Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

788df732 · David S. Miller · 6e50e8a2 · 0d5f0316 · 788df732 · 788df732
26 changed file
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -281,7 +281,9 @@ enum ath5k_radio {
 	AR5K_RF5112	= 2,
 	AR5K_RF2413	= 3,
 	AR5K_RF5413	= 4,
-	AR5K_RF2425	= 5,
+	AR5K_RF2316	= 5,
+	AR5K_RF2317	= 6,
+	AR5K_RF2425	= 7,
 };

 /*
@@ -289,7 +291,7 @@ enum ath5k_radio {
 */

 enum ath5k_srev_type {
-	AR5K_VERSION_VER,
+	AR5K_VERSION_MAC,
 	AR5K_VERSION_RAD,
 };

@@ -301,23 +303,24 @@ struct ath5k_srev_name {

 #define AR5K_SREV_UNKNOWN	0xffff

-#define AR5K_SREV_VER_AR5210	0x00
-#define AR5K_SREV_VER_AR5311	0x10
-#define AR5K_SREV_VER_AR5311A	0x20
-#define AR5K_SREV_VER_AR5311B	0x30
-#define AR5K_SREV_VER_AR5211	0x40
-#define AR5K_SREV_VER_AR5212	0x50
-#define AR5K_SREV_VER_AR5213	0x55
-#define AR5K_SREV_VER_AR5213A	0x59
-#define AR5K_SREV_VER_AR2413	0x78
-#define AR5K_SREV_VER_AR2414	0x79
-#define AR5K_SREV_VER_AR2424	0xa0 /* PCI-E */
-#define AR5K_SREV_VER_AR5424	0xa3 /* PCI-E */
-#define AR5K_SREV_VER_AR5413	0xa4
-#define AR5K_SREV_VER_AR5414	0xa5
-#define AR5K_SREV_VER_AR5416	0xc0 /* PCI-E */
-#define AR5K_SREV_VER_AR5418	0xca /* PCI-E */
-#define AR5K_SREV_VER_AR2425	0xe2 /* PCI-E */
+#define AR5K_SREV_AR5210	0x00 /* Crete */
+#define AR5K_SREV_AR5311	0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A	0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B	0x30 /* Spirit */
+#define AR5K_SREV_AR5211	0x40 /* Oahu */
+#define AR5K_SREV_AR5212	0x50 /* Venice */
+#define AR5K_SREV_AR5213	0x55 /* ??? */
+#define AR5K_SREV_AR5213A	0x59 /* Hainan */
+#define AR5K_SREV_AR2413	0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414	0x70 /* Griffin */
+#define AR5K_SREV_AR5424	0x90 /* Condor */
+#define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414	0xa0 /* Eagle */
+#define AR5K_SREV_AR2415	0xb0 /* Cobra */
+#define AR5K_SREV_AR5416	0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418	0xca /* PCI-E */
+#define AR5K_SREV_AR2425	0xe0 /* Swan */
+#define AR5K_SREV_AR2417	0xf0 /* Nala */

 #define AR5K_SREV_RAD_5110	0x00
 #define AR5K_SREV_RAD_5111	0x10
@@ -329,10 +332,20 @@ struct ath5k_srev_name {
 #define AR5K_SREV_RAD_2112	0x40
 #define AR5K_SREV_RAD_2112A	0x45
 #define	AR5K_SREV_RAD_2112B	0x46
-#define AR5K_SREV_RAD_SC0	0x50	/* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1	0x60	/* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2	0xa0	/* Found on 2424-5/5424 */
-#define AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
+#define AR5K_SREV_RAD_2413	0x50
+#define AR5K_SREV_RAD_5413	0x60
+#define AR5K_SREV_RAD_2316	0x70
+#define AR5K_SREV_RAD_2317	0x80
+#define AR5K_SREV_RAD_5424	0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425	0xa2
+#define AR5K_SREV_RAD_5133	0xc0
+
+#define AR5K_SREV_PHY_5211	0x30
+#define AR5K_SREV_PHY_5212	0x41
+#define AR5K_SREV_PHY_2112B	0x43
+#define AR5K_SREV_PHY_2413	0x45
+#define AR5K_SREV_PHY_5413	0x61
+#define AR5K_SREV_PHY_2425	0x70

 /* IEEE defs */
 #define IEEE80211_MAX_LEN       2500

--- a/drivers/net/wireless/ath5k/attach.c
+++ b/drivers/net/wireless/ath5k/attach.c
@@ -137,7 +137,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;

 	/*
-	 * Set the mac revision based on the pci id
+	 * Set the mac version based on the pci id
 	 */
 	ah->ah_version = mac_version;

@@ -160,87 +160,132 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 			0xffffffff;
 	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
 			CHANNEL_5GHZ);
+	ah->ah_phy = AR5K_PHY(0);

-	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_radio_2ghz_revision = 0;
-	else
+	/* Try to identify radio chip based on it's srev */
+	switch (ah->ah_radio_5ghz_revision & 0xf0) {
+	case AR5K_SREV_RAD_5111:
+		ah->ah_radio = AR5K_RF5111;
+		ah->ah_single_chip = false;
 		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
 							CHANNEL_2GHZ);
-
-	/* Return on unsuported chips (unsupported eeprom etc) */
-	if ((srev >= AR5K_SREV_VER_AR5416) &&
-	(srev < AR5K_SREV_VER_AR2425)) {
-		ATH5K_ERR(sc, "Device not yet supported.\n");
-		ret = -ENODEV;
-		goto err_free;
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
-	}
-
-	/* Identify single chip solutions */
-	if (((srev <= AR5K_SREV_VER_AR5414) &&
-	(srev >= AR5K_SREV_VER_AR2413)) ||
-	(srev == AR5K_SREV_VER_AR2425)) {
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
+		break;
+	case AR5K_SREV_RAD_5112:
+	case AR5K_SREV_RAD_2112:
+		ah->ah_radio = AR5K_RF5112;
+		ah->ah_single_chip = false;
+		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+							CHANNEL_2GHZ);
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
+		break;
+	case AR5K_SREV_RAD_2413:
+		ah->ah_radio = AR5K_RF2413;
 		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+		break;
+	case AR5K_SREV_RAD_5413:
+		ah->ah_radio = AR5K_RF5413;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+		break;
+	case AR5K_SREV_RAD_2316:
+		ah->ah_radio = AR5K_RF2316;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+		break;
+	case AR5K_SREV_RAD_2317:
+		ah->ah_radio = AR5K_RF2317;
+		ah->ah_single_chip = true;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317;
+		break;
+	case AR5K_SREV_RAD_5424:
+		if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+		ah->ah_mac_version == AR5K_SREV_AR2417){
+			ah->ah_radio = AR5K_RF2425;
+			ah->ah_single_chip = true;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
 		} else {
-		ah->ah_single_chip = false;
+			ah->ah_radio = AR5K_RF5413;
+			ah->ah_single_chip = true;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
 		}
-
-	/* Single chip radio */
-	if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
-		ah->ah_radio_2ghz_revision = 0;
-
-	/* Identify the radio chip*/
+		break;
+	default:
+		/* Identify radio based on mac/phy srev */
 		if (ah->ah_version == AR5K_AR5210) {
 			ah->ah_radio = AR5K_RF5110;
-	/*
-	 * Register returns 0x0/0x04 for radio revision
-	 * so ath5k_hw_radio_revision doesn't parse the value
-	 * correctly. For now we are based on mac's srev to
-	 * identify RF2425 radio.
-	 */
-	} else if (srev == AR5K_SREV_VER_AR2425) {
+			ah->ah_single_chip = false;
+		} else if (ah->ah_version == AR5K_AR5211) {
+			ah->ah_radio = AR5K_RF5111;
+			ah->ah_single_chip = false;
+			ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+								CHANNEL_2GHZ);
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+		ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
 			ah->ah_radio = AR5K_RF2425;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
 			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
-		ah->ah_radio = AR5K_RF5111;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
+		} else if (srev == AR5K_SREV_AR5213A &&
+		ah->ah_phy_revision == AR5K_SREV_PHY_2112B) {
 			ah->ah_radio = AR5K_RF5112;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
-		ah->ah_radio = AR5K_RF2413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
-		ah->ah_radio = AR5K_RF5413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
-		/* AR5424 */
-		if (srev >= AR5K_SREV_VER_AR5424) {
+			ah->ah_single_chip = false;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B;
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
+			ah->ah_radio = AR5K_RF2316;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
 			ah->ah_radio = AR5K_RF5413;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
 			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-		/* AR2424 */
-		} else {
-			ah->ah_radio = AR5K_RF2413; /* For testing */
+		} else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+		ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+			ah->ah_radio = AR5K_RF2413;
+			ah->ah_single_chip = true;
+			ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
 			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+		} else {
+			ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
+			ret = -ENODEV;
+			goto err_free;
 		}
 	}
-	ah->ah_phy = AR5K_PHY(0);
+
+
+	/* Return on unsuported chips (unsupported eeprom etc) */
+	if ((srev >= AR5K_SREV_AR5416) &&
+	(srev < AR5K_SREV_AR2425)) {
+		ATH5K_ERR(sc, "Device not yet supported.\n");
+		ret = -ENODEV;
+		goto err_free;
+	}

