unit */
#define LTQ_PMU_BASE_ADDR 0x1F102000
#define LTQ_PMU_SIZE 0x1000
#define PMU_DMA 0x0020
#define PMU_USB 0x8041
#define PMU_LED 0x0800
#define PMU_GPT 0x1000
#define PMU_PPE 0x2000
#define PMU_FPI 0x4000
#define PMU_SWITCH 0x10000000
/* ETOP - ethernet */
#define LTQ_ETOP_BASE_ADDR 0x1E180000
#define LTQ_ETOP_SIZE 0x40000
/* DMA */
#define LTQ_DMA_BASE_ADDR 0x1E104100
#define LTQ_DMA_SIZE 0x800
/* PCI */
#define PCI_CR_BASE_ADDR 0x1E105400
#define PCI_CR_SIZE 0x400
/* WDT */
#define LTQ_WDT_BASE_ADDR 0x1F8803F0
#define LTQ_WDT_SIZE 0x10
/* STP - serial to parallel conversion unit */
#define LTQ_STP_BASE_ADDR 0x1E100BB0
#define LTQ_STP_SIZE 0x40
/* GPIO */
#define LTQ_GPIO0_BASE_ADDR 0x1E100B10
#define LTQ_GPIO1_BASE_ADDR 0x1E100B40
#define LTQ_GPIO2_BASE_ADDR 0x1E100B70
#define LTQ_GPIO_SIZE 0x30
/* SSC */
#define LTQ_SSC_BASE_ADDR 0x1e100800
#define LTQ_SSC_SIZE 0x100
/* MEI - dsl core */
#define LTQ_MEI_BASE_ADDR 0x1E116000
/* DEU - data encryption unit */
#define LTQ_DEU_BASE_ADDR 0x1E103100
#define LTQ_RST_CAUSE_WDTRST 0x20
/* MPS - multi processor unit (voice) */
#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
/* request a non-gpio and set the PIO config */
extern int ltq_gpio_request(unsigned int pin, unsigned int alt0,
unsigned int alt1, unsigned int dir, const char *name);
#define PMU_PPE BIT(13)
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
static inline int ltq_is_ar9(void)
{
return (ltq_get_soc_type() == SOC_TYPE_AR9);
}
static inline int ltq_is_vr9(void)
{
return (ltq_get_soc_type() == SOC_TYPE_VR9);
}
#endif /* CONFIG_SOC_TYPE_XWAY */
#endif /* _LTQ_XWAY_H__ */
arch/mips/include/asm/mips-boards/generic.h
浏览文件 @ 7e5b2db7
......@@ -93,8 +93,4 @@ extern void mips_pcibios_init(void);
#define mips_pcibios_init() do { } while (0)
#endif
#ifdef CONFIG_KGDB
extern void kgdb_config(void);
#endif
#endif /* __ASM_MIPS_BOARDS_GENERIC_H */
arch/mips/include/asm/module.h
浏览文件 @ 7e5b2db7
......@@ -2,6 +2,7 @@
#define _ASM_MODULE_H
#include <linux/list.h>
#include <linux/elf.h>
#include <asm/uaccess.h>
struct mod_arch_specific {
......
arch/mips/include/asm/pci.h
浏览文件 @ 7e5b2db7
......@@ -17,6 +17,7 @@
*/
#include <linux/ioport.h>
#include <linux/of.h>
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
......@@ -26,6 +27,7 @@
struct pci_controller {
struct pci_controller *next;
struct pci_bus *bus;
struct device_node *of_node;
struct pci_ops *pci_ops;
struct resource *mem_resource;
......@@ -142,4 +144,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
extern char * (*pcibios_plat_setup)(char *str);
/* this function parses memory ranges from a device node */
extern void __devinit pci_load_of_ranges(struct pci_controller *hose,
struct device_node *node);
#endif /* _ASM_PCI_H */
arch/mips/include/asm/prom.h
浏览文件 @ 7e5b2db7
......@@ -12,6 +12,9 @@
#define __ASM_PROM_H
#ifdef CONFIG_OF
#include <linux/bug.h>
#include <linux/io.h>
#include <linux/types.h>
#include <asm/bootinfo.h>
extern int early_init_dt_scan_memory_arch(unsigned long node,
......@@ -21,6 +24,29 @@ extern int reserve_mem_mach(unsigned long addr, unsigned long size);
extern void free_mem_mach(unsigned long addr, unsigned long size);
extern void device_tree_init(void);
static inline unsigned long pci_address_to_pio(phys_addr_t address)
{
/*
* The ioport address can be directly used by inX() / outX()
*/
BUG_ON(address > IO_SPACE_LIMIT);
return (unsigned long) address;
}
#define pci_address_to_pio pci_address_to_pio
struct boot_param_header;
extern void __dt_setup_arch(struct boot_param_header *bph);
#define dt_setup_arch(sym) \
({ \
extern struct boot_param_header __dtb_##sym##_begin; \
\
__dt_setup_arch(&__dtb_##sym##_begin); \
})
#else /* CONFIG_OF */
static inline void device_tree_init(void) { }
#endif /* CONFIG_OF */
......
arch/mips/include/asm/setup.h
浏览文件 @ 7e5b2db7
......@@ -14,7 +14,8 @@ extern void *set_vi_handler(int n, vi_handler_t addr);
extern void *set_except_vector(int n, void *addr);
extern unsigned long ebase;
extern void per_cpu_trap_init(void);
extern void per_cpu_trap_init(bool);
extern void cpu_cache_init(void);
#endif /* __KERNEL__ */
......
arch/mips/include/asm/sparsemem.h
浏览文件 @ 7e5b2db7
......@@ -6,7 +6,11 @@
* SECTION_SIZE_BITS 2^N: how big each section will be
* MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
*/
#define SECTION_SIZE_BITS 28
#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_PAGE_SIZE_64KB)
# define SECTION_SIZE_BITS 29
#else
# define SECTION_SIZE_BITS 28
#endif
#define MAX_PHYSMEM_BITS 35
#endif /* CONFIG_SPARSEMEM */
......
