From 75baf69657ea2107f2c202cd29dada206ae4b7c4 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 8 Jun 2010 18:31:21 -0400 Subject: [PATCH] [SCSI] lpfc 8.3.14: PCI fixes and enhancements - Allow enabling MSI-X intterupts with fewer vectors than requested by looking at the return value from pci_enable_msix. - Implemented driver PCI AER error handling routines for supporting AER error recovering on SLI4 devices. - Remove redundant SLI_ACTIVE checks Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 22 +--- drivers/scsi/lpfc/lpfc_init.c | 195 +++++++++++++++++++++++++++++++--- drivers/scsi/lpfc/lpfc_scsi.c | 10 +- drivers/scsi/lpfc/lpfc_sli.c | 41 +++++-- drivers/scsi/lpfc/lpfc_sli4.h | 1 + 5 files changed, 228 insertions(+), 41 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 39b0760c438d..a7c6b7390554 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -864,7 +864,6 @@ lpfc_get_hba_info(struct lpfc_hba *phba, uint32_t *mrpi, uint32_t *arpi, uint32_t *mvpi, uint32_t *avpi) { - struct lpfc_sli *psli = &phba->sli; struct lpfc_mbx_read_config *rd_config; LPFC_MBOXQ_t *pmboxq; MAILBOX_t *pmb; @@ -893,8 +892,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba, pmb->mbxOwner = OWN_HOST; pmboxq->context1 = NULL; - if ((phba->pport->fc_flag & FC_OFFLINE_MODE) || - (!(psli->sli_flag & LPFC_SLI_ACTIVE))) + if (phba->pport->fc_flag & FC_OFFLINE_MODE) rc = MBX_NOT_FINISHED; else rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); @@ -2943,9 +2941,6 @@ lpfc_aer_support_store(struct device *dev, struct device_attribute *attr, struct lpfc_hba *phba = vport->phba; int val = 0, rc = -EINVAL; - /* AER not supported on OC devices yet */ - if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) - return -EPERM; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) @@ -3018,12 +3013,6 @@ lpfc_param_show(aer_support) static int lpfc_aer_support_init(struct lpfc_hba *phba, int val) { - /* AER not supported on OC devices yet */ - if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) { - phba->cfg_aer_support = 0; - return -EPERM; - } - if (val == 0 || val == 1) { phba->cfg_aer_support = val; return 0; @@ -3068,9 +3057,6 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, struct lpfc_hba *phba = vport->phba; int val, rc = -1; - /* AER not supported on OC devices yet */ - if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) - return -EPERM; if (!isdigit(buf[0])) return -EINVAL; if (sscanf(buf, "%i", &val) != 1) @@ -4099,8 +4085,7 @@ lpfc_get_stats(struct Scsi_Host *shost) pmboxq->context1 = NULL; pmboxq->vport = vport; - if ((vport->fc_flag & FC_OFFLINE_MODE) || - (!(psli->sli_flag & LPFC_SLI_ACTIVE))) + if (vport->fc_flag & FC_OFFLINE_MODE) rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); else rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); @@ -4124,8 +4109,7 @@ lpfc_get_stats(struct Scsi_Host *shost) pmboxq->context1 = NULL; pmboxq->vport = vport; - if ((vport->fc_flag & FC_OFFLINE_MODE) || - (!(psli->sli_flag & LPFC_SLI_ACTIVE))) + if (vport->fc_flag & FC_OFFLINE_MODE) rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); else rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 184e45f286d2..08db674ec580 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -7030,22 +7030,28 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba) static int lpfc_sli4_enable_msix(struct lpfc_hba *phba) { - int rc, index; + int vectors, rc, index; /* Set up MSI-X multi-message vectors */ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++) phba->sli4_hba.msix_entries[index].entry = index; /* Configure MSI-X capability structure */ + vectors = phba->sli4_hba.cfg_eqn; +enable_msix_vectors: rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries, - phba->sli4_hba.cfg_eqn); - if (rc) { + vectors); + if (rc > 1) { + vectors = rc; + goto enable_msix_vectors; + } else if (rc) { lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0484 PCI enable MSI-X failed (%d)\n", rc); goto msi_fail_out; } + /* Log MSI-X vector assignment */ - for (index = 0; index < phba->sli4_hba.cfg_eqn; index++) + for (index = 0; index < vectors; index++) lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0489 MSI-X entry[%d]: vector=x%x " "message=%d\n", index, @@ -7067,7 +7073,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba) } /* The rest of the vector(s) are associated to fast-path handler(s) */ - for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) { + for (index = 1; index < vectors; index++) { phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1; phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba; rc = request_irq(phba->sli4_hba.msix_entries[index].vector, @@ -7081,6 +7087,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba) goto cfg_fail_out; } } + phba->sli4_hba.msix_vec_nr = vectors; return rc; @@ -7114,9 +7121,10 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba) /* Free up MSI-X multi-message vectors */ free_irq(phba->sli4_hba.msix_entries[0].vector, phba); - for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) + for (index = 1; index < phba->sli4_hba.msix_vec_nr; index++) free_irq(phba->sli4_hba.msix_entries[index].vector, &phba->sli4_hba.fcp_eq_hdl[index - 1]); + /* Disable MSI-X */ pci_disable_msix(phba->pcidev); @@ -7158,6 +7166,7 @@ lpfc_sli4_enable_msi(struct lpfc_hba *phba) pci_disable_msi(phba->pcidev); lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0490 MSI request_irq failed (%d)\n", rc); + return rc; } for (index = 0; index < phba->cfg_fcp_eq_count; index++) { @@ -7165,7 +7174,7 @@ lpfc_sli4_enable_msi(struct lpfc_hba *phba) phba->sli4_hba.fcp_eq_hdl[index].phba = phba; } - return rc; + return 0; } /** @@ -7876,6 +7885,9 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2710 PCI channel disable preparing for reset\n"); + /* Block any management I/Os to the device */ + lpfc_block_mgmt_io(phba); + /* Block all SCSI devices' I/Os on the host */ lpfc_scsi_dev_block(phba); @@ -7885,6 +7897,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) /* Disable interrupt and pci device */ lpfc_sli_disable_intr(phba); pci_disable_device(phba->pcidev); + /* Flush all driver's outstanding SCSI I/Os as we are to reset */ lpfc_sli_flush_fcp_rings(phba); } @@ -7898,7 +7911,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) * pending I/Os. **/ static void -lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba) +lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba *phba) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2711 PCI channel permanent disable for failure\n"); @@ -7947,7 +7960,7 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) return PCI_ERS_RESULT_NEED_RESET; case pci_channel_io_perm_failure: /* Permanent failure, prepare for device down */ - lpfc_prep_dev_for_perm_failure(phba); + lpfc_sli_prep_dev_for_perm_failure(phba); return PCI_ERS_RESULT_DISCONNECT; default: /* Unknown state, prepare and request slot reset */ @@ -8016,7 +8029,8 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev) } else phba->intr_mode = intr_mode; - /* Take device offline; this will perform cleanup */ + /* Take device offline, it will perform cleanup */ + lpfc_offline_prep(phba); lpfc_offline(phba); lpfc_sli_brdrestart(phba); @@ -8201,6 +8215,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Default to single FCP EQ for non-MSI-X */ if (phba->intr_type != MSIX) phba->cfg_fcp_eq_count = 1; + else if (phba->sli4_hba.msix_vec_nr < phba->cfg_fcp_eq_count) + phba->cfg_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -8362,7 +8378,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg) struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "0298 PCI device Power Management suspend.\n"); + "2843 PCI device Power Management suspend.\n"); /* Bring down the device */ lpfc_offline_prep(phba); @@ -8452,6 +8468,84 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev) return 0; } +/** + * lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to prepare the SLI4 device for PCI slot recover. It + * aborts all the outstanding SCSI I/Os to the pci device. + **/ +static void +lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba) +{ + struct lpfc_sli *psli = &phba->sli; + struct lpfc_sli_ring *pring; + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2828 PCI channel I/O abort preparing for recovery\n"); + /* + * There may be errored I/Os through HBA, abort all I/Os on txcmplq + * and let the SCSI mid-layer to retry them to recover. + */ + pring = &psli->ring[psli->fcp_ring]; + lpfc_sli_abort_iocb_ring(phba, pring); +} + +/** + * lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to prepare the SLI4 device for PCI slot reset. It + * disables the device interrupt and pci device, and aborts the internal FCP + * pending I/Os. + **/ +static void +lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba) +{ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2826 PCI channel disable preparing for reset\n"); + + /* Block any management I/Os to the device */ + lpfc_block_mgmt_io(phba); + + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + + /* stop all timers */ + lpfc_stop_hba_timers(phba); + + /* Disable interrupt and pci device */ + lpfc_sli4_disable_intr(phba); + pci_disable_device(phba->pcidev); + + /* Flush all driver's outstanding SCSI I/Os as we are to reset */ + lpfc_sli_flush_fcp_rings(phba); +} + +/** + * lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable + * @phba: pointer to lpfc hba data structure. + * + * This routine is called to prepare the SLI4 device for PCI slot permanently + * disabling. It blocks the SCSI transport layer traffic and flushes the FCP + * pending I/Os. + **/ +static void +lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba *phba) +{ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2827 PCI channel permanent disable for failure\n"); + + /* Block all SCSI devices' I/Os on the host */ + lpfc_scsi_dev_block(phba); + + /* stop all timers */ + lpfc_stop_hba_timers(phba); + + /* Clean up all driver's outstanding SCSI I/Os */ + lpfc_sli_flush_fcp_rings(phba); +} + /** * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device * @pdev: pointer to PCI device. @@ -8471,7 +8565,29 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev) static pci_ers_result_t lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state) { - return PCI_ERS_RESULT_NEED_RESET; + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + switch (state) { + case pci_channel_io_normal: + /* Non-fatal error, prepare for recovery */ + lpfc_sli4_prep_dev_for_recover(phba); + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + /* Fatal error, prepare for slot reset */ + lpfc_sli4_prep_dev_for_reset(phba); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + /* Permanent failure, prepare for device down */ + lpfc_sli4_prep_dev_for_perm_failure(phba); + return PCI_ERS_RESULT_DISCONNECT; + default: + /* Unknown state, prepare and request slot reset */ + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2825 Unknown PCI error state: x%x\n", state); + lpfc_sli4_prep_dev_for_reset(phba); + return PCI_ERS_RESULT_NEED_RESET; + } } /** @@ -8495,6 +8611,39 @@ lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state) static pci_ers_result_t lpfc_io_slot_reset_s4(struct pci_dev *pdev) { + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + struct lpfc_sli *psli = &phba->sli; + uint32_t intr_mode; + + dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n"); + if (pci_enable_device_mem(pdev)) { + printk(KERN_ERR "lpfc: Cannot re-enable " + "PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + + pci_restore_state(pdev); + if (pdev->is_busmaster) + pci_set_master(pdev); + + spin_lock_irq(&phba->hbalock); + psli->sli_flag &= ~LPFC_SLI_ACTIVE; + spin_unlock_irq(&phba->hbalock); + + /* Configure and enable interrupt */ + intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode); + if (intr_mode == LPFC_INTR_ERROR) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2824 Cannot re-enable interrupt after " + "slot reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } else + phba->intr_mode = intr_mode; + + /* Log the current active interrupt mode */ + lpfc_log_intr_mode(phba, phba->intr_mode); + return PCI_ERS_RESULT_RECOVERED; } @@ -8511,7 +8660,27 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev) static void lpfc_io_resume_s4(struct pci_dev *pdev) { - return; + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; + + /* + * In case of slot reset, as function reset is performed through + * mailbox command which needs DMA to be enabled, this operation + * has to be moved to the io resume phase. Taking device offline + * will perform the necessary cleanup. + */ + if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) { + /* Perform device reset */ + lpfc_offline_prep(phba); + lpfc_offline(phba); + lpfc_sli_brdrestart(phba); + /* Bring the device back online */ + lpfc_online(phba); + } + + /* Clean up Advanced Error Reporting (AER) if needed */ + if (phba->hba_flag & HBA_AER_ENABLED) + pci_cleanup_aer_uncorrect_error_status(pdev); } /** diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c6bdf63925d9..f68753ea941f 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -2295,15 +2295,21 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn, struct lpfc_vport *vport = pIocbIn->vport; struct lpfc_rport_data *rdata = lpfc_cmd->rdata; struct lpfc_nodelist *pnode = rdata->pnode; - struct scsi_cmnd *cmd = lpfc_cmd->pCmd; + struct scsi_cmnd *cmd; int result; struct scsi_device *tmp_sdev; int depth; unsigned long flags; struct lpfc_fast_path_event *fast_path_evt; - struct Scsi_Host *shost = cmd->device->host; + struct Scsi_Host *shost; uint32_t queue_depth, scsi_id; + /* Sanity check on return of outstanding command */ + if (!(lpfc_cmd->pCmd)) + return; + cmd = lpfc_cmd->pCmd; + shost = cmd->device->host; + lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4]; lpfc_cmd->status = pIocbOut->iocb.ulpStatus; /* pick up SLI4 exhange busy status from HBA */ diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index ae3cb0ab0ae4..9c609546b4ef 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -3593,13 +3593,16 @@ static int lpfc_sli_brdrestart_s4(struct lpfc_hba *phba) { struct lpfc_sli *psli = &phba->sli; - + uint32_t hba_aer_enabled; /* Restart HBA */ lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "0296 Restart HBA Data: x%x x%x\n", phba->pport->port_state, psli->sli_flag); + /* Take PCIe device Advanced Error Reporting (AER) state */ + hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED; + lpfc_sli4_brdreset(phba); spin_lock_irq(&phba->hbalock); @@ -3611,6 +3614,10 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba) memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets)); psli->stats_start = get_seconds(); + /* Reset HBA AER if it was enabled, note hba_flag was reset above */ + if (hba_aer_enabled) + pci_disable_pcie_error_reporting(phba->pcidev); + lpfc_hba_down_post(phba); return 0; @@ -4554,6 +4561,24 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) /* Start error attention (ERATT) polling timer */ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL); + /* Enable PCIe device Advanced Error Reporting (AER) if configured */ + if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) { + rc = pci_enable_pcie_error_reporting(phba->pcidev); + if (!rc) { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "2829 This device supports " + "Advanced Error Reporting (AER)\n"); + spin_lock_irq(&phba->hbalock); + phba->hba_flag |= HBA_AER_ENABLED; + spin_unlock_irq(&phba->hbalock); + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "2830 This device does not support " + "Advanced Error Reporting (AER)\n"); + phba->cfg_aer_support = 0; + } + } + /* * The port is ready, set the host's link state to LINK_DOWN * in preparation for link interrupts. @@ -9089,9 +9114,10 @@ lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe) } } if (unlikely(!cq)) { - lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "0365 Slow-path CQ identifier (%d) does " - "not exist\n", cqid); + if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "0365 Slow-path CQ identifier " + "(%d) does not exist\n", cqid); return; } @@ -9321,9 +9347,10 @@ lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe, cq = phba->sli4_hba.fcp_cq[fcp_cqidx]; if (unlikely(!cq)) { - lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "0367 Fast-path completion queue does not " - "exist\n"); + if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "0367 Fast-path completion queue " + "does not exist\n"); return; } diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 1f8ec72c5dcb..ccdb95774e84 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -382,6 +382,7 @@ struct lpfc_sli4_hba { struct lpfc_pc_sli4_params pc_sli4_params; struct msix_entry *msix_entries; uint32_t cfg_eqn; + uint32_t msix_vec_nr; struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */ /* Pointers to the constructed SLI4 queues */ struct lpfc_queue **fp_eq; /* Fast-path event queue */ -- GitLab