From 756515c6267a580aecc67d114bb289dd30a466a1 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Fri, 13 May 2011 11:17:16 +0530 Subject: [PATCH] mmc: sdhci-pxa: add platform code for UHS signaling Marvell controller requires 1.8V bit in UHS control register 2 be set when doing UHS. eMMC does not require 1.8V for DDR. add platform code to handle this. Signed-off-by: Philip Rakity Reviewed-by: Arindam Nath Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pxa.c | 41 ++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c index 5a61208cbc66..1dc9debf6a7f 100644 --- a/drivers/mmc/host/sdhci-pxa.c +++ b/drivers/mmc/host/sdhci-pxa.c @@ -69,7 +69,45 @@ static void set_clock(struct sdhci_host *host, unsigned int clock) } } +static int set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) +{ + u16 ctrl_2; + + /* + * Set V18_EN -- UHS modes do not work without this. + * does not change signaling voltage + */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + switch (uhs) { + case MMC_TIMING_UHS_SDR12: + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + break; + case MMC_TIMING_UHS_SDR25: + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + break; + case MMC_TIMING_UHS_SDR50: + ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_SDR104: + ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; + break; + case MMC_TIMING_UHS_DDR50: + ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; + break; + } + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + pr_debug("%s:%s uhs = %d, ctrl_2 = %04X\n", + __func__, mmc_hostname(host->mmc), uhs, ctrl_2); + + return 0; +} + static struct sdhci_ops sdhci_pxa_ops = { + .set_uhs_signaling = set_uhs_signaling, .set_clock = set_clock, }; @@ -141,6 +179,9 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev) if (pdata->quirks) host->quirks |= pdata->quirks; + /* enable 1/8V DDR capable */ + host->mmc->caps |= MMC_CAP_1_8V_DDR; + /* If slot design supports 8 bit data, indicate this to MMC. */ if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) host->mmc->caps |= MMC_CAP_8_BIT_DATA; -- GitLab