arch/mips/include/asm/termios.h
浏览文件 @ 7e5b2db7
......@@ -60,7 +60,7 @@ struct termio {
};
#ifdef __KERNEL__
#include <linux/module.h>
#include <asm/uaccess.h>
/*
* intr=^C quit=^\ erase=del kill=^U
......
arch/mips/include/asm/traps.h
浏览文件 @ 7e5b2db7
......@@ -25,6 +25,7 @@ extern void (*board_nmi_handler_setup)(void);
extern void (*board_ejtag_handler_setup)(void);
extern void (*board_bind_eic_interrupt)(int irq, int regset);
extern void (*board_ebase_setup)(void);
extern void (*board_cache_error_setup)(void);
extern int register_nmi_notifier(struct notifier_block *nb);
......
arch/mips/include/asm/uasm.h
浏览文件 @ 7e5b2db7
......@@ -11,7 +11,7 @@
#include <linux/types.h>
#ifdef CONFIG_EXPORT_UASM
#include <linux/module.h>
#include <linux/export.h>
#define __uasminit
#define __uasminitdata
#define UASM_EXPORT_SYMBOL(sym) EXPORT_SYMBOL(sym)
......
arch/mips/jz4740/Makefile
浏览文件 @ 7e5b2db7
......@@ -16,5 +16,3 @@ obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o
# PM support
obj-$(CONFIG_PM) += pm.o
ccflags-y := -Werror -Wall
arch/mips/kernel/perf_event_mipsxx.c
浏览文件 @ 7e5b2db7
......@@ -1532,7 +1532,8 @@ init_hw_perf_events(void)
irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
} else {
#endif
if (cp0_perfcount_irq >= 0)
if ((cp0_perfcount_irq >= 0) &&
(cp0_compare_irq != cp0_perfcount_irq))
irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
else
irq = -1;
......
arch/mips/kernel/prom.c
浏览文件 @ 7e5b2db7
......@@ -95,3 +95,16 @@ void __init device_tree_init(void)
/* free the space reserved for the dt blob */
free_mem_mach(base, size);
}
void __init __dt_setup_arch(struct boot_param_header *bph)
{
if (be32_to_cpu(bph->magic) != OF_DT_HEADER) {
pr_err("DTB has bad magic, ignoring builtin OF DTB\n");
return;
}
initial_boot_params = bph;
early_init_devtree(initial_boot_params);
}
arch/mips/kernel/setup.c
浏览文件 @ 7e5b2db7
......@@ -605,6 +605,8 @@ void __init setup_arch(char **cmdline_p)
resource_init();
plat_smp_setup();
cpu_cache_init();
}
unsigned long kernelsp[NR_CPUS];
......
arch/mips/kernel/smp.c
浏览文件 @ 7e5b2db7
......@@ -106,7 +106,7 @@ asmlinkage __cpuinit void start_secondary(void)
#endif /* CONFIG_MIPS_MT_SMTC */
cpu_probe();
cpu_report();
per_cpu_trap_init();
per_cpu_trap_init(false);
mips_clockevent_init();
mp_ops->init_secondary();
......
arch/mips/kernel/traps.c
浏览文件 @ 7e5b2db7
......@@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/smp.h>
......@@ -91,7 +92,7 @@ void (*board_nmi_handler_setup)(void);
void (*board_ejtag_handler_setup)(void);
void (*board_bind_eic_interrupt)(int irq, int regset);
void (*board_ebase_setup)(void);
void __cpuinitdata(*board_cache_error_setup)(void);
static void show_raw_backtrace(unsigned long reg29)
{
......@@ -1490,7 +1491,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
return set_vi_srs_handler(n, addr, 0);
}
extern void cpu_cache_init(void);
extern void tlb_init(void);
extern void flush_tlb_handlers(void);
......@@ -1517,7 +1517,7 @@ static int __init ulri_disable(char *s)
}
__setup("noulri", ulri_disable);
void __cpuinit per_cpu_trap_init(void)
void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
{
unsigned int cpu = smp_processor_id();
unsigned int status_set = ST0_CU0;
......@@ -1616,6 +1616,8 @@ void __cpuinit per_cpu_trap_init(void)
#ifdef CONFIG_MIPS_MT_SMTC
if (bootTC) {
#endif /* CONFIG_MIPS_MT_SMTC */
/* Boot CPU's cache setup in setup_arch(). */
if (!is_boot_cpu)
cpu_cache_init();
tlb_init();
#ifdef CONFIG_MIPS_MT_SMTC
......@@ -1632,7 +1634,7 @@ void __cpuinit per_cpu_trap_init(void)
}
/* Install CPU exception handler */
void __init set_handler(unsigned long offset, void *addr, unsigned long size)
void __cpuinit set_handler(unsigned long offset, void *addr, unsigned long size)
{
memcpy((void *)(ebase + offset), addr, size);
local_flush_icache_range(ebase + offset, ebase + offset + size);
......@@ -1693,7 +1695,7 @@ void __init trap_init(void)
if (board_ebase_setup)
board_ebase_setup();
per_cpu_trap_init();
per_cpu_trap_init(true);
/*
* Copy the generic exception handlers to their final destination.