 	/*
 	 * Write PCI-E power save settings
 	 */
 	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
-		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
-		ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
-		ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
-		ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
-		ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
-		ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
-		ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
-		ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
-		ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
-		ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
+		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+		/* Shut off RX when elecidle is asserted */
+		ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+		/* TODO: EEPROM work */
+		ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+		/* Shut off PLL and CLKREQ active in L1 */
+		ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+		/* Preserce other settings */
+		ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+		ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+		/* Reset SERDES to load new settings */
+		ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+		mdelay(1);
 	}

 	/*
@@ -250,14 +295,13 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 	if (ret)
 		goto err_free;

-	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
-	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
-	srev > AR5K_SREV_VER_AR2413) {
-		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
-	}
+	/* Enable pci core retry fix on Hainan (5213A) and later chips */
+	if (srev >= AR5K_SREV_AR5213A)
+		ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);

 	/*
-	 * Get card capabilities, values, ...
+	 * Get card capabilities, calibration values etc
+	 * TODO: EEPROM work
 	 */
 	ret = ath5k_eeprom_init(ah);
 	if (ret) {
@@ -273,7 +317,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 		goto err_free;
 	}

-	/* Get MAC address */
+	/* Set MAC address */
 	ret = ath5k_eeprom_read_mac(ah, mac);
 	if (ret) {
 		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",

--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -72,7 +72,7 @@ MODULE_AUTHOR("Nick Kossifidis");
 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.5.0 (EXPERIMENTAL)");
+MODULE_VERSION("0.6.0 (EXPERIMENTAL)");


 /* Known PCI ids */
@@ -93,41 +93,48 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
 	{ PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
 	{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
 	{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
-	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
+	{ PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
+	{ PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);

 /* Known SREVs */
 static struct ath5k_srev_name srev_names[] = {
-	{ "5210",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5210 },
-	{ "5311",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311 },
-	{ "5311A",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311A },
-	{ "5311B",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5311B },
-	{ "5211",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5211 },
-	{ "5212",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5212 },
-	{ "5213",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5213 },
-	{ "5213A",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5213A },
-	{ "2413",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2413 },
-	{ "2414",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2414 },
-	{ "2424",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2424 },
-	{ "5424",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5424 },
-	{ "5413",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5413 },
-	{ "5414",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5414 },
-	{ "5416",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5416 },
-	{ "5418",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR5418 },
-	{ "2425",	AR5K_VERSION_VER,	AR5K_SREV_VER_AR2425 },
-	{ "xxxxx",	AR5K_VERSION_VER,	AR5K_SREV_UNKNOWN },
+	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
+	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
+	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
+	{ "5311B",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311B },
+	{ "5211",	AR5K_VERSION_MAC,	AR5K_SREV_AR5211 },
+	{ "5212",	AR5K_VERSION_MAC,	AR5K_SREV_AR5212 },
+	{ "5213",	AR5K_VERSION_MAC,	AR5K_SREV_AR5213 },
+	{ "5213A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5213A },
+	{ "2413",	AR5K_VERSION_MAC,	AR5K_SREV_AR2413 },
+	{ "2414",	AR5K_VERSION_MAC,	AR5K_SREV_AR2414 },
+	{ "5424",	AR5K_VERSION_MAC,	AR5K_SREV_AR5424 },
+	{ "5413",	AR5K_VERSION_MAC,	AR5K_SREV_AR5413 },
+	{ "5414",	AR5K_VERSION_MAC,	AR5K_SREV_AR5414 },
+	{ "2415",	AR5K_VERSION_MAC,	AR5K_SREV_AR2415 },
+	{ "5416",	AR5K_VERSION_MAC,	AR5K_SREV_AR5416 },
+	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
+	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
+	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
+	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
+	{ "5111A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111A },
 	{ "2111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2111 },
 	{ "5112",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112 },
 	{ "5112A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112A },
+	{ "5112B",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5112B },
 	{ "2112",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112 },
 	{ "2112A",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112A },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC0 },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC1 },
-	{ "SChip",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_SC2 },
+	{ "2112B",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112B },
+	{ "2413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2413 },
+	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
+	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
+	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
+	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
@@ -390,7 +397,11 @@ ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
 	for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
 		if (srev_names[i].sr_type != type)
 			continue;
-		if ((val & 0xff) < srev_names[i + 1].sr_val) {
+
+		if ((val & 0xf0) == srev_names[i].sr_val)
+			name = srev_names[i].sr_name;
+
+		if ((val & 0xff) == srev_names[i].sr_val) {
 			name = srev_names[i].sr_name;
 			break;
 		}
@@ -536,7 +547,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 		goto err_ah;

 	ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
-			ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
+			ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
 					sc->ah->ah_mac_srev,
 					sc->ah->ah_phy_revision);


--- a/drivers/net/wireless/ath5k/dma.c
+++ b/drivers/net/wireless/ath5k/dma.c
@@ -68,7 +68,7 @@ int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
 	/*
 	 * It may take some time to disable the DMA receive unit
 	 */
-	for (i = 2000; i > 0 &&
+	for (i = 1000; i > 0 &&
 			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
 			i--)
 		udelay(10);
@@ -182,11 +182,10 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 * have any pending frames. Returns -EBUSY if we still have pending frames,
 * -EINVAL if queue number is out of range.
 *
- * TODO: Test queue drain code
 */
 int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 {
-	unsigned int i = 100;
+	unsigned int i = 40;
 	u32 tx_queue, pending;

 	ATH5K_TRACE(ah->ah_sc);
@@ -233,13 +232,53 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 			udelay(100);
 		} while (--i && pending);

