提交 7638699c 编写于 作者: B Ben Hutchings 提交者: Mauro Carvalho Chehab

V4L/DVB: lgs8gxx: remove firmware for lgs8g75

The recently added support for lgs8g75 included some 8051 machine code
without accompanying source code.  Replace this with use of the
firmware loader.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 73c994e4
......@@ -584,6 +584,7 @@ config DVB_LGS8GL5
config DVB_LGS8GXX
tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator"
depends on DVB_CORE && I2C
select FW_LOADER
default m if DVB_FE_CUSTOMISE
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
......
......@@ -24,6 +24,7 @@
*/
#include <asm/div64.h>
#include <linux/firmware.h>
#include "dvb_frontend.h"
......@@ -46,42 +47,6 @@ module_param(fake_signal_str, int, 0644);
MODULE_PARM_DESC(fake_signal_str, "fake signal strength for LGS8913."
"Signal strength calculation is slow.(default:on).");
static const u8 lgs8g75_initdat[] = {
0x01, 0x30, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0xE4, 0xF5, 0xA8, 0xF5, 0xB8, 0xF5, 0x88, 0xF5,
0x89, 0xF5, 0x87, 0x75, 0xD0, 0x00, 0x11, 0x50,
0x11, 0x50, 0xF4, 0xF5, 0x80, 0xF5, 0x90, 0xF5,
0xA0, 0xF5, 0xB0, 0x75, 0x81, 0x30, 0x80, 0x01,
0x32, 0x90, 0x80, 0x12, 0x74, 0xFF, 0xF0, 0x90,
0x80, 0x13, 0x74, 0x1F, 0xF0, 0x90, 0x80, 0x23,
0x74, 0x01, 0xF0, 0x90, 0x80, 0x22, 0xF0, 0x90,
0x00, 0x48, 0x74, 0x00, 0xF0, 0x90, 0x80, 0x4D,
0x74, 0x05, 0xF0, 0x90, 0x80, 0x09, 0xE0, 0x60,
0x21, 0x12, 0x00, 0xDD, 0x14, 0x60, 0x1B, 0x12,
0x00, 0xDD, 0x14, 0x60, 0x15, 0x12, 0x00, 0xDD,
0x14, 0x60, 0x0F, 0x12, 0x00, 0xDD, 0x14, 0x60,
0x09, 0x12, 0x00, 0xDD, 0x14, 0x60, 0x03, 0x12,
0x00, 0xDD, 0x90, 0x80, 0x42, 0xE0, 0x60, 0x0B,
0x14, 0x60, 0x0C, 0x14, 0x60, 0x0D, 0x14, 0x60,
0x0E, 0x01, 0xB3, 0x74, 0x04, 0x01, 0xB9, 0x74,
0x05, 0x01, 0xB9, 0x74, 0x07, 0x01, 0xB9, 0x74,
0x0A, 0xC0, 0xE0, 0x74, 0xC8, 0x12, 0x00, 0xE2,
0xD0, 0xE0, 0x14, 0x70, 0xF4, 0x90, 0x80, 0x09,
0xE0, 0x70, 0xAE, 0x12, 0x00, 0xF6, 0x12, 0x00,
0xFE, 0x90, 0x00, 0x48, 0xE0, 0x04, 0xF0, 0x90,
0x80, 0x4E, 0xF0, 0x01, 0x73, 0x90, 0x80, 0x08,
0xF0, 0x22, 0xF8, 0x7A, 0x0C, 0x79, 0xFD, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xD9,
0xF6, 0xDA, 0xF2, 0xD8, 0xEE, 0x22, 0x90, 0x80,
0x65, 0xE0, 0x54, 0xFD, 0xF0, 0x22, 0x90, 0x80,
0x65, 0xE0, 0x44, 0xC2, 0xF0, 0x22
};
/* LGS8GXX internal helper functions */
static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
......@@ -627,9 +592,14 @@ static int lgs8913_init(struct lgs8gxx_state *priv)
static int lgs8g75_init_data(struct lgs8gxx_state *priv)
{
const u8 *p = lgs8g75_initdat;
const struct firmware *fw;
int rc;
int i;
rc = request_firmware(&fw, "lgs8g75.fw", &priv->i2c->dev);
if (rc)
return rc;
lgs8gxx_write_reg(priv, 0xC6, 0x40);
lgs8gxx_write_reg(priv, 0x3D, 0x04);
......@@ -640,16 +610,16 @@ static int lgs8g75_init_data(struct lgs8gxx_state *priv)
lgs8gxx_write_reg(priv, 0x3B, 0x00);
lgs8gxx_write_reg(priv, 0x38, 0x00);
for (i = 0; i < sizeof(lgs8g75_initdat); i++) {
for (i = 0; i < fw->size; i++) {
lgs8gxx_write_reg(priv, 0x38, 0x00);
lgs8gxx_write_reg(priv, 0x3A, (u8)(i&0xff));
lgs8gxx_write_reg(priv, 0x3B, (u8)(i>>8));
lgs8gxx_write_reg(priv, 0x3C, *p);
p++;
lgs8gxx_write_reg(priv, 0x3C, fw->data[i]);
}
lgs8gxx_write_reg(priv, 0x38, 0x00);
release_firmware(fw);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册