......@@ -1797,6 +1799,9 @@ void __init trap_init(void)
set_except_vector(26, handle_dsp);
if (board_cache_error_setup)
board_cache_error_setup();
if (cpu_has_vce)
/* Special exception: R4[04]00 uses also the divec space. */
memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);
......
arch/mips/lantiq/Kconfig
浏览文件 @ 7e5b2db7
......@@ -16,8 +16,22 @@ config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
select HW_HAS_PCI
config SOC_FALCON
bool "FALCON"
endchoice
choice
prompt "Devicetree"
config DT_EASY50712
bool "Easy50712"
depends on SOC_XWAY
endchoice
source "arch/mips/lantiq/xway/Kconfig"
config PCI_LANTIQ
bool "PCI Support"
depends on SOC_XWAY && PCI
endif
arch/mips/lantiq/Makefile
浏览文件 @ 7e5b2db7
......@@ -4,8 +4,11 @@
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation.
obj-y := irq.o setup.o clk.o prom.o devices.o
obj-y := irq.o clk.o prom.o
obj-y += dts/
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SOC_TYPE_XWAY) += xway/
obj-$(CONFIG_SOC_FALCON) += falcon/
arch/mips/lantiq/Platform
浏览文件 @ 7e5b2db7
......@@ -6,3 +6,4 @@ platform-$(CONFIG_LANTIQ) += lantiq/
cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq
load-$(CONFIG_LANTIQ) = 0xffffffff80002000
cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway
cflags-$(CONFIG_SOC_FALCON) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/falcon
arch/mips/lantiq/clk.c
浏览文件 @ 7e5b2db7
......@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
#include <linux/list.h>
......@@ -22,44 +23,32 @@
#include <lantiq_soc.h>
#include "clk.h"
#include "prom.h"
struct clk {
const char *name;
unsigned long rate;
unsigned long (*get_rate) (void);
};
/* lantiq socs have 3 static clocks */
static struct clk cpu_clk_generic[3];
static struct clk *cpu_clk;
static int cpu_clk_cnt;
void clkdev_add_static(unsigned long cpu, unsigned long fpi, unsigned long io)
{
cpu_clk_generic[0].rate = cpu;
cpu_clk_generic[1].rate = fpi;
cpu_clk_generic[2].rate = io;
}
/* lantiq socs have 3 static clocks */
static struct clk cpu_clk_generic[] = {
{
.name = "cpu",
.get_rate = ltq_get_cpu_hz,
}, {
.name = "fpi",
.get_rate = ltq_get_fpi_hz,
}, {
.name = "io",
.get_rate = ltq_get_io_region_clock,
},
};
static struct resource ltq_cgu_resource = {
.name = "cgu",
.start = LTQ_CGU_BASE_ADDR,
.end = LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1,
.flags = IORESOURCE_MEM,
};
/* remapped clock register range */
void __iomem *ltq_cgu_membase;
void clk_init(void)
struct clk *clk_get_cpu(void)
{
return &cpu_clk_generic[0];
}
struct clk *clk_get_fpi(void)
{
return &cpu_clk_generic[1];
}
EXPORT_SYMBOL_GPL(clk_get_fpi);
struct clk *clk_get_io(void)
{
cpu_clk = cpu_clk_generic;
cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic);
return &cpu_clk_generic[2];
}
static inline int clk_good(struct clk *clk)
......@@ -82,38 +71,71 @@ unsigned long clk_get_rate(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_rate);
struct clk *clk_get(struct device *dev, const char *id)
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int i;
for (i = 0; i < cpu_clk_cnt; i++)
if (!strcmp(id, cpu_clk[i].name))
return &cpu_clk[i];
BUG();
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
/* not used */
if (unlikely(!clk_good(clk)))
return 0;
if (clk->rates && *clk->rates) {
unsigned long *r = clk->rates;
while (*r && (*r != rate))
r++;
if (!*r) {
pr_err("clk %s.%s: trying to set invalid rate %ld\n",
clk->cl.dev_id, clk->cl.con_id, rate);
return -1;
}
}
clk->rate = rate;
return 0;
}
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_set_rate);
int clk_enable(struct clk *clk)
{
/* not used */
return 0;
if (unlikely(!clk_good(clk)))
return -1;
if (clk->enable)
return clk->enable(clk);
return -1;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
/* not used */
if (unlikely(!clk_good(clk)))
return;
if (clk->disable)
clk->disable(clk);
}
EXPORT_SYMBOL(clk_disable);
static inline u32 ltq_get_counter_resolution(void)
int clk_activate(struct clk *clk)
{
if (unlikely(!clk_good(clk)))
return -1;
if (clk->activate)
return clk->activate(clk);
return -1;
}
EXPORT_SYMBOL(clk_activate);
void clk_deactivate(struct clk *clk)
{
if (unlikely(!clk_good(clk)))
return;
if (clk->deactivate)
clk->deactivate(clk);
}
EXPORT_SYMBOL(clk_deactivate);
static inline u32 get_counter_resolution(void)
{
u32 res;
......@@ -133,21 +155,11 @@ void __init plat_time_init(void)
{
struct clk *clk;
if (insert_resource(&iomem_resource, &ltq_cgu_resource) < 0)
panic("Failed to insert cgu memory");
ltq_soc_init();
if (request_mem_region(ltq_cgu_resource.start,
resource_size(&ltq_cgu_resource), "cgu") < 0)
panic("Failed to request cgu memory");
ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start,
resource_size(&ltq_cgu_resource));
if (!ltq_cgu_membase) {
pr_err("Failed to remap cgu memory\n");
unreachable();
}
clk = clk_get(0, "cpu");
mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution();
clk = clk_get_cpu();
mips_hpt_frequency = clk_get_rate(clk) / get_counter_resolution();
write_c0_compare(read_c0_count());
pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
clk_put(clk);
}
arch/mips/lantiq/clk.h
浏览文件 @ 7e5b2db7
......@@ -9,10 +9,70 @@
#ifndef _LTQ_CLK_H__
#define _LTQ_CLK_H__
extern void clk_init(void);
#include <linux/clkdev.h>
extern unsigned long ltq_get_cpu_hz(void);
extern unsigned long ltq_get_fpi_hz(void);