+		/* For 2413+ order PCU to drop packets using
+		 * QUIET mechanism */
+		if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+		pending){
+			/* Set periodicity and duration */
+			ath5k_hw_reg_write(ah,
+				AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+				AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+				AR5K_QUIET_CTL2);
+
+			/* Enable quiet period for current TSF */
+			ath5k_hw_reg_write(ah,
+				AR5K_QUIET_CTL1_QT_EN |
+				AR5K_REG_SM(ath5k_hw_reg_read(ah,
+						AR5K_TSF_L32_5211) >> 10,
+						AR5K_QUIET_CTL1_NEXT_QT_TSF),
+				AR5K_QUIET_CTL1);
+
+			/* Force channel idle high */
+			AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+
+			/* Wait a while and disable mechanism */
+			udelay(200);
+			AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+						AR5K_QUIET_CTL1_QT_EN);
+
+			/* Re-check for pending frames */
+			i = 40;
+			do {
+				pending = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_STATUS(queue)) &
+					AR5K_QCU_STS_FRMPENDCNT;
+				udelay(100);
+			} while (--i && pending);
+
+			AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+					AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+		}
+
 		/* Clear register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
 		if (pending)
 			return -EBUSY;
 	}

-	/* TODO: Check for success else return error */
+	/* TODO: Check for success on 5210 else return error */
 	return 0;
 }

@@ -415,7 +454,7 @@ int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
 bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
 {
 	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_reg_read(ah, AR5K_INTPEND);
+	return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
 }

 /**

--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -633,8 +633,20 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
 */
 void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
 {
+	u32 val;
+
 	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
+
+	val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+	/*
+	 * Each write to the RESET_TSF bit toggles a hardware internal
+	 * signal to reset TSF, but if left high it will cause a TSF reset
+	 * on the next chip reset as well.  Thus we always write the value
+	 * twice to clear the signal.
+	 */
+	ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+	ath5k_hw_reg_write(ah, val, AR5K_BEACON);
 }

 /*

--- a/drivers/net/wireless/ath5k/qcu.c
+++ b/drivers/net/wireless/ath5k/qcu.c
@@ -375,7 +375,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 		case AR5K_TX_QUEUE_BEACON:
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
 				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP_BCN |
+				AR5K_QCU_MISC_CBREXP_BCN_DIS |
 				AR5K_QCU_MISC_BCN_ENABLE);

 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
@@ -395,8 +395,8 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 		case AR5K_TX_QUEUE_CAB:
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
 				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP |
-				AR5K_QCU_MISC_CBREXP_BCN);
+				AR5K_QCU_MISC_CBREXP_DIS |
+				AR5K_QCU_MISC_CBREXP_BCN_DIS);

 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
 				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
@@ -405,7 +405,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)

 		case AR5K_TX_QUEUE_UAPSD:
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_CBREXP);
+				AR5K_QCU_MISC_CBREXP_DIS);
 			break;

 		case AR5K_TX_QUEUE_DATA:

--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -29,6 +29,10 @@
 *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
 *
 * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
 */


@@ -295,7 +299,7 @@
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
 #define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
-#define AR5K_ISR_BRSSI		0x00020000
+#define AR5K_ISR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -303,46 +307,56 @@
 #define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
 #define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM		0x00800000	/* [5210] */
-#define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
-#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN	0x02000000	/* CBR overrun (?)  [5211+] */
-#define AR5K_ISR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_ISR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM		0x00800000	/* [5211+] */
+#define AR5K_ISR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN	0x02000000	/* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN	0x04000000	/* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */

 /*
 * Secondary status registers [5211+] (0 - 4)
 *
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
 */
 #define AR5K_SISR0		0x0084			/* Register Address [5211+] */
 #define AR5K_SISR0_QCU_TXOK	0x000003ff	/* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S	0
 #define AR5K_SISR0_QCU_TXDESC	0x03ff0000	/* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S	16

 #define AR5K_SISR1		0x0088			/* Register Address [5211+] */
 #define AR5K_SISR1_QCU_TXERR	0x000003ff	/* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S	0
 #define AR5K_SISR1_QCU_TXEOL	0x03ff0000	/* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S	16

 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
+#define	AR5K_SISR2_QCU_TXURN_S	0
 #define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
 #define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SISR2_TSFOOR	0x80000000	/* TSF OOR (?) */

 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
 #define AR5K_SISR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S	0
 #define AR5K_SISR3_QCBRURN	0x03ff0000	/* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S	16

 #define AR5K_SISR4		0x0094			/* Register Address [5211+] */
 #define AR5K_SISR4_QTRIG	0x000003ff	/* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S	0

 /*
 * Shadow read-and-clear interrupt status registers [5211+]
@@ -379,7 +393,7 @@
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
 #define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
-#define AR5K_IMR_BRSSI		0x00020000
+#define AR5K_IMR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -387,12 +401,14 @@
 #define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
 #define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
-#define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
+#define AR5K_IMR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN	0x02000000	/* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_IMR_QCBRORN	0x02000000	/* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN	0x04000000	/* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */

 /*
 * Secondary interrupt mask registers [5211+] (0 - 4)
@@ -414,13 +430,14 @@
 #define AR5K_SIMR2_QCU_TXURN_S	0
 #define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
 #define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SIMR2_TSFOOR	0x80000000	/* TSF OOR (?) */

 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
 #define AR5K_SIMR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
@@ -586,15 +603,15 @@
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
 #define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
 #define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* TIMT gated */
+#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
-#define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
-#define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
+#define	AR5K_QCU_MISC_CBREXP_DIS	0x00000020	/* Disable CBR expired counter (normal queue) */
+#define	AR5K_QCU_MISC_CBREXP_BCN_DIS	0x00000040	/* Disable CBR expired counter (beacon queue) */
 #define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
-#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR expired threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME expired or VEOL */
 #define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
 #define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
 #define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
@@ -663,6 +680,7 @@
 #define	AR5K_DCU_LCL_IFS_CW_MAX_S	10
 #define	AR5K_DCU_LCL_IFS_AIFS		0x0ff00000	/* Arbitrated Interframe Space */
 #define	AR5K_DCU_LCL_IFS_AIFS_S		20
+#define	AR5K_DCU_LCL_IFS_AIFS_MAX	0xfc		/* Anything above that can cause DCU to hang */
 #define	AR5K_QUEUE_DFS_LOCAL_IFS(_q)	AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)

 /*
@@ -691,11 +709,7 @@
 /*
 * DCU misc registers [5211+]
 *
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
 * behaviour on low priority queues when we have multiple queues
 * with pending frames. Intra-frame lockout means we wait until
 * the queue's current frame transmits (with post frame backoff and bursting)
@@ -705,15 +719,20 @@
 * No lockout means there is no special handling.
 */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_BACKOFF		0x0000003f	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_ETS_RTS_POL	0x00000040	/* End of transmission series
+							station RTS/data failure count
+							reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL	0x00000080	/* End of transmission series
+							CW reset policy */
+#define	AR5K_DCU_MISC_FRAG_WAIT		0x00000100	/* Wait for next fragment */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
 #define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
 #define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
 #define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
 #define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	1
 #define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
@@ -768,8 +787,9 @@
 #define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
 #define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
 #define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S	10
 #define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */

