From 77934269438e1a4a32f1b9a357f39422f58dcf89 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 23 Nov 2015 16:20:35 +0100 Subject: [PATCH] arm64: tegra: Add PMIC support on Jetson TX1 Add a device tree node for the MAX77620 PMIC found on the p2180 processor module (Jetson TX1). Also add supporting power supplies, such as the main 5 V system supply. Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 245 ++++++++++++++++++ .../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 55 ++++ 2 files changed, 300 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 316c92c03821..8335bbe3ab6c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -1,3 +1,5 @@ +#include + #include "tegra210.dtsi" / { @@ -5,6 +7,7 @@ compatible = "nvidia,p2180", "nvidia,tegra210"; aliases { + rtc0 = "/i2c@7000d000/pmic@3c"; rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -19,6 +22,248 @@ status = "okay"; }; + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + interrupts = ; + + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + drive-push-pull = <1>; + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + gpio2_3 { + pins = "gpio2", "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = ; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + + gpio5_6_7 { + pins = "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-push-pull = <1>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = ; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps1 { + maxim,fps-event-source = ; + maxim,suspend-fps-time-period-us = <1280>; + }; + + fps2 { + maxim,fps-event-source = ; + }; + }; + + regulators { + in-ldo0-1-supply = <&vdd_pre>; + in-ldo7-8-supply = <&vdd_pre>; + in-sd3-supply = <&vdd_5v0_sys>; + + vdd_soc: sd0 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <146>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = ; + }; + + vdd_ddr: sd1 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <130>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = ; + }; + + vdd_pre: sd2 { + regulator-name = "VDD_PRE_REG_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + + regulator-enable-ramp-delay = <176>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = ; + }; + + vdd_1v8: sd3 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <242>; + regulator-ramp-delay = <27500>; + + maxim,active-fps-source = ; + }; + + vdd_sys_1v2: ldo0 { + regulator-name = "AVDD_SYS_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <26>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vdd_pex_1v05: ldo1 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vddio_sdmmc: ldo2 { + regulator-name = "VDDIO_SDMMC"; + /* + * Technically this supply should have + * a supported range from 1.8 - 3.3 V. + * However, that would cause the SDHCI + * driver to request 2.7 V upon access + * and that in turn will cause traffic + * to be broken. Leave it at 3.3 V for + * now. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <62>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vdd_cam_hv: ldo3 { + regulator-name = "VDD_CAM_HV"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-enable-ramp-delay = <50>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vdd_rtc: ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vdd_ts_hv: ldo5 { + regulator-name = "VDD_TS_HV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-enable-ramp-delay = <62>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + vdd_ts: ldo6 { + regulator-name = "VDD_TS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-enable-ramp-delay = <36>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + maxim,active-fps-power-up-slot = <7>; + maxim,active-fps-power-down-slot = <0>; + }; + + avdd_1v05_pll: ldo7 { + regulator-name = "AVDD_1V05_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + + regulator-enable-ramp-delay = <24>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + + avdd_1v05: ldo8 { + regulator-name = "AVDD_SATA_HDMI_DP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + regulator-enable-ramp-delay = <22>; + regulator-ramp-delay = <100000>; + + maxim,active-fps-source = ; + }; + }; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a2480c0c7e72..27bb835d6bcb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1270,6 +1270,61 @@ cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_sys_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VDD_SYS_MUX"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + + regulator-enable-ramp-delay = <160>; + regulator-disable-ramp-delay = <10000>; + }; + + vdd_5v0_io: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "VDD_5V0_IO_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; -- GitLab