提交 7a67832c 编写于 作者: D Dan Williams

libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option

We currently register a platform device for e820 type-12 memory and
register a nvdimm bus beneath it.  Registering the platform device
triggers the device-core machinery to probe for a driver, but that
search currently comes up empty.  Building the nvdimm-bus registration
into the e820_pmem platform device registration in this way forces
libnvdimm to be built-in.  Instead, convert the built-in portion of
CONFIG_X86_PMEM_LEGACY to simply register a platform device and move the
rest of the logic to the driver for e820_pmem, for the following
reasons:

1/ Letting e820_pmem support be a module allows building and testing
   libnvdimm.ko changes without rebooting

2/ All the normal policy around modules can be applied to e820_pmem
   (unbind to disable and/or blacklisting the module from loading by
   default)

3/ Moving the driver to a generic location and converting it to scan
   "iomem_resource" rather than "e820.map" means any other architecture can
   take advantage of this simple nvdimm resource discovery mechanism by
   registering a resource named "Persistent Memory (legacy)"

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
上级 6ec68954
......@@ -1426,10 +1426,14 @@ config ILLEGAL_POINTER_VALUE
source "mm/Kconfig"
config X86_PMEM_LEGACY_DEVICE
bool
config X86_PMEM_LEGACY
bool "Support non-standard NVDIMMs and ADR protected memory"
tristate "Support non-standard NVDIMMs and ADR protected memory"
depends on PHYS_ADDR_T_64BIT
depends on BLK_DEV
select X86_PMEM_LEGACY_DEVICE
select LIBNVDIMM
help
Treat memory marked using the non-standard e820 type of 12 as used
......
......@@ -37,7 +37,7 @@
/*
* This is a non-standardized way to represent ADR or NVDIMM regions that
* persist over a reboot. The kernel will ignore their special capabilities
* unless the CONFIG_X86_PMEM_LEGACY=y option is set.
* unless the CONFIG_X86_PMEM_LEGACY option is set.
*
* ( Note that older platforms also used 6 for the same type of memory,
* but newer versions switched to 12 as 6 was assigned differently. Some
......
......@@ -92,7 +92,7 @@ obj-$(CONFIG_KVM_GUEST) += kvm.o kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_X86_PMEM_LEGACY) += pmem.o
obj-$(CONFIG_X86_PMEM_LEGACY_DEVICE) += pmem.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
......
......@@ -3,80 +3,17 @@
* Copyright (c) 2015, Intel Corporation.
*/
#include <linux/platform_device.h>
#include <linux/libnvdimm.h>
#include <linux/module.h>
#include <asm/e820.h>
static void e820_pmem_release(struct device *dev)
{
struct nvdimm_bus *nvdimm_bus = dev->platform_data;
if (nvdimm_bus)
nvdimm_bus_unregister(nvdimm_bus);
}
static struct platform_device e820_pmem = {
.name = "e820_pmem",
.id = -1,
.dev = {
.release = e820_pmem_release,
},
};
static const struct attribute_group *e820_pmem_attribute_groups[] = {
&nvdimm_bus_attribute_group,
NULL,
};
static const struct attribute_group *e820_pmem_region_attribute_groups[] = {
&nd_region_attribute_group,
&nd_device_attribute_group,
NULL,
};
static __init int register_e820_pmem(void)
{
static struct nvdimm_bus_descriptor nd_desc;
struct device *dev = &e820_pmem.dev;
struct nvdimm_bus *nvdimm_bus;
int rc, i;
struct platform_device *pdev;
rc = platform_device_register(&e820_pmem);
if (rc)
return rc;
nd_desc.attr_groups = e820_pmem_attribute_groups;
nd_desc.provider_name = "e820";
nvdimm_bus = nvdimm_bus_register(dev, &nd_desc);
if (!nvdimm_bus)
goto err;
dev->platform_data = nvdimm_bus;
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
struct resource res = {
.flags = IORESOURCE_MEM,
.start = ei->addr,
.end = ei->addr + ei->size - 1,
};