@@ -831,9 +851,11 @@
 #define AR5K_SLEEP_CTL_SLE_S		16
 #define AR5K_SLEEP_CTL_SLE_WAKE		0x00000000	/* Force chip awake */
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000	/* Normal sleep policy */
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL	0x00040000	/* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL	0x00080000	/* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL		0x00100000	/* Sleep policy mode */

 /*
 * Interrupt pending register
@@ -849,27 +871,28 @@

 /*
 * PCI configuration register
+ * TODO: Fix LED stuff
 */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
-#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
 #define AR5K_PCICFG_EESIZE_4K		0		/* 4K */
 #define AR5K_PCICFG_EESIZE_8K		1		/* 8K */
 #define AR5K_PCICFG_EESIZE_16K		2		/* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size [5211+] */
 #define AR5K_PCICFG_LED			0x00000060	/* Led status [5211+] */
 #define AR5K_PCICFG_LED_NONE		0x00000000	/* Default [5211+] */
 #define AR5K_PCICFG_LED_PEND		0x00000020	/* Scan / Auth pending */
 #define AR5K_PCICFG_LED_ASSOC		0x00000040	/* Associated */
 #define	AR5K_PCICFG_BUS_SEL		0x00000380	/* Mask for "bus select" [5211+] (?) */
-#define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX		0x00001000	/* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
@@ -882,7 +905,8 @@
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE_S	24

 /*
 * "General Purpose Input/Output" (GPIO) control register
@@ -904,8 +928,8 @@

 #define AR5K_GPIOCR		0x4014				/* Register Address */
 #define AR5K_GPIOCR_INT_ENA	0x00008000		/* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is high */
 #define AR5K_GPIOCR_IN(n)	(0 << ((n) * 2))	/* Mode 0 for pin n */
 #define AR5K_GPIOCR_OUT0(n)	(1 << ((n) * 2))	/* Mode 1 for pin n */
 #define AR5K_GPIOCR_OUT1(n)	(2 << ((n) * 2))	/* Mode 2 for pin n */
@@ -923,7 +947,6 @@
 #define AR5K_GPIODI	0x401c
 #define AR5K_GPIODI_M	0x0000002f

-
 /*
 * Silicon revision register
 */
@@ -933,7 +956,59 @@
 #define AR5K_SREV_VER		0x000000ff	/* Mask for version */
 #define AR5K_SREV_VER_S		4

+/*
+ * TXE write posting register
+ */
+#define	AR5K_TXEPOST	0x4028

+/*
+ * QCU sleep mask
+ */
+#define	AR5K_QCU_SLEEP_MASK	0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG		0x4068
+#define AR5K_5414_CBCFG_BUF_DIS	0x10	/* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define	AR5K_PCIE_PM_CTL		0x4068			/* Register address */
+/* Only 5424 */
+#define	AR5K_PCIE_PM_CTL_L1_WHEN_D2	0x00000001	/* enable PCIe core enter L1
+							when d2_sleep_en is asserted */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_CLEAR	0x00000002	/* Clear L0 and L0S counters */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_EN	0x00000004	/* Start L0 nd L0S counters */
+#define	AR5K_PCIE_PM_CTL_LDRESET_EN	0x00000008	/* Enable reset when link goes
+							down */
+/* Wake On Wireless */
+#define	AR5K_PCIE_PM_CTL_PME_EN		0x00000010	/* PME Enable */
+#define	AR5K_PCIE_PM_CTL_AUX_PWR_DET	0x00000020	/* Aux power detect */
+#define	AR5K_PCIE_PM_CTL_PME_CLEAR	0x00000040	/* Clear PME */
+#define	AR5K_PCIE_PM_CTL_PSM_D0		0x00000080
+#define	AR5K_PCIE_PM_CTL_PSM_D1		0x00000100
+#define	AR5K_PCIE_PM_CTL_PSM_D2		0x00000200
+#define	AR5K_PCIE_PM_CTL_PSM_D3		0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define	AR5K_PCIE_WAEN	0x407c
+
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define	AR5K_PCIE_SERDES	0x4080
+#define	AR5K_PCIE_SERDES_RESET	0x4084

 /*====EEPROM REGISTERS====*/

@@ -1006,13 +1081,27 @@
 * EEPROM config register
 */
 #define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO	0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT	1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT	2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT	3
 #define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
 #define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S		3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ	0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ	1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ	2
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00      /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S	8
 #define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */


+/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
 /*
 * Protocol Control Unit (PCU) registers
 */
@@ -1045,11 +1134,13 @@
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
 #define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
 #define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT	0x04000000	/* Use def. antenna for self generated frames */
 #define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Look up key when key id != 0 */
 #define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN	0x40000000	/* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST	0x80000000	/* Do key cache search for mcast frames */

 /*
 * First BSSID register (MAC address, lower 32bits)
@@ -1308,16 +1399,16 @@
 #define AR5K_DIAG_SW_LOOP_BACK_5211	0x00000040
 #define AR5K_DIAG_SW_LOOP_BACK		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100	/* Corrupted FCS */
 #define AR5K_DIAG_SW_CORR_FCS_5211	0x00000080
 #define AR5K_DIAG_SW_CORR_FCS		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200	/* Dump channel info */
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400	/* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
@@ -1326,12 +1417,15 @@
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000	/* Accept frames of non-zero protocol number */
 #define	AR5K_DIAG_SW_FRAME_NV0		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M		0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M		0x000c0000	/* Observation point select (?) */
 #define AR5K_DIAG_SW_OBSPT_S		18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH	0x0010000	/* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE	0x0020000	/* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH	0x0040000	/* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME		0x0080000	/* ??? */

 /*
 * TSF (clock) register (lower 32 bits)
@@ -1542,16 +1636,16 @@
 *
 * XXX: PCDAC steps (0.5dbm) or DBM ?
 *
- * XXX: Mask changes for newer chips to 7f
- *      like tx power table ?
 */
 #define AR5K_TXPC			0x80e8			/* Register Address */
-#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M			0x00003f00	/* CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S		22
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S		16
+#define AR5K_TXPC_DOPPLER		0x0f000000	/* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S		24

 /*
 * Profile count registers
@@ -1562,14 +1656,19 @@
 #define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */

 /*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
 */
 #define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF	0x0000ffff	/* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S	0
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN	0x00020000	/* Send ACK/CTS during quiet period */
+
 #define AR5K_QUIET_CTL2			0x8100			/* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S	0
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S	16

 /*
 * TSF parameter register
@@ -1579,12 +1678,15 @@
 #define AR5K_TSF_PARM_INC_S		0

 /*
- * QoS register (?)
+ * QoS NOACK policy
 */
-#define AR5K_QOS			0x8108			/* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+#define AR5K_QOS_NOACK			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x0000000f	/* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S	0
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000070	/* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S	4
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000180	/* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S	8

 /*
 * PHY error filter register
@@ -1609,28 +1711,14 @@
 * MIC QoS control register (?)
 */
 #define	AR5K_MIC_QOS_CTL		0x8118			/* Register Address */
-#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
-#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
-#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
-#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
-#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
-#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
-#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
-#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
+#define	AR5K_MIC_QOS_CTL_OFF(_n)	(1 << (_n * 2))
 #define	AR5K_MIC_QOS_CTL_MQ_EN		0x00010000	/* Enable MIC QoS */

