提交 7c29a476 编写于 作者: M Michael Hennerich 提交者: Samuel Ortiz

gpio: adp5520: rename common defines and typos

The common adp5520 mfd defines were namespaced to avoid collisions, so
update the define used in this driver accordingly.  The structs were also
renamed to fix a spelling typo.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
上级 c24b6b6a
......@@ -34,9 +34,9 @@ static int adp5520_gpio_get_value(struct gpio_chip *chip, unsigned off)
*/
if (test_bit(off, &dev->output))
adp5520_read(dev->master, GPIO_OUT, &reg_val);
adp5520_read(dev->master, ADP5520_GPIO_OUT, &reg_val);
else
adp5520_read(dev->master, GPIO_IN, &reg_val);
adp5520_read(dev->master, ADP5520_GPIO_IN, &reg_val);
return !!(reg_val & dev->lut[off]);
}
......@@ -48,9 +48,9 @@ static void adp5520_gpio_set_value(struct gpio_chip *chip,
dev = container_of(chip, struct adp5520_gpio, gpio_chip);
if (val)
adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
adp5520_set_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
else
adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT, dev->lut[off]);
}
static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
......@@ -60,7 +60,8 @@ static int adp5520_gpio_direction_input(struct gpio_chip *chip, unsigned off)
clear_bit(off, &dev->output);
return adp5520_clr_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
return adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_2,
dev->lut[off]);
}
static int adp5520_gpio_direction_output(struct gpio_chip *chip,
......@@ -73,18 +74,21 @@ static int adp5520_gpio_direction_output(struct gpio_chip *chip,
set_bit(off, &dev->output);
if (val)
ret |= adp5520_set_bits(dev->master, GPIO_OUT, dev->lut[off]);
ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_OUT,
dev->lut[off]);
else
ret |= adp5520_clr_bits(dev->master, GPIO_OUT, dev->lut[off]);
ret |= adp5520_clr_bits(dev->master, ADP5520_GPIO_OUT,
dev->lut[off]);
ret |= adp5520_set_bits(dev->master, GPIO_CFG_2, dev->lut[off]);
ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_CFG_2,
dev->lut[off]);
return ret;
}
static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
{
struct adp5520_gpio_platfrom_data *pdata = pdev->dev.platform_data;
struct adp5520_gpio_platform_data *pdata = pdev->dev.platform_data;
struct adp5520_gpio *dev;
struct gpio_chip *gc;
int ret, i, gpios;
......@@ -129,20 +133,20 @@ static int __devinit adp5520_gpio_probe(struct platform_device *pdev)
gc->label = pdev->name;
gc->owner = THIS_MODULE;
ret = adp5520_clr_bits(dev->master, GPIO_CFG_1,
ret = adp5520_clr_bits(dev->master, ADP5520_GPIO_CFG_1,
pdata->gpio_en_mask);
if (pdata->gpio_en_mask & GPIO_C3)
ctl_mask |= C3_MODE;
if (pdata->gpio_en_mask & ADP5520_GPIO_C3)
ctl_mask |= ADP5520_C3_MODE;
if (pdata->gpio_en_mask & GPIO_R3)
ctl_mask |= R3_MODE;
if (pdata->gpio_en_mask & ADP5520_GPIO_R3)
ctl_mask |= ADP5520_R3_MODE;
if (ctl_mask)
ret = adp5520_set_bits(dev->master, LED_CONTROL,
ret = adp5520_set_bits(dev->master, ADP5520_LED_CONTROL,
ctl_mask);
ret |= adp5520_set_bits(dev->master, GPIO_PULLUP,
ret |= adp5520_set_bits(dev->master, ADP5520_GPIO_PULLUP,
pdata->gpio_pullup_mask);
if (ret) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册