From 77e3ea2801c8ca4700e6b17053b625b8a981ac77 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Mon, 15 Dec 2014 15:42:34 +0800 Subject: [PATCH] ASoC: rt5670: Keep sysclk on if JD func is used System clock is necessary for rt5670 JD function. We assume system clock source will be set in machine driver. So there are two things left we should do in codec driver. 1. Set sysclk to codec internal clock in probe since machine driver may not do that before JD function is registered. 2. Power up PLL once sysclk source is switched to PLL. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5670.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c index 78d85de8af6f..0a027bc94399 100644 --- a/sound/soc/codecs/rt5670.c +++ b/sound/soc/codecs/rt5670.c @@ -2190,6 +2190,13 @@ static int rt5670_set_dai_sysclk(struct snd_soc_dai *dai, if (freq == rt5670->sysclk && clk_id == rt5670->sysclk_src) return 0; + if (rt5670->pdata.jd_mode) { + if (clk_id == RT5670_SCLK_S_PLL1) + snd_soc_dapm_force_enable_pin(&codec->dapm, "PLL1"); + else + snd_soc_dapm_disable_pin(&codec->dapm, "PLL1"); + snd_soc_dapm_sync(&codec->dapm); + } switch (clk_id) { case RT5670_SCLK_S_MCLK: reg_val |= RT5670_SCLK_SRC_MCLK; @@ -2628,6 +2635,10 @@ static int rt5670_i2c_probe(struct i2c_client *i2c, } if (rt5670->pdata.jd_mode) { + regmap_update_bits(rt5670->regmap, RT5670_GLB_CLK, + RT5670_SCLK_SRC_MASK, RT5670_SCLK_SRC_RCCLK); + rt5670->sysclk = 0; + rt5670->sysclk_src = RT5670_SCLK_S_RCCLK; regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG1, RT5670_PWR_MB, RT5670_PWR_MB); regmap_update_bits(rt5670->regmap, RT5670_PWR_ANLG2, -- GitLab