 /*
 * MIC QoS select register (?)
 */
 #define	AR5K_MIC_QOS_SEL		0x811c
-#define	AR5K_MIC_QOS_SEL_0	0x00000001
-#define	AR5K_MIC_QOS_SEL_1	0x00000010
-#define	AR5K_MIC_QOS_SEL_2	0x00000100
-#define	AR5K_MIC_QOS_SEL_3	0x00001000
-#define	AR5K_MIC_QOS_SEL_4	0x00010000
-#define	AR5K_MIC_QOS_SEL_5	0x00100000
-#define	AR5K_MIC_QOS_SEL_6	0x01000000
-#define	AR5K_MIC_QOS_SEL_7	0x10000000
+#define	AR5K_MIC_QOS_SEL_OFF(_n)	(1 << (_n * 4))

 /*
 * Misc mode control register (?)
@@ -1664,6 +1752,11 @@
 */
 #define	AR5K_TSF_THRES			0x813c

+/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
 /*
 * Rate -> ACK SIFS mapping table (32 entries)
 */
@@ -1779,7 +1872,8 @@
 */
 #define	AR5K_PHY_TURBO			0x9804			/* Register Address */
 #define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
-#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Set short symbols to turbo mode */
+#define	AR5K_PHY_TURBO_MIMO		0x00000004	/* Set turbo for mimo mimo */

 /*
 * PHY agility command register
@@ -1789,6 +1883,11 @@
 #define	AR5K_PHY_TST1			0x9808
 #define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
 #define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC		0x00000002	/* Used with bit 7 (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC_S	1
+#define	AR5K_PHY_TST1_TXSRC_ALT		0x00000080	/* Set input to tsdac (?) */
+#define	AR5K_PHY_TST1_TXSRC_ALT_S	7
+

 /*
 * PHY timing register 3 [5112+]
@@ -1813,15 +1912,23 @@

 /*
 * PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
 */
 #define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
-#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* TX frame to TX data start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START_S	0

 #define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* TX end to XLNA on */
+#define	AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S	0
+
+#define	AR5K_PHY_ADC_CTL			0x982c
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF		0x00000003
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S	0
+#define	AR5K_PHY_ADC_CTL_PWD_DAC_OFF		0x00002000
+#define	AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF	0x00004000
+#define	AR5K_PHY_ADC_CTL_PWD_ADC_OFF		0x00008000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON		0x00030000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S		16

 #define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
 #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
@@ -1843,14 +1950,19 @@
 * PHY settling register
 */
 #define AR5K_PHY_SETTLING		0x9844			/* Register Address */
-#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
-#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* AGC settling time */
+#define	AR5K_PHY_SETTLING_AGC_S		0
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Switch settlig time */
+#define	AR5K_PHY_SETTLINK_SWITCH_S	7

 /*
 * PHY Gain registers
 */
 #define AR5K_PHY_GAIN			0x9848			/* Register Address */
-#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN_S	12
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX	0x007c0000
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX_S	18

 #define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
 #define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
@@ -1860,18 +1972,21 @@
 * (for more infos read ANI patent)
 */
 #define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
-#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
-#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
-#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_ADC_S	0
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA_S	8
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Total desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT_S	20

 /*
 * PHY signal register
 * (for more infos read ANI patent)
 */
 #define	AR5K_PHY_SIG			0x9858			/* Register Address */
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18

 /*
@@ -1879,9 +1994,9 @@
 * (for more infos read ANI patent)
 */
 #define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15

 /*
@@ -1890,6 +2005,8 @@
 #define	AR5K_PHY_AGCCTL			0x9860			/* Register address */
 #define	AR5K_PHY_AGCCTL_CAL		0x00000001	/* Enable PHY calibration */
 #define	AR5K_PHY_AGCCTL_NF		0x00000002	/* Enable Noise Floor calibration */
+#define	AR5K_PHY_AGCCTL_NF_EN		0x00008000	/* Enable nf calibration to happen (?) */
+#define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */

 /*
 * PHY noise floor status register
@@ -1900,7 +2017,10 @@
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62_S		12
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR_S	19

 /*
 * PHY ADC saturation register [5110]
@@ -1940,24 +2060,31 @@
 */
 #define AR5K_PHY_SCR			0x9870
 #define AR5K_PHY_SCR_32MHZ		0x0000001f
+
 #define AR5K_PHY_SLMT			0x9874
 #define AR5K_PHY_SLMT_32MHZ		0x0000007f
+
 #define AR5K_PHY_SCAL			0x9878
 #define AR5K_PHY_SCAL_32MHZ		0x0000000e

+
 /*
 * PHY PLL (Phase Locked Loop) control register
 */
 #define	AR5K_PHY_PLL			0x987c
-#define	AR5K_PHY_PLL_20MHZ		0x13	/* For half rate (?) [5111+] */
-#define	AR5K_PHY_PLL_40MHZ_5211		0x18	/* For 802.11a */
+#define	AR5K_PHY_PLL_20MHZ		0x00000013	/* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define	AR5K_PHY_PLL_40MHZ_5211		0x00000018
 #define	AR5K_PHY_PLL_40MHZ_5212		0x000000aa
+#define	AR5K_PHY_PLL_40MHZ_5413		0x00000004
 #define	AR5K_PHY_PLL_40MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define	AR5K_PHY_PLL_44MHZ_5211		0x19	/* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define	AR5K_PHY_PLL_44MHZ_5211		0x00000019
 #define	AR5K_PHY_PLL_44MHZ_5212		0x000000ab
 #define	AR5K_PHY_PLL_44MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
 #define	AR5K_PHY_PLL_HALF_RATE		0x00000100
@@ -2023,6 +2150,19 @@
 #define AR5K_PHY_RFSTG			0x98d4
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021

+/*
+ * BIN masks (?)
+ */
+#define	AR5K_PHY_BIN_MASK_1	0x9900
+#define	AR5K_PHY_BIN_MASK_2	0x9904
+#define	AR5K_PHY_BIN_MASK_3	0x9908
+
+#define	AR5K_PHY_BIN_MASK_CTL		0x990c
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4	0x00003fff
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4_S	0
+#define	AR5K_PHY_BIN_MASK_CTL_RATE	0xff000000
+#define	AR5K_PHY_BIN_MASK_CTL_RATE_S	24
+
 /*
 * PHY Antenna control register
 */
@@ -2070,6 +2210,7 @@
 #define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S	0
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
@@ -2116,7 +2257,6 @@
 #define	AR5K_PHY_PAPD_PROBE_INI_5111	0x00004883	/* [5212+] */
 #define	AR5K_PHY_PAPD_PROBE_INI_5112	0x00004882	/* [5212+] */

-
 /*
 * PHY TX rate power registers [5112+]
 */
@@ -2138,6 +2278,8 @@
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
 #define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
+#define	AR5K_PHY_FRAME_CTL_EMU		0x80000000
+#define	AR5K_PHY_FRAME_CTL_EMU_S	31
 /*---[5110/5111]---*/
 #define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
 #define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
@@ -2156,48 +2298,36 @@
 * PHY radar detection register [5111+]
 */
 #define	AR5K_PHY_RADAR			0x9954
-
-/* Radar enable 			........ ........ ........ .......1 */
 #define	AR5K_PHY_RADAR_ENABLE		0x00000001
 #define	AR5K_PHY_RADAR_DISABLE		0x00000000
-#define	AR5K_PHY_RADAR_ENABLE_S		0
-
-/* This is the value found on the card  .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define	AR5K_PHY_RADAR_PWONDEF_AR5213	0x5d50e188
-
-/* This is the value found on the card 	.1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define	AR5K_PHY_RADAR_ENABLED_AR5213	0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR    	0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S	24
-
-/* Radar RSSI/SNR threshold.		........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR    	0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S	18
-
-/* Pulse height threshold 		........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR   0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S	12
-
-/* Pulse RSSI/SNR threshold		........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR    	0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S	6
-
-/* Inband threshold  			........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e
+#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e	/* Inband threshold
+							5-bits, units unknown {0..31}
+							(? MHz ?) */
 #define AR5K_PHY_RADAR_INBANDTHR_S	1

