From 7a5d9a913f91775805acae18bd6bd96e36f78a48 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 26 Dec 2017 15:32:53 +0200 Subject: [PATCH] ARM: pxa: ulpi: fix ulpi timeout and slowpath warn Both cm-x300 and pxa3xx-ulpi use the plain clk_{en,dis}able() API. With the new clocking framework this results in warnings of type: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:714 clk_core_enable+0x90/0x9c Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc5-cm-x300+ #15 Hardware name: CM-X300 module [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (__warn+0xd8/0x100) [] (__warn) from [] (warn_slowpath_null+0x3c/0x48) [] (warn_slowpath_null) from [] (clk_core_enable+0x90/0x9c) [] (clk_core_enable) from [] (clk_core_enable_lock+0x18/0x2c) [] (clk_core_enable_lock) from [] (cm_x300_u2d_init+0x4c/0xe8) [] (cm_x300_u2d_init) from [] (pxa3xx_u2d_probe+0xe0/0x244) [] (pxa3xx_u2d_probe) from [] (platform_drv_probe+0x38/0x88) ... ------------[ cut here ]------------ and alike... And finally, it results in: ------------[ cut here ]------------ pxa310_ulpi_poll: ULPI access timed out! OTG transceiver init failed ------------[ cut here ]------------ It might be that disabling the warning in kernel config would also do the job, but IMO a better solution would be to switch to clk_prepare_enable() and clk_disable_unprepare() APIs. Signed-off-by: Igor Grinberg Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/cm-x300.c | 4 ++-- arch/arm/mach-pxa/pxa3xx-ulpi.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 01fdcc88d48f..0cf17bd2fb16 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -521,7 +521,7 @@ static int cm_x300_u2d_init(struct device *dev) pr_err("failed to get CLK_POUT: %d\n", err); return err; } - clk_enable(pout_clk); + clk_prepare_enable(pout_clk); err = cm_x300_ulpi_phy_reset(); if (err) { @@ -536,7 +536,7 @@ static int cm_x300_u2d_init(struct device *dev) static void cm_x300_u2d_exit(struct device *dev) { if (cpu_is_pxa310()) { - clk_disable(pout_clk); + clk_disable_unprepare(pout_clk); clk_put(pout_clk); } } diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index c00450764352..b3e2016f24b1 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -256,7 +256,7 @@ int pxa3xx_u2d_start_hc(struct usb_bus *host) if (!u2d) return 0; - clk_enable(u2d->clk); + clk_prepare_enable(u2d->clk); if (cpu_is_pxa310()) { pxa310_u2d_setup_otg_hc(); @@ -276,7 +276,7 @@ void pxa3xx_u2d_stop_hc(struct usb_bus *host) if (cpu_is_pxa310()) pxa310_stop_otg_hc(); - clk_disable(u2d->clk); + clk_disable_unprepare(u2d->clk); } EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc); -- GitLab