extern unsigned long ltq_get_io_region_clock(void);
/* clock speeds */
#define CLOCK_33M 33333333
#define CLOCK_60M 60000000
#define CLOCK_62_5M 62500000
#define CLOCK_83M 83333333
#define CLOCK_83_5M 83500000
#define CLOCK_98_304M 98304000
#define CLOCK_100M 100000000
#define CLOCK_111M 111111111
#define CLOCK_125M 125000000
#define CLOCK_133M 133333333
#define CLOCK_150M 150000000
#define CLOCK_166M 166666666
#define CLOCK_167M 166666667
#define CLOCK_196_608M 196608000
#define CLOCK_200M 200000000
#define CLOCK_250M 250000000
#define CLOCK_266M 266666666
#define CLOCK_300M 300000000
#define CLOCK_333M 333333333
#define CLOCK_393M 393215332
#define CLOCK_400M 400000000
#define CLOCK_500M 500000000
#define CLOCK_600M 600000000
/* clock out speeds */
#define CLOCK_32_768K 32768
#define CLOCK_1_536M 1536000
#define CLOCK_2_5M 2500000
#define CLOCK_12M 12000000
#define CLOCK_24M 24000000
#define CLOCK_25M 25000000
#define CLOCK_30M 30000000
#define CLOCK_40M 40000000
#define CLOCK_48M 48000000
#define CLOCK_50M 50000000
#define CLOCK_60M 60000000
struct clk {
struct clk_lookup cl;
unsigned long rate;
unsigned long *rates;
unsigned int module;
unsigned int bits;
unsigned long (*get_rate) (void);
int (*enable) (struct clk *clk);
void (*disable) (struct clk *clk);
int (*activate) (struct clk *clk);
void (*deactivate) (struct clk *clk);
void (*reboot) (struct clk *clk);
};
extern void clkdev_add_static(unsigned long cpu, unsigned long fpi,
unsigned long io);
extern unsigned long ltq_danube_cpu_hz(void);
extern unsigned long ltq_danube_fpi_hz(void);
extern unsigned long ltq_ar9_cpu_hz(void);
extern unsigned long ltq_ar9_fpi_hz(void);
extern unsigned long ltq_vr9_cpu_hz(void);
extern unsigned long ltq_vr9_fpi_hz(void);
#endif
arch/mips/lantiq/devices.c 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/init.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/etherdevice.h>
#include <linux/time.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <lantiq_soc.h>
#include "devices.h"
/* nor flash */
static struct resource ltq_nor_resource = {
.name = "nor",
.start = LTQ_FLASH_START,
.end = LTQ_FLASH_START + LTQ_FLASH_MAX - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device ltq_nor = {
.name = "ltq_nor",
.resource = &ltq_nor_resource,
.num_resources = 1,
};
void __init ltq_register_nor(struct physmap_flash_data *data)
{
ltq_nor.dev.platform_data = data;
platform_device_register(&ltq_nor);
}
/* watchdog */
static struct resource ltq_wdt_resource = {
.name = "watchdog",
.start = LTQ_WDT_BASE_ADDR,
.end = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1,
.flags = IORESOURCE_MEM,
};
void __init ltq_register_wdt(void)
{
platform_device_register_simple("ltq_wdt", 0, &ltq_wdt_resource, 1);
}
/* asc ports */
static struct resource ltq_asc0_resources[] = {
{
.name = "asc0",
.start = LTQ_ASC0_BASE_ADDR,
.end = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
IRQ_RES(tx, LTQ_ASC_TIR(0)),
IRQ_RES(rx, LTQ_ASC_RIR(0)),
IRQ_RES(err, LTQ_ASC_EIR(0)),
};
static struct resource ltq_asc1_resources[] = {
{
.name = "asc1",
.start = LTQ_ASC1_BASE_ADDR,
.end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1,
.flags = IORESOURCE_MEM,
},
IRQ_RES(tx, LTQ_ASC_TIR(1)),
IRQ_RES(rx, LTQ_ASC_RIR(1)),
IRQ_RES(err, LTQ_ASC_EIR(1)),
};
void __init ltq_register_asc(int port)
{
switch (port) {
case 0:
platform_device_register_simple("ltq_asc", 0,
ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources));
break;
case 1:
platform_device_register_simple("ltq_asc", 1,
ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources));
break;
default:
break;
}
}
#ifdef CONFIG_PCI
/* pci */
static struct platform_device ltq_pci = {
.name = "ltq_pci",
.num_resources = 0,
};
void __init ltq_register_pci(struct ltq_pci_data *data)
{
ltq_pci.dev.platform_data = data;
platform_device_register(&ltq_pci);
}
#else
void __init ltq_register_pci(struct ltq_pci_data *data)
{
pr_err("kernel is compiled without PCI support\n");
}
#endif
arch/mips/lantiq/devices.h 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#ifndef _LTQ_DEVICES_H__
#define _LTQ_DEVICES_H__
#include <lantiq_platform.h>
#include <linux/mtd/physmap.h>
#define IRQ_RES(resname, irq) \
{.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ}
extern void ltq_register_nor(struct physmap_flash_data *data);
extern void ltq_register_wdt(void);
extern void ltq_register_asc(int port);
extern void ltq_register_pci(struct ltq_pci_data *data);
#endif
arch/mips/lantiq/dts/Makefile 0 → 100644
浏览文件 @ 7e5b2db7
obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
$(obj)/%.dtb: $(obj)/%.dts
$(call if_changed,dtc)
arch/mips/lantiq/dts/danube.dtsi 0 → 100644
浏览文件 @ 7e5b2db7
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,danube";
cpus {
cpu@0 {
compatible = "mips,mips24Kc";
};
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x120>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
};
serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
pci0: pci@E105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
};
};
};
arch/mips/lantiq/dts/easy50712.dts 0 → 100644
浏览文件 @ 7e5b2db7
/dts-v1/;
/include/ "danube.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
};
partition@20000 {
label = "linux";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x400000>;
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6"; /* stp */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
