From 7618138d8b40adfea7660ccabbb6b131d72e444b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Wed, 31 May 2017 20:05:35 +0300 Subject: [PATCH] drm/i915/ddi: Avoid long delays during system suspend / eDP disabling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Atm disabling either DP or eDP outputs can generate a spurious short pulse interrupt. The reason is that after disabling the port the source will stop sending a valid stream data, while the sink expects either a valid stream or the idle pattern. Since neither of this is sent the sink assumes (after an arbitrary delay) that the link is lost and requests for link retraining with a short pulse. The spurious pulse is a real problem at least for eDP panels with long power-off / power-cycle delays: as part of disabling the output we disable the panel power. The subsequent spurious short pulse handling will have to turn the power back on, which means the driver has to do a redundant wait for the power-off and power-cycle delays. During system suspend this leads to an unnecessary delay up to ~1s on systems with such panels as reported by Rui. To fix this put the sink to DPMS D3 state before turning off the port. According to the DP spec in this state the sink should not request retraining. This is also what we do already on pre-ddi platforms. As an alternative I also tried configuring the port to send idle pattern - which is against BSPec - and leave the port in normal mode before turning off the port. Neither of these resolved the problem. Cc: Zhang Rui Cc: David Weinehall Cc: Ville Syrjälä Reported-and-tested-by: Zhang Rui Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1496250335-7627-1-git-send-email-imre.deak@intel.com --- drivers/gpu/drm/i915/intel_ddi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 0914ad96a71b..8bac62805cd1 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1732,12 +1732,18 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder, struct drm_i915_private *dev_priv = to_i915(encoder->dev); enum port port = intel_ddi_get_encoder_port(intel_encoder); struct intel_digital_port *dig_port = enc_to_dig_port(encoder); + struct intel_dp *intel_dp = NULL; int type = intel_encoder->type; uint32_t val; bool wait = false; /* old_crtc_state and old_conn_state are NULL when called from DP_MST */ + if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { + intel_dp = enc_to_intel_dp(encoder); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + } + val = I915_READ(DDI_BUF_CTL(port)); if (val & DDI_BUF_CTL_ENABLE) { val &= ~DDI_BUF_CTL_ENABLE; @@ -1753,9 +1759,7 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder, if (wait) intel_wait_ddi_buf_idle(dev_priv, port); - if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { - struct intel_dp *intel_dp = enc_to_intel_dp(encoder); - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + if (intel_dp) { intel_edp_panel_vdd_on(intel_dp); intel_edp_panel_off(intel_dp); } -- GitLab