From 76f2b4d98c3d6a88a260275acbede99c23a24d60 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 7 Nov 2005 06:18:57 +0100 Subject: [PATCH] [PATCH] cris v10 eth: use ethtool_ops Signed-off-by: Christoph Hellwig Signed-off-by: Jeff Garzik --- drivers/net/cris/eth_v10.c | 149 ++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 78 deletions(-) diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index b68b9cad76e9..64105e4eaf31 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -409,7 +409,6 @@ static irqreturn_t e100nw_interrupt(int irq, void *dev_id, struct pt_regs *regs) static void e100_rx(struct net_device *dev); static int e100_close(struct net_device *dev); static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); -static int e100_ethtool_ioctl(struct net_device* dev, struct ifreq *ifr); static int e100_set_config(struct net_device* dev, struct ifmap* map); static void e100_tx_timeout(struct net_device *dev); static struct net_device_stats *e100_get_stats(struct net_device *dev); @@ -436,6 +435,8 @@ static void e100_reset_transceiver(struct net_device* net); static void e100_clear_network_leds(unsigned long dummy); static void e100_set_network_leds(int active); +static struct ethtool_ops e100_ethtool_ops; + static void broadcom_check_speed(struct net_device* dev); static void broadcom_check_duplex(struct net_device* dev); static void tdk_check_speed(struct net_device* dev); @@ -495,6 +496,7 @@ etrax_ethernet_init(void) dev->get_stats = e100_get_stats; dev->set_multicast_list = set_multicast_list; dev->set_mac_address = e100_set_mac_address; + dev->ethtool_ops = &e100_ethtool_ops; dev->do_ioctl = e100_ioctl; dev->set_config = e100_set_config; dev->tx_timeout = e100_tx_timeout; @@ -1448,8 +1450,6 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) spin_lock(&np->lock); /* Preempt protection */ switch (cmd) { - case SIOCETHTOOL: - return e100_ethtool_ioctl(dev,ifr); case SIOCGMIIPHY: /* Get PHY address */ data->phy_id = mdio_phy_addr; break; @@ -1486,88 +1486,81 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) return 0; } -static int -e100_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr) +static int e100_set_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) { - struct ethtool_cmd ecmd; - - if (copy_from_user(&ecmd, ifr->ifr_data, sizeof (ecmd))) - return -EFAULT; - - switch (ecmd.cmd) { - case ETHTOOL_GSET: - { - memset((void *) &ecmd, 0, sizeof (ecmd)); - ecmd.supported = - SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | + ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; - ecmd.port = PORT_TP; - ecmd.transceiver = XCVR_EXTERNAL; - ecmd.phy_address = mdio_phy_addr; - ecmd.speed = current_speed; - ecmd.duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - ecmd.advertising = ADVERTISED_TP; - if (current_duplex == autoneg && current_speed_selection == 0) - ecmd.advertising |= ADVERTISED_Autoneg; - else { - ecmd.advertising |= - ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; - if (current_speed_selection == 10) - ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full); - else if (current_speed_selection == 100) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full); - if (current_duplex == half) - ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full); - else if (current_duplex == full) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half); - } - ecmd.autoneg = AUTONEG_ENABLE; - if (copy_to_user(ifr->ifr_data, &ecmd, sizeof (ecmd))) - return -EFAULT; - } - break; - case ETHTOOL_SSET: - { - if (!capable(CAP_NET_ADMIN)) { - return -EPERM; - } - if (ecmd.autoneg == AUTONEG_ENABLE) { - e100_set_duplex(dev, autoneg); - e100_set_speed(dev, 0); - } else { - e100_set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full); - e100_set_speed(dev, ecmd.speed == SPEED_10 ? 10: 100); - } - } - break; - case ETHTOOL_GDRVINFO: - { - struct ethtool_drvinfo info; - memset((void *) &info, 0, sizeof (info)); - strncpy(info.driver, "ETRAX 100LX", sizeof(info.driver) - 1); - strncpy(info.version, "$Revision: 1.31 $", sizeof(info.version) - 1); - strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1); - strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1); - info.regdump_len = 0; - info.eedump_len = 0; - info.testinfo_len = 0; - if (copy_to_user(ifr->ifr_data, &info, sizeof (info))) - return -EFAULT; - } - break; - case ETHTOOL_NWAY_RST: - if (current_duplex == autoneg && current_speed_selection == 0) - e100_negotiate(dev); - break; - default: - return -EOPNOTSUPP; - break; + ecmd->port = PORT_TP; + ecmd->transceiver = XCVR_EXTERNAL; + ecmd->phy_address = mdio_phy_addr; + ecmd->speed = current_speed; + ecmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + ecmd->advertising = ADVERTISED_TP; + + if (current_duplex == autoneg && current_speed_selection == 0) + ecmd->advertising |= ADVERTISED_Autoneg; + else { + ecmd->advertising |= + ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; + if (current_speed_selection == 10) + ecmd->advertising &= ~(ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full); + else if (current_speed_selection == 100) + ecmd->advertising &= ~(ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full); + if (current_duplex == half) + ecmd->advertising &= ~(ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Full); + else if (current_duplex == full) + ecmd->advertising &= ~(ADVERTISED_10baseT_Half | + ADVERTISED_100baseT_Half); + } + + ecmd->autoneg = AUTONEG_ENABLE; + return 0; +} + +static int e100_set_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) +{ + if (ecmd->autoneg == AUTONEG_ENABLE) { + e100_set_duplex(dev, autoneg); + e100_set_speed(dev, 0); + } else { + e100_set_duplex(dev, ecmd->duplex == DUPLEX_HALF ? half : full); + e100_set_speed(dev, ecmd->speed == SPEED_10 ? 10: 100); } + + return 0; +} + +static void e100_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strncpy(info->driver, "ETRAX 100LX", sizeof(info->driver) - 1); + strncpy(info->version, "$Revision: 1.31 $", sizeof(info->version) - 1); + strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1); + strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1); +} + +static int e100_nway_reset(struct net_device *dev) +{ + if (current_duplex == autoneg && current_speed_selection == 0) + e100_negotiate(dev); return 0; } +static struct ethtool_ops e100_ethtool_ops = { + .get_settings = e100_get_settings, + .set_settings = e100_set_settings, + .get_drvinfo = e100_get_drvinfo, + .nway_reset = e100_nway_reset, + .get_link = ethtool_op_get_link, +}; + static int e100_set_config(struct net_device *dev, struct ifmap *map) { -- GitLab