stp0: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
};
arch/mips/lantiq/early_printk.c
浏览文件 @ 7e5b2db7
......@@ -6,17 +6,16 @@
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/init.h>
#include <linux/cpu.h>
#include <lantiq.h>
#include <lantiq_soc.h>
/* no ioremap possible at this early stage, lets use KSEG1 instead */
#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
#define ASC_BUF 1024
#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048))
#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020))
#define LTQ_ASC_FSTAT ((u32 *)(LTQ_EARLY_ASC + 0x0048))
#ifdef __BIG_ENDIAN
#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020 + 3))
#else
#define LTQ_ASC_TBUF ((u32 *)(LTQ_EARLY_ASC + 0x0020))
#endif
#define TXMASK 0x3F00
#define TXOFFSET 8
......@@ -27,7 +26,7 @@ void prom_putchar(char c)
local_irq_save(flags);
do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET);
if (c == '\n')
ltq_w32('\r', LTQ_ASC_TBUF);
ltq_w32(c, LTQ_ASC_TBUF);
ltq_w8('\r', LTQ_ASC_TBUF);
ltq_w8(c, LTQ_ASC_TBUF);
local_irq_restore(flags);
}
arch/mips/lantiq/falcon/Makefile 0 → 100644
浏览文件 @ 7e5b2db7
obj-y := prom.o reset.o sysctrl.o
arch/mips/lantiq/falcon/prom.c 0 → 100644
浏览文件 @ 7e5b2db7
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
#include <asm/io.h>
#include <lantiq_soc.h>
#include "../prom.h"
#define SOC_FALCON "Falcon"
#define SOC_FALCON_D "Falcon-D"
#define SOC_FALCON_V "Falcon-V"
#define SOC_FALCON_M "Falcon-M"
#define COMP_FALCON "lantiq,falcon"
#define PART_SHIFT 12
#define PART_MASK 0x0FFFF000
#define REV_SHIFT 28
#define REV_MASK 0xF0000000
#define SREV_SHIFT 22
#define SREV_MASK 0x03C00000
#define TYPE_SHIFT 26
#define TYPE_MASK 0x3C000000
/* reset, nmi and ejtag exception vectors */
#define BOOT_REG_BASE (KSEG1 | 0x1F200000)
#define BOOT_RVEC (BOOT_REG_BASE | 0x00)
#define BOOT_NVEC (BOOT_REG_BASE | 0x04)
#define BOOT_EVEC (BOOT_REG_BASE | 0x08)
void __init ltq_soc_nmi_setup(void)
{
extern void (*nmi_handler)(void);
ltq_w32((unsigned long)&nmi_handler, (void *)BOOT_NVEC);
}
void __init ltq_soc_ejtag_setup(void)
{
extern void (*ejtag_debug_handler)(void);
ltq_w32((unsigned long)&ejtag_debug_handler, (void *)BOOT_EVEC);
}
void __init ltq_soc_detect(struct ltq_soc_info *i)
{
u32 type;
i->partnum = (ltq_r32(FALCON_CHIPID) & PART_MASK) >> PART_SHIFT;
i->rev = (ltq_r32(FALCON_CHIPID) & REV_MASK) >> REV_SHIFT;
i->srev = ((ltq_r32(FALCON_CHIPCONF) & SREV_MASK) >> SREV_SHIFT);
i->compatible = COMP_FALCON;
i->type = SOC_TYPE_FALCON;
sprintf(i->rev_type, "%c%d%d", (i->srev & 0x4) ? ('B') : ('A'),
i->rev & 0x7, (i->srev & 0x3) + 1);
switch (i->partnum) {
case SOC_ID_FALCON:
type = (ltq_r32(FALCON_CHIPTYPE) & TYPE_MASK) >> TYPE_SHIFT;
switch (type) {
case 0:
i->name = SOC_FALCON_D;
break;
case 1:
i->name = SOC_FALCON_V;
break;
case 2:
i->name = SOC_FALCON_M;
break;
default:
i->name = SOC_FALCON;
break;
}
break;
default:
unreachable();
break;
}
}
arch/mips/lantiq/falcon/reset.c 0 → 100644
浏览文件 @ 7e5b2db7
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com>
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/pm.h>
#include <asm/reboot.h>
#include <linux/export.h>
#include <lantiq_soc.h>
/* CPU0 Reset Source Register */
#define SYS1_CPU0RS 0x0040
/* reset cause mask */
#define CPU0RS_MASK 0x0003
/* CPU0 Boot Mode Register */
#define SYS1_BM 0x00a0
/* boot mode mask */
#define BM_MASK 0x0005
/* allow platform code to find out what surce we booted from */
unsigned char ltq_boot_select(void)
{
return ltq_sys1_r32(SYS1_BM) & BM_MASK;
}
/* allow the watchdog driver to find out what the boot reason was */
int ltq_reset_cause(void)
{
return ltq_sys1_r32(SYS1_CPU0RS) & CPU0RS_MASK;
}
EXPORT_SYMBOL_GPL(ltq_reset_cause);
#define BOOT_REG_BASE (KSEG1 | 0x1F200000)
#define BOOT_PW1_REG (BOOT_REG_BASE | 0x20)
#define BOOT_PW2_REG (BOOT_REG_BASE | 0x24)
#define BOOT_PW1 0x4C545100
#define BOOT_PW2 0x0051544C
#define WDT_REG_BASE (KSEG1 | 0x1F8803F0)
#define WDT_PW1 0x00BE0000
#define WDT_PW2 0x00DC0000
static void machine_restart(char *command)
{
local_irq_disable();
/* reboot magic */
ltq_w32(BOOT_PW1, (void *)BOOT_PW1_REG); /* 'LTQ\0' */
ltq_w32(BOOT_PW2, (void *)BOOT_PW2_REG); /* '\0QTL' */
ltq_w32(0, (void *)BOOT_REG_BASE); /* reset Bootreg RVEC */
/* watchdog magic */
ltq_w32(WDT_PW1, (void *)WDT_REG_BASE);
ltq_w32(WDT_PW2 |
(0x3 << 26) | /* PWL */
(0x2 << 24) | /* CLKDIV */
(0x1 << 31) | /* enable */
(1), /* reload */
(void *)WDT_REG_BASE);
unreachable();
}
static void machine_halt(void)
{
local_irq_disable();
unreachable();
}
static void machine_power_off(void)
{
local_irq_disable();
unreachable();
}
static int __init mips_reboot_setup(void)
{
_machine_restart = machine_restart;
_machine_halt = machine_halt;
pm_power_off = machine_power_off;
return 0;
}
arch_initcall(mips_reboot_setup);
arch/mips/lantiq/falcon/sysctrl.c 0 → 100644
浏览文件 @ 7e5b2db7
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
* Copyright (C) 2011 John Crispin <blogic@openwrt.org>
*/
#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/clkdev.h>
#include <linux/of_address.h>
#include <asm/delay.h>
#include <lantiq_soc.h>
#include "../clk.h"
/* infrastructure control register */
#define SYS1_INFRAC 0x00bc
/* Configuration fuses for drivers and pll */
#define STATUS_CONFIG 0x0040
/* GPE frequency selection */
#define GPPC_OFFSET 24
