Merge drm-next into drm-intel-next-queued

Pull 4.15 into drm-intel-next-queued for next feature pull.
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

.mailmap

@@ -107,6 +107,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Mark Brown <broonie@sirena.org.uk>
+Mark Yao <markyao0591@gmail.com> <mark.yao@rock-chips.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
 Matthieu CASTET <castet.matthieu@free.fr>

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -375,3 +375,19 @@ Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	information about CPUs heterogeneity.
 
 		cpu_capacity: capacity of cpu#.
+
+What:		/sys/devices/system/cpu/vulnerabilities
+		/sys/devices/system/cpu/vulnerabilities/meltdown
+		/sys/devices/system/cpu/vulnerabilities/spectre_v1
+		/sys/devices/system/cpu/vulnerabilities/spectre_v2
+Date:		January 2018
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Information about CPU vulnerabilities
+
+		The files are named after the code names of CPU
+		vulnerabilities. The output of those files reflects the
+		state of the CPUs in the system. Possible output values:
+
+		"Not affected"	  CPU is not affected by the vulnerability
+		"Vulnerable"	  CPU is affected and no mitigation in effect
+		"Mitigation: $M"  CPU is affected and mitigation $M is in effect

Documentation/admin-guide/kernel-parameters.rst

@@ -109,6 +109,7 @@ parameter is applicable::
 	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
+	ISOL	CPU Isolation is enabled.
 	JOY	Appropriate joystick support is enabled.
 	KGDB	Kernel debugger support is enabled.
 	KVM	Kernel Virtual Machine support is enabled.

Documentation/admin-guide/kernel-parameters.txt

@@ -328,11 +328,15 @@
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
+			For X86-32, this can also be used to specify an APIC
+			driver name.
+			Format: apic=driver_name
+			Examples: apic=bigsmp
 
 	apic_extnmi=	[APIC,X86] External NMI delivery setting
 			Format: { bsp (default) | all | none }
@@ -709,9 +713,6 @@
 			It will be ignored when crashkernel=X,high is not used
 			or memory reserved is below 4G.
 
-	crossrelease_fullstack
-			[KNL] Allow to record full stack trace in cross-release
-
 	cryptomgr.notests
                         [KNL] Disable crypto self-tests
 
@@ -1737,7 +1738,7 @@
 	isapnp=		[ISAPNP]
 			Format: <RDP>,<reset>,<pci_scan>,<verbosity>
 
-	isolcpus=	[KNL,SMP] Isolate a given set of CPUs from disturbance.
+	isolcpus=	[KNL,SMP,ISOL] Isolate a given set of CPUs from disturbance.
 			[Deprecated - use cpusets instead]
 			Format: [flag-list,]<cpu-list>
 
@@ -2622,6 +2623,11 @@
 	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
 			Equivalent to smt=1.
 
+	nospectre_v2	[X86] Disable all mitigations for the Spectre variant 2
+			(indirect branch prediction) vulnerability. System may
+			allow data leaks with this option, which is equivalent
+			to spectre_v2=off.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
@@ -2662,7 +2668,7 @@
 			Valid arguments: on, off
 			Default: on
 
-	nohz_full=	[KNL,BOOT]
+	nohz_full=	[KNL,BOOT,SMP,ISOL]
 			The argument is a cpu list, as described above.
 			In kernels built with CONFIG_NO_HZ_FULL=y, set
 			the specified list of CPUs whose tick will be stopped
@@ -3094,6 +3100,12 @@
 		pcie_scan_all	Scan all possible PCIe devices.  Otherwise we
 				only look for one device below a PCIe downstream
 				port.
+		big_root_window	Try to add a big 64bit memory window to the PCIe
+				root complex on AMD CPUs. Some GFX hardware
+				can resize a BAR to allow access to all VRAM.
+				Adding the window is slightly risky (it may
+				conflict with unreported devices), so this
+				taints the kernel.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.
@@ -3282,6 +3294,21 @@
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
+	pti=		[X86_64] Control Page Table Isolation of user and
+			kernel address spaces.  Disabling this feature
+			removes hardening, but improves performance of
+			system calls and interrupts.
+
+			on   - unconditionally enable
+			off  - unconditionally disable
+			auto - kernel detects whether your CPU model is
+			       vulnerable to issues that PTI mitigates
+
+			Not specifying this option is equivalent to pti=auto.
+
+	nopti		[X86_64]
+			Equivalent to pti=off
+
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.
@@ -3931,6 +3958,29 @@
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/laptops/sonypi.txt
 
+	spectre_v2=	[X86] Control mitigation of Spectre variant 2
+			(indirect branch speculation) vulnerability.
+
+			on   - unconditionally enable
+			off  - unconditionally disable
+			auto - kernel detects whether your CPU model is
+			       vulnerable
+
+			Selecting 'on' will, and 'auto' may, choose a
+			mitigation method at run time according to the
+			CPU, the available microcode, the setting of the
+			CONFIG_RETPOLINE configuration option, and the
+			compiler with which the kernel was built.
+
+			Specific mitigations can also be selected manually:
+
+			retpoline	  - replace indirect branches
+			retpoline,generic - google's original retpoline
+			retpoline,amd     - AMD-specific minimal thunk
+
+			Not specifying this option is equivalent to
+			spectre_v2=auto.
+
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/admin-guide/thunderbolt.rst

@@ -230,7 +230,7 @@ If supported by your machine this will be exposed by the WMI bus with
 a sysfs attribute called "force_power".
 
 For example the intel-wmi-thunderbolt driver exposes this attribute in:
-  /sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
+  /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power
 
   To force the power to on, write 1 to this attribute file.
   To disable force power, write 0 to this attribute file.

Documentation/arm64/silicon-errata.txt

@@ -75,3 +75,4 @@ stable kernels.
 | Qualcomm Tech. | Falkor v1       | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 | Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
+| Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |

Documentation/cgroup-v2.txt

@@ -898,6 +898,13 @@ controller implements weight and absolute bandwidth limit models for
 normal scheduling policy and absolute bandwidth allocation model for
 realtime scheduling policy.
 
+WARNING: cgroup2 doesn't yet support control of realtime processes and
+the cpu controller can only be enabled when all RT processes are in
+the root cgroup.  Be aware that system management software may already
+have placed RT processes into nonroot cgroups during the system boot
+process, and these processes may need to be moved to the root cgroup
+before the cpu controller can be enabled.
+
 
 CPU Interface Files
 ~~~~~~~~~~~~~~~~~~~

Documentation/core-api/genericirq.rst

@@ -225,9 +225,9 @@ interrupts.
 
 The following control flow is implemented (simplified excerpt)::
 
-    :c:func:`desc->irq_data.chip->irq_mask_ack`;
+    desc->irq_data.chip->irq_mask_ack();
     handle_irq_event(desc->action);
-    :c:func:`desc->irq_data.chip->irq_unmask`;
+    desc->irq_data.chip->irq_unmask();
 
 
 Default Fast EOI IRQ flow handler
@@