提交 7d148ef5 编写于 作者: D Daniel Vetter

drm/i915: fix hdmi portclock limits

In

commit 325b9d04
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Apr 19 11:24:33 2013 +0200

    drm/i915: fixup 12bpc hdmi dotclock handling

I've errornously claimed that we don't yet support the hdmi 1.4
dotclocks > 225 MHz on Haswell. But a bug report and a closer look at
the wrpll table showed that we've supported port clocks up to 300MHz.

With the new code to dynamically compute wrpll limits we should have
no issues going up to the full 340 MHz range of hdmi 1.4, so let's
just use that to fix this regression. That'll allow 4k over hdmi for
free!

v2: Drop the random hunk that somehow slipped in.

v3: Cantiga has the original HDMI dotclock limit of 165MHz. And also
patch up the mode filtering. To do so extract the dotclock limits into
a little helper function.

v4: Use 300MHz (from Bspec) instead of 340MHz (upper limit for hdmi
1.3), apparently hw is not required to be able to drive the highest
dotclocks. Suggested by Damien.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67048
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030
Tested-by: Andreas Reis <andreas.reis@gmail.com> (v2)
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 058ca4a2
......@@ -785,10 +785,22 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
}
}
static int hdmi_portclock_limit(struct intel_hdmi *hdmi)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
if (IS_G4X(dev))
return 165000;
else if (IS_HASWELL(dev))
return 300000;
else
return 225000;
}
static int intel_hdmi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
if (mode->clock > 165000)
if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector)))
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
return MODE_CLOCK_LOW;
......@@ -806,6 +818,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct drm_device *dev = encoder->base.dev;
struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
int clock_12bpc = pipe_config->requested_mode.clock * 3 / 2;
int portclock_limit = hdmi_portclock_limit(intel_hdmi);
int desired_bpp;
if (intel_hdmi->color_range_auto) {
......@@ -829,7 +842,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
* outputs. We also need to check that the higher clock still fits
* within limits.
*/
if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= 225000
if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit
&& HAS_PCH_SPLIT(dev)) {
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
......@@ -846,7 +859,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = desired_bpp;
}
if (adjusted_mode->clock > 225000) {
if (adjusted_mode->clock > portclock_limit) {
DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n");
return false;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册