#define GPEFREQ_MASK 0x00000C0
#define GPEFREQ_OFFSET 10
/* Clock status register */
#define SYSCTL_CLKS 0x0000
/* Clock enable register */
#define SYSCTL_CLKEN 0x0004
/* Clock clear register */
#define SYSCTL_CLKCLR 0x0008
/* Activation Status Register */
#define SYSCTL_ACTS 0x0020
/* Activation Register */
#define SYSCTL_ACT 0x0024
/* Deactivation Register */
#define SYSCTL_DEACT 0x0028
/* reboot Register */
#define SYSCTL_RBT 0x002c
/* CPU0 Clock Control Register */
#define SYS1_CPU0CC 0x0040
/* HRST_OUT_N Control Register */
#define SYS1_HRSTOUTC 0x00c0
/* clock divider bit */
#define CPU0CC_CPUDIV 0x0001
/* Activation Status Register */
#define ACTS_ASC1_ACT 0x00000800
#define ACTS_I2C_ACT 0x00004000
#define ACTS_P0 0x00010000
#define ACTS_P1 0x00010000
#define ACTS_P2 0x00020000
#define ACTS_P3 0x00020000
#define ACTS_P4 0x00040000
#define ACTS_PADCTRL0 0x00100000
#define ACTS_PADCTRL1 0x00100000
#define ACTS_PADCTRL2 0x00200000
#define ACTS_PADCTRL3 0x00200000
#define ACTS_PADCTRL4 0x00400000
#define sysctl_w32(m, x, y) ltq_w32((x), sysctl_membase[m] + (y))
#define sysctl_r32(m, x) ltq_r32(sysctl_membase[m] + (x))
#define sysctl_w32_mask(m, clear, set, reg) \
sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg)
#define status_w32(x, y) ltq_w32((x), status_membase + (y))
#define status_r32(x) ltq_r32(status_membase + (x))
static void __iomem *sysctl_membase[3], *status_membase;
void __iomem *ltq_sys1_membase, *ltq_ebu_membase;
void falcon_trigger_hrst(int level)
{
sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC);
}
static inline void sysctl_wait(struct clk *clk,
unsigned int test, unsigned int reg)
{
int err = 1000000;
do {} while (--err && ((sysctl_r32(clk->module, reg)
& clk->bits) != test));
if (!err)
pr_err("module de/activation failed %d %08X %08X %08X\n",
clk->module, clk->bits, test,
sysctl_r32(clk->module, reg) & clk->bits);
}
static int sysctl_activate(struct clk *clk)
{
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
return 0;
}
static void sysctl_deactivate(struct clk *clk)
{
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT);
sysctl_wait(clk, 0, SYSCTL_ACTS);
}
static int sysctl_clken(struct clk *clk)
{
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
return 0;
}
static void sysctl_clkdis(struct clk *clk)
{
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
sysctl_wait(clk, 0, SYSCTL_CLKS);
}
static void sysctl_reboot(struct clk *clk)
{
unsigned int act;
unsigned int bits;
act = sysctl_r32(clk->module, SYSCTL_ACT);
bits = ~act & clk->bits;
if (bits != 0) {
sysctl_w32(clk->module, bits, SYSCTL_CLKEN);
sysctl_w32(clk->module, bits, SYSCTL_ACT);
sysctl_wait(clk, bits, SYSCTL_ACTS);
}
sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT);
sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
}
/* enable the ONU core */
static void falcon_gpe_enable(void)
{
unsigned int freq;
unsigned int status;
/* if if the clock is already enabled */
status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
if (status & (1 << (GPPC_OFFSET + 1)))
return;
if (status_r32(STATUS_CONFIG) == 0)
freq = 1; /* use 625MHz on unfused chip */
else
freq = (status_r32(STATUS_CONFIG) &
GPEFREQ_MASK) >>
GPEFREQ_OFFSET;
/* apply new frequency */
sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
udelay(1);
/* enable new frequency */
sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
udelay(1);
}
static inline void clkdev_add_sys(const char *dev, unsigned int module,
unsigned int bits)
{
struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
clk->cl.dev_id = dev;
clk->cl.con_id = NULL;
clk->cl.clk = clk;
clk->module = module;
clk->activate = sysctl_activate;
clk->deactivate = sysctl_deactivate;
clk->enable = sysctl_clken;
clk->disable = sysctl_clkdis;
clk->reboot = sysctl_reboot;
clkdev_add(&clk->cl);
}
void __init ltq_soc_init(void)
{
struct device_node *np_status =
of_find_compatible_node(NULL, NULL, "lantiq,status-falcon");
struct device_node *np_ebu =
of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon");
struct device_node *np_sys1 =
of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon");
struct device_node *np_syseth =
of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon");
struct device_node *np_sysgpe =
of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon");
struct resource res_status, res_ebu, res_sys[3];
int i;
/* check if all the core register ranges are available */
if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe)
panic("Failed to load core nodes from devicetree");
if (of_address_to_resource(np_status, 0, &res_status) ||
of_address_to_resource(np_ebu, 0, &res_ebu) ||
of_address_to_resource(np_sys1, 0, &res_sys[0]) ||
of_address_to_resource(np_syseth, 0, &res_sys[1]) ||
of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
panic("Failed to get core resources");
if ((request_mem_region(res_status.start, resource_size(&res_status),
res_status.name) < 0) ||
(request_mem_region(res_ebu.start, resource_size(&res_ebu),
res_ebu.name) < 0) ||
(request_mem_region(res_sys[0].start,
resource_size(&res_sys[0]),
res_sys[0].name) < 0) ||
(request_mem_region(res_sys[1].start,
resource_size(&res_sys[1]),
res_sys[1].name) < 0) ||
(request_mem_region(res_sys[2].start,
resource_size(&res_sys[2]),
res_sys[2].name) < 0))
pr_err("Failed to request core reources");
status_membase = ioremap_nocache(res_status.start,