struct nd_region_desc ndr_desc;
if (ei->type != E820_PRAM)
continue;
memset(&ndr_desc, 0, sizeof(ndr_desc));
ndr_desc.res = &res;
ndr_desc.attr_groups = e820_pmem_region_attribute_groups;
ndr_desc.numa_node = NUMA_NO_NODE;
if (!nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc))
goto err;
}
return 0;
err:
dev_err(dev, "failed to register legacy persistent memory ranges\n");
platform_device_unregister(&e820_pmem);
return -ENXIO;
/*
* See drivers/nvdimm/e820.c for the implementation, this is
* simply here to trigger the module to load on demand.
*/
pdev = platform_device_alloc("e820_pmem", -1);
return platform_device_add(pdev);
}
device_initcall(register_e820_pmem);
......@@ -2,6 +2,7 @@ obj-$(CONFIG_LIBNVDIMM) += libnvdimm.o
obj-$(CONFIG_BLK_DEV_PMEM) += nd_pmem.o
obj-$(CONFIG_ND_BTT) += nd_btt.o
obj-$(CONFIG_ND_BLK) += nd_blk.o
obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
nd_pmem-y := pmem.o
......@@ -9,6 +10,8 @@ nd_btt-y := btt.o
nd_blk-y := blk.o
nd_e820-y := e820.o
libnvdimm-y := core.o
libnvdimm-y += bus.o
libnvdimm-y += dimm_devs.o
......
/*
* Copyright (c) 2015, Christoph Hellwig.
* Copyright (c) 2015, Intel Corporation.
*/
#include <linux/platform_device.h>
#include <linux/libnvdimm.h>
#include <linux/module.h>
static const struct attribute_group *e820_pmem_attribute_groups[] = {
&nvdimm_bus_attribute_group,
NULL,
};
static const struct attribute_group *e820_pmem_region_attribute_groups[] = {
&nd_region_attribute_group,
&nd_device_attribute_group,
NULL,
};
static int e820_pmem_remove(struct platform_device *pdev)
{
struct nvdimm_bus *nvdimm_bus = platform_get_drvdata(pdev);
nvdimm_bus_unregister(nvdimm_bus);
return 0;
}
static int e820_pmem_probe(struct platform_device *pdev)
{
static struct nvdimm_bus_descriptor nd_desc;
struct device *dev = &pdev->dev;
struct nvdimm_bus *nvdimm_bus;
struct resource *p;
nd_desc.attr_groups = e820_pmem_attribute_groups;
nd_desc.provider_name = "e820";
nvdimm_bus = nvdimm_bus_register(dev, &nd_desc);
if (!nvdimm_bus)
goto err;
platform_set_drvdata(pdev, nvdimm_bus);
for (p = iomem_resource.child; p ; p = p->sibling) {
struct nd_region_desc ndr_desc;
if (strncmp(p->name, "Persistent Memory (legacy)", 26) != 0)
continue;
memset(&ndr_desc, 0, sizeof(ndr_desc));
ndr_desc.res = p;
ndr_desc.attr_groups = e820_pmem_region_attribute_groups;
ndr_desc.numa_node = NUMA_NO_NODE;
if (!nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc))
goto err;
}
return 0;
err:
nvdimm_bus_unregister(nvdimm_bus);
dev_err(dev, "failed to register legacy persistent memory ranges\n");
return -ENXIO;
}
static struct platform_driver e820_pmem_driver = {
.probe = e820_pmem_probe,
.remove = e820_pmem_remove,
.driver = {
.name = "e820_pmem",
},
};
static __init int e820_pmem_init(void)
{
return platform_driver_register(&e820_pmem_driver);
}
static __exit void e820_pmem_exit(void)
{
platform_driver_unregister(&e820_pmem_driver);
}
MODULE_ALIAS("platform:e820_pmem*");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Intel Corporation");
module_init(e820_pmem_init);
module_exit(e820_pmem_exit);
......@@ -15,6 +15,7 @@ obj-$(CONFIG_LIBNVDIMM) += libnvdimm.o
obj-$(CONFIG_BLK_DEV_PMEM) += nd_pmem.o
obj-$(CONFIG_ND_BTT) += nd_btt.o
obj-$(CONFIG_ND_BLK) += nd_blk.o
obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
obj-$(CONFIG_ACPI_NFIT) += nfit.o
nfit-y := $(ACPI_SRC)/nfit.o
......@@ -29,6 +30,9 @@ nd_btt-y += config_check.o
nd_blk-y := $(NVDIMM_SRC)/blk.o
nd_blk-y += config_check.o
nd_e820-y := $(NVDIMM_SRC)/e820.o
nd_e820-y += config_check.o
libnvdimm-y := $(NVDIMM_SRC)/core.o
libnvdimm-y += $(NVDIMM_SRC)/bus.o
libnvdimm-y += $(NVDIMM_SRC)/dimm_devs.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册