+#define AR5K_PHY_RADAR_PRSSI_THR    	0x00000fc0	/* Pulse RSSI/SNR threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S	6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR   	0x0003f000	/* Pulse height threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S	12
+
+#define AR5K_PHY_RADAR_RSSI_THR    	0x00fc0000	/* Radar RSSI/SNR threshold.
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S	18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR	0x7f000000	/* Finite Impulse Response
+							filter power out threshold.
+							7-bits, standard power range
+							{0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS	24
+
 /*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
 */
 #define AR5K_PHY_ANT_SWITCH_TABLE_0	0x9960
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
@@ -2208,25 +2338,65 @@ after DFS is enabled */
 #define AR5K_PHY_NFTHRES		0x9968

 /*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
 */
-#define AR5K_PHY_SCLOCK			0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
-#define AR5K_PHY_SDELAY			0x99f4
-#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
-#define AR5K_PHY_SPENDING		0x99f8
-#define	AR5K_PHY_SPENDING_14		0x00000014
-#define	AR5K_PHY_SPENDING_18		0x00000018
-#define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
-#define	AR5K_PHY_SPENDING_RF5413	0x00000014
-#define	AR5K_PHY_SPENDING_RF2413	0x00000014
-#define AR5K_PHY_SPENDING_RF2425	0x00000018
+#define AR5K_PHY_SIGMA_DELTA		0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL	0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S	0
+#define AR5K_PHY_SIGMA_DELTA_FILT2	0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S	3
+#define AR5K_PHY_SIGMA_DELTA_FILT1	0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S	8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP	0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S	13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART		0x9970		/* restart */
+#define AR5K_PHY_RESTART_DIV_GC		0x001c0000	/* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S	18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ		0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST	0x00000001

 /*
- * Misc PHY/radio registers [5110 - 5111]
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7		0x9980
+#define AR5K_PHY_TIMING_8		0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2		0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S	0
+
+#define AR5K_PHY_BIN_MASK2_1		0x9988
+#define AR5K_PHY_BIN_MASK2_2		0x998c
+#define AR5K_PHY_BIN_MASK2_3		0x9990
+
+#define AR5K_PHY_BIN_MASK2_4		0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4	0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S	0
+
+#define AR_PHY_TIMING_9			0x9998
+#define AR_PHY_TIMING_10		0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2	0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S	0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11			0x99a0		/* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE	0x000fffff	/* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S	0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD		0x3ff00000	/* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S	20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC	0x40000000	/* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR	0x80000000	/* Spur filter in OFDM self correlator */
+
+/*
+ * Gain tables
 */
 #define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
@@ -2246,9 +2416,10 @@ after DFS is enabled */
 #define	AR5K_PHY_CURRENT_RSSI	0x9c1c

 /*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
 */
 #define	AR5K_PHY_RFBUS_GRANT	0x9c20
+#define	AR5K_PHY_RFBUS_GRANT_OK	0x00000001

 /*
 * PHY ADC test register
@@ -2291,6 +2462,31 @@ after DFS is enabled */
 #define	AR5K_PHY_CHAN_STATUS_RX_CLR_MAC	0x00000004
 #define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008

+/*
+ * Heavy clip enable register
+ */
+#define	AR5K_PHY_HEAVY_CLIP_ENABLE	0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK			0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
+#define AR5K_PHY_SDELAY			0x99f4
+#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
+#define AR5K_PHY_SPENDING		0x99f8
+#define AR5K_PHY_SPENDING_14		0x00000014
+#define AR5K_PHY_SPENDING_18		0x00000018
+#define AR5K_PHY_SPENDING_RF5111	0x00000018
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413	0x00000018
+#define AR5K_PHY_SPENDING_RF2413	0x00000018
+#define AR5K_PHY_SPENDING_RF2316	0x00000018
+#define AR5K_PHY_SPENDING_RF2317	0x00000018
+#define AR5K_PHY_SPENDING_RF2425	0x00000014
+
 /*
 * PHY PAPD I (power?) table (?)
 * (92! entries)
@@ -2342,6 +2538,10 @@ after DFS is enabled */
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0

+/* Same address is used for antenna diversity activation */
+#define	AR5K_PHY_FAST_ANT_DIV		0xa208
+#define	AR5K_PHY_FAST_ANT_DIV_EN	0x00002000
+
 /*
 * PHY 2GHz gain register [5111+]
 */
@@ -2349,3 +2549,36 @@ after DFS is enabled */
 #define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX		0x00fc0000
 #define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S	18
 #define	AR5K_PHY_GAIN_2GHZ_INI_5111		0x6480416c
+
+#define	AR5K_PHY_CCK_RX_CTL_4			0xa21c
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT	0x01f80000
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S	19
+
+#define	AR5K_PHY_DAG_CCK_CTL			0xa228
+#define	AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR	0x00000200
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR		0x0001fc00
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S		10
+
+#define	AR5K_PHY_FAST_ADC	0xa24c
+
+#define	AR5K_PHY_BLUETOOTH	0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define	AR5K_PHY_TPC_RG1		0xa258
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN	0x0000c000
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S	14
+
+#define	AR5K_PHY_TPC_RG5			0xa26C
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP	0x0000000F
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S	0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1	0x000003F0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S	4
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2	0x0000FC00
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S	10
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3	0x003F0000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S	16
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4	0x0FC00000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S	22
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -543,13 +543,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);

 			if (channel->hw_value == CHANNEL_G)
-				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
+				if (ah->ah_mac_srev < AR5K_SREV_AR2413)
 					ath5k_hw_reg_write(ah, 0x00f80d80,
 								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
+				else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
 					ath5k_hw_reg_write(ah, 0x00380140,
 								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
+				else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
 					ath5k_hw_reg_write(ah, 0x00fc0ec0,
 								0x994c);
 				else /* 2425 */
@@ -915,7 +915,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
 		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
 		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
-		if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
+		if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
 			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
 	}


--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -815,7 +815,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
 			break;
 		udelay(10);
 	}
-	for (i = 0x00; i < 0x0A; i++) {
+	for (i = 0x00; i < 0x19; i++) {
 		value = b43_read16(dev, 0x0690);
 		if (!(value & 0x0100))
 			break;
@@ -4543,9 +4543,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 		pdev = bus->host_pci;
 		if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320,      HP, 0x12f8) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
-		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
+		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
 			bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
 	}
 }

--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2875,6 +2875,13 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
 		goto out;
 	}

+	if (conf->flags & IEEE80211_CONF_PS)
+		ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
+	else
+		ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+	if (ret)
+		IWL_DEBUG_MAC80211("Error setting power level\n");
+
 	IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
 			   priv->tx_power_user_lmt, conf->power_level);

@@ -4236,13 +4243,13 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e

 	pci_set_master(pdev);

