From 7c4fda1aa15fdbbd2563e7e652cd3745f92a16da Mon Sep 17 00:00:00 2001 From: Chase Douglas Date: Fri, 21 May 2010 18:41:01 +0200 Subject: [PATCH] i2c-nforce2: Remove redundant error messages on ACPI conflict The ACPI subsystem strictly checks for resource conflicts. When there's a conflict, it outputs a warning message with all the details needed to properly diagnose the underlying issue. However, the i2c-nforce2 driver also prints its own message. Not only is the message redundant, it is at the KERN_ERR level, which overrides some bootsplash screens for no good reason. This change removes the two lines that print out the error messages. Signed-off-by: Chase Douglas Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-nforce2.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index b23dfe9f2787..a605a5029cfe 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -404,10 +404,9 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ /* SMBus adapter 1 */ res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1"); - if (res1 < 0) { - dev_err(&dev->dev, "Error probing SMB1.\n"); + if (res1 < 0) smbuses[0].base = 0; /* to have a check value */ - } + /* SMBus adapter 2 */ if (dmi_check_system(nforce2_dmi_blacklist2)) { dev_err(&dev->dev, "Disabling SMB2 for safety reasons.\n"); @@ -416,11 +415,10 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ } else { res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2"); - if (res2 < 0) { - dev_err(&dev->dev, "Error probing SMB2.\n"); + if (res2 < 0) smbuses[1].base = 0; /* to have a check value */ - } } + if ((res1 < 0) && (res2 < 0)) { /* we did not find even one of the SMBuses, so we give up */ kfree(smbuses); -- GitLab