diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index ad319f84f56018ba1297676c2a69586864a6b4e0..2e99b5b57350d06a43f4fbed97cde970116b595f 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -46,10 +46,12 @@ PIT Timer required properties: shared across all System Controller members. System Timer (ST) required properties: -- compatible: Should be "atmel,at91rm9200-st" +- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd" - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +Its subnodes can be: +- watchdog: compatible should be "atmel,at91rm9200-wdt" TC/TCLIB Timer required properties: - compatible: Should be "atmel,-tcb". diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index f28d82bbbc56b3f3dff7716ede2f200f315d8e70..3c5c631328d3b6cbb4d7c9edefddf936347a545e 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -94,8 +94,11 @@ specific to ARM. - compatible Usage: required Value type: - Definition: must be "arm,cci-400-pmu" - + Definition: Must contain one of: + "arm,cci-400-pmu,r0" + "arm,cci-400-pmu,r1" + "arm,cci-400-pmu" - DEPRECATED, permitted only where OS has + secure acces to CCI registers - reg: Usage: required Value type: Integer cells. A register entry, expressed diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.txt b/Documentation/devicetree/bindings/bus/renesas,bsc.txt new file mode 100644 index 0000000000000000000000000000000000000000..90e94726943772c495942e39ebe86decf1d4d7f1 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/renesas,bsc.txt @@ -0,0 +1,46 @@ +Renesas Bus State Controller (BSC) +================================== + +The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus +Bridge", or "External Bus Interface") can be found in several Renesas ARM SoCs. +It provides an external bus for connecting multiple external devices to the +SoC, driving several chip select lines, for e.g. NOR FLASH, Ethernet and USB. + +While the BSC is a fairly simple memory-mapped bus, it may be part of a PM +domain, and may have a gateable functional clock. +Before a device connected to the BSC can be accessed, the PM domain +containing the BSC must be powered on, and the functional clock +driving the BSC must be enabled. + +The bindings for the BSC extend the bindings for "simple-pm-bus". + + +Required properties + - compatible: Must contain an SoC-specific value, and "renesas,bsc" and + "simple-pm-bus" as fallbacks. + SoC-specific values can be: + "renesas,bsc-r8a73a4" for R-Mobile APE6 (r8a73a4) + "renesas,bsc-sh73a0" for SH-Mobile AG5 (sh73a0) + - #address-cells, #size-cells, ranges: Must describe the mapping between + parent address and child address spaces. + - reg: Must contain the base address and length to access the bus controller. + +Optional properties: + - interrupts: Must contain a reference to the BSC interrupt, if available. + - clocks: Must contain a reference to the functional clock, if available. + - power-domains: Must contain a reference to the PM domain, if available. + + +Example: + + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt new file mode 100644 index 0000000000000000000000000000000000000000..d032237512c271f29da4d321d64605d6806e5c13 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt @@ -0,0 +1,44 @@ +Simple Power-Managed Bus +======================== + +A Simple Power-Managed Bus is a transparent bus that doesn't need a real +driver, as it's typically initialized by the boot loader. + +However, its bus controller is part of a PM domain, or under the control of a +functional clock. Hence, the bus controller's PM domain and/or clock must be +enabled for child devices connected to the bus (either on-SoC or externally) +to function. + +While "simple-pm-bus" follows the "simple-bus" set of properties, as specified +in ePAPR, it is not an extension of "simple-bus". + + +Required properties: + - compatible: Must contain at least "simple-pm-bus". + Must not contain "simple-bus". + It's recommended to let this be preceded by one or more + vendor-specific compatible values. + - #address-cells, #size-cells, ranges: Must describe the mapping between + parent address and child address spaces. + +Optional platform-specific properties for clock or PM domain control (at least +one of them is required): + - clocks: Must contain a reference to the functional clock(s), + - power-domains: Must contain a reference to the PM domain. +Please refer to the binding documentation for the clock and/or PM domain +providers for more details. + + +Example: + + bsc: bus@fec10000 { + compatible = "renesas,bsc-sh73a0", "renesas,bsc", + "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20000000>; + reg = <0xfec10000 0x400>; + interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&zb_clk>; + power-domains = <&pd_a4s>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt index 4ce24d425bf18a42daa14d529165f506e4e3f224..2f5ede39bea2d1d3cffacbcbe0ed103a7d2c708a 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt @@ -6,7 +6,8 @@ configuration settings. The mode setting will govern the input/output mode of the 4 GSBI IOs. Required properties: -- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064 +- compatible: Should contain "qcom,gsbi-v1.0.0" +- cell-index: Should contain the GSBI index - reg: Address range for GSBI registers - clocks: required clock - clock-names: must contain "iface" entry @@ -16,6 +17,8 @@ Required properties: Optional properties: - qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. +- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses + dma. Required properties if child node exists: - #address-cells: Must be 1 @@ -39,6 +42,7 @@ Example for APQ8064: gsbi4@16300000 { compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; reg = <0x16300000 0x100>; clocks = <&gcc GSBI4_H_CLK>; clock-names = "iface"; @@ -48,22 +52,24 @@ Example for APQ8064: qcom,mode = ; qcom,crci = ; + syscon-tcsr = <&tcsr>; + /* child nodes go under here */ i2c_qup4: i2c@16380000 { - compatible = "qcom,i2c-qup-v1.1.1"; - reg = <0x16380000 0x1000>; - interrupts = <0 153 0>; + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; - clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; - clock-frequency = <200000>; + clock-frequency = <200000>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - }; + }; uart4: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; @@ -76,3 +82,7 @@ Example for APQ8064: }; }; + tcsr: syscon@1a400000 { + compatible = "qcom,apq8064-tcsr", "syscon"; + reg = <0x1a400000 0x100>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index fadb73c40e28f0a15e80a9147fda5fa9136ebb85..39fb0435362ce121a2e106a69491b130eb757bbd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1327,6 +1327,7 @@ F: drivers/tty/serial/msm_serial.h F: drivers/tty/serial/msm_serial.c F: drivers/*/pm8???-* F: drivers/mfd/ssbi.c +F: drivers/firmware/qcom_scm.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git ARM/RADISYS ENP2611 MACHINE SUPPORT diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d74c9ea6eb064f48afcde2e9b9768a2953a4e584..29e80adbf6ccbcb3ec58f16b3c0479025b0edafe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2146,6 +2146,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index c515e4b160be641343014e2c35b17ce52777d0aa..4fb333bd1f85f10dcce81e953cf232f1ab14c74f 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -356,9 +356,13 @@ }; st: timer@fffffd00 { - compatible = "atmel,at91rm9200-st"; + compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd"; reg = <0xfffffd00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + + watchdog { + compatible = "atmel,at91rm9200-wdt"; + }; }; rtc: rtc@fffffe00 { diff --git a/arch/arm/include/asm/arm-cci.h b/arch/arm/include/asm/arm-cci.h new file mode 100644 index 0000000000000000000000000000000000000000..fe77f7ab7e6bbb91f2683cc46b169ae76eabc8ca --- /dev/null +++ b/arch/arm/include/asm/arm-cci.h @@ -0,0 +1,42 @@ +/* + * arch/arm/include/asm/arm-cci.h + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __ASM_ARM_CCI_H +#define __ASM_ARM_CCI_H + +#ifdef CONFIG_MCPM +#include + +/* + * We don't have a reliable way of detecting whether, + * if we have access to secure-only registers, unless + * mcpm is registered. + */ +static inline bool platform_has_secure_cci_access(void) +{ + return mcpm_is_available(); +} + +#else +static inline bool platform_has_secure_cci_access(void) +{ + return false; +} +#endif + +#endif diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4da6bae047f3e1ed3b5fa4915590a4e08236e43b..24b59c75f6afde705c6fb7df06d7d97d7e949963 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -77,6 +77,7 @@ if SOC_SAM_V4_V5 config SOC_AT91RM9200 bool "AT91RM9200" select ATMEL_AIC_IRQ + select ATMEL_ST select COMMON_CLK_AT91 select CPU_ARM920T select GENERIC_CLOCKEVENTS diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index ea54c9824d891bfbaeb1d71a719ebc15784f6f4d..38aaef7b994edb609c544b4aed82cbc3d3d47ff2 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -7,7 +7,7 @@ obj-y := soc.o obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o # CPU-specific support -obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o +obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o obj-$(CONFIG_SOC_SAMA5) += sama5.o diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index bfc9aed90b91382b88ef8af5412efc2b19f98575..eaf58f88ef5dcd262a862e96b0656b03a31cf8b3 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -15,8 +15,6 @@ #include #include -#include - #include "generic.h" #include "soc.h" @@ -25,21 +23,6 @@ static const struct at91_soc rm9200_socs[] = { { /* sentinel */ }, }; -static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd) -{ - /* - * Perform a hardware reset with the use of the Watchdog timer. - */ - at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); - at91_st_write(AT91_ST_CR, AT91_ST_WDRST); -} - -static void __init at91rm9200_dt_timer_init(void) -{ - of_clk_init(NULL); - at91rm9200_timer_init(); -} - static void __init at91rm9200_dt_device_init(void) { struct soc_device *soc; @@ -52,7 +35,6 @@ static void __init at91rm9200_dt_device_init(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); arm_pm_idle = at91rm9200_idle; - arm_pm_restart = at91rm9200_restart; at91rm9200_pm_init(); } @@ -62,7 +44,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = { }; DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200") - .init_time = at91rm9200_dt_timer_init, .init_machine = at91rm9200_dt_device_init, .dt_compat = at91rm9200_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 2b396c4e1fc1650b80dc0f44ea370e69b149b6d6..b0fa7dc7286d9dc120a79c77be70fe0adb365910 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -18,9 +18,6 @@ extern void __init at91_map_io(void); extern void __init at91_alt_map_io(void); - /* Timer */ -extern void at91rm9200_timer_init(void); - /* idle */ extern void at91rm9200_idle(void); extern void at91sam9_idle(void); diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h deleted file mode 100644 index 67fdbd13c3ed67db9ec426630ed4bb7e1b50bdb1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_st.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_st.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * System Timer (ST) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ST_H -#define AT91_ST_H - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_st_base; - -#define at91_st_read(field) \ - __raw_readl(at91_st_base + field) - -#define at91_st_write(field, value) \ - __raw_writel(value, at91_st_base + field) -#else -.extern at91_st_base -#endif - -#define AT91_ST_CR 0x00 /* Control Register */ -#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */ - -#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ -#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */ - -#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ -#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */ -#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */ -#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */ - -#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ -#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */ - -#define AT91_ST_SR 0x10 /* Status Register */ -#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */ -#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */ -#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */ -#define AT91_ST_ALMS (1 << 3) /* Alarm Status */ - -#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ -#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ -#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */ - -#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ -#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */ - -#endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 603820e5aba79bc17bab7acd56f87a69af087c45..81064cd61a0a9e72536d6dd6df56555bae352d61 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -123,7 +123,7 @@ config SOC_EXYNOS5800 config EXYNOS5420_MCPM bool "Exynos5420 Multi-Cluster PM support" depends on MCPM && SOC_EXYNOS5420 - select ARM_CCI + select ARM_CCI400_PORT_CTRL select ARM_CPU_SUSPEND help This is needed to provide CPU and cluster power management diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index f7e463ca02877a77e956fa7e788f40779139896d..9f59e58da3a47717dfbe64c4813446b3945ba8c9 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -1,6 +1,7 @@ menuconfig ARCH_MEDIATEK bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7 select ARM_GIC + select PINCTRL select MTK_TIMER help Support for Mediatek MT65xx & MT81xx SoCs diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index d5951b17b7368c0713b5bddd56e03cff34b6cc17..72918c4973ea7f0cc86da080916c9f72bd327fcd 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -96,14 +96,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - if (gpmc_t) { - err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t); - if (err < 0) { - pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err); - return err; - } - } - memset(&s, 0, sizeof(struct gpmc_settings)); if (gpmc_nand_data->of_node) gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); @@ -111,6 +103,16 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, gpmc_set_legacy(gpmc_nand_data, &s); s.device_nand = true; + + if (gpmc_t) { + err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s); + if (err < 0) { + pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", + err); + return err; + } + } + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); if (err < 0) goto out_free_cs; diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 53d197e0c1f34525b828e256bff935e41ebe7d33..f899e77ff5e6e37eca7d131533f3526a13b5d20c 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -293,7 +293,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) if (ret < 0) return ret; - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_async); if (ret < 0) return ret; @@ -331,7 +331,7 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) if (ret < 0) return ret; - ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t, &onenand_sync); if (ret < 0) return ret; diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8333400898fb0e14b175fed06731e0d76304c605..e554d9e66a1ce35af7e4db9567fb9b398a451e0f 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -71,7 +71,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) gpmc_calc_timings(&t, &tusb_async, &dev_t); - return gpmc_cs_set_timings(async_cs, &t); + return gpmc_cs_set_timings(async_cs, &t, &tusb_async); } static int tusb_set_sync_mode(unsigned sysclk_ps) @@ -98,7 +98,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) gpmc_calc_timings(&t, &tusb_sync, &dev_t); - return gpmc_cs_set_timings(sync_cs, &t); + return gpmc_cs_set_timings(sync_cs, &t, &tusb_sync); } /* tusb driver calls this when it changes the chip's clocking */ diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 48003ea652b9f56341cce4b8d1fe7fb2bf89d8d1..2256cd1e25d156cfd7e40d6c86cd8a9a1b104997 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -22,7 +22,4 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -config QCOM_SCM - bool - endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile index 8f756ae1ae31ea69780361079902af7f8c9d97fb..e324375fa9195227f951025e41fce094819184cb 100644 --- a/arch/arm/mach-qcom/Makefile +++ b/arch/arm/mach-qcom/Makefile @@ -1,5 +1,2 @@ obj-y := board.o obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 09cffed4c0a445784371cf493a4e210b1b261c89..5cde63a64b34d9d5ff2b6c1821d4a4caa77586ae 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -17,10 +17,10 @@ #include #include #include +#include #include -#include "scm-boot.