-	err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
 	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
 	if (err) {
-		err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (!err)
-			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+			err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 		/* both attempts failed: */
 		if (err) {
 			printk(KERN_WARNING "%s: No suitable DMA available.\n",

--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -247,8 +247,8 @@
 #define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
 #define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/

-#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT	(20)
-#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT	(4)
+#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS	(20)
+#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS	(4)
 #define RX_RB_TIMEOUT	(0x10)

 #define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL         (0x00000000)
@@ -260,6 +260,7 @@
 #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K   (0x00020000)
 #define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K   (0x00030000)

+#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY              (0x00000004)
 #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL    (0x00000000)
 #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL  (0x00001000)


--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -376,7 +376,9 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 {
 	int ret;
 	unsigned long flags;
-	unsigned int rb_size;
+	u32 rb_size;
+	const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+	const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */

 	spin_lock_irqsave(&priv->lock, flags);
 	ret = iwl_grab_nic_access(priv);
@@ -398,26 +400,32 @@ int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)

 	/* Tell device where to find RBD circular buffer in DRAM */
 	iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
-			   rxq->dma_addr >> 8);
+			   (u32)(rxq->dma_addr >> 8));

 	/* Tell device where in DRAM to update its Rx status */
 	iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
 			   (priv->shared_phys + priv->rb_closed_offset) >> 4);

-	/* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
+	/* Enable Rx DMA
+	 * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in
+	 *      the credit mechanism in 5000 HW RX FIFO
+	 * Direct rx interrupts to hosts
+	 * Rx buffer size 4 or 8k
+	 * RB timeout 0x10
+	 * 256 RBDs
+	 */
 	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
 			   FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+			   FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
 			   FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
-			   rb_size |
-			     /* 0x10 << 4 | */
-			   (RX_QUEUE_SIZE_LOG <<
-			      FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
-
-	/*
-	 * iwl_write32(priv,CSR_INT_COAL_REG,0);
-	 */
+			   rb_size|
+			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));

 	iwl_release_nic_access(priv);
+
+	iwl_write32(priv, CSR_INT_COALESCING, 0x40);
+
 	spin_unlock_irqrestore(&priv->lock, flags);

 	return 0;

--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1949,7 +1949,7 @@ int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
 	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
 	cmd.action = cpu_to_le16(CMD_ACT_SET);
 	cmd.enable = !!enable;
-	cmd.usesnr = !!enable;
+	cmd.usesnr = !!usesnr;
 	cmd.P0 = p0;
 	cmd.P1 = p1;
 	cmd.P2 = p2;

--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -32,6 +32,12 @@ int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
 int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
 		int8_t p2, int usesnr);

+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+		int8_t p1, int8_t p2);
+
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+		int8_t p2, int usesnr);
+
 int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
 		     struct cmd_header *resp);


--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -189,7 +189,6 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 #define MRVDRV_CMD_UPLD_RDY		0x0008
 #define MRVDRV_CARDEVENT		0x0010

-
 /* Automatic TX control default levels */
 #define POW_ADAPT_DEFAULT_P0 13
 #define POW_ADAPT_DEFAULT_P1 15

--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -1025,6 +1025,18 @@ static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
 				new_rate);
 			goto out;
 		}
+		if (priv->fwrelease < 0x09000000) {
+			ret = lbs_set_power_adapt_cfg(priv, 0,
+					POW_ADAPT_DEFAULT_P0,
+					POW_ADAPT_DEFAULT_P1,
+					POW_ADAPT_DEFAULT_P2);
+			if (ret)
+				goto out;
+		}
+		ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
+				TPC_DEFAULT_P2, 1);
+		if (ret)
+			goto out;
 	}

 	/* Try the newer command first (Firmware Spec 5.1 and above) */

--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -149,7 +149,8 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 		u32 code = le32_to_cpu(bootrec->code);
 		switch (code) {
 		case BR_CODE_COMPONENT_ID:
-			priv->fw_interface = be32_to_cpup(bootrec->data);
+			priv->fw_interface = be32_to_cpup((__be32 *)
+					     bootrec->data);
 			switch (priv->fw_interface) {
 			case FW_FMAC:
 				printk(KERN_INFO "p54: FreeMAC firmware\n");
@@ -181,9 +182,8 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500;
 			priv->headroom = desc->headroom;
 			priv->tailroom = desc->tailroom;
-			if (bootrec->len == 11)
-				priv->rx_mtu = (size_t) le16_to_cpu(
-					(__le16)bootrec->data[10]);
+			if (le32_to_cpu(bootrec->len) == 11)
+				priv->rx_mtu = le16_to_cpu(bootrec->rx_mtu);
 			else
 				priv->rx_mtu = (size_t)
 					0x620 - priv->tx_hdr_len;
@@ -306,11 +306,11 @@ static int p54_convert_rev1(struct ieee80211_hw *dev,
 	return 0;
 }

-const char* p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
+static const char *p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
                              "Frisbee", "Xbow", "Longbow" };
 static int p54_init_xbow_synth(struct ieee80211_hw *dev);

-int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
+static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 {
 	struct p54_common *priv = dev->priv;
 	struct eeprom_pda_wrap *wrap = NULL;
@@ -617,7 +617,7 @@ static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
 	if (!priv->eeprom)
 		return ;

-	memcpy(priv->eeprom, eeprom->data, eeprom->len);
+	memcpy(priv->eeprom, eeprom->data, le16_to_cpu(eeprom->len));

 	complete(&priv->eeprom_comp);
 }
@@ -777,8 +777,9 @@ int p54_read_eeprom(struct ieee80211_hw *dev)
 		hdr->len = cpu_to_le16(blocksize + sizeof(*eeprom_hdr));
 		eeprom_hdr->offset = cpu_to_le16(offset);
 		eeprom_hdr->len = cpu_to_le16(blocksize);
-		p54_assign_address(dev, NULL, hdr, hdr->len + sizeof(*hdr));
-	        priv->tx(dev, hdr, hdr->len + sizeof(*hdr), 0);
+		p54_assign_address(dev, NULL, hdr, le16_to_cpu(hdr->len) +
+				   sizeof(*hdr));
+		priv->tx(dev, hdr, le16_to_cpu(hdr->len) + sizeof(*hdr), 0);

 		if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) {
 			printk(KERN_ERR "%s: device does not respond!\n",
@@ -1247,18 +1248,20 @@ static void p54_configure_filter(struct ieee80211_hw *dev,

 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
 		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
-			p54_set_filter(dev, priv->filter_type, NULL);
+			p54_set_filter(dev, le16_to_cpu(priv->filter_type),
+				 NULL);
 		else
-			p54_set_filter(dev, priv->filter_type, priv->bssid);
+			p54_set_filter(dev, le16_to_cpu(priv->filter_type),
+				 priv->bssid);
 	}

 	if (changed_flags & FIF_PROMISC_IN_BSS) {
 		if (*total_flags & FIF_PROMISC_IN_BSS)
-			p54_set_filter(dev, priv->filter_type |
-				cpu_to_le16(0x8), NULL);
+			p54_set_filter(dev, le16_to_cpu(priv->filter_type) |
+				0x8, NULL);
 		else
-			p54_set_filter(dev, priv->filter_type &
-				~cpu_to_le16(0x8), priv->bssid);
+			p54_set_filter(dev, le16_to_cpu(priv->filter_type) &
+				~0x8, priv->bssid);
 	}
 }


