提交 782d640a 编写于 作者: M Michał Mirosław 提交者: David S. Miller

net: atl*: convert to hw_features

Things left as they were:
 - atl1: is RX checksum really enabled?
 - atl2: copy-paste from atl1, with-errors-on-modify I presume
 - atl1c: there's a bug: MTU can't be changed if device is not up
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 dc668910
......@@ -113,11 +113,6 @@ static int atl1c_set_settings(struct net_device *netdev,
return 0;
}
static u32 atl1c_get_tx_csum(struct net_device *netdev)
{
return (netdev->features & NETIF_F_HW_CSUM) != 0;
}
static u32 atl1c_get_msglevel(struct net_device *netdev)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
......@@ -307,9 +302,6 @@ static const struct ethtool_ops atl1c_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_eeprom_len = atl1c_get_eeprom_len,
.get_eeprom = atl1c_get_eeprom,
.get_tx_csum = atl1c_get_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
};
void atl1c_set_ethtool_ops(struct net_device *netdev)
......
......@@ -484,6 +484,15 @@ static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
}
static u32 atl1c_fix_features(struct net_device *netdev, u32 features)
{
if (netdev->mtu > MAX_TSO_FRAME_SIZE)
features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
return features;
}
/*
* atl1c_change_mtu - Change the Maximum Transfer Unit
* @netdev: network interface device structure
......@@ -510,14 +519,8 @@ static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
netdev->mtu = new_mtu;
adapter->hw.max_frame_size = new_mtu;
atl1c_set_rxbufsize(adapter, netdev);
if (new_mtu > MAX_TSO_FRAME_SIZE) {
adapter->netdev->features &= ~NETIF_F_TSO;
adapter->netdev->features &= ~NETIF_F_TSO6;
} else {
adapter->netdev->features |= NETIF_F_TSO;
adapter->netdev->features |= NETIF_F_TSO6;
}
atl1c_down(adapter);
netdev_update_features(netdev);
atl1c_up(adapter);
clear_bit(__AT_RESETTING, &adapter->flags);
if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
......@@ -2585,6 +2588,7 @@ static const struct net_device_ops atl1c_netdev_ops = {
.ndo_set_mac_address = atl1c_set_mac_addr,
.ndo_set_multicast_list = atl1c_set_multi,
.ndo_change_mtu = atl1c_change_mtu,
.ndo_fix_features = atl1c_fix_features,
.ndo_do_ioctl = atl1c_ioctl,
.ndo_tx_timeout = atl1c_tx_timeout,
.ndo_get_stats = atl1c_get_stats,
......@@ -2605,12 +2609,13 @@ static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
atl1c_set_ethtool_ops(netdev);
/* TODO: add when ready */
netdev->features = NETIF_F_SG |
netdev->hw_features = NETIF_F_SG |
NETIF_F_HW_CSUM |
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_TSO |
NETIF_F_TSO6;
netdev->features = netdev->hw_features |
NETIF_F_HW_VLAN_RX;
return 0;
}
......
......@@ -382,9 +382,6 @@ static const struct ethtool_ops atl1e_ethtool_ops = {
.get_eeprom_len = atl1e_get_eeprom_len,
.get_eeprom = atl1e_get_eeprom,
.set_eeprom = atl1e_set_eeprom,
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.set_sg = ethtool_op_set_sg,
.set_tso = ethtool_op_set_tso,
};
void atl1e_set_ethtool_ops(struct net_device *netdev)
......
......@@ -1927,11 +1927,7 @@ void atl1e_down(struct atl1e_adapter *adapter)
* reschedule our watchdog timer */
set_bit(__AT_DOWN, &adapter->flags);
#ifdef NETIF_F_LLTX
netif_stop_queue(netdev);
#else
netif_tx_disable(netdev);
#endif
/* reset MAC to disable all RX/TX */
atl1e_reset_hw(&adapter->hw);
......@@ -2223,10 +2219,10 @@ static int atl1e_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
netdev->watchdog_timeo = AT_TX_WATCHDOG;
atl1e_set_ethtool_ops(netdev);
netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM |
NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
netdev->features |= NETIF_F_LLTX;
netdev->features |= NETIF_F_TSO;
netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO |
NETIF_F_HW_VLAN_TX;
netdev->features = netdev->hw_features |
NETIF_F_HW_VLAN_RX | NETIF_F_LLTX;
return 0;
}
......
......@@ -2986,6 +2986,11 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
netdev->features |= NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO;
/* is this valid? see atl1_setup_mac_ctrl() */
netdev->features |= NETIF_F_RXCSUM;
/*
* patch for some L1 of old version,
* the final version of L1 may not need these
......@@ -3595,12 +3600,6 @@ static int atl1_set_pauseparam(struct net_device *netdev,
return 0;
}
/* FIXME: is this right? -- CHS */
static u32 atl1_get_rx_csum(struct net_device *netdev)
{
return 1;
}
static void atl1_get_strings(struct net_device *netdev, u32 stringset,
u8 *data)
{
......@@ -3668,13 +3667,9 @@ static const struct ethtool_ops atl1_ethtool_ops = {
.set_ringparam = atl1_set_ringparam,
.get_pauseparam = atl1_get_pauseparam,
.set_pauseparam = atl1_set_pauseparam,
.get_rx_csum = atl1_get_rx_csum,
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_link = ethtool_op_get_link,
.set_sg = ethtool_op_set_sg,
.get_strings = atl1_get_strings,
.nway_reset = atl1_nway_reset,
.get_ethtool_stats = atl1_get_ethtool_stats,
.get_sset_count = atl1_get_sset_count,
.set_tso = ethtool_op_set_tso,
};
......@@ -1411,9 +1411,8 @@ static int __devinit atl2_probe(struct pci_dev *pdev,
err = -EIO;
#ifdef NETIF_F_HW_VLAN_TX
netdev->hw_features = NETIF_F_SG;
netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
#endif
/* Init PHY as early as possible due to power saving issue */
atl2_phy_init(&adapter->hw);
......@@ -1840,11 +1839,6 @@ static int atl2_set_settings(struct net_device *netdev,
return 0;
}
static u32 atl2_get_tx_csum(struct net_device *netdev)
{
return (netdev->features & NETIF_F_HW_CSUM) != 0;
}
static u32 atl2_get_msglevel(struct net_device *netdev)
{
return 0;
......@@ -2112,12 +2106,6 @@ static const struct ethtool_ops atl2_ethtool_ops = {
.get_eeprom_len = atl2_get_eeprom_len,
.get_eeprom = atl2_get_eeprom,
.set_eeprom = atl2_set_eeprom,
.get_tx_csum = atl2_get_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
#ifdef NETIF_F_TSO
.get_tso = ethtool_op_get_tso,
#endif
};
static void atl2_set_ethtool_ops(struct net_device *netdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册