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0 #define SCSS_CPU1CORE_RESET 0x2d80 @@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { - int cpu, map; - unsigned int flags = 0; - static const int cold_boot_flags[] = { - 0, - SCM_FLAG_COLDBOOT_CPU1, - SCM_FLAG_COLDBOOT_CPU2, - SCM_FLAG_COLDBOOT_CPU3, - }; - - for_each_present_cpu(cpu) { - map = cpu_logical_map(cpu); - if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) { - set_cpu_present(cpu, false); - continue; - } - flags |= cold_boot_flags[map]; - } + int cpu; - if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) { + if (qcom_scm_set_cold_boot_addr(secondary_startup_arm, + cpu_present_mask)) { for_each_present_cpu(cpu) { if (cpu == smp_processor_id()) continue; diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c deleted file mode 100644 index e8ff7beb621835a5ea05e206033d3a9261de0dfc..0000000000000000000000000000000000000000 --- a/arch/arm/mach-qcom/scm-boot.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include - -#include "scm.h" -#include "scm-boot.h" - -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -int scm_set_boot_addr(u32 addr, int flags) -{ - struct { - __le32 flags; - __le32 addr; - } cmd; - - cmd.addr = cpu_to_le32(addr); - cmd.flags = cpu_to_le32(flags); - return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} -EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h deleted file mode 100644 index 3e210fb818bba1748190564b9faf3f80bc0f4764..0000000000000000000000000000000000000000 --- a/arch/arm/mach-qcom/scm-boot.h +++ /dev/null @@ -1,26 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_BOOT_H -#define __MACH_SCM_BOOT_H - -#define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x01 -#define SCM_FLAG_COLDBOOT_CPU2 0x08 -#define SCM_FLAG_COLDBOOT_CPU3 0x20 -#define SCM_FLAG_WARMBOOT_CPU0 0x04 -#define SCM_FLAG_WARMBOOT_CPU1 0x02 -#define SCM_FLAG_WARMBOOT_CPU2 0x10 -#define SCM_FLAG_WARMBOOT_CPU3 0x40 - -int scm_set_boot_addr(u32 addr, int flags); - -#endif diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c deleted file mode 100644 index 1d9cf18c70916efcdd257d5f4931fce02b343e22..0000000000000000000000000000000000000000 --- a/arch/arm/mach-qcom/scm.c +++ /dev/null @@ -1,326 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "scm.h" - -#define SCM_ENOMEM -5 -#define SCM_EOPNOTSUPP -4 -#define SCM_EINVAL_ADDR -3 -#define SCM_EINVAL_ARG -2 -#define SCM_ERROR -1 -#define SCM_INTERRUPTED 1 - -static DEFINE_MUTEX(scm_lock); - -/** - * struct scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct scm_command - * | command header | - * ------------------- <--- scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct scm_response and - * | response header | scm_command_to_response() - * ------------------- <--- scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct scm_command { - __le32 len; - __le32 buf_offset; - __le32 resp_hdr_offset; - __le32 id; - __le32 buf[0]; -}; - -/** - * struct scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of scm_response - * @is_complete: indicates if the command has finished processing - */ -struct scm_response { - __le32 len; - __le32 buf_offset; - __le32 is_complete; -}; - -/** - * alloc_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &scm_command on success or %NULL if the allocation fails. - */ -static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) -{ - struct scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_scm_command(struct scm_command *cmd) -{ - kfree(cmd); -} - -/** - * scm_command_to_response() - Get a pointer to a scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct scm_response *scm_command_to_response( - const struct scm_command *cmd) -{ - return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); -} - -/** - * scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *scm_get_command_buffer(const struct scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *scm_get_response_buffer(const struct scm_response *rsp) -{ - return (void *)rsp + le32_to_cpu(rsp->buf_offset); -} - -static int scm_remap_error(int err) -{ - pr_err("scm_call failed with error code %d\n", err); - switch (err) { - case SCM_ERROR: - return -EIO; - case SCM_EINVAL_ADDR: - case SCM_EINVAL_ARG: - return -EINVAL; - case SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == SCM_INTERRUPTED); - - return r0; -} - -static int __scm_call(const struct scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - __cpuc_flush_dcache_area((void *)cmd, cmd->len); - outer_flush_range(cmd_addr, cmd_addr + cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = scm_remap_error(ret); - - return ret; -} - -static void scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - -/** - * scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - * - * A note on cache maintenance: - * Note that any buffers that are expected to be accessed by the secure world - * must be flushed before invoking scm_call and invalidated in the cache - * immediately after scm_call returns. Cache maintenance on the command and - * response buffers is taken care of by scm_call; however, callers are - * responsible for any other cached buffers passed over to the secure world. - */ -int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len) -{ - int ret; - struct scm_command *cmd; - struct scm_response *rsp; - unsigned long start, end; - - cmd = alloc_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); - if (cmd_buf) - memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&scm_lock); - ret = __scm_call(cmd); - mutex_unlock(&scm_lock); - if (ret) - goto out; - - rsp = scm_command_to_response(cmd); - start = (unsigned long)rsp; - - do { - scm_inv_range(start, start + sizeof(*rsp)); - } while (!rsp->is_complete); - - end = (unsigned long)scm_get_response_buffer(rsp) + resp_len; - scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); -out: - free_scm_command(cmd); - return ret; -} -EXPORT_SYMBOL(scm_call); - -u32 scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&scm_lock); - - return version; -} -EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h deleted file mode 100644 index 00b31ea58f299720f6c4d8cf36786ae582c20509..0000000000000000000000000000000000000000 --- a/arch/arm/mach-qcom/scm.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_SCM_H -#define __MACH_SCM_H - -#define SCM_SVC_BOOT 0x1 -#define SCM_SVC_PIL 0x2 - -extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len); - -#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) - -extern u32 scm_get_version(void); - -#endif diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 4be5379770407f75f501d98020478f6cb606f774..10f9389572da2e8a6fb9fb59824f3b8d3fea4c64 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -54,7 +54,7 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_DCSCB bool "Dual Cluster System Control Block (DCSCB) support" depends on MCPM - select ARM_CCI + select ARM_CCI400_PORT_CTRL help Support for the Dual Cluster System Configuration Block (DCSCB). This is needed to provide CPU and cluster power management @@ -72,7 +72,7 @@ config ARCH_VEXPRESS_SPC config ARCH_VEXPRESS_TC2_PM bool "Versatile Express TC2 power management" depends on MCPM - select ARM_CCI + select ARM_CCI400_PORT_CTRL select ARCH_VEXPRESS_SPC select ARM_CPU_SUSPEND help diff --git a/arch/arm64/include/asm/arm-cci.h b/arch/arm64/include/asm/arm-cci.h new file mode 100644 index 0000000000000000000000000000000000000000..f0b63712e10ecf219da6fc7ebeb34b02f381f1f2 --- /dev/null +++ b/arch/arm64/include/asm/arm-cci.h @@ -0,0 +1,27 @@ +/* + * arch/arm64/include/asm/arm-cci.h + * + * Copyright (C) 2015 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __ASM_ARM_CCI_H +#define __ASM_ARM_CCI_H + +static inline bool platform_has_secure_cci_access(void) +{ + return false; +} + +#endif diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index cbddbaddb34780dd1295f8ea22ceaaef16bd2f0f..a1d4af6df3f57a5e7de71bbdaa79bb5f271d0fef 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -4,6 +4,41 @@ menu "Bus devices" +config ARM_CCI + bool + +config ARM_CCI400_COMMON + bool + select ARM_CCI + +config ARM_CCI400_PMU + bool "ARM CCI400 PMU support" + default y + depends on ARM || ARM64 + depends on HW_PERF_EVENTS + select ARM_CCI400_COMMON + help + Support for PMU events monitoring on the ARM CCI cache coherent + interconnect. + + If unsure, say Y + +config ARM_CCI400_PORT_CTRL + bool + depends on ARM && OF && CPU_V7 + select ARM_CCI400_COMMON + help + Low level power management driver for CCI400 cache coherent + interconnect for ARM platforms. + +config ARM_CCN + bool "ARM CCN driver support" + depends on ARM || ARM64 + depends on PERF_EVENTS + help + PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) + interconnect. + config BRCMSTB_GISB_ARB bool "Broadcom STB GISB bus arbiter" depends on ARM || MIPS @@ -40,15 +75,6 @@ config MVEBU_MBUS Driver needed for the MBus configuration on Marvell EBU SoCs (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). -config OMAP_OCP2SCP - tristate "OMAP OCP2SCP DRIVER" - depends on ARCH_OMAP2PLUS - help - Driver to enable ocp2scp module which transforms ocp interface - protocol to scp protocol. In OMAP4, USB PHY is connected via - OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via - OCP2SCP. - config OMAP_INTERCONNECT tristate "OMAP INTERCONNECT DRIVER" depends on ARCH_OMAP2PLUS @@ -56,20 +82,27 @@ config OMAP_INTERCONNECT help Driver to enable OMAP interconnect error handling driver. -config ARM_CCI - bool "ARM CCI driver support" - depends on ARM && OF && CPU_V7 +config OMAP_OCP2SCP + tristate "OMAP OCP2SCP DRIVER" + depends on ARCH_OMAP2PLUS help - Driver supporting the CCI cache coherent interconnect for ARM - platforms. + Driver to enable ocp2scp module which transforms ocp interface + protocol to scp protocol. In OMAP4, USB PHY is connected via + OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via + OCP2SCP. -config ARM_CCN - bool "ARM CCN driver support" - depends on ARM || ARM64 - depends on PERF_EVENTS +config SIMPLE_PM_BUS + bool "Simple Power-Managed Bus Driver" + depends on OF && PM + depends on ARCH_SHMOBILE || COMPILE_TEST help - PMU (perf) driver supporting the ARM CCN (Cache Coherent Network) - interconnect. + Driver for transparent busses that don't need a real driver, but + where the bus controller is part of a PM domain, or under the control + of a functional clock, and thus relies on runtime PM for managing + this PM domain and/or clock. + An example of such a bus controller is the Renesas Bus State + Controller (BSC, sometimes called "LBSC within Bus Bridge", or + "External Bus Interface") as found on several Renesas ARM SoCs. config VEXPRESS_CONFIG bool "Versatile Express configuration bus" diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index 807dd17ef2f822ee98cc2e96916ffe55177f03ad..790e7b933fb2f9b2a266d43ecfec16620605fe2f 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -2,17 +2,18 @@ # Makefile for the bus drivers. # +# Interconnect bus drivers for ARM platforms +obj-$(CONFIG_ARM_CCI) += arm-cci.o +obj-$(CONFIG_ARM_CCN) += arm-ccn.o + obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o -obj-$(CONFIG_IMX_WEIM) += imx-weim.o -obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o -obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o -obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o +obj-$(CONFIG_IMX_WEIM) += imx-weim.o +obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o +obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o # Interconnect bus driver for OMAP SoCs. obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o -# Interconnect bus drivers for ARM platforms -obj-$(CONFIG_ARM_CCI) += arm-cci.o -obj-$(CONFIG_ARM_CCN) += arm-ccn.o - +obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o +obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 84fd66057dadf9e60b6c9ad04e535334265cda01..b854125e48311aa1e101c8ea9ab6ff0ec909753c 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -29,41 +29,36 @@ #include #include -#define DRIVER_NAME "CCI-400" -#define DRIVER_NAME_PMU DRIVER_NAME " PMU" - -#define CCI_PORT_CTRL 0x0 -#define CCI_CTRL_STATUS 0xc - -#define CCI_ENABLE_SNOOP_REQ 0x1 -#define CCI_ENABLE_DVM_REQ 0x2 -#define CCI_ENABLE_REQ (CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ) +static void __iomem *cci_ctrl_base; +static unsigned long cci_ctrl_phys; +#ifdef CONFIG_ARM_CCI400_PORT_CTRL struct cci_nb_ports { unsigned int nb_ace; unsigned int nb_ace_lite; }; -enum cci_ace_port_type { - ACE_INVALID_PORT = 0x0, - ACE_PORT, - ACE_LITE_PORT, +static const struct cci_nb_ports cci400_ports = { + .nb_ace = 2, + .nb_ace_lite = 3 }; -struct cci_ace_port { - void __iomem *base; - unsigned long phys; - enum cci_ace_port_type type; - struct device_node *dn; -}; +#define CCI400_PORTS_DATA (&cci400_ports) +#else +#define CCI400_PORTS_DATA (NULL) +#endif -static struct cci_ace_port *ports; -static unsigned int nb_cci_ports; +static const struct of_device_id arm_cci_matches[] = { +#ifdef CONFIG_ARM_CCI400_COMMON + {.compatible = "arm,cci-400", .data = CCI400_PORTS_DATA }, +#endif + {}, +}; -static void __iomem *cci_ctrl_base; -static unsigned long cci_ctrl_phys; +#ifdef CONFIG_ARM_CCI400_PMU -#ifdef CONFIG_HW_PERF_EVENTS +#define DRIVER_NAME "CCI-400" +#define DRIVER_NAME_PMU DRIVER_NAME " PMU" #define CCI_PMCR 0x0100 #define CCI_PID2 0x0fe8 @@ -75,20 +70,6 @@ static unsigned long cci_ctrl_phys; #define CCI_PID2_REV_MASK 0xf0 #define CCI_PID2_REV_SHIFT 4 -/* Port ids */ -#define CCI_PORT_S0 0 -#define CCI_PORT_S1 1 -#define CCI_PORT_S2 2 -#define CCI_PORT_S3 3 -#define CCI_PORT_S4 4 -#define CCI_PORT_M0 5 -#define CCI_PORT_M1 6 -#define CCI_PORT_M2 7 - -#define CCI_REV_R0 0 -#define CCI_REV_R1 1 -#define CCI_REV_R1_PX 5 - #define CCI_PMU_EVT_SEL 0x000 #define CCI_PMU_CNTR 0x004 #define CCI_PMU_CNTR_CTRL 0x008 @@ -100,76 +81,22 @@ static unsigned long cci_ctrl_phys; #define CCI_PMU_CNTR_MASK ((1ULL << 32) -1) -/* - * Instead of an event id to monitor CCI cycles, a dedicated counter is - * provided. Use 0xff to represent CCI cycles and hope that no future revisions - * make use of this event in hardware. - */ -enum cci400_perf_events { - CCI_PMU_CYCLES = 0xff -}; - -#define CCI_PMU_EVENT_MASK 0xff +#define CCI_PMU_EVENT_MASK 0xffUL #define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7) #define CCI_PMU_EVENT_CODE(event) (event & 0x1f) #define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */ -#define CCI_PMU_CYCLE_CNTR_IDX 0 -#define