resource_size(&res_status));
ltq_ebu_membase = ioremap_nocache(res_ebu.start,
resource_size(&res_ebu));
if (!status_membase || !ltq_ebu_membase)
panic("Failed to remap core resources");
for (i = 0; i < 3; i++) {
sysctl_membase[i] = ioremap_nocache(res_sys[i].start,
resource_size(&res_sys[i]));
if (!sysctl_membase[i])
panic("Failed to remap sysctrl resources");
}
ltq_sys1_membase = sysctl_membase[0];
falcon_gpe_enable();
/* get our 3 static rates for cpu, fpi and io clocks */
if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M);
else
clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M);
/* add our clock domains */
clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2);
clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1);
clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3);
clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4);
clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0);
clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2);
clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
clkdev_add_sys("1e100C00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
}
arch/mips/lantiq/irq.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/lantiq/machtypes.h 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#ifndef _LANTIQ_MACH_H__
#define _LANTIQ_MACH_H__
#include <asm/mips_machine.h>
enum lantiq_mach_type {
LTQ_MACH_GENERIC = 0,
LTQ_MACH_EASY50712, /* Danube evaluation board */
LTQ_MACH_EASY50601, /* Amazon SE evaluation board */
};
#endif
arch/mips/lantiq/prom.c
浏览文件 @ 7e5b2db7
......@@ -8,6 +8,7 @@
#include <linux/export.h>
#include <linux/clk.h>
#include <linux/of_platform.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
......@@ -16,19 +17,15 @@
#include "prom.h"
#include "clk.h"
static struct ltq_soc_info soc_info;
unsigned int ltq_get_cpu_ver(void)
{
return soc_info.rev;
}
EXPORT_SYMBOL(ltq_get_cpu_ver);
/* access to the ebu needs to be locked between different drivers */
DEFINE_SPINLOCK(ebu_lock);
EXPORT_SYMBOL_GPL(ebu_lock);
unsigned int ltq_get_soc_type(void)
{
return soc_info.type;
}
EXPORT_SYMBOL(ltq_get_soc_type);
/*
* this struct is filled by the soc specific detection code and holds
* information about the specific soc type, revision and name
*/
static struct ltq_soc_info soc_info;
const char *get_system_type(void)
{
......@@ -45,27 +42,62 @@ static void __init prom_init_cmdline(void)
char **argv = (char **) KSEG1ADDR(fw_arg1);
int i;
arcs_cmdline[0] = '\0';
for (i = 0; i < argc; i++) {
char *p = (char *) KSEG1ADDR(argv[i]);
if (p && *p) {
if (CPHYSADDR(p) && *p) {
strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
}
}
}
void __init prom_init(void)
void __init plat_mem_setup(void)
{
struct clk *clk;
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
set_io_port_base((unsigned long) KSEG1);
/*
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
__dt_setup_arch(&__dtb_start);
}
void __init prom_init(void)
{
/* call the soc specific detetcion code and get it to fill soc_info */
ltq_soc_detect(&soc_info);
clk_init();
clk = clk_get(0, "cpu");
snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
soc_info.name, soc_info.rev);
clk_put(clk);
snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
soc_info.name, soc_info.rev_type);
soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
pr_info("SoC: %s\n", soc_info.sys_type);
prom_init_cmdline();
#if defined(CONFIG_MIPS_MT_SMP)
if (register_vsmp_smp_ops())
panic("failed to register_vsmp_smp_ops()");
#endif
}
int __init plat_of_setup(void)
{
static struct of_device_id of_ids[3];
if (!of_have_populated_dt())
panic("device tree not present");
strncpy(of_ids[0].compatible, soc_info.compatible,
sizeof(of_ids[0].compatible));
strncpy(of_ids[1].compatible, "simple-bus",
sizeof(of_ids[1].compatible));
return of_platform_bus_probe(NULL, of_ids, NULL);
}
arch_initcall(plat_of_setup);
arch/mips/lantiq/prom.h
浏览文件 @ 7e5b2db7
......@@ -10,16 +10,22 @@
#define _LTQ_PROM_H__
#define LTQ_SYS_TYPE_LEN 0x100
#define LTQ_SYS_REV_LEN 0x10
struct ltq_soc_info {
unsigned char *name;
unsigned int rev;
unsigned char rev_type[LTQ_SYS_REV_LEN];
unsigned int srev;
unsigned int partnum;
unsigned int type;
unsigned char sys_type[LTQ_SYS_TYPE_LEN];
unsigned char *compatible;
};
extern void ltq_soc_detect(struct ltq_soc_info *i);
extern void ltq_soc_setup(void);
extern void ltq_soc_init(void);
extern struct boot_param_header __dtb_start;
#endif
arch/mips/lantiq/setup.c 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
#include <lantiq_soc.h>
#include "machtypes.h"
#include "devices.h"
#include "prom.h"
void __init plat_mem_setup(void)
{
/* assume 16M as default incase uboot fails to pass proper ramsize */
unsigned long memsize = 16;
char **envp = (char **) KSEG1ADDR(fw_arg2);
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
set_io_port_base((unsigned long) KSEG1);
while (*envp) {
char *e = (char *)KSEG1ADDR(*envp);
if (!strncmp(e, "memsize=", 8)) {
e += 8;
if (strict_strtoul(e, 0, &memsize))
pr_warn("bad memsize specified\n");
}
envp++;
}
memsize *= 1024 * 1024;
add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
}
static int __init
lantiq_setup(void)
{
ltq_soc_setup();
mips_machine_setup();
return 0;
}
arch_initcall(lantiq_setup);
static void __init
lantiq_generic_init(void)
{
/* Nothing to do */
}
MIPS_MACHINE(LTQ_MACH_GENERIC,
"Generic",
