diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog new file mode 100644 index 0000000000000000000000000000000000000000..e1f3058f5954d062796d12feb153d5d025c38495 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog @@ -0,0 +1,60 @@ +What: /sys/firmware/opal/elog +Date: Feb 2014 +Contact: Stewart Smith +Description: + This directory exposes error log entries retrieved + through the OPAL firmware interface. + + Each error log is identified by a unique ID and will + exist until explicitly acknowledged to firmware. + + Each log entry has a directory in /sys/firmware/opal/elog. + + Log entries may be purged by the service processor + before retrieved by firmware or retrieved/acknowledged by + Linux if there is no room for more log entries. + + In the event that Linux has retrieved the log entries + but not explicitly acknowledged them to firmware and + the service processor needs more room for log entries, + the only remaining copy of a log message may be in + Linux. + + Typically, a user space daemon will monitor for new + entries, read them out and acknowledge them. + + The service processor may be able to store more log + entries than firmware can, so after you acknowledge + an event from Linux you may instantly get another one + from the queue that was generated some time in the past. + + The raw log format is a binary format. We currently + do not parse this at all in kernel, leaving it up to + user space to solve the problem. In future, we may + do more parsing in kernel and add more files to make + it easier for simple user space processes to extract + more information. + + For each log entry (directory), there are the following + files: + + id: An ASCII representation of the ID of the + error log, in hex - e.g. "0x01". + + type: An ASCII representation of the type id and + description of the type of error log. + Currently just "0x00 PEL" - platform error log. + In the future there may be additional types. + + raw: A read-only binary file that can be read + to get the raw log entry. These are + <16kb, often just hundreds of bytes and + "average" 2kb. + + acknowledge: Writing 'ack' to this file will acknowledge + the error log to firmware (and in turn + the service processor, if applicable). + Shortly after acknowledging it, the log + entry will be removed from sysfs. + Reading this file will list the supported + operations (curently just acknowledge). \ No newline at end of file diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index ad67c40c1a217955c249403678e5f73eb6fe4722..933adde1bdea13f544e836d9f0e644c2112b9ffa 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -151,6 +151,11 @@ extern int opal_enter_rtas(struct rtas_args *args, #define OPAL_LPC_READ 67 #define OPAL_LPC_WRITE 68 #define OPAL_RETURN_CPU 69 +#define OPAL_ELOG_READ 71 +#define OPAL_ELOG_WRITE 72 +#define OPAL_ELOG_ACK 73 +#define OPAL_ELOG_RESEND 74 +#define OPAL_ELOG_SIZE 75 #define OPAL_FLASH_VALIDATE 76 #define OPAL_FLASH_MANAGE 77 #define OPAL_FLASH_UPDATE 78 @@ -823,6 +828,13 @@ int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, uint32_t data, uint32_t sz); int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type, uint32_t addr, __be32 *data, uint32_t sz); + +int64_t opal_read_elog(uint64_t buffer, size_t size, uint64_t log_id); +int64_t opal_get_elog_size(uint64_t *log_id, size_t *size, uint64_t *elog_type); +int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset); +int64_t opal_send_ack_elog(uint64_t log_id); +void opal_resend_pending_logs(void); + int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result); int64_t opal_manage_flash(uint8_t op); int64_t opal_update_flash(uint64_t blk_list); @@ -863,6 +875,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm); extern unsigned long opal_get_boot_time(void); extern void opal_nvram_init(void); extern void opal_flash_init(void); +extern int opal_elog_init(void); extern int opal_machine_check(struct pt_regs *regs); extern bool opal_mce_check_early_recovery(struct pt_regs *regs); diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 8d767fde5a6ac32484bf106698d8c43e1292cd73..189fd4595161c3eeb4070e38a64ef40f6538f203 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -1,6 +1,6 @@ obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o -obj-y += rng.o +obj-y += rng.o opal-elog.