CCI_PMU_CNTR0_IDX 1 -#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1) - -/* - * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8 - * ports and bits 4:0 are event codes. There are different event codes - * associated with each port type. - * - * Additionally, the range of events associated with the port types changed - * between Rev0 and Rev1. - * - * The constants below define the range of valid codes for each port type for - * the different revisions and are used to validate the event to be monitored. - */ - -#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00 -#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13 -#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14 -#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a - -#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00 -#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14 -#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00 -#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11 - -struct pmu_port_event_ranges { - u8 slave_min; - u8 slave_max; - u8 master_min; - u8 master_max; -}; - -static struct pmu_port_event_ranges port_event_range[] = { - [CCI_REV_R0] = { - .slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV, - .slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV, - .master_min = CCI_REV_R0_MASTER_PORT_MIN_EV, - .master_max = CCI_REV_R0_MASTER_PORT_MAX_EV, - }, - [CCI_REV_R1] = { - .slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV, - .slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV, - .master_min = CCI_REV_R1_MASTER_PORT_MIN_EV, - .master_max = CCI_REV_R1_MASTER_PORT_MAX_EV, - }, +/* Types of interfaces that can generate events */ +enum { + CCI_IF_SLAVE, + CCI_IF_MASTER, + CCI_IF_MAX, }; -/* - * Export different PMU names for the different revisions so userspace knows - * because the event ids are different - */ -static char *const pmu_names[] = { - [CCI_REV_R0] = "CCI_400", - [CCI_REV_R1] = "CCI_400_r1", +struct event_range { + u32 min; + u32 max; }; struct cci_pmu_hw_events { @@ -178,13 +105,20 @@ struct cci_pmu_hw_events { raw_spinlock_t pmu_lock; }; +struct cci_pmu_model { + char *name; + struct event_range event_ranges[CCI_IF_MAX]; +}; + +static struct cci_pmu_model cci_pmu_models[]; + struct cci_pmu { void __iomem *base; struct pmu pmu; int nr_irqs; int irqs[CCI_PMU_MAX_HW_EVENTS]; unsigned long active_irqs; - struct pmu_port_event_ranges *port_ranges; + const struct cci_pmu_model *model; struct cci_pmu_hw_events hw_events; struct platform_device *plat_device; int num_events; @@ -196,52 +130,63 @@ static struct cci_pmu *pmu; #define to_cci_pmu(c) (container_of(c, struct cci_pmu, pmu)) -static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs) -{ - int i; - - for (i = 0; i < nr_irqs; i++) - if (irq == irqs[i]) - return true; - - return false; -} +/* Port ids */ +#define CCI_PORT_S0 0 +#define CCI_PORT_S1 1 +#define CCI_PORT_S2 2 +#define CCI_PORT_S3 3 +#define CCI_PORT_S4 4 +#define CCI_PORT_M0 5 +#define CCI_PORT_M1 6 +#define CCI_PORT_M2 7 -static int probe_cci_revision(void) -{ - int rev; - rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK; - rev >>= CCI_PID2_REV_SHIFT; +#define CCI_REV_R0 0 +#define CCI_REV_R1 1 +#define CCI_REV_R1_PX 5 - if (rev < CCI_REV_R1_PX) - return CCI_REV_R0; - else - return CCI_REV_R1; -} +/* + * Instead of an event id to monitor CCI cycles, a dedicated counter is + * provided. Use 0xff to represent CCI cycles and hope that no future revisions + * make use of this event in hardware. + */ +enum cci400_perf_events { + CCI_PMU_CYCLES = 0xff +}; -static struct pmu_port_event_ranges *port_range_by_rev(void) -{ - int rev = probe_cci_revision(); +#define CCI_PMU_CYCLE_CNTR_IDX 0 +#define CCI_PMU_CNTR0_IDX 1 +#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1) - return &port_event_range[rev]; -} +/* + * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8 + * ports and bits 4:0 are event codes. There are different event codes + * associated with each port type. + * + * Additionally, the range of events associated with the port types changed + * between Rev0 and Rev1. + * + * The constants below define the range of valid codes for each port type for + * the different revisions and are used to validate the event to be monitored. + */ -static int pmu_is_valid_slave_event(u8 ev_code) -{ - return pmu->port_ranges->slave_min <= ev_code && - ev_code <= pmu->port_ranges->slave_max; -} +#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00 +#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13 +#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14 +#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a -static int pmu_is_valid_master_event(u8 ev_code) -{ - return pmu->port_ranges->master_min <= ev_code && - ev_code <= pmu->port_ranges->master_max; -} +#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00 +#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14 +#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00 +#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11 -static int pmu_validate_hw_event(u8 hw_event) +static int pmu_validate_hw_event(unsigned long hw_event) { u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event); u8 ev_code = CCI_PMU_EVENT_CODE(hw_event); + int if_type; + + if (hw_event & ~CCI_PMU_EVENT_MASK) + return -ENOENT; switch (ev_source) { case CCI_PORT_S0: @@ -250,21 +195,44 @@ static int pmu_validate_hw_event(u8 hw_event) case CCI_PORT_S3: case CCI_PORT_S4: /* Slave Interface */ - if (pmu_is_valid_slave_event(ev_code)) - return hw_event; + if_type = CCI_IF_SLAVE; break; case CCI_PORT_M0: case CCI_PORT_M1: case CCI_PORT_M2: /* Master Interface */ - if (pmu_is_valid_master_event(ev_code)) - return hw_event; + if_type = CCI_IF_MASTER; break; + default: + return -ENOENT; } + if (ev_code >= pmu->model->event_ranges[if_type].min && + ev_code <= pmu->model->event_ranges[if_type].max) + return hw_event; + return -ENOENT; } +static int probe_cci_revision(void) +{ + int rev; + rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK; + rev >>= CCI_PID2_REV_SHIFT; + + if (rev < CCI_REV_R1_PX) + return CCI_REV_R0; + else + return CCI_REV_R1; +} + +static const struct cci_pmu_model *probe_cci_model(struct platform_device *pdev) +{ + if (platform_has_secure_cci_access()) + return &cci_pmu_models[probe_cci_revision()]; + return NULL; +} + static int pmu_is_valid_counter(struct cci_pmu *cci_pmu, int idx) { return CCI_PMU_CYCLE_CNTR_IDX <= idx && @@ -293,7 +261,6 @@ static void pmu_enable_counter(int idx) static void pmu_set_event(int idx, unsigned long event) { - event &= CCI_PMU_EVENT_MASK; pmu_write_register(event, idx, CCI_PMU_EVT_SEL); } @@ -310,7 +277,7 @@ static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *ev { struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu); struct hw_perf_event *hw_event = &event->hw; - unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK; + unsigned long cci_event = hw_event->config_base; int idx; if (cci_event == CCI_PMU_CYCLES) { @@ -331,7 +298,7 @@ static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *ev static int pmu_map_event(struct perf_event *event) { int mapping; - u8 config = event->attr.config & CCI_PMU_EVENT_MASK; + unsigned long config = event->attr.config; if (event->attr.type < PERF_TYPE_MAX) return -ENOENT; @@ -660,12 +627,21 @@ static void cci_pmu_del(struct perf_event *event, int flags) } static int -validate_event(struct cci_pmu_hw_events *hw_events, - struct perf_event *event) +validate_event(struct pmu *cci_pmu, + struct cci_pmu_hw_events *hw_events, + struct perf_event *event) { if (is_software_event(event)) return 1; + /* + * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The + * core perf code won't check that the pmu->ctx == leader->ctx + * until after pmu->event_init(event). + */ + if (event->pmu != cci_pmu) + return 0; + if (event->state < PERF_EVENT_STATE_OFF) return 1; @@ -687,15 +663,15 @@ validate_group(struct perf_event *event) .used_mask = CPU_BITS_NONE, }; - if (!validate_event(&fake_pmu, leader)) + if (!validate_event(event->pmu, &fake_pmu, leader)) return -EINVAL; list_for_each_entry(sibling, &leader->sibling_list, group_entry) { - if (!validate_event(&fake_pmu, sibling)) + if (!validate_event(event->pmu, &fake_pmu, sibling)) return -EINVAL; } - if (!validate_event(&fake_pmu, event)) + if (!validate_event(event->pmu, &fake_pmu, event)) return -EINVAL; return 0; @@ -831,9 +807,9 @@ static const struct attribute_group *pmu_attr_groups[] = { static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev) { - char *name = pmu_names[probe_cci_revision()]; + char *name = cci_pmu->model->name; cci_pmu->pmu = (struct pmu) { - .name = pmu_names[probe_cci_revision()], + .name = cci_pmu->model->name, .task_ctx_nr = perf_invalid_context, .pmu_enable = cci_pmu_enable, .pmu_disable = cci_pmu_disable, @@ -886,22 +862,93 @@ static struct notifier_block cci_pmu_cpu_nb = { .priority = CPU_PRI_PERF + 1, }; +static struct cci_pmu_model cci_pmu_models[] = { + [CCI_REV_R0] = { + .name = "CCI_400", + .event_ranges = { + [CCI_IF_SLAVE] = { + CCI_REV_R0_SLAVE_PORT_MIN_EV, + CCI_REV_R0_SLAVE_PORT_MAX_EV, + }, + [CCI_IF_MASTER] = { + CCI_REV_R0_MASTER_PORT_MIN_EV, + CCI_REV_R0_MASTER_PORT_MAX_EV, + }, + }, + }, + [CCI_REV_R1] = { + .name = "CCI_400_r1", + .event_ranges = { + [CCI_IF_SLAVE] = { + CCI_REV_R1_SLAVE_PORT_MIN_EV, + CCI_REV_R1_SLAVE_PORT_MAX_EV, + }, + [CCI_IF_MASTER] = { + CCI_REV_R1_MASTER_PORT_MIN_EV, + CCI_REV_R1_MASTER_PORT_MAX_EV, + }, + }, + }, +}; + static const struct of_device_id arm_cci_pmu_matches[] = { { .compatible = "arm,cci-400-pmu", + .data = NULL, + }, + { + .compatible = "arm,cci-400-pmu,r0", + .data = &cci_pmu_models[CCI_REV_R0], + }, + { + .compatible = "arm,cci-400-pmu,r1", + .data = &cci_pmu_models[CCI_REV_R1], }, {}, }; +static inline const struct cci_pmu_model *get_cci_model(struct platform_device *pdev) +{ + const struct of_device_id *match = of_match_node(arm_cci_pmu_matches, + pdev->dev.of_node); + if (!match) + return NULL; + if (match->data) + return match->data; + + dev_warn(&pdev->dev, "DEPRECATED compatible property," + "requires secure access to CCI registers"); + return probe_cci_model(pdev); +} + +static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) + if (irq == irqs[i]) + return true; + + return false; +} + static int cci_pmu_probe(struct platform_device *pdev) { struct resource *res; int i, ret, irq; + const struct cci_pmu_model *model; + + model = get_cci_model(pdev); + if (!model) { + dev_warn(&pdev->dev, "CCI PMU version not supported\n"); + return -ENODEV; + } pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL); if (!pmu) return -ENOMEM; + pmu->model = model; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pmu->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(pmu->base)) @@ -933,12 +980,6 @@ static int cci_pmu_probe(struct platform_device *pdev) return -EINVAL; } - pmu->port_ranges = port_range_by_rev(); - if (!pmu->port_ranges) { - dev_warn(&pdev->dev, "CCI PMU version not supported\n"); - return -EINVAL; - } - raw_spin_lock_init(&pmu->hw_events.pmu_lock); mutex_init(&pmu->reserve_mutex); atomic_set(&pmu->active_events, 0); @@ -952,6 +993,7 @@ static int cci_pmu_probe(struct platform_device *pdev) if (ret) return ret; + pr_info("ARM %s PMU driver probed", pmu->model->name); return 0; } @@ -963,7 +1005,66 @@ static int cci_platform_probe(struct platform_device *pdev) return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); } -#endif /* CONFIG_HW_PERF_EVENTS */ +static struct platform_driver cci_pmu_driver = { + .driver = { + .name = DRIVER_NAME_PMU, + .of_match_table = arm_cci_pmu_matches, + }, + .probe = cci_pmu_probe, +}; + +static struct platform_driver cci_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = arm_cci_matches, + }, + .probe = cci_platform_probe, +}; + +static int __init cci_platform_init(void) +{ + int ret; + + ret = platform_driver_register(&cci_pmu_driver); + if (ret) + return ret; + + return platform_driver_register(&cci_platform_driver); +} + +#else /* !CONFIG_ARM_CCI400_PMU */ + +static int __init cci_platform_init(void) +{ + return 0; +} + +#endif /* CONFIG_ARM_CCI400_PMU */ + +#ifdef CONFIG_ARM_CCI400_PORT_CTRL + +#define CCI_PORT_CTRL 0x0 +#define CCI_CTRL_STATUS 0xc + +#define CCI_ENABLE_SNOOP_REQ 0x1 +#define CCI_ENABLE_DVM_REQ 0x2 +#define CCI_ENABLE_REQ (CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ) + +enum cci_ace_port_type { + ACE_INVALID_PORT = 0x0, + ACE_PORT, + ACE_LITE_PORT, +}; + +struct cci_ace_port { + void __iomem *base; + unsigned long phys; + enum cci_ace_port_type type; + struct device_node *dn; +}; + +static struct cci_ace_port *ports; +static unsigned int nb_cci_ports; struct cpu_port { u64 mpidr; @@ -1284,36 +1385,20 @@ int notrace __cci_control_port_by_index(u32 port, bool enable) } EXPORT_SYMBOL_GPL(__cci_control_port_by_index); -static const struct cci_nb_ports cci400_ports = { - .nb_ace = 2, - .nb_ace_lite = 3 -}; - -static const struct of_device_id arm_cci_matches[] = { - {.compatible = "arm,cci-400", .data = &cci400_ports }, - {}, -}; - static const struct of_device_id arm_cci_ctrl_if_matches[] = { {.compatible = "arm,cci-400-ctrl-if", }, {}, }; -static int cci_probe(void) +static int cci_probe_ports(struct device_node *np) { struct cci_nb_ports const *cci_config; int ret, i, nb_ace = 0, nb_ace_lite = 0; - struct device_node *np, *cp; + struct device_node *cp; struct resource res; const char *match_str; bool is_ace; - np = of_find_matching_node(NULL, arm_cci_matches); - if (!np) - return -ENODEV; - - if (!of_device_is_available(np)) - return -ENODEV; cci_config = of_match_node(arm_cci_matches, np)->data; if (!cci_config) @@ -1325,17 +1410,6 @@ static int cci_probe(void) if (!ports) return -ENOMEM; - ret = of_address_to_resource(np, 0, &res); - if (!ret) { - cci_ctrl_base = ioremap(res.start, resource_size(&res)); - cci_ctrl_phys = res.start; - } - if (ret || !cci_ctrl_base) { - WARN(1, "unable to ioremap CCI ctrl\n"); - ret = -ENXIO; - goto memalloc_err; - } - for_each_child_of_node(np, cp) { if (!of_match_node(arm_cci_ctrl_if_matches, cp)) continue; @@ -1395,12 +1469,37 @@ static int cci_probe(void) sync_cache_w(&cpu_port); __sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports); pr_info("ARM CCI driver probed\n"); + return 0; +} +#else /* !CONFIG_ARM_CCI400_PORT_CTRL */ +static inline int cci_probe_ports(struct device_node *np) +{ + return 0; +} +#endif /* CONFIG_ARM_CCI400_PORT_CTRL */ -memalloc_err: +static int cci_probe(void) +{ + int ret; + struct device_node *np; + struct resource res; + + np = of_find_matching_node(NULL, arm_cci_matches); + if(!np || !of_device_is_available(np)) + return -ENODEV; - kfree(ports); - return ret; + ret = of_address_to_resource(np, 0, &res); + if (!ret) { + cci_ctrl_base = ioremap(res.start, resource_size(&res)); + cci_ctrl_phys = res.start; + } + if (ret || !cci_ctrl_base) { + WARN(1, "unable to ioremap CCI ctrl\n"); + return -ENXIO; + } + + return cci_probe_ports(np); } static int cci_init_status = -EAGAIN; @@ -1418,42 +1517,6 @@ static int cci_init(void) return cci_init_status; } -#ifdef CONFIG_HW_PERF_EVENTS -static struct platform_driver cci_pmu_driver = { - .driver = { - .name = DRIVER_NAME_PMU, - .of_match_table = arm_cci_pmu_matches, - }, - .probe = cci_pmu_probe, -}; - -static struct platform_driver cci_platform_driver = { - .driver = { - .name = DRIVER_NAME, - .of_match_table = arm_cci_matches, - }, - .probe = cci_platform_probe, -}; - -static int __init cci_platform_init(void) -{ - int ret; - - ret = platform_driver_register(&cci_pmu_driver); - if (ret) - return ret; - - return platform_driver_register(&cci_platform_driver); -} - -#else - -static int __init cci_platform_init(void) -{ - return 0; -} - -#endif /* * To sort out early init calls ordering a helper function is provided to * check if the CCI driver has beed initialized. Function check if the driver diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c new file mode 100644 index 0000000000000000000000000000000000000000..c5eb46cbf388b507608f96ed1b55082d42d54981 --- /dev/null +++ b/drivers/bus/simple-pm-bus.c @@ -0,0 +1,58 @@ +/* + * Simple Power-Managed Bus Driver + * + * Copyright (C) 2014-2015 Glider bvba + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include + + +static int simple_pm_bus_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + pm_runtime_enable(&pdev->dev); + + if (np) + of_platform_populate(np, NULL, NULL, &pdev->dev); + + return 0; +} + +static int simple_pm_bus_remove(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "%s\n", __func__); + + pm_runtime_disable(&pdev->dev); + return 0; +} + +static const struct of_device_id simple_pm_bus_of_match[] = { + { .compatible = "simple-pm-bus", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match); + +static struct platform_driver simple_pm_bus_driver = { + .probe = simple_pm_bus_probe, + .remove = simple_pm_bus_remove, + .driver = { + .name = "simple-pm-bus", + .of_match_table = simple_pm_bus_of_match, + }, +}; + +module_platform_driver(simple_pm_bus_driver); + +MODULE_DESCRIPTION("Simple Power-Managed Bus Driver"); +MODULE_AUTHOR("Geert Uytterhoeven "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index b4ac7cfae4418d3ed904db7e697078ffa00cab86..51d7865fdddb6d59ae7a9406ae8d88cb4da30066 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -143,6 +143,11 @@ config ATMEL_PIT select CLKSRC_OF if OF def_bool SOC_AT91SAM9 || SOC_SAMA5 +config ATMEL_ST + bool + select CLKSRC_OF + select MFD_SYSCON + config CLKSRC_METAG_GENERIC def_bool y if METAG help diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 752d5c70b0ef5d57eda8b8219e3f9c93ac4240c7..5b85f6adb25834c807c24aafa08ed0529b2e8a53 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o +obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/drivers/clocksource/timer-atmel-st.c similarity index 73% rename from arch/arm/mach-at91/at91rm9200_time.c rename to drivers/clocksource/timer-atmel-st.c index b00d09555f2b7662cb3262ace823a11ccb3fd5e5..1692e17e096bfd3ae9dd541ba4a11d2a4020fbb6 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/drivers/clocksource/timer-atmel-st.c @@ -24,19 +24,17 @@ #include #include #include -#include -#include +#include +#include #include - -#include - -#include -#include +#include static unsigned long last_crtr; static u32 irqmask; static struct clock_event_device clkevt; +static struct regmap *regmap_st; +#define AT91_SLOW_CLOCK 32768 #define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ) /* @@ -46,11 +44,11 @@ static struct clock_event_device clkevt; */ static inline unsigned long read_CRTR(void) { - unsigned long x1, x2; + unsigned int x1, x2; - x1 = at91_st_read(AT91_ST_CRTR); + regmap_read(regmap_st, AT91_ST_CRTR, &x1); do { - x2 = at91_st_read(AT91_ST_CRTR); + regmap_read(regmap_st, AT91_ST_CRTR, &x2); if (x1 == x2) break; x1 = x2; @@ -63,7 +61,10 @@ static inline unsigned long read_CRTR(void) */ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) { - u32 sr = at91_st_read(AT91_ST_SR) & irqmask; + u32 sr; + + regmap_read(regmap_st, AT91_ST_SR, &sr); + sr &= irqmask; /* * irqs should be disabled here, but as the irq is shared they are only @@ -92,13 +93,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static struct irqaction at91rm9200_timer_irq = { - .name = "at91_tick", - .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt, - .irq = NR_IRQS_LEGACY + AT91_ID_SYS, -}; - static cycle_t read_clk32k(struct clocksource *cs) { return read_CRTR(); @@ -115,23 +109,25 @@ static struct clocksource clk32k = { static void clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) { + unsigned int val; + /* Disable and flush pending timer interrupts */ - at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); - at91_st_read(AT91_ST_SR); + regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS); + regmap_read(regmap_st, AT91_ST_SR, &val); last_crtr = read_CRTR(); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: /* PIT for periodic irqs; fixed rate of 1/HZ */ irqmask = AT91_ST_PITS; - at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH); + regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH); break; case CLOCK_EVT_MODE_ONESHOT: /* ALM for oneshot irqs, set by next_event() * before 32 seconds have passed */ irqmask = AT91_ST_ALMS; - at91_st_write(AT91_ST_RTAR, last_crtr); + regmap_write(regmap_st, AT91_ST_RTAR, last_crtr); break; case CLOCK_EVT_MODE_SHUTDOWN: case CLOCK_EVT_MODE_UNUSED: @@ -139,7 +135,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev) irqmask = 0; break; } - at91_st_write(AT91_ST_IER, irqmask); + regmap_write(regmap_st, AT91_ST_IER, irqmask); } static int @@ -147,6 +143,7 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) { u32 alm; int status = 0; + unsigned int val; BUG_ON(delta < 2); @@ -162,12 +159,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) alm = read_CRTR(); /* Cancel any pending alarm; flush any pending IRQ */ - at91_st_write(AT91_ST_RTAR, alm); - at91_st_read(AT91_ST_SR); + regmap_write(regmap_st, AT91_ST_RTAR, alm); + regmap_read(regmap_st, AT91_ST_SR, &val); /* Schedule alarm by writing RTAR. */ alm += delta; - at91_st_write(AT91_ST_RTAR, alm); + regmap_write(regmap_st, AT91_ST_RTAR, alm); return status; } @@ -180,66 +177,40 @@ static struct clock_event_device clkevt = { .set_mode = clkevt32k_mode, }; -void __iomem *at91_st_base; -EXPORT_SYMBOL_GPL(at91_st_base); - -static const struct of_device_id at91rm9200_st_timer_ids[] = { - { .compatible = "atmel,at91rm9200-st" }, - { /* sentinel */ } -}; - -static int __init of_at91rm9200_st_init(void) -{ - struct device_node *np; - int ret; - - np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); - if (!np) - goto err; - - at91_st_base = of_iomap(np, 0); - if (!at91_st_base) - goto node_err; - - /* Get the interrupts property */ - ret = irq_of_parse_and_map(np, 0); - if (!ret) - goto ioremap_err; - at91rm9200_timer_irq.irq = ret; - - of_node_put(np); - - return 0; - -ioremap_err: - iounmap(at91_st_base); -node_err: - of_node_put(np); -err: - return -EINVAL; -} - /* * ST (system timer) module supports both clockevents and clocksource. */ -void __init at91rm9200_timer_init(void) +static void __init atmel_st_timer_init(struct device_node *node) { - /* For device tree enabled device: initialize here */ - of_at91rm9200_st_init(); + unsigned int val; + int irq, ret; + + regmap_st = syscon_node_to_regmap(node); + if (IS_ERR(regmap_st)) + panic(pr_fmt("Unable to get regmap\n")); /* Disable all timer interrupts, and clear any pending ones */ - at91_st_write(AT91_ST_IDR, + regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); - at91_st_read(AT91_ST_SR); + regmap_read(regmap_st, AT91_ST_SR, &val); + + /* Get the interrupts property */ + irq = irq_of_parse_and_map(node, 0); + if (!irq) + panic(pr_fmt("Unable to get IRQ from DT\n")); /* Make IRQs happen for the system timer */ - setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); + ret = request_irq(irq, at91rm9200_timer_interrupt, + IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL, + "at91_tick", regmap_st); + if (ret) + panic(pr_fmt("Unable to setup IRQ\n")); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting * its prescaler from the 1 Hz default. */ - at91_st_write(AT91_ST_RTMR, 1); + regmap_write(regmap_st, AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ clkevt.cpumask = cpumask_of(0); @@ -249,3 +220,5 @@ void __init at91rm9200_timer_init(void) /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); } +CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st", + atmel_st_timer_init); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 41983883cef47da740612a9966d39ec97094d593..6517132e5d8b5900baebcbc4620e10dbb4a876e0 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -132,6 +132,10 @@ config ISCSI_IBFT detect iSCSI boot parameters dynamically during system boot, say Y. Otherwise, say N. +config QCOM_SCM + bool + depends on ARM || ARM64 + source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 5373dc5b60114f31af5cf66cdbb923bdc6b0f973..3fdd3912709af54950f84f7f2dacb1e9a5aee366 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID) += dmi-id.o obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o +obj-$(CONFIG_QCOM_SCM) += qcom_scm.o +CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c new file mode 100644 index 0000000000000000000000000000000000000000..994b50fd997c5eb0f4583e6c917a34b5752e7e70 --- /dev/null +++ b/drivers/firmware/qcom_scm.c @@ -0,0 +1,494 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +#define QCOM_SCM_ENOMEM -5 +#define QCOM_SCM_EOPNOTSUPP -4 +#define QCOM_SCM_EINVAL_ADDR -3 +#define QCOM_SCM_EINVAL_ARG -2 +#define QCOM_SCM_ERROR -1 +#define QCOM_SCM_INTERRUPTED 1 + +#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00 +#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 +#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 + +#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 +#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 +#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 + +struct qcom_scm_entry { + int flag; + void *entry; +}; + +static struct qcom_scm_entry qcom_scm_wb[] = { + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 }, +}; + +static DEFINE_MUTEX(qcom_scm_lock); + +/** + * struct qcom_scm_command - one SCM command buffer + * @len: total available memory for command and response + * @buf_offset: start of command buffer + * @resp_hdr_offset: start of response buffer + * @id: command to be executed + * @buf: buffer returned from qcom_scm_get_command_buffer() + * + * An SCM command is laid out in memory as follows: + * + * ------------------- <--- struct qcom_scm_command + * | command header | + * ------------------- <--- qcom_scm_get_command_buffer() + * | command buffer | + * ------------------- <--- struct qcom_scm_response and + * | response header | qcom_scm_command_to_response() + * ------------------- <--- qcom_scm_get_response_buffer() + * | response buffer | + * ------------------- + * + * There can be arbitrary padding between the headers and buffers so + * you should always use the appropriate qcom_scm_get_*_buffer() routines + * to access the buffers in a safe manner. + */ +struct qcom_scm_command { + __le32 len; + __le32 buf_offset; + __le32 resp_hdr_offset; + __le32 id; + __le32 buf[0]; +}; + +/** + * struct qcom_scm_response - one SCM response buffer + * @len: total available memory for response + * @buf_offset: start of response data relative to start of qcom_scm_response + * @is_complete: indicates if the command has finished processing + */ +struct qcom_scm_response { + __le32 len; + __le32 buf_offset; + __le32 is_complete; +}; + +/** + * alloc_qcom_scm_command() - Allocate an SCM command + * @cmd_size: size of the command buffer + * @resp_size: size of the response buffer + * + * Allocate an SCM command, including enough room for the command + * and response headers as well as the command and response buffers. + * + * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. + */ +static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) +{ + struct qcom_scm_command *cmd; + size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + + resp_size; + u32 offset; + + cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); + if (cmd) { + cmd->len = cpu_to_le32(len); + offset = offsetof(struct qcom_scm_command, buf); + cmd->buf_offset = cpu_to_le32(offset); + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); + } + return cmd; +} + +/** + * free_qcom_scm_command() - Free an SCM command + * @cmd: command to free + * + * Free an SCM command. + */ +static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) +{ + kfree(cmd); +} + +/** + * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response + * @cmd: command + * + * Returns a pointer to a response for a command. + */ +static inline struct qcom_scm_response *qcom_scm_command_to_response( + const struct qcom_scm_command *cmd) +{ + return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); +} + +/** + * qcom_scm_get_command_buffer() - Get a pointer to a command buffer + * @cmd: command + * + * Returns a pointer to the command buffer of a command. + */ +static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd) +{ + return (void *)cmd->buf; +} + +/** + * qcom_scm_get_response_buffer() - Get a pointer to a response buffer + * @rsp: response + * + * Returns a pointer to a response buffer of a response. + */ +static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp) +{ + return (void *)rsp + le32_to_cpu(rsp->buf_offset); +} + +static int qcom_scm_remap_error(int err) +{ + pr_err("qcom_scm_call failed with error code %d\n", err); + switch (err) { + case QCOM_SCM_ERROR: + return -EIO; + case QCOM_SCM_EINVAL_ADDR: + case QCOM_SCM_EINVAL_ARG: + return -EINVAL; + case QCOM_SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case QCOM_SCM_ENOMEM: + return -ENOMEM; + } + return -EINVAL; +} + +static u32 smc(u32 cmd_addr) +{ + int context_id; + register u32 r0 asm("r0") = 1; + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = cmd_addr; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + return r0; +} + +static int __qcom_scm_call(const struct qcom_scm_command *cmd) +{ + int ret; + u32 cmd_addr = virt_to_phys(cmd); + + /* + * Flush the command buffer so that the secure world sees + * the correct data. + */ + __cpuc_flush_dcache_area((void *)cmd, cmd->len); + outer_flush_range(cmd_addr, cmd_addr + cmd->len); + + ret = smc(cmd_addr); + if (ret < 0) + ret = qcom_scm_remap_error(ret); + + return ret; +} + +static void qcom_scm_inv_range(unsigned long start, unsigned long end) +{ + u32 cacheline_size, ctr; + + asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); + cacheline_size = 4 << ((ctr >> 16) & 0xf); + + start = round_down(start, cacheline_size); + end = round_up(end, cacheline_size); + outer_inv_range(start, end); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += cacheline_size; + } + dsb(); + isb(); +} + +/** + * qcom_scm_call() - Send an SCM command + * @svc_id: service identifier + * @cmd_id: command identifier + * @cmd_buf: command buffer + * @cmd_len: length of the command buffer + * @resp_buf: response buffer + * @resp_len: length of the response buffer + * + * Sends a command to the SCM and waits for the command to finish processing. + * + * A note on cache maintenance: + * Note that any buffers that are expected to be accessed by the secure world + * must be flushed before invoking qcom_scm_call and invalidated in the cache + * immediately after qcom_scm_call returns. Cache maintenance on the command + * and response buffers is taken care of by qcom_scm_call; however, callers are + * responsible for any other cached buffers passed over to the secure world. + */ +static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, + size_t cmd_len, void *resp_buf, size_t resp_len) +{ + int ret; + struct qcom_scm_command *cmd; + struct qcom_scm_response *rsp; + unsigned long start, end; + + cmd = alloc_qcom_scm_command(cmd_len, resp_len); + if (!cmd) + return -ENOMEM; + + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); + if (cmd_buf) + memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + + mutex_lock(&qcom_scm_lock); + ret = __qcom_scm_call(cmd); + mutex_unlock(&qcom_scm_lock); + if (ret) + goto out; + + rsp = qcom_scm_command_to_response(cmd); + start = (unsigned long)rsp; + + do { + qcom_scm_inv_range(start, start + sizeof(*rsp)); + } while (!rsp->is_complete); + + end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; + qcom_scm_inv_range(start, end); + + if (resp_buf) + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); +out: + free_qcom_scm_command(cmd); + return ret; +} + +#define SCM_CLASS_REGISTER (0x2 << 8) +#define SCM_MASK_IRQS BIT(5) +#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \ + SCM_CLASS_REGISTER | \ + SCM_MASK_IRQS | \ + (n & 0xf)) + +/** + * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument + * @svc_id: service identifier + * @cmd_id: command identifier + * @arg1: first argument + * + * This shall only be used with commands that are guaranteed to be + * uninterruptable, atomic and SMP safe. + */ +static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) +{ + int context_id; + + register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1); + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = arg1; + + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + return r0; +} + +u32 qcom_scm_get_version(void) +{ + int context_id; + static u32 version = -1; + register u32 r0 asm("r0"); + register u32 r1 asm("r1"); + + if (version != -1) + return version; + + mutex_lock(&qcom_scm_lock); + + r0 = 0x1 << 8; + r1 = (u32)&context_id; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r0") + __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0), "=r" (r1) + : "r" (r0), "r" (r1) + : "r2", "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + version = r1; + mutex_unlock(&qcom_scm_lock); + + return version; +} +EXPORT_SYMBOL(qcom_scm_get_version); + +#define QCOM_SCM_SVC_BOOT 0x1 +#define QCOM_SCM_BOOT_ADDR 0x1 +/* + * Set the cold/warm boot address for one of the CPU cores. + */ +static int qcom_scm_set_boot_addr(u32 addr, int flags) +{ + struct { + __le32 flags; + __le32 addr; + } cmd; + + cmd.addr = cpu_to_le32(addr); + cmd.flags = cpu_to_le32(flags); + return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); +} + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the cold boot address of the cpus. Any cpu outside the supported + * range would be removed from the cpu present mask. + */ +int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +{ + int flags = 0; + int cpu; + int scm_cb_flags[] = { + QCOM_SCM_FLAG_COLDBOOT_CPU0, + QCOM_SCM_FLAG_COLDBOOT_CPU1, + QCOM_SCM_FLAG_COLDBOOT_CPU2, + QCOM_SCM_FLAG_COLDBOOT_CPU3, + }; + + if (!cpus || (cpus && cpumask_empty(cpus))) + return -EINVAL; + + for_each_cpu(cpu, cpus) { + if (cpu < ARRAY_SIZE(scm_cb_flags)) + flags |= scm_cb_flags[cpu]; + else + set_cpu_present(cpu, false); + } + + return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); +} +EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +{ + int ret; + int flags = 0; + int cpu; + + /* + * Reassign only if we are switching from hotplug entry point + * to cpuidle entry point or vice versa. + */ + for_each_cpu(cpu, cpus) { + if (entry == qcom_scm_wb[cpu].entry) + continue; + flags |= qcom_scm_wb[cpu].flag; + } + + /* No change in entry function */ + if (!flags) + return 0; + + ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + if (!ret) { + for_each_cpu(cpu, cpus) + qcom_scm_wb[cpu].entry = entry; + } + + return ret; +} +EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); + +#define QCOM_SCM_CMD_TERMINATE_PC 0x2 +#define QCOM_SCM_FLUSH_FLAG_MASK 0x3 + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags - Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void qcom_scm_cpu_power_down(u32 flags) +{ + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, + flags & QCOM_SCM_FLUSH_FLAG_MASK); +} +EXPORT_SYMBOL(qcom_scm_cpu_power_down); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index 24696f59215b6b819b44b92719c86afa381fec2e..c94ea0d687467f176e19d44dae06ebe0efaef899 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -12,8 +12,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#undef DEBUG - #include #include #include @@ -29,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -136,13 +135,21 @@ #define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) #define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27) #define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25) +/** CLKACTIVATIONTIME Max Ticks */ +#define GPMC_CONFIG1_CLKACTIVATIONTIME_MAX 2 #define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23) +/** ATTACHEDDEVICEPAGELENGTH Max Value */ +#define GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX 2 #define GPMC_CONFIG1_WAIT_READ_MON (1 << 22) #define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21) -#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18) +#define GPMC_CONFIG1_WAIT_MON_TIME(val) ((val & 3) << 18) +/** WAITMONITORINGTIME Max Ticks */ +#define GPMC_CONFIG1_WAITMONITORINGTIME_MAX 2 #define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16) #define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12) #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) +/** DEVICESIZE Max Value */ +#define GPMC_CONFIG1_DEVICESIZE_MAX 1 #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) #define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) @@ -153,6 +160,15 @@ #define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) #define GPMC_CONFIG7_CSVALID (1 << 6) +#define GPMC_CONFIG7_BASEADDRESS_MASK 0x3f +#define GPMC_CONFIG7_CSVALID_MASK BIT(6) +#define GPMC_CONFIG7_MASKADDRESS_OFFSET 8 +#define GPMC_CONFIG7_MASKADDRESS_MASK (0xf << GPMC_CONFIG7_MASKADDRESS_OFFSET) +/* All CONFIG7 bits except reserved bits */ +#define GPMC_CONFIG7_MASK (GPMC_CONFIG7_BASEADDRESS_MASK | \ + GPMC_CONFIG7_CSVALID_MASK | \ + GPMC_CONFIG7_MASKADDRESS_MASK) + #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 @@ -169,6 +185,11 @@ */ #define GPMC_NR_IRQ 2 +enum gpmc_clk_domain { + GPMC_CD_FCLK, + GPMC_CD_CLK +}; + struct gpmc_cs_data { const char *name; @@ -267,16 +288,55 @@ static unsigned long gpmc_get_fclk_period(void) return rate; } -static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +/** + * gpmc_get_clk_period - get period of selected clock domain in ps + * @cs Chip Select Region. + * @cd Clock Domain. + * + * GPMC_CS_CONFIG1 GPMCFCLKDIVIDER for cs has to be setup + * prior to calling this function with GPMC_CD_CLK. + */ +static unsigned long gpmc_get_clk_period(int cs, enum gpmc_clk_domain cd) +{ + + unsigned long tick_ps = gpmc_get_fclk_period(); + u32 l; + int div; + + switch (cd) { + case GPMC_CD_CLK: + /* get current clk divider */ + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + div = (l & 0x03) + 1; + /* get GPMC_CLK period */ + tick_ps *= div; + break; + case GPMC_CD_FCLK: + /* FALL-THROUGH */ + default: + break; + } + + return tick_ps; + +} + +static unsigned int gpmc_ns_to_clk_ticks(unsigned int time_ns, int cs, + enum gpmc_clk_domain cd) { unsigned long tick_ps; /* Calculate in picosecs to yield more exact results */ - tick_ps = gpmc_get_fclk_period(); + tick_ps = gpmc_get_clk_period(cs, cd); return (time_ns * 1000 + tick_ps - 1) / tick_ps; } +static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +{ + return gpmc_ns_to_clk_ticks(time_ns, /* any CS */ 0, GPMC_CD_FCLK); +} + static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) { unsigned long tick_ps; @@ -287,9 +347,15 @@ static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) return (time_ps + tick_ps - 1) / tick_ps; } +unsigned int gpmc_clk_ticks_to_ns(unsigned ticks, int cs, + enum gpmc_clk_domain cd) +{ + return ticks * gpmc_get_clk_period(cs, cd) / 1000; +} + unsigned int gpmc_ticks_to_ns(unsigned int ticks) { - return ticks * gpmc_get_fclk_period() / 1000; + return gpmc_clk_ticks_to_ns(ticks, /* any CS */ 0, GPMC_CD_FCLK); } static unsigned int gpmc_ticks_to_ps(unsigned int ticks) @@ -338,33 +404,66 @@ static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p) } #ifdef DEBUG -static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, - bool raw, bool noval, int shift, - const char *name) +/** + * get_gpmc_timing_reg - read a timing parameter and print DTS settings for it. + * @cs: Chip Select Region + * @reg: GPMC_CS_CONFIGn register offset. + * @st_bit: Start Bit + * @end_bit: End Bit. Must be >= @st_bit. + * @ma:x Maximum parameter value (before optional @shift). + * If 0, maximum is as high as @st_bit and @end_bit allow. + * @name: DTS node name, w/o "gpmc," + * @cd: Clock Domain of timing parameter. + * @shift: Parameter value left shifts @shift, which is then printed instead of value. + * @raw: Raw Format Option. + * raw format: gpmc,name = + * tick format: gpmc,name = /‍* x ns -- y ns; x ticks *‍/ + * Where x ns -- y ns result in the same tick value. + * When @max is exceeded, "invalid" is printed inside comment. + * @noval: Parameter values equal to 0 are not printed. + * @return: Specified timing parameter (after optional @shift). + * + */ +static int get_gpmc_timing_reg( + /* timing specifiers */ + int cs, int reg, int st_bit, int end_bit, int max, + const char *name, const enum gpmc_clk_domain cd, + /* value transform */ + int shift, + /* format specifiers */ + bool raw, bool noval) { u32 l; - int nr_bits, max_value, mask; + int nr_bits; + int mask; + bool invalid; l = gpmc_cs_read_reg(cs, reg); nr_bits = end_bit - st_bit + 1; - max_value = (1 << nr_bits) - 1; - mask = max_value << st_bit; - l = (l & mask) >> st_bit; + mask = (1 << nr_bits) - 1; + l = (l >> st_bit) & mask; + if (!max) + max = mask; + invalid = l > max; if (shift) l = (shift << l); if (noval && (l == 0)) return 0; if (!raw) { - unsigned int time_ns_min, time_ns, time_ns_max; - - time_ns_min = gpmc_ticks_to_ns(l ? l - 1 : 0); - time_ns = gpmc_ticks_to_ns(l); - time_ns_max = gpmc_ticks_to_ns(l + 1 > max_value ? - max_value : l + 1); - pr_info("gpmc,%s = <%u> (%u - %u ns, %i ticks)\n", - name, time_ns, time_ns_min, time_ns_max, l); + /* DTS tick format for timings in ns */ + unsigned int time_ns; + unsigned int time_ns_min = 0; + + if (l) + time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1; + time_ns = gpmc_clk_ticks_to_ns(l, cs, cd); + pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n", + name, time_ns, time_ns_min, time_ns, l, + invalid ? "; invalid " : " "); } else { - pr_info("gpmc,%s = <%u>\n", name, l); + /* raw format */ + pr_info("gpmc,%s = <%u>%s\n", name, l, + invalid ? " /* invalid */" : ""); } return l; @@ -374,13 +473,19 @@ static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, pr_info("cs%i %s: 0x%08x\n", cs, #config, \ gpmc_cs_read_reg(cs, config)) #define GPMC_GET_RAW(reg, st, end, field) \ - get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 0, 0, field) + get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 0) +#define GPMC_GET_RAW_MAX(reg, st, end, max, field) \ + get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, 0, 1, 0) #define GPMC_GET_RAW_BOOL(reg, st, end, field) \ - get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, 0, field) -#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \ - get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, (shift), field) + get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 1, 1) +#define GPMC_GET_RAW_SHIFT_MAX(reg, st, end, shift, max, field) \ + get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, GPMC_CD_FCLK, (shift), 1, 1) #define GPMC_GET_TICKS(reg, st, end, field) \ - get_gpmc_timing_reg(cs, (reg), (st), (end), 0, 0, 0, field) + get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, GPMC_CD_FCLK, 0, 0, 0) +#define GPMC_GET_TICKS_CD(reg, st, end, field, cd) \ + get_gpmc_timing_reg(cs, (reg), (st), (end), 0, field, (cd), 0, 0, 0) +#define GPMC_GET_TICKS_CD_MAX(reg, st, end, max, field, cd) \ + get_gpmc_timing_reg(cs, (reg), (st), (end), (max), field, (cd), 0, 0, 0) static void gpmc_show_regs(int cs, const char *desc) { @@ -404,11 +509,14 @@ static void gpmc_cs_show_timings(int cs, const char *desc) pr_info("gpmc cs%i access configuration:\n", cs); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data"); - GPMC_GET_RAW(GPMC_CS_CONFIG1, 12, 13, "device-width"); + GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13, + GPMC_CONFIG1_DEVICESIZE_MAX, "device-width"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 22, 22, "wait-on-read"); - GPMC_GET_RAW_SHIFT(GPMC_CS_CONFIG1, 23, 24, 4, "burst-length"); + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 23, 24, 4, + GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX, + "burst-length"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 27, 27, "sync-write"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 28, 28, "burst-write"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 29, 29, "gpmc,sync-read"); @@ -448,8 +556,12 @@ static void gpmc_cs_show_timings(int cs, const char *desc) GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns"); GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns"); - GPMC_GET_TICKS(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns"); - GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns"); + GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 18, 19, + GPMC_CONFIG1_WAITMONITORINGTIME_MAX, + "wait-monitoring-ns", GPMC_CD_CLK); + GPMC_GET_TICKS_CD_MAX(GPMC_CS_CONFIG1, 25, 26, + GPMC_CONFIG1_CLKACTIVATIONTIME_MAX, + "clk-activation-ns", GPMC_CD_FCLK); GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns"); GPMC_GET_TICKS(GPMC_CS_CONFIG6, 24, 28, "wr-access-ns"); @@ -460,8 +572,24 @@ static inline void gpmc_cs_show_timings(int cs, const char *desc) } #endif -static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, - int time, const char *name) +/** + * set_gpmc_timing_reg - set a single timing parameter for Chip Select Region. + * Caller is expected to have initialized CONFIG1 GPMCFCLKDIVIDER + * prior to calling this function with @cd equal to GPMC_CD_CLK. + * + * @cs: Chip Select Region. + * @reg: GPMC_CS_CONFIGn register offset. + * @st_bit: Start Bit + * @end_bit: End Bit. Must be >= @st_bit. + * @max: Maximum parameter value. + * If 0, maximum is as high as @st_bit and @end_bit allow. + * @time: Timing parameter in ns. + * @cd: Timing parameter clock domain. + * @name: Timing parameter name. + * @return: 0 on success, -1 on error. + */ +static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int max, + int time, enum gpmc_clk_domain cd, const char *name) { u32 l; int ticks, mask, nr_bits; @@ -469,22 +597,25 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, if (time == 0) ticks = 0; else - ticks = gpmc_ns_to_ticks(time); + ticks = gpmc_ns_to_clk_ticks(time, cs, cd); nr_bits = end_bit - st_bit + 1; mask = (1 << nr_bits) - 1; - if (ticks > mask) { - pr_err("%s: GPMC error! CS%d: %s: %d ns, %d ticks > %d\n", - __func__, cs, name, time, ticks, mask); + if (!max) + max = mask; + + if (ticks > max) { + pr_err("%s: GPMC CS%d: %s %d ns, %d ticks > %d ticks\n", + __func__, cs, name, time, ticks, max); return -1; } l = gpmc_cs_read_reg(cs, reg); #ifdef DEBUG - printk(KERN_INFO - "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n", - cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000, + pr_info( + "GPMC CS%d: %-17s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n", + cs, name, ticks, gpmc_get_clk_period(cs, cd) * ticks / 1000, (l >> st_bit) & mask, time); #endif l &= ~(mask << st_bit); @@ -494,18 +625,56 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return 0; } -#define GPMC_SET_ONE(reg, st, end, field) \ - if (set_gpmc_timing_reg(cs, (reg), (st), (end), \ - t->field, #field) < 0) \ +#define GPMC_SET_ONE_CD_MAX(reg, st, end, max, field, cd) \ + if (set_gpmc_timing_reg(cs, (reg), (st), (end), (max), \ + t->field, (cd), #field) < 0) \ return -1 +#define GPMC_SET_ONE(reg, st, end, field) \ + GPMC_SET_ONE_CD_MAX(reg, st, end, 0, field, GPMC_CD_FCLK) + +/** + * gpmc_calc_waitmonitoring_divider - calculate proper GPMCFCLKDIVIDER based on WAITMONITORINGTIME + * WAITMONITORINGTIME will be _at least_ as long as desired, i.e. + * read --> don't sample bus too early + * write --> data is longer on bus + * + * Formula: + * gpmc_clk_div + 1 = ceil(ceil(waitmonitoringtime_ns / gpmc_fclk_ns) + * / waitmonitoring_ticks) + * WAITMONITORINGTIME resulting in 0 or 1 tick with div = 1 are caught by + * div <= 0 check. + * + * @wait_monitoring: WAITMONITORINGTIME in ns. + * @return: -1 on failure to scale, else proper divider > 0. + */ +static int gpmc_calc_waitmonitoring_divider(unsigned int wait_monitoring) +{ + + int div = gpmc_ns_to_ticks(wait_monitoring); + + div += GPMC_CONFIG1_WAITMONITORINGTIME_MAX - 1; + div /= GPMC_CONFIG1_WAITMONITORINGTIME_MAX; + + if (div > 4) + return -1; + if (div <= 0) + div = 1; + + return div; + +} + +/** + * gpmc_calc_divider - calculate GPMC_FCLK divider for sync_clk GPMC_CLK period. + * @sync_clk: GPMC_CLK period in ps. + * @return: Returns at least 1 if GPMC_FCLK can be divided to GPMC_CLK. + * Else, returns -1. + */ int gpmc_calc_divider(unsigned int sync_clk) { - int div; - u32 l; + int div = gpmc_ps_to_ticks(sync_clk); - l = sync_clk + (gpmc_get_fclk_period() - 1); - div = l / gpmc_get_fclk_period(); if (div > 4) return -1; if (div <= 0) @@ -514,7 +683,15 @@ int gpmc_calc_divider(unsigned int sync_clk) return div; } -int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) +/** + * gpmc_cs_set_timings - program timing parameters for Chip Select Region. + * @cs: Chip Select Region. + * @t: GPMC timing parameters. + * @s: GPMC timing settings. + * @return: 0 on success, -1 on error. + */ +int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, + const struct gpmc_settings *s) { int div; u32 l; @@ -524,6 +701,33 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) if (div < 0) return div; + /* + * See if we need to change the divider for waitmonitoringtime. + * + * Calculate GPMCFCLKDIVIDER independent of gpmc,sync-clk-ps in DT for + * pure asynchronous accesses, i.e. both read and write asynchronous. + * However, only do so if WAITMONITORINGTIME is actually used, i.e. + * either WAITREADMONITORING or WAITWRITEMONITORING is set. + * + * This statement must not change div to scale async WAITMONITORINGTIME + * to protect mixed synchronous and asynchronous accesses. + * + * We raise an error later if WAITMONITORINGTIME does not fit. + */ + if (!s->sync_read && !s->sync_write && + (s->wait_on_read || s->wait_on_write) + ) { + + div = gpmc_calc_waitmonitoring_divider(t->wait_monitoring); + if (div < 0) { + pr_err("%s: waitmonitoringtime %3d ns too large for greatest gpmcfclkdivider.\n", + __func__, + t->wait_monitoring + ); + return -1; + } + } + GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on); GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off); GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off); @@ -546,27 +750,27 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround); GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay); - GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring); - GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation); - if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS) GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); if (gpmc_capability & GPMC_HAS_WR_ACCESS) GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); - /* caller is expected to have initialized CONFIG1 to cover - * at least sync vs async - */ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) { + l &= ~0x03; + l |= (div - 1); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); + + GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 18, 19, + GPMC_CONFIG1_WAITMONITORINGTIME_MAX, + wait_monitoring, GPMC_CD_CLK); + GPMC_SET_ONE_CD_MAX(GPMC_CS_CONFIG1, 25, 26, + GPMC_CONFIG1_CLKACTIVATIONTIME_MAX, + clk_activation, GPMC_CD_FCLK); + #ifdef DEBUG - printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n", - cs, (div * gpmc_get_fclk_period()) / 1000, div); + pr_info("GPMC CS%d CLK period is %lu ns (div %d)\n", + cs, (div * gpmc_get_fclk_period()) / 1000, div); #endif - l &= ~0x03; - l |= (div - 1); - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); - } gpmc_cs_bool_timings(cs, &t->bool_timings); gpmc_cs_show_timings(cs, "after gpmc_cs_set_timings"); @@ -586,12 +790,15 @@ static int gpmc_cs_set_memconf(int cs, u32 base, u32 size) if (base & (size - 1)) return -EINVAL; + base >>= GPMC_CHUNK_SHIFT; mask = (1 << GPMC_SECTION_SHIFT) - size; + mask >>= GPMC_CHUNK_SHIFT; + mask <<= GPMC_CONFIG7_MASKADDRESS_OFFSET; + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - l &= ~0x3f; - l = (base >> GPMC_CHUNK_SHIFT) & 0x3f; - l &= ~(0x0f << 8); - l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; + l &= ~GPMC_CONFIG7_MASK; + l |= base & GPMC_CONFIG7_BASEADDRESS_MASK; + l |= mask & GPMC_CONFIG7_MASKADDRESS_MASK; l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); @@ -656,7 +863,7 @@ static void gpmc_cs_set_name(int cs, const char *name) gpmc->name = name; } -const char *gpmc_cs_get_name(int cs) +static const char *gpmc_cs_get_name(int cs) { struct gpmc_cs_data *gpmc = &gpmc_cs[cs]; @@ -1786,7 +1993,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, if (ret < 0) goto err; - ret = gpmc_cs_set_timings(cs, &gpmc_t); + ret = gpmc_cs_set_timings(cs, &gpmc_t, &gpmc_s); if (ret) { dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n", child->name); @@ -1802,8 +2009,21 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, gpmc_cs_enable_mem(cs); no_timings: - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; + + /* create platform device, NULL on error or when disabled */ + if (!of_platform_device_create(child, NULL, &pdev->dev)) + goto err_child_fail; + + /* is child a common bus? */ + if (of_match_node(of_default_bus_match_table, child)) + /* create children and other common bus children */ + if (of_platform_populate(child, of_default_bus_match_table, + NULL, &pdev->dev)) + goto err_child_fail; + + return 0; + +err_child_fail: dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); ret = -ENODEV; diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index 76d6bd4da138f1162fc8a7dcc516b54d4f26b26b..d8bde82f03708bf96f7c3fbd86cdbcdd20b9689b 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -1,5 +1,6 @@ menu "SOC (System On Chip) specific Drivers" +source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/ti/Kconfig" source "drivers/soc/versatile/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 063113d0bd3871b131caec6ea902cef2f283209e..70042b259744eab805dea6e65aff46e03a74da25 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -2,6 +2,7 @@ # Makefile for the Linux Kernel SOC specific device drivers. # +obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_QCOM) += qcom/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_SOC_TI) += ti/ diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..bcdb22d5e215c9a393ccabe58f4f94ef132e3516 --- /dev/null +++ b/drivers/soc/mediatek/Kconfig @@ -0,0 +1,11 @@ +# +# MediaTek SoC drivers +# +config MTK_PMIC_WRAP + tristate "MediaTek PMIC Wrapper Support" + depends on ARCH_MEDIATEK + select REGMAP + help + Say yes here to add support for MediaTek PMIC Wrapper found + on different MediaTek SoCs. The PMIC wrapper is a proprietary + hardware to connect the PMIC. diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..ecaf4defd7f6af3b8461a5f922c7934e24922a8c --- /dev/null +++ b/drivers/soc/mediatek/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MTK_PMIC_WRAP) += mtk-pmic-wrap.o diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c new file mode 100644 index 0000000000000000000000000000000000000000..db5be1eec54c8db3977ea810e13c5470f416aaa7 --- /dev/null +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c @@ -0,0 +1,975 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu, MediaTek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PWRAP_MT8135_BRIDGE_IORD_ARB_EN 0x4 +#define PWRAP_MT8135_BRIDGE_WACS3_EN 0x10 +#define PWRAP_MT8135_BRIDGE_INIT_DONE3 0x14 +#define PWRAP_MT8135_BRIDGE_WACS4_EN 0x24 +#define PWRAP_MT8135_BRIDGE_INIT_DONE4 0x28 +#define PWRAP_MT8135_BRIDGE_INT_EN 0x38 +#define PWRAP_MT8135_BRIDGE_TIMER_EN 0x48 +#define PWRAP_MT8135_BRIDGE_WDT_UNIT 0x50 +#define PWRAP_MT8135_BRIDGE_WDT_SRC_EN 0x54 + +/* macro for wrapper status */ +#define PWRAP_GET_WACS_RDATA(x) (((x) >> 0) & 0x0000ffff) +#define PWRAP_GET_WACS_FSM(x) (((x) >> 16) & 0x00000007) +#define PWRAP_GET_WACS_REQ(x) (((x) >> 19) & 0x00000001) +#define PWRAP_STATE_SYNC_IDLE0 (1 << 20) +#define PWRAP_STATE_INIT_DONE0 (1 << 21) + +/* macro for WACS FSM */ +#define PWRAP_WACS_FSM_IDLE 0x00 +#define PWRAP_WACS_FSM_REQ 0x02 +#define PWRAP_WACS_FSM_WFDLE 0x04 +#define PWRAP_WACS_FSM_WFVLDCLR 0x06 +#define PWRAP_WACS_INIT_DONE 0x01 +#define PWRAP_WACS_WACS_SYNC_IDLE 0x01 +#define PWRAP_WACS_SYNC_BUSY 0x00 + +/* macro for device wrapper default value */ +#define PWRAP_DEW_READ_TEST_VAL 0x5aa5 +#define PWRAP_DEW_WRITE_TEST_VAL 0xa55a + +/* macro for manual command */ +#define PWRAP_MAN_CMD_SPI_WRITE (1 << 13) +#define PWRAP_MAN_CMD_OP_CSH (0x0 << 8) +#define PWRAP_MAN_CMD_OP_CSL (0x1 << 8) +#define PWRAP_MAN_CMD_OP_CK (0x2 << 8) +#define PWRAP_MAN_CMD_OP_OUTS (0x8 << 8) +#define PWRAP_MAN_CMD_OP_OUTD (0x9 << 8) +#define PWRAP_MAN_CMD_OP_OUTQ (0xa << 8) + +/* macro for slave device wrapper registers */ +#define PWRAP_DEW_BASE 0xbc00 +#define PWRAP_DEW_EVENT_OUT_EN (PWRAP_DEW_BASE + 0x0) +#define PWRAP_DEW_DIO_EN (PWRAP_DEW_BASE + 0x2) +#define PWRAP_DEW_EVENT_SRC_EN (PWRAP_DEW_BASE + 0x4) +#define PWRAP_DEW_EVENT_SRC (PWRAP_DEW_BASE + 0x6) +#define PWRAP_DEW_EVENT_FLAG (PWRAP_DEW_BASE + 0x8) +#define PWRAP_DEW_READ_TEST (PWRAP_DEW_BASE + 0xa) +#define PWRAP_DEW_WRITE_TEST (PWRAP_DEW_BASE + 0xc) +#define PWRAP_DEW_CRC_EN (PWRAP_DEW_BASE + 0xe) +#define PWRAP_DEW_CRC_VAL (PWRAP_DEW_BASE + 0x10) +#define PWRAP_DEW_MON_GRP_SEL (PWRAP_DEW_BASE + 0x12) +#define PWRAP_DEW_MON_FLAG_SEL (PWRAP_DEW_BASE + 0x14) +#define PWRAP_DEW_EVENT_TEST (PWRAP_DEW_BASE + 0x16) +#define PWRAP_DEW_CIPHER_KEY_SEL (PWRAP_DEW_BASE + 0x18) +#define PWRAP_DEW_CIPHER_IV_SEL (PWRAP_DEW_BASE + 0x1a) +#define PWRAP_DEW_CIPHER_LOAD (PWRAP_DEW_BASE + 0x1c) +#define PWRAP_DEW_CIPHER_START (PWRAP_DEW_BASE + 0x1e) +#define PWRAP_DEW_CIPHER_RDY (PWRAP_DEW_BASE + 0x20) +#define PWRAP_DEW_CIPHER_MODE (PWRAP_DEW_BASE + 0x22) +#define PWRAP_DEW_CIPHER_SWRST (PWRAP_DEW_BASE + 0x24) +#define PWRAP_MT8173_DEW_CIPHER_IV0 (PWRAP_DEW_BASE + 0x26) +#define PWRAP_MT8173_DEW_CIPHER_IV1 (PWRAP_DEW_BASE + 0x28) +#define PWRAP_MT8173_DEW_CIPHER_IV2 (PWRAP_DEW_BASE + 0x2a) +#define PWRAP_MT8173_DEW_CIPHER_IV3 (PWRAP_DEW_BASE + 0x2c) +#define PWRAP_MT8173_DEW_CIPHER_IV4 (PWRAP_DEW_BASE + 0x2e) +#define PWRAP_MT8173_DEW_CIPHER_IV5 (PWRAP_DEW_BASE + 0x30) + +enum pwrap_regs { + PWRAP_MUX_SEL, + PWRAP_WRAP_EN, + PWRAP_DIO_EN, + PWRAP_SIDLY, + PWRAP_CSHEXT_WRITE, + PWRAP_CSHEXT_READ, + PWRAP_CSLEXT_START, + PWRAP_CSLEXT_END, + PWRAP_STAUPD_PRD, + PWRAP_STAUPD_GRPEN, + PWRAP_STAUPD_MAN_TRIG, + PWRAP_STAUPD_STA, + PWRAP_WRAP_STA, + PWRAP_HARB_INIT, + PWRAP_HARB_HPRIO, + PWRAP_HIPRIO_ARB_EN, + PWRAP_HARB_STA0, + PWRAP_HARB_STA1, + PWRAP_MAN_EN, + PWRAP_MAN_CMD, + PWRAP_MAN_RDATA, + PWRAP_MAN_VLDCLR, + PWRAP_WACS0_EN, + PWRAP_INIT_DONE0, + PWRAP_WACS0_CMD, + PWRAP_WACS0_RDATA, + PWRAP_WACS0_VLDCLR, + PWRAP_WACS1_EN, + PWRAP_INIT_DONE1, + PWRAP_WACS1_CMD, + PWRAP_WACS1_RDATA, + PWRAP_WACS1_VLDCLR, + PWRAP_WACS2_EN, + PWRAP_INIT_DONE2, + PWRAP_WACS2_CMD, + PWRAP_WACS2_RDATA, + PWRAP_WACS2_VLDCLR, + PWRAP_INT_EN, + PWRAP_INT_FLG_RAW, + PWRAP_INT_FLG, + PWRAP_INT_CLR, + PWRAP_SIG_ADR, + PWRAP_SIG_MODE, + PWRAP_SIG_VALUE, + PWRAP_SIG_ERRVAL, + PWRAP_CRC_EN, + PWRAP_TIMER_EN, + PWRAP_TIMER_STA, + PWRAP_WDT_UNIT, + PWRAP_WDT_SRC_EN, + PWRAP_WDT_FLG, + PWRAP_DEBUG_INT_SEL, + PWRAP_CIPHER_KEY_SEL, + PWRAP_CIPHER_IV_SEL, + PWRAP_CIPHER_RDY, + PWRAP_CIPHER_MODE, + PWRAP_CIPHER_SWRST, + PWRAP_DCM_EN, + PWRAP_DCM_DBC_PRD, + + /* MT8135 only regs */ + PWRAP_CSHEXT, + PWRAP_EVENT_IN_EN, + PWRAP_EVENT_DST_EN, + PWRAP_RRARB_INIT, + PWRAP_RRARB_EN, + PWRAP_RRARB_STA0, + PWRAP_RRARB_STA1, + PWRAP_EVENT_STA, + PWRAP_EVENT_STACLR, + PWRAP_CIPHER_LOAD, + PWRAP_CIPHER_START, + + /* MT8173 only regs */ + PWRAP_RDDMY, + PWRAP_SI_CK_CON, + PWRAP_DVFS_ADR0, + PWRAP_DVFS_WDATA0, + PWRAP_DVFS_ADR1, + PWRAP_DVFS_WDATA1, + PWRAP_DVFS_ADR2, + PWRAP_DVFS_WDATA2, + PWRAP_DVFS_ADR3, + PWRAP_DVFS_WDATA3, + PWRAP_DVFS_ADR4, + PWRAP_DVFS_WDATA4, + PWRAP_DVFS_ADR5, + PWRAP_DVFS_WDATA5, + PWRAP_DVFS_ADR6, + PWRAP_DVFS_WDATA6, + PWRAP_DVFS_ADR7, + PWRAP_DVFS_WDATA7, + PWRAP_SPMINF_STA, + PWRAP_CIPHER_EN, +}; + +static int mt8173_regs[] = { + [PWRAP_MUX_SEL] = 0x0, + [PWRAP_WRAP_EN] = 0x4, + [PWRAP_DIO_EN] = 0x8, + [PWRAP_SIDLY] = 0xc, + [PWRAP_RDDMY] = 0x10, + [PWRAP_SI_CK_CON] = 0x14, + [PWRAP_CSHEXT_WRITE] = 0x18, + [PWRAP_CSHEXT_READ] = 0x1c, + [PWRAP_CSLEXT_START] = 0x20, + [PWRAP_CSLEXT_END] = 0x24, + [PWRAP_STAUPD_PRD] = 0x28, + [PWRAP_STAUPD_GRPEN] = 0x2c, + [PWRAP_STAUPD_MAN_TRIG] = 0x40, + [PWRAP_STAUPD_STA] = 0x44, + [PWRAP_WRAP_STA] = 0x48, + [PWRAP_HARB_INIT] = 0x4c, + [PWRAP_HARB_HPRIO] = 0x50, + [PWRAP_HIPRIO_ARB_EN] = 0x54, + [PWRAP_HARB_STA0] = 0x58, + [PWRAP_HARB_STA1] = 0x5c, + [PWRAP_MAN_EN] = 0x60, + [PWRAP_MAN_CMD] = 0x64, + [PWRAP_MAN_RDATA] = 0x68, + [PWRAP_MAN_VLDCLR] = 0x6c, + [PWRAP_WACS0_EN] = 0x70, + [PWRAP_INIT_DONE0] = 0x74, + [PWRAP_WACS0_CMD] = 0x78, + [PWRAP_WACS0_RDATA] = 0x7c, + [PWRAP_WACS0_VLDCLR] = 0x80, + [PWRAP_WACS1_EN] = 0x84, + [PWRAP_INIT_DONE1] = 0x88, + [PWRAP_WACS1_CMD] = 0x8c, + [PWRAP_WACS1_RDATA] = 0x90, + [PWRAP_WACS1_VLDCLR] = 0x94, + [PWRAP_WACS2_EN] = 0x98, + [PWRAP_INIT_DONE2] = 0x9c, + [PWRAP_WACS2_CMD] = 0xa0, + [PWRAP_WACS2_RDATA] = 0xa4, + [PWRAP_WACS2_VLDCLR] = 0xa8, + [PWRAP_INT_EN] = 0xac, + [PWRAP_INT_FLG_RAW] = 0xb0, + [PWRAP_INT_FLG] = 0xb4, + [PWRAP_INT_CLR] = 0xb8, + [PWRAP_SIG_ADR] = 0xbc, + [PWRAP_SIG_MODE] = 0xc0, + [PWRAP_SIG_VALUE] = 0xc4, + [PWRAP_SIG_ERRVAL] = 0xc8, + [PWRAP_CRC_EN] = 0xcc, + [PWRAP_TIMER_EN] = 0xd0, + [PWRAP_TIMER_STA] = 0xd4, + [PWRAP_WDT_UNIT] = 0xd8, + [PWRAP_WDT_SRC_EN] = 0xdc, + [PWRAP_WDT_FLG] = 0xe0, + [PWRAP_DEBUG_INT_SEL] = 0xe4, + [PWRAP_DVFS_ADR0] = 0xe8, + [PWRAP_DVFS_WDATA0] = 0xec, + [PWRAP_DVFS_ADR1] = 0xf0, + [PWRAP_DVFS_WDATA1] = 0xf4, + [PWRAP_DVFS_ADR2] = 0xf8, + [PWRAP_DVFS_WDATA2] = 0xfc, + [PWRAP_DVFS_ADR3] = 0x100, + [PWRAP_DVFS_WDATA3] = 0x104, + [PWRAP_DVFS_ADR4] = 0x108, + [PWRAP_DVFS_WDATA4] = 0x10c, + [PWRAP_DVFS_ADR5] = 0x110, + [PWRAP_DVFS_WDATA5] = 0x114, + [PWRAP_DVFS_ADR6] = 0x118, + [PWRAP_DVFS_WDATA6] = 0x11c, + [PWRAP_DVFS_ADR7] = 0x120, + [PWRAP_DVFS_WDATA7] = 0x124, + [PWRAP_SPMINF_STA] = 0x128, + [PWRAP_CIPHER_KEY_SEL] = 0x12c, + [PWRAP_CIPHER_IV_SEL] = 0x130, + [PWRAP_CIPHER_EN] = 0x134, + [PWRAP_CIPHER_RDY] = 0x138, + [PWRAP_CIPHER_MODE] = 0x13c, + [PWRAP_CIPHER_SWRST] = 0x140, + [PWRAP_DCM_EN] = 0x144, + [PWRAP_DCM_DBC_PRD] = 0x148, +}; + +static int mt8135_regs[] = { + [PWRAP_MUX_SEL] = 