"Generic Lantiq based board",
lantiq_generic_init);
arch/mips/lantiq/xway/Kconfig 已删除 100644 → 0
浏览文件 @ 227d1e43
if SOC_XWAY
menu "MIPS Machine"
config LANTIQ_MACH_EASY50712
bool "Easy50712 - Danube"
default y
endmenu
endif
if SOC_AMAZON_SE
menu "MIPS Machine"
config LANTIQ_MACH_EASY50601
bool "Easy50601 - Amazon SE"
default y
endmenu
endif
arch/mips/lantiq/xway/Makefile
浏览文件 @ 7e5b2db7
obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o
obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o
obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o
obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o
arch/mips/lantiq/xway/clk-ase.c 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2011 John Crispin <blogic@openwrt.org>
*/
#include <linux/io.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <asm/time.h>
#include <asm/irq.h>
#include <asm/div64.h>
#include <lantiq_soc.h>
/* cgu registers */
#define LTQ_CGU_SYS 0x0010
unsigned int ltq_get_io_region_clock(void)
{
return CLOCK_133M;
}
EXPORT_SYMBOL(ltq_get_io_region_clock);
unsigned int ltq_get_fpi_bus_clock(int fpi)
{
return CLOCK_133M;
}
EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
unsigned int ltq_get_cpu_hz(void)
{
if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
return CLOCK_266M;
else
return CLOCK_133M;
}
EXPORT_SYMBOL(ltq_get_cpu_hz);
unsigned int ltq_get_fpi_hz(void)
{
return CLOCK_133M;
}
EXPORT_SYMBOL(ltq_get_fpi_hz);
arch/mips/lantiq/xway/clk-xway.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/clk.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/lantiq/xway/devices.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/devices.h 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#ifndef _LTQ_DEVICES_XWAY_H__
#define _LTQ_DEVICES_XWAY_H__
#include "../devices.h"
#include <linux/phy.h>
extern void ltq_register_gpio(void);
extern void ltq_register_gpio_stp(void);
extern void ltq_register_ase_asc(void);
extern void ltq_register_etop(struct ltq_eth_data *eth);
#endif
arch/mips/lantiq/xway/dma.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/lantiq/xway/ebu.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/gpio.c
浏览文件 @ 7e5b2db7
......@@ -36,18 +36,6 @@ struct ltq_gpio {
static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
int gpio_to_irq(unsigned int gpio)
{
return -EINVAL;
}
EXPORT_SYMBOL(gpio_to_irq);
int irq_to_gpio(unsigned int gpio)
{
return -EINVAL;
}
EXPORT_SYMBOL(irq_to_gpio);
int ltq_gpio_request(unsigned int pin, unsigned int alt0,
unsigned int alt1, unsigned int dir, const char *name)
{
......
arch/mips/lantiq/xway/gpio_stp.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/mach-easy50601.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/mach-easy50712.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/pmu.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/prom-ase.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/lantiq/xway/reset.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/lantiq/xway/setup-xway.c 已删除 100644 → 0
浏览文件 @ 227d1e43
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2011 John Crispin <blogic@openwrt.org>
*/
#include <lantiq_soc.h>
#include "../prom.h"
#include "devices.h"
void __init ltq_soc_setup(void)
{
ltq_register_asc(0);
ltq_register_asc(1);
ltq_register_gpio();
ltq_register_wdt();
}
arch/mips/lantiq/xway/sysctrl.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/mm/c-octeon.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/mm/c-r4k.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/oprofile/Makefile
浏览文件 @ 7e5b2db7
ccflags-y := -Werror
obj-$(CONFIG_OPROFILE) += oprofile.o
DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
......
arch/mips/pci/Makefile
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/fixup-lantiq.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/ops-loongson2.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/pci-ar71xx.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/pci-ar724x.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/pci-ath724x.c 已删除 100644 → 0
浏览文件 @ 227d1e43
此差异已折叠。
arch/mips/pci/pci-lantiq.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/pci/pci.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/powertv/Makefile
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/powertv/asic/Makefile
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/powertv/pci/Makefile
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/rb532/devices.c
浏览文件 @ 7e5b2db7
此差异已折叠。
arch/mips/sni/setup.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/gpio/Kconfig
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/gpio/Makefile
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/gpio/gpio-stp-xway.c 0 → 100644
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/mtd/maps/lantiq-flash.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/of/of_pci_irq.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/pci/pci.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/tty/serial/lantiq.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/tty/serial/sb1250-duart.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/tty/serial/zs.c
浏览文件 @ 7e5b2db7
此差异已折叠。
drivers/watchdog/lantiq_wdt.c
浏览文件 @ 7e5b2db7
此差异已折叠。
include/linux/of_pci.h
浏览文件 @ 7e5b2db7
此差异已折叠。
include/linux/pci.h
浏览文件 @ 7e5b2db7
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或