--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -18,7 +18,8 @@
 struct bootrec {
 	__le32 code;
 	__le32 len;
-	u32 data[0];
+	u32 data[10];
+	__le16 rx_mtu;
 } __attribute__((packed));

 struct bootrec_exp_if {

--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -218,17 +218,17 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data,
 	usb_submit_urb(data_urb, GFP_ATOMIC);
 }

-__le32 p54u_lm87_chksum(const u32 *data, size_t length)
+static __le32 p54u_lm87_chksum(const u32 *data, size_t length)
 {
-	__le32 chk = 0;
+	u32 chk = 0;

 	length >>= 2;
 	while (length--) {
-		chk ^= cpu_to_le32(*data++);
+		chk ^= *data++;
 		chk = (chk >> 5) ^ (chk << 3);
 	}

-	return chk;
+	return cpu_to_le32(chk);
 }

 static void p54u_tx_lm87(struct ieee80211_hw *dev,

--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
-config RT2X00
-	tristate "Ralink driver support"
+menuconfig RT2X00
+	bool "Ralink driver support"
 	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
 	---help---
 	  This will enable the experimental support for the Ralink drivers,
@@ -17,39 +17,6 @@ config RT2X00

 if RT2X00

-config RT2X00_LIB
-	tristate
-
-config RT2X00_LIB_PCI
-	tristate
-	select RT2X00_LIB
-
-config RT2X00_LIB_USB
-	tristate
-	select RT2X00_LIB
-
-config RT2X00_LIB_FIRMWARE
-	boolean
-	depends on RT2X00_LIB
-	select FW_LOADER
-
-config RT2X00_LIB_CRYPTO
-	boolean
-	depends on RT2X00_LIB
-
-config RT2X00_LIB_RFKILL
-	boolean
-	depends on RT2X00_LIB
-	depends on RFKILL
-	default y
-
-config RT2X00_LIB_LEDS
-	boolean
-	depends on RT2X00_LIB
-	depends on NEW_LEDS
-	depends on LEDS_CLASS
-	default y
-
 config RT2400PCI
 	tristate "Ralink rt2400 (PCI/PCMCIA) support"
 	depends on PCI
@@ -109,6 +76,38 @@ config RT73USB

 	  When compiled as a module, this driver will be called "rt73usb.ko".

+config RT2X00_LIB_PCI
+	tristate
+	select RT2X00_LIB
+
+config RT2X00_LIB_USB
+	tristate
+	select RT2X00_LIB
+
+config RT2X00_LIB
+	tristate
+
+config RT2X00_LIB_FIRMWARE
+	boolean
+	select FW_LOADER
+
+config RT2X00_LIB_CRYPTO
+	boolean
+
+config RT2X00_LIB_RFKILL
+	boolean
+	default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n)
+
+comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00"
+	depends on RT2X00_LIB=y && RFKILL=m
+
+config RT2X00_LIB_LEDS
+	boolean
+	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
+
+comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
+	depends on RT2X00_LIB=y && LEDS_CLASS=m
+
 config RT2X00_LIB_DEBUGFS
 	bool "Ralink debugfs support"
 	depends on RT2X00_LIB && MAC80211_DEBUGFS

--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -190,10 +190,6 @@ const char *escape_essid(const char *essid, u8 essid_len);
 #endif
 #include <net/iw_handler.h>	/* new driver API */

-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E	/* Port Access Entity (IEEE 802.1X) */
-#endif				/* ETH_P_PAE */
-
 #define ETH_P_PREAUTH 0x88C7	/* IEEE 802.11i pre-authentication */

 #ifndef ETH_P_80211_RAW

--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -58,8 +58,9 @@ static inline int identical_mac_addr_allowed(int type1, int type2)

 static int ieee80211_open(struct net_device *dev)
 {
-	struct ieee80211_sub_if_data *sdata, *nsdata;
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *nsdata;
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	struct ieee80211_if_init_conf conf;
 	u32 changed = 0;
@@ -67,8 +68,6 @@ static int ieee80211_open(struct net_device *dev)
 	bool need_hw_reconfig = 0;
 	u8 null_addr[ETH_ALEN] = {0};

-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
 	/* fail early if user set an invalid address */
 	if (compare_ether_addr(dev->dev_addr, null_addr) &&
 	    !is_valid_ether_addr(dev->dev_addr))
@@ -512,8 +511,8 @@ static int ieee80211_stop(struct net_device *dev)

 static void ieee80211_set_multicast_list(struct net_device *dev)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
 	int allmulti, promisc, sdata_allmulti, sdata_promisc;

 	allmulti = !!(dev->flags & IFF_ALLMULTI);

--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1379,7 +1379,7 @@ ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 	return RX_QUEUED;
 }

-static ieee80211_rx_result debug_noinline
+static ieee80211_rx_result
 ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 {
 	struct ieee80211_hdr *hdr;

--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -189,7 +189,6 @@ struct sta_ampdu_mlme {
 * @last_qual: qual of last received frame from this STA
 * @last_noise: noise of last received frame from this STA
 * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
- * @wme_rx_queue: TBD
 * @tx_filtered_count: TBD
 * @tx_retry_failed: TBD
 * @tx_retry_count: TBD
@@ -199,7 +198,6 @@ struct sta_ampdu_mlme {
 * @tx_fragments: number of transmitted MPDUs
 * @last_txrate_idx: Index of the last used transmit rate
 * @tid_seq: TBD
- * @wme_tx_queue: TBD
 * @ampdu_mlme: TBD
 * @timer_to_tid: identity mapping to ID timers
 * @tid_to_tx_q: map tid to tx queue
@@ -258,9 +256,6 @@ struct sta_info {
 	int last_qual;
 	int last_noise;
 	__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
-	unsigned int wme_rx_queue[NUM_RX_DATA_QUEUES];
-#endif

 	/* Updated from TX status path only, no locking requirements */
 	unsigned long tx_filtered_count;
@@ -274,9 +269,6 @@ struct sta_info {
 	unsigned long tx_fragments;
 	unsigned int last_txrate_idx;
 	u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
-	unsigned int wme_tx_queue[NUM_RX_DATA_QUEUES];
-#endif

 	/*
 	 * Aggregation information, locked with lock.
@@ -307,10 +299,6 @@ struct sta_info {
 		struct dentry *num_ps_buf_frames;
 		struct dentry *inactive_ms;
 		struct dentry *last_seq_ctrl;
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
-		struct dentry *wme_rx_queue;
-		struct dentry *wme_tx_queue;
-#endif
 		struct dentry *agg_status;
 	} debugfs;
 #endif

--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -73,9 +73,8 @@ static int wme_downgrade_ac(struct sk_buff *skb)


 /* Indicate which queue to use.  */
-static u16 classify80211(struct sk_buff *skb, struct net_device *dev)
+static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;

 	if (!ieee80211_is_data(hdr->frame_control)) {
@@ -113,14 +112,15 @@ static u16 classify80211(struct sk_buff *skb, struct net_device *dev)

 u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
+	struct ieee80211_master_priv *mpriv = netdev_priv(dev);
+	struct ieee80211_local *local = mpriv->local;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct sta_info *sta;
 	u16 queue;
 	u8 tid;

-	queue = classify80211(skb, dev);
+	queue = classify80211(local, skb);
 	if (unlikely(queue >= local->hw.queues))
 		queue = local->hw.queues - 1;