0x0, + [PWRAP_WRAP_EN] = 0x4, + [PWRAP_DIO_EN] = 0x8, + [PWRAP_SIDLY] = 0xc, + [PWRAP_CSHEXT] = 0x10, + [PWRAP_CSHEXT_WRITE] = 0x14, + [PWRAP_CSHEXT_READ] = 0x18, + [PWRAP_CSLEXT_START] = 0x1c, + [PWRAP_CSLEXT_END] = 0x20, + [PWRAP_STAUPD_PRD] = 0x24, + [PWRAP_STAUPD_GRPEN] = 0x28, + [PWRAP_STAUPD_MAN_TRIG] = 0x2c, + [PWRAP_STAUPD_STA] = 0x30, + [PWRAP_EVENT_IN_EN] = 0x34, + [PWRAP_EVENT_DST_EN] = 0x38, + [PWRAP_WRAP_STA] = 0x3c, + [PWRAP_RRARB_INIT] = 0x40, + [PWRAP_RRARB_EN] = 0x44, + [PWRAP_RRARB_STA0] = 0x48, + [PWRAP_RRARB_STA1] = 0x4c, + [PWRAP_HARB_INIT] = 0x50, + [PWRAP_HARB_HPRIO] = 0x54, + [PWRAP_HIPRIO_ARB_EN] = 0x58, + [PWRAP_HARB_STA0] = 0x5c, + [PWRAP_HARB_STA1] = 0x60, + [PWRAP_MAN_EN] = 0x64, + [PWRAP_MAN_CMD] = 0x68, + [PWRAP_MAN_RDATA] = 0x6c, + [PWRAP_MAN_VLDCLR] = 0x70, + [PWRAP_WACS0_EN] = 0x74, + [PWRAP_INIT_DONE0] = 0x78, + [PWRAP_WACS0_CMD] = 0x7c, + [PWRAP_WACS0_RDATA] = 0x80, + [PWRAP_WACS0_VLDCLR] = 0x84, + [PWRAP_WACS1_EN] = 0x88, + [PWRAP_INIT_DONE1] = 0x8c, + [PWRAP_WACS1_CMD] = 0x90, + [PWRAP_WACS1_RDATA] = 0x94, + [PWRAP_WACS1_VLDCLR] = 0x98, + [PWRAP_WACS2_EN] = 0x9c, + [PWRAP_INIT_DONE2] = 0xa0, + [PWRAP_WACS2_CMD] = 0xa4, + [PWRAP_WACS2_RDATA] = 0xa8, + [PWRAP_WACS2_VLDCLR] = 0xac, + [PWRAP_INT_EN] = 0xb0, + [PWRAP_INT_FLG_RAW] = 0xb4, + [PWRAP_INT_FLG] = 0xb8, + [PWRAP_INT_CLR] = 0xbc, + [PWRAP_SIG_ADR] = 0xc0, + [PWRAP_SIG_MODE] = 0xc4, + [PWRAP_SIG_VALUE] = 0xc8, + [PWRAP_SIG_ERRVAL] = 0xcc, + [PWRAP_CRC_EN] = 0xd0, + [PWRAP_EVENT_STA] = 0xd4, + [PWRAP_EVENT_STACLR] = 0xd8, + [PWRAP_TIMER_EN] = 0xdc, + [PWRAP_TIMER_STA] = 0xe0, + [PWRAP_WDT_UNIT] = 0xe4, + [PWRAP_WDT_SRC_EN] = 0xe8, + [PWRAP_WDT_FLG] = 0xec, + [PWRAP_DEBUG_INT_SEL] = 0xf0, + [PWRAP_CIPHER_KEY_SEL] = 0x134, + [PWRAP_CIPHER_IV_SEL] = 0x138, + [PWRAP_CIPHER_LOAD] = 0x13c, + [PWRAP_CIPHER_START] = 0x140, + [PWRAP_CIPHER_RDY] = 0x144, + [PWRAP_CIPHER_MODE] = 0x148, + [PWRAP_CIPHER_SWRST] = 0x14c, + [PWRAP_DCM_EN] = 0x15c, + [PWRAP_DCM_DBC_PRD] = 0x160, +}; + +enum pwrap_type { + PWRAP_MT8135, + PWRAP_MT8173, +}; + +struct pmic_wrapper_type { + int *regs; + enum pwrap_type type; + u32 arb_en_all; +}; + +static struct pmic_wrapper_type pwrap_mt8135 = { + .regs = mt8135_regs, + .type = PWRAP_MT8135, + .arb_en_all = 0x1ff, +}; + +static struct pmic_wrapper_type pwrap_mt8173 = { + .regs = mt8173_regs, + .type = PWRAP_MT8173, + .arb_en_all = 0x3f, +}; + +struct pmic_wrapper { + struct device *dev; + void __iomem *base; + struct regmap *regmap; + int *regs; + enum pwrap_type type; + u32 arb_en_all; + struct clk *clk_spi; + struct clk *clk_wrap; + struct reset_control *rstc; + + struct reset_control *rstc_bridge; + void __iomem *bridge_base; +}; + +static inline int pwrap_is_mt8135(struct pmic_wrapper *wrp) +{ + return wrp->type == PWRAP_MT8135; +} + +static inline int pwrap_is_mt8173(struct pmic_wrapper *wrp) +{ + return wrp->type == PWRAP_MT8173; +} + +static u32 pwrap_readl(struct pmic_wrapper *wrp, enum pwrap_regs reg) +{ + return readl(wrp->base + wrp->regs[reg]); +} + +static void pwrap_writel(struct pmic_wrapper *wrp, u32 val, enum pwrap_regs reg) +{ + writel(val, wrp->base + wrp->regs[reg]); +} + +static bool pwrap_is_fsm_idle(struct pmic_wrapper *wrp) +{ + u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + + return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE; +} + +static bool pwrap_is_fsm_vldclr(struct pmic_wrapper *wrp) +{ + u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + + return PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR; +} + +static bool pwrap_is_sync_idle(struct pmic_wrapper *wrp) +{ + return pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_SYNC_IDLE0; +} + +static bool pwrap_is_fsm_idle_and_sync_idle(struct pmic_wrapper *wrp) +{ + u32 val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + + return (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_IDLE) && + (val & PWRAP_STATE_SYNC_IDLE0); +} + +static int pwrap_wait_for_state(struct pmic_wrapper *wrp, + bool (*fp)(struct pmic_wrapper *)) +{ + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(255); + + do { + if (time_after(jiffies, timeout)) + return fp(wrp) ? 0 : -ETIMEDOUT; + if (fp(wrp)) + return 0; + } while (1); +} + +static int pwrap_write(struct pmic_wrapper *wrp, u32 adr, u32 wdata) +{ + int ret; + u32 val; + + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR) + pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR); + + ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle); + if (ret) + return ret; + + pwrap_writel(wrp, (1 << 31) | ((adr >> 1) << 16) | wdata, + PWRAP_WACS2_CMD); + + return 0; +} + +static int pwrap_read(struct pmic_wrapper *wrp, u32 adr, u32 *rdata) +{ + int ret; + u32 val; + + val = pwrap_readl(wrp, PWRAP_WACS2_RDATA); + if (PWRAP_GET_WACS_FSM(val) == PWRAP_WACS_FSM_WFVLDCLR) + pwrap_writel(wrp, 1, PWRAP_WACS2_VLDCLR); + + ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle); + if (ret) + return ret; + + pwrap_writel(wrp, (adr >> 1) << 16, PWRAP_WACS2_CMD); + + ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_vldclr); + if (ret) + return ret; + + *rdata = PWRAP_GET_WACS_RDATA(pwrap_readl(wrp, PWRAP_WACS2_RDATA)); + + return 0; +} + +static int pwrap_regmap_read(void *context, u32 adr, u32 *rdata) +{ + return pwrap_read(context, adr, rdata); +} + +static int pwrap_regmap_write(void *context, u32 adr, u32 wdata) +{ + return pwrap_write(context, adr, wdata); +} + +static int pwrap_reset_spislave(struct pmic_wrapper *wrp) +{ + int ret, i; + + pwrap_writel(wrp, 0, PWRAP_HIPRIO_ARB_EN); + pwrap_writel(wrp, 0, PWRAP_WRAP_EN); + pwrap_writel(wrp, 1, PWRAP_MUX_SEL); + pwrap_writel(wrp, 1, PWRAP_MAN_EN); + pwrap_writel(wrp, 0, PWRAP_DIO_EN); + + pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_CSL, + PWRAP_MAN_CMD); + pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_OUTS, + PWRAP_MAN_CMD); + pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_CSH, + PWRAP_MAN_CMD); + + for (i = 0; i < 4; i++) + pwrap_writel(wrp, PWRAP_MAN_CMD_SPI_WRITE | PWRAP_MAN_CMD_OP_OUTS, + PWRAP_MAN_CMD); + + ret = pwrap_wait_for_state(wrp, pwrap_is_sync_idle); + if (ret) { + dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret); + return ret; + } + + pwrap_writel(wrp, 0, PWRAP_MAN_EN); + pwrap_writel(wrp, 0, PWRAP_MUX_SEL); + + return 0; +} + +/* + * pwrap_init_sidly - configure serial input delay + * + * This configures the serial input delay. We can configure 0, 2, 4 or 6ns + * delay. Do a read test with all possible values and chose the best delay. + */ +static int pwrap_init_sidly(struct pmic_wrapper *wrp) +{ + u32 rdata; + u32 i; + u32 pass = 0; + signed char dly[16] = { + -1, 0, 1, 0, 2, -1, 1, 1, 3, -1, -1, -1, 3, -1, 2, 1 + }; + + for (i = 0; i < 4; i++) { + pwrap_writel(wrp, i, PWRAP_SIDLY); + pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata); + if (rdata == PWRAP_DEW_READ_TEST_VAL) { + dev_dbg(wrp->dev, "[Read Test] pass, SIDLY=%x\n", i); + pass |= 1 << i; + } + } + + if (dly[pass] < 0) { + dev_err(wrp->dev, "sidly pass range 0x%x not continuous\n", + pass); + return -EIO; + } + + pwrap_writel(wrp, dly[pass], PWRAP_SIDLY); + + return 0; +} + +static int pwrap_init_reg_clock(struct pmic_wrapper *wrp) +{ + unsigned long rate_spi; + int ck_mhz; + + rate_spi = clk_get_rate(wrp->clk_spi); + + if (rate_spi > 26000000) + ck_mhz = 26; + else if (rate_spi > 18000000) + ck_mhz = 18; + else + ck_mhz = 0; + + switch (ck_mhz) { + case 18: + if (pwrap_is_mt8135(wrp)) + pwrap_writel(wrp, 0xc, PWRAP_CSHEXT); + pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE); + pwrap_writel(wrp, 0xc, PWRAP_CSHEXT_READ); + pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START); + pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END); + break; + case 26: + if (pwrap_is_mt8135(wrp)) + pwrap_writel(wrp, 0x4, PWRAP_CSHEXT); + pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_WRITE); + pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_READ); + pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_START); + pwrap_writel(wrp, 0x0, PWRAP_CSLEXT_END); + break; + case 0: + if (pwrap_is_mt8135(wrp)) + pwrap_writel(wrp, 0xf, PWRAP_CSHEXT); + pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_WRITE); + pwrap_writel(wrp, 0xf, PWRAP_CSHEXT_READ); + pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_START); + pwrap_writel(wrp, 0xf, PWRAP_CSLEXT_END); + break; + default: + return -EINVAL; + } + + return 0; +} + +static bool pwrap_is_cipher_ready(struct pmic_wrapper *wrp) +{ + return pwrap_readl(wrp, PWRAP_CIPHER_RDY) & 1; +} + +static bool pwrap_is_pmic_cipher_ready(struct pmic_wrapper *wrp) +{ + u32 rdata; + int ret; + + ret = pwrap_read(wrp, PWRAP_DEW_CIPHER_RDY, &rdata); + if (ret) + return 0; + + return rdata == 1; +} + +static int pwrap_init_cipher(struct pmic_wrapper *wrp) +{ + int ret; + u32 rdata; + + pwrap_writel(wrp, 0x1, PWRAP_CIPHER_SWRST); + pwrap_writel(wrp, 0x0, PWRAP_CIPHER_SWRST); + pwrap_writel(wrp, 0x1, PWRAP_CIPHER_KEY_SEL); + pwrap_writel(wrp, 0x2, PWRAP_CIPHER_IV_SEL); + + if (pwrap_is_mt8135(wrp)) { + pwrap_writel(wrp, 1, PWRAP_CIPHER_LOAD); + pwrap_writel(wrp, 1, PWRAP_CIPHER_START); + } else { + pwrap_writel(wrp, 1, PWRAP_CIPHER_EN); + } + + /* Config cipher mode @PMIC */ + pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x1); + pwrap_write(wrp, PWRAP_DEW_CIPHER_SWRST, 0x0); + pwrap_write(wrp, PWRAP_DEW_CIPHER_KEY_SEL, 0x1); + pwrap_write(wrp, PWRAP_DEW_CIPHER_IV_SEL, 0x2); + pwrap_write(wrp, PWRAP_DEW_CIPHER_LOAD, 0x1); + pwrap_write(wrp, PWRAP_DEW_CIPHER_START, 0x1); + + /* wait for cipher data ready@AP */ + ret = pwrap_wait_for_state(wrp, pwrap_is_cipher_ready); + if (ret) { + dev_err(wrp->dev, "cipher data ready@AP fail, ret=%d\n", ret); + return ret; + } + + /* wait for cipher data ready@PMIC */ + ret = pwrap_wait_for_state(wrp, pwrap_is_pmic_cipher_ready); + if (ret) { + dev_err(wrp->dev, "timeout waiting for cipher data ready@PMIC\n"); + return ret; + } + + /* wait for cipher mode idle */ + pwrap_write(wrp, PWRAP_DEW_CIPHER_MODE, 0x1); + ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle); + if (ret) { + dev_err(wrp->dev, "cipher mode idle fail, ret=%d\n", ret); + return ret; + } + + pwrap_writel(wrp, 1, PWRAP_CIPHER_MODE); + + /* Write Test */ + if (pwrap_write(wrp, PWRAP_DEW_WRITE_TEST, PWRAP_DEW_WRITE_TEST_VAL) || + pwrap_read(wrp, PWRAP_DEW_WRITE_TEST, &rdata) || + (rdata != PWRAP_DEW_WRITE_TEST_VAL)) { + dev_err(wrp->dev, "rdata=0x%04X\n", rdata); + return -EFAULT; + } + + return 0; +} + +static int pwrap_init(struct pmic_wrapper *wrp) +{ + int ret; + u32 rdata; + + reset_control_reset(wrp->rstc); + if (wrp->rstc_bridge) + reset_control_reset(wrp->rstc_bridge); + + if (pwrap_is_mt8173(wrp)) { + /* Enable DCM */ + pwrap_writel(wrp, 3, PWRAP_DCM_EN); + pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD); + } + + /* Reset SPI slave */ + ret = pwrap_reset_spislave(wrp); + if (ret) + return ret; + + pwrap_writel(wrp, 1, PWRAP_WRAP_EN); + + pwrap_writel(wrp, wrp->arb_en_all, PWRAP_HIPRIO_ARB_EN); + + pwrap_writel(wrp, 1, PWRAP_WACS2_EN); + + ret = pwrap_init_reg_clock(wrp); + if (ret) + return ret; + + /* Setup serial input delay */ + ret = pwrap_init_sidly(wrp); + if (ret) + return ret; + + /* Enable dual IO mode */ + pwrap_write(wrp, PWRAP_DEW_DIO_EN, 1); + + /* Check IDLE & INIT_DONE in advance */ + ret = pwrap_wait_for_state(wrp, pwrap_is_fsm_idle_and_sync_idle); + if (ret) { + dev_err(wrp->dev, "%s fail, ret=%d\n", __func__, ret); + return ret; + } + + pwrap_writel(wrp, 1, PWRAP_DIO_EN); + + /* Read Test */ + pwrap_read(wrp, PWRAP_DEW_READ_TEST, &rdata); + if (rdata != PWRAP_DEW_READ_TEST_VAL) { + dev_err(wrp->dev, "Read test failed after switch to DIO mode: 0x%04x != 0x%04x\n", + PWRAP_DEW_READ_TEST_VAL, rdata); + return -EFAULT; + } + + /* Enable encryption */ + ret = pwrap_init_cipher(wrp); + if (ret) + return ret; + + /* Signature checking - using CRC */ + if (pwrap_write(wrp, PWRAP_DEW_CRC_EN, 0x1)) + return -EFAULT; + + pwrap_writel(wrp, 0x1, PWRAP_CRC_EN); + pwrap_writel(wrp, 0x0, PWRAP_SIG_MODE); + pwrap_writel(wrp, PWRAP_DEW_CRC_VAL, PWRAP_SIG_ADR); + pwrap_writel(wrp, wrp->arb_en_all, PWRAP_HIPRIO_ARB_EN); + + if (pwrap_is_mt8135(wrp)) + pwrap_writel(wrp, 0x7, PWRAP_RRARB_EN); + + pwrap_writel(wrp, 0x1, PWRAP_WACS0_EN); + pwrap_writel(wrp, 0x1, PWRAP_WACS1_EN); + pwrap_writel(wrp, 0x1, PWRAP_WACS2_EN); + pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD); + pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN); + pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT); + pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN); + pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN); + pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN); + + if (pwrap_is_mt8135(wrp)) { + /* enable pwrap events and pwrap bridge in AP side */ + pwrap_writel(wrp, 0x1, PWRAP_EVENT_IN_EN); + pwrap_writel(wrp, 0xffff, PWRAP_EVENT_DST_EN); + writel(0x7f, wrp->bridge_base + PWRAP_MT8135_BRIDGE_IORD_ARB_EN); + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS3_EN); + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS4_EN); + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_UNIT); + writel(0xffff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_SRC_EN); + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_TIMER_EN); + writel(0x7ff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INT_EN); + + /* enable PMIC event out and sources */ + if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) || + pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) { + dev_err(wrp->dev, "enable dewrap fail\n"); + return -EFAULT; + } + } else { + /* PMIC_DEWRAP enables */ + if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) || + pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) { + dev_err(wrp->dev, "enable dewrap fail\n"); + return -EFAULT; + } + } + + /* Setup the init done registers */ + pwrap_writel(wrp, 1, PWRAP_INIT_DONE2); + pwrap_writel(wrp, 1, PWRAP_INIT_DONE0); + pwrap_writel(wrp, 1, PWRAP_INIT_DONE1); + + if (pwrap_is_mt8135(wrp)) { + writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE3); + writel(1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INIT_DONE4); + } + + return 0; +} + +static irqreturn_t pwrap_interrupt(int irqno, void *dev_id) +{ + u32 rdata; + struct pmic_wrapper *wrp = dev_id; + + rdata = pwrap_readl(wrp, PWRAP_INT_FLG); + + dev_err(wrp->dev, "unexpected interrupt int=0x%x\n", rdata); + + pwrap_writel(wrp, 0xffffffff, PWRAP_INT_CLR); + + return IRQ_HANDLED; +} + +static const struct regmap_config pwrap_regmap_config = { + .reg_bits = 16, + .val_bits = 16, + .reg_stride = 2, + .reg_read = pwrap_regmap_read, + .reg_write = pwrap_regmap_write, + .max_register = 0xffff, +}; + +static struct of_device_id of_pwrap_match_tbl[] = { + { + .compatible = "mediatek,mt8135-pwrap", + .data = &pwrap_mt8135, + }, { + .compatible = "mediatek,mt8173-pwrap", + .data = &pwrap_mt8173, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl); + +static int pwrap_probe(struct platform_device *pdev) +{ + int ret, irq; + struct pmic_wrapper *wrp; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(of_pwrap_match_tbl, &pdev->dev); + const struct pmic_wrapper_type *type; + struct resource *res; + + wrp = devm_kzalloc(&pdev->dev, sizeof(*wrp), GFP_KERNEL); + if (!wrp) + return -ENOMEM; + + platform_set_drvdata(pdev, wrp); + + type = of_id->data; + wrp->regs = type->regs; + wrp->type = type->type; + wrp->arb_en_all = type->arb_en_all; + wrp->dev = &pdev->dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwrap"); + wrp->base = devm_ioremap_resource(wrp->dev, res); + if (IS_ERR(wrp->base)) + return PTR_ERR(wrp->base); + + wrp->rstc = devm_reset_control_get(wrp->dev, "pwrap"); + if (IS_ERR(wrp->rstc)) { + ret = PTR_ERR(wrp->rstc); + dev_dbg(wrp->dev, "cannot get pwrap reset: %d\n", ret); + return ret; + } + + if (pwrap_is_mt8135(wrp)) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "pwrap-bridge"); + wrp->bridge_base = devm_ioremap_resource(wrp->dev, res); + if (IS_ERR(wrp->bridge_base)) + return PTR_ERR(wrp->bridge_base); + + wrp->rstc_bridge = devm_reset_control_get(wrp->dev, "pwrap-bridge"); + if (IS_ERR(wrp->rstc_bridge)) { + ret = PTR_ERR(wrp->rstc_bridge); + dev_dbg(wrp->dev, "cannot get pwrap-bridge reset: %d\n", ret); + return ret; + } + } + + wrp->clk_spi = devm_clk_get(wrp->dev, "spi"); + if (IS_ERR(wrp->clk_spi)) { + dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_spi)); + return PTR_ERR(wrp->clk_spi); + } + + wrp->clk_wrap = devm_clk_get(wrp->dev, "wrap"); + if (IS_ERR(wrp->clk_wrap)) { + dev_dbg(wrp->dev, "failed to get clock: %ld\n", PTR_ERR(wrp->clk_wrap)); + return PTR_ERR(wrp->clk_wrap); + } + + ret = clk_prepare_enable(wrp->clk_spi); + if (ret) + return ret; + + ret = clk_prepare_enable(wrp->clk_wrap); + if (ret) + goto err_out1; + + /* Enable internal dynamic clock */ + pwrap_writel(wrp, 1, PWRAP_DCM_EN); + pwrap_writel(wrp, 0, PWRAP_DCM_DBC_PRD); + + /* + * The PMIC could already be initialized by the bootloader. + * Skip initialization here in this case. + */ + if (!pwrap_readl(wrp, PWRAP_INIT_DONE2)) { + ret = pwrap_init(wrp); + if (ret) { + dev_dbg(wrp->dev, "init failed with %d\n", ret); + goto err_out2; + } + } + + if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) { + dev_dbg(wrp->dev, "initialization isn't finished\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + ret = devm_request_irq(wrp->dev, irq, pwrap_interrupt, IRQF_TRIGGER_HIGH, + "mt-pmic-pwrap", wrp); + if (ret) + goto err_out2; + + wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config); + if (IS_ERR(wrp->regmap)) + return PTR_ERR(wrp->regmap); + + ret = of_platform_populate(np, NULL, NULL, wrp->dev); + if (ret) { + dev_dbg(wrp->dev, "failed to create child devices at %s\n", + np->full_name); + goto err_out2; + } + + return 0; + +err_out2: + clk_disable_unprepare(wrp->clk_wrap); +err_out1: + clk_disable_unprepare(wrp->clk_spi); + + return ret; +} + +static struct platform_driver pwrap_drv = { + .driver = { + .name = "mt-pmic-pwrap", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(of_pwrap_match_tbl), + }, + .probe = pwrap_probe, +}; + +module_platform_driver(pwrap_drv); + +MODULE_AUTHOR("Flora Fu, MediaTek"); +MODULE_DESCRIPTION("MediaTek MT8135 PMIC Wrapper Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 7bd2c94f54a4e923f473db63e512b99bffa3a9ba..460b2dba109c8dac48eb3acdb493dc2b535d62c7 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -4,6 +4,7 @@ config QCOM_GSBI tristate "QCOM General Serial Bus Interface" depends on ARCH_QCOM + select MFD_SYSCON help Say y here to enable GSBI support. The GSBI provides control functions for connecting the underlying serial UART, SPI, and I2C diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c index 729425ddfd3e371d04978cdda0871209e2f24885..09c669e70d636861df12f9670dcdf339cf4021ee 100644 --- a/drivers/soc/qcom/qcom_gsbi.c +++ b/drivers/soc/qcom/qcom_gsbi.c @@ -18,22 +18,129 @@ #include #include #include +#include +#include +#include #define GSBI_CTRL_REG 0x0000 #define GSBI_PROTOCOL_SHIFT 4 +#define MAX_GSBI 12 + +#define TCSR_ADM_CRCI_BASE 0x70 + +struct crci_config { + u32 num_rows; + const u32 (*array)[MAX_GSBI]; +}; + +static const u32 crci_ipq8064[][MAX_GSBI] = { + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, +}; + +static const struct crci_config config_ipq8064 = { + .num_rows = ARRAY_SIZE(crci_ipq8064), + .array = crci_ipq8064, +}; + +static const unsigned int crci_apq8064[][MAX_GSBI] = { + { + 0x001800, 0x006000, 0x000030, 0x0000c0, + 0x000300, 0x000400, 0x000000, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, + { + 0x000000, 0x000000, 0x000000, 0x000000, + 0x000000, 0x000020, 0x0000c0, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, +}; + +static const struct crci_config config_apq8064 = { + .num_rows = ARRAY_SIZE(crci_apq8064), + .array = crci_apq8064, +}; + +static const unsigned int crci_msm8960[][MAX_GSBI] = { + { + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000400, 0x000000, 0x000000, + 0x000000, 0x000000, 0x000000, 0x000000 + }, + { + 0x000000, 0x000000, 0x000000, 0x000000, + 0x000000, 0x000020, 0x0000c0, 0x000300, + 0x001800, 0x006000, 0x000000, 0x000000 + }, +}; + +static const struct crci_config config_msm8960 = { + .num_rows = ARRAY_SIZE(crci_msm8960), + .array = crci_msm8960, +}; + +static const unsigned int crci_msm8660[][MAX_GSBI] = { + { /* ADM 0 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 0 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 1 - A */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, + { /* ADM 1 - B */ + 0x000003, 0x00000c, 0x000030, 0x0000c0, + 0x000300, 0x000c00, 0x003000, 0x00c000, + 0x030000, 0x0c0000, 0x300000, 0xc00000 + }, +}; + +static const struct crci_config config_msm8660 = { + .num_rows = ARRAY_SIZE(crci_msm8660), + .array = crci_msm8660, +}; struct gsbi_info { struct clk *hclk; u32 mode; u32 crci; + struct regmap *tcsr; +}; + +static const struct of_device_id tcsr_dt_match[] = { + { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064}, + { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064}, + { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960}, + { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660}, + { }, }; static int gsbi_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; + struct device_node *tcsr_node; + const struct of_device_id *match; struct resource *res; void __iomem *base; struct gsbi_info *gsbi; + int i; + u32 mask, gsbi_num; + const struct crci_config *config = NULL; gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL); @@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); + /* get the tcsr node and setup the config and regmap */ + gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr"); + + if (!IS_ERR(gsbi->tcsr)) { + tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0); + if (tcsr_node) { + match = of_match_node(tcsr_dt_match, tcsr_node); + if (match) + config = match->data; + else + dev_warn(&pdev->dev, "no matching TCSR\n"); + + of_node_put(tcsr_node); + } + } + + if (of_property_read_u32(node, "cell-index", &gsbi_num)) { + dev_err(&pdev->dev, "missing cell-index\n"); + return -EINVAL; + } + + if (gsbi_num < 1 || gsbi_num > MAX_GSBI) { + dev_err(&pdev->dev, "invalid cell-index\n"); + return -EINVAL; + } + if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) { dev_err(&pdev->dev, "missing mode configuration\n"); return -EINVAL; @@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_device *pdev) writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci, base + GSBI_CTRL_REG); + /* + * modify tcsr to reflect mode and ADM CRCI mux + * Each gsbi contains a pair of bits, one for RX and one for TX + * SPI mode requires both bits cleared, otherwise they are set + */ + if (config) { + for (i = 0; i < config->num_rows; i++) { + mask = config->array[i][gsbi_num - 1]; + + if (gsbi->mode == GSBI_PROT_SPI) + regmap_update_bits(gsbi->tcsr, + TCSR_ADM_CRCI_BASE + 4 * i, mask, 0); + else + regmap_update_bits(gsbi->tcsr, + TCSR_ADM_CRCI_BASE + 4 * i, mask, mask); + + } + } + /* make sure the gsbi control write is not reordered */ wmb(); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 16f20235099768d91f10931841e25176af59ef7e..ce4f3a7f95fd36fb7624a7c928ace24dac61e60c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" - depends on SOC_AT91RM9200 + depends on SOC_AT91RM9200 && MFD_SYSCON help Watchdog timer embedded into AT91RM9200 chips. This will reboot your system when the timeout is reached. diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index d244112d5b6f0541da038f5366091c0e592d3e8a..41cecb55766c049b600834d6ee021ef45f15332e 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -12,27 +12,32 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +#include #include #include #include #include #include +#include +#include #include #include #include #include +#include +#include #include #include #include #include #include -#include #define WDT_DEFAULT_TIME 5 /* seconds */ #define WDT_MAX_TIME 256 /* seconds */ static int wdt_time = WDT_DEFAULT_TIME; static bool nowayout = WATCHDOG_NOWAYOUT; +static struct regmap *regmap_st; module_param(wdt_time, int, 0); MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" @@ -50,12 +55,33 @@ static unsigned long at91wdt_busy; /* ......................................................................... */ +static int at91rm9200_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* + * Perform a hardware reset with the use of the Watchdog timer. + */ + regmap_write(regmap_st, AT91_ST_WDMR, + AT91_ST_RSTEN | AT91_ST_EXTEN | 1); + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); + + mdelay(2000); + + pr_emerg("Unable to restart system\n"); + return NOTIFY_DONE; +} + +static struct notifier_block at91rm9200_restart_nb = { + .notifier_call = at91rm9200_restart, + .priority = 192, +}; + /* * Disable the watchdog. */ static inline void at91_wdt_stop(void) { - at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN); + regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN); } /* @@ -63,9 +89,9 @@ static inline void at91_wdt_stop(void) */ static inline void at91_wdt_start(void) { - at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | + regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); - at91_st_write(AT91_ST_CR, AT91_ST_WDRST); + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); } /* @@ -73,7 +99,7 @@ static inline void at91_wdt_start(void) */ static inline void at91_wdt_reload(void) { - at91_st_write(AT91_ST_CR, AT91_ST_WDRST); + regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST); } /* ......................................................................... */ @@ -203,16 +229,32 @@ static struct miscdevice at91wdt_miscdev = { static int at91wdt_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + struct device *parent; int res; if (at91wdt_miscdev.parent) return -EBUSY; at91wdt_miscdev.parent = &pdev->dev; + parent = dev->parent; + if (!parent) { + dev_err(dev, "no parent\n"); + return -ENODEV; + } + + regmap_st = syscon_node_to_regmap(parent->of_node); + if (!regmap_st) + return -ENODEV; + res = misc_register(&at91wdt_miscdev); if (res) return res; + res = register_restart_handler(&at91rm9200_restart_nb); + if (res) + dev_warn(dev, "failed to register restart handler\n"); + pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); return 0; @@ -220,8 +262,13 @@ static int at91wdt_probe(struct platform_device *pdev) static int at91wdt_remove(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int res; + res = unregister_restart_handler(&at91rm9200_restart_nb); + if (res) + dev_warn(dev, "failed to unregister restart handler\n"); + res = misc_deregister(&at91wdt_miscdev); if (!res) at91wdt_miscdev.parent = NULL; @@ -267,7 +314,7 @@ static struct platform_driver at91wdt_driver = { .suspend = at91wdt_suspend, .resume = at91wdt_resume, .driver = { - .name = "at91_wdt", + .name = "atmel_st_watchdog", .of_match_table = at91_wdt_dt_ids, }, }; @@ -296,4 +343,4 @@ module_exit(at91_wdt_exit); MODULE_AUTHOR("Andrew Victor"); MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:at91_wdt"); +MODULE_ALIAS("platform:atmel_st_watchdog"); diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h index 79d6edf446d513d22702ad093b7382ca8ab57b7d..521ec1f2e6bc08441279c0ca5245d82394885ddf 100644 --- a/include/linux/arm-cci.h +++ b/include/linux/arm-cci.h @@ -24,16 +24,22 @@ #include #include +#include + struct device_node; #ifdef CONFIG_ARM_CCI extern bool cci_probed(void); +#else +static inline bool cci_probed(void) { return false; } +#endif + +#ifdef CONFIG_ARM_CCI400_PORT_CTRL extern int cci_ace_get_port(struct device_node *dn); extern int cci_disable_port_by_cpu(u64 mpidr); extern int __cci_control_port_by_device(struct device_node *dn, bool enable); extern int __cci_control_port_by_index(u32 port, bool enable); #else -static inline bool cci_probed(void) { return false; } static inline int cci_ace_get_port(struct device_node *dn) { return -ENODEV; @@ -49,6 +55,7 @@ static inline int __cci_control_port_by_index(u32 port, bool enable) return -ENODEV; } #endif + #define cci_disable_port_by_device(dev) \ __cci_control_port_by_device(dev, false) #define cci_enable_port_by_device(dev) \ diff --git a/include/linux/mfd/syscon/atmel-st.h b/include/linux/mfd/syscon/atmel-st.h new file mode 100644 index 0000000000000000000000000000000000000000..8acf1ec1fa3273aa079f0e3d7fe6440df663b02f --- /dev/null +++ b/include/linux/mfd/syscon/atmel-st.h @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * System Timer (ST) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H +#define _LINUX_MFD_SYSCON_ATMEL_ST_H + +#include + +#define AT91_ST_CR 0x00 /* Control Register */ +#define AT91_ST_WDRST BIT(0) /* Watchdog Timer Restart */ + +#define AT91_ST_PIMR 0x04 /* Period Interval Mode Register */ +#define AT91_ST_PIV 0xffff /* Period Interval Value */ + +#define AT91_ST_WDMR 0x08 /* Watchdog Mode Register */ +#define AT91_ST_WDV 0xffff /* Watchdog Counter Value */ +#define AT91_ST_RSTEN BIT(16) /* Reset Enable */ +#define AT91_ST_EXTEN BIT(17) /* External Signal Assertion Enable */ + +#define AT91_ST_RTMR 0x0c /* Real-time Mode Register */ +#define AT91_ST_RTPRES 0xffff /* Real-time Prescalar Value */ + +#define AT91_ST_SR 0x10 /* Status Register */ +#define AT91_ST_PITS BIT(0) /* Period Interval Timer Status */ +#define AT91_ST_WDOVF BIT(1) /* Watchdog Overflow */ +#define AT91_ST_RTTINC BIT(2) /* Real-time Timer Increment */ +#define AT91_ST_ALMS BIT(3) /* Alarm Status */ + +#define AT91_ST_IER 0x14 /* Interrupt Enable Register */ +#define AT91_ST_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_ST_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_ST_RTAR 0x20 /* Real-time Alarm Register */ +#define AT91_ST_ALMV 0xfffff /* Alarm Value */ + +#define AT91_ST_CRTR 0x24 /* Current Real-time Register */ +#define AT91_ST_CRTV 0xfffff /* Current Real-Time Value */ + +#endif /* _LINUX_MFD_SYSCON_ATMEL_ST_H */ diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h index c2080eebbb479f42f97de28ae0ee45a48a81ddf1..7dee00143afd6c14cee7d3a6060281c0c7a14d36 100644 --- a/include/linux/omap-gpmc.h +++ b/include/linux/omap-gpmc.h @@ -163,7 +163,8 @@ extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern int gpmc_calc_divider(unsigned int sync_clk); -extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t, + const struct gpmc_settings *s); extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h new file mode 100644 index 0000000000000000000000000000000000000000..d7a974d5f57c43f98eb8cb497e7b9b978a3cc0c9 --- /dev/null +++ b/include/linux/qcom_scm.h @@ -0,0 +1,28 @@ +/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_SCM_H +#define __QCOM_SCM_H + +extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); +extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); + +#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 +#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 + +extern void qcom_scm_cpu_power_down(u32 flags); + +#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) + +extern u32 qcom_scm_get_version(void); + +#endif