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o diff --git a/arch/powerpc/platforms/powernv/opal-elog.c b/arch/powerpc/platforms/powernv/opal-elog.c new file mode 100644 index 0000000000000000000000000000000000000000..1d7355bc9db065458b9f9913ec787e6f0ffe7b89 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-elog.c @@ -0,0 +1,313 @@ +/* + * Error log support on PowerNV. + * + * Copyright 2013,2014 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct elog_obj { + struct kobject kobj; + struct bin_attribute raw_attr; + uint64_t id; + uint64_t type; + size_t size; + char *buffer; +}; +#define to_elog_obj(x) container_of(x, struct elog_obj, kobj) + +struct elog_attribute { + struct attribute attr; + ssize_t (*show)(struct elog_obj *elog, struct elog_attribute *attr, + char *buf); + ssize_t (*store)(struct elog_obj *elog, struct elog_attribute *attr, + const char *buf, size_t count); +}; +#define to_elog_attr(x) container_of(x, struct elog_attribute, attr) + +static ssize_t elog_id_show(struct elog_obj *elog_obj, + struct elog_attribute *attr, + char *buf) +{ + return sprintf(buf, "0x%llx\n", elog_obj->id); +} + +static const char *elog_type_to_string(uint64_t type) +{ + switch (type) { + case 0: return "PEL"; + default: return "unknown"; + } +} + +static ssize_t elog_type_show(struct elog_obj *elog_obj, + struct elog_attribute *attr, + char *buf) +{ + return sprintf(buf, "0x%llx %s\n", + elog_obj->type, + elog_type_to_string(elog_obj->type)); +} + +static ssize_t elog_ack_show(struct elog_obj *elog_obj, + struct elog_attribute *attr, + char *buf) +{ + return sprintf(buf, "ack - acknowledge log message\n"); +} + +static void delay_release_kobj(void *kobj) +{ + kobject_put((struct kobject *)kobj); +} + +static ssize_t elog_ack_store(struct elog_obj *elog_obj, + struct elog_attribute *attr, + const char *buf, + size_t count) +{ + opal_send_ack_elog(elog_obj->id); + sysfs_schedule_callback(&elog_obj->kobj, delay_release_kobj, + &elog_obj->kobj, THIS_MODULE); + return count; +} + +static struct elog_attribute id_attribute = + __ATTR(id, 0666, elog_id_show, NULL); +static struct elog_attribute type_attribute = + __ATTR(type, 0666, elog_type_show, NULL); +static struct elog_attribute ack_attribute = + __ATTR(acknowledge, 0660, elog_ack_show, elog_ack_store); + +static struct kset *elog_kset; + +static ssize_t elog_attr_show(struct kobject *kobj, + struct attribute *attr, + char *buf) +{ + struct elog_attribute *attribute; + struct elog_obj *elog; + + attribute = to_elog_attr(attr); + elog = to_elog_obj(kobj); + + if (!attribute->show) + return -EIO; + + return attribute->show(elog, attribute, buf); +} + +static ssize_t elog_attr_store(struct kobject *kobj, + struct attribute *attr, + const char *buf, size_t len) +{ + struct elog_attribute *attribute; + struct elog_obj *elog; + + attribute = to_elog_attr(attr); + elog = to_elog_obj(kobj); + + if (!attribute->store) + return -EIO; + + return attribute->store(elog, attribute, buf, len); +} + +static const struct sysfs_ops elog_sysfs_ops = { + .show = elog_attr_show, + .store = elog_attr_store, +}; + +static void elog_release(struct kobject *kobj) +{ + struct elog_obj *elog; + + elog = to_elog_obj(kobj); + kfree(elog->buffer); + kfree(elog); +} + +static struct attribute *elog_default_attrs[] = { + &id_attribute.attr, + &type_attribute.attr, + &ack_attribute.attr, + NULL, +}; + +static struct kobj_type elog_ktype = { + .sysfs_ops = &elog_sysfs_ops, + .release = &elog_release, + .default_attrs = elog_default_attrs, +}; + +/* Maximum size of a single log on FSP is 16KB */ +#define OPAL_MAX_ERRLOG_SIZE 16384 + +static ssize_t raw_attr_read(struct file *filep, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buffer, loff_t pos, size_t count) +{ + int opal_rc; + + struct elog_obj *elog = to_elog_obj(kobj); + + /* We may have had an error reading before, so let's retry */ + if (!elog->buffer) { + elog->buffer = kzalloc(elog->size, GFP_KERNEL); + if (!elog->buffer) + return -EIO; + + opal_rc = opal_read_elog(__pa(elog->buffer), + elog->size, elog->id); + if (opal_rc != OPAL_SUCCESS) { + pr_err("ELOG: log read failed for log-id=%llx\n", + elog->id); + kfree(elog->buffer); + elog->buffer = NULL; + return -EIO; + } + } + + memcpy(buffer, elog->buffer + pos, count); + + return count; +} + +static struct elog_obj *create_elog_obj(uint64_t id, size_t size, uint64_t type) +{ + struct elog_obj *elog; + int rc; + + elog = kzalloc(sizeof(*elog), GFP_KERNEL); + if (!elog) + return NULL; + + elog->kobj.kset = elog_kset; + + kobject_init(&elog->kobj, &elog_ktype); + + sysfs_bin_attr_init(&elog->raw_attr); + + elog->raw_attr.attr.name = "raw"; + elog->raw_attr.attr.mode = 0400; + elog->raw_attr.size = size; + elog->raw_attr.read = raw_attr_read; + + elog->id = id; + elog->size = size; + elog->type = type; + + elog->buffer = kzalloc(elog->size, GFP_KERNEL); + + if (elog->buffer) { + rc = opal_read_elog(__pa(elog->buffer), + elog->size, elog->id); + if (rc != OPAL_SUCCESS) { + pr_err("ELOG: log read failed for log-id=%llx\n", + elog->id); + kfree(elog->buffer); + elog->buffer = NULL; + } + } + + rc = kobject_add(&elog->kobj, NULL, "0x%llx", id); + if (rc) { + kobject_put(&elog->kobj); + return NULL; + } + + rc = sysfs_create_bin_file(&elog->kobj, &elog->raw_attr); + if (rc) { + kobject_put(&elog->kobj); + return NULL; + } + + kobject_uevent(&elog->kobj, KOBJ_ADD); + + return elog; +} + +static void elog_work_fn(struct work_struct *work) +{ + size_t elog_size; + uint64_t log_id; + uint64_t elog_type; + int rc; + char name[2+16+1]; + + rc = opal_get_elog_size(&log_id, &elog_size, &elog_type); + if (rc != OPAL_SUCCESS) { + pr_err("ELOG: Opal log read failed\n"); + return; + } + + BUG_ON(elog_size > OPAL_MAX_ERRLOG_SIZE); + + if (elog_size >= OPAL_MAX_ERRLOG_SIZE) + elog_size = OPAL_MAX_ERRLOG_SIZE; + + sprintf(name, "0x%llx", log_id); + + /* we may get notified twice, let's handle + * that gracefully and not create two conflicting + * entries. + */ + if (kset_find_obj(elog_kset, name)) + return; + + create_elog_obj(log_id, elog_size, elog_type); +} + +static DECLARE_WORK(elog_work, elog_work_fn); + +static int elog_event(struct notifier_block *nb, + unsigned long events, void *change) +{ + /* check for error log event */ + if (events & OPAL_EVENT_ERROR_LOG_AVAIL) + schedule_work(&elog_work); + return 0; +} + +static struct notifier_block elog_nb = { + .notifier_call = elog_event, + .next = NULL, + .priority = 0 +}; + +int __init opal_elog_init(void) +{ + int rc = 0; + + elog_kset = kset_create_and_add("elog", NULL, opal_kobj); + if (!elog_kset) { + pr_warn("%s: failed to create elog kset\n", __func__); + return -1; + } + + rc = opal_notifier_register(&elog_nb); + if (rc) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, rc); + return rc; + } + + /* We are now ready to pull error logs from opal. */ + opal_resend_pending_logs(); + + return 0; +} diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 3e8829c40fbbfc436adb206fb297b82ea7385e89..5fcbf253a870d6d4fa92ce9c5cc988b7383ee827 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -123,6 +123,11 @@ OPAL_CALL(opal_xscom_write, OPAL_XSCOM_WRITE); OPAL_CALL(opal_lpc_read, OPAL_LPC_READ); OPAL_CALL(opal_lpc_write, OPAL_LPC_WRITE); OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU); +OPAL_CALL(opal_read_elog, OPAL_ELOG_READ); +OPAL_CALL(opal_send_ack_elog, OPAL_ELOG_ACK); +OPAL_CALL(opal_get_elog_size, OPAL_ELOG_SIZE); +OPAL_CALL(opal_resend_pending_logs, OPAL_ELOG_RESEND); +OPAL_CALL(opal_write_elog, OPAL_ELOG_WRITE); OPAL_CALL(opal_validate_flash, OPAL_FLASH_VALIDATE); OPAL_CALL(opal_manage_flash, OPAL_FLASH_MANAGE); OPAL_CALL(opal_update_flash, OPAL_FLASH_UPDATE); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index d5f11d689d6c1441eb8266dacff3d7cdfda4b793..0a4493895d165cc469e7836c2790181001a78854 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -566,6 +566,8 @@ static int __init opal_init(void) /* Create "opal" kobject under /sys/firmware */ rc = opal_sysfs_init(); if (rc == 0) { + /* Setup error log interface */ + rc = opal_elog_init(); /* Setup code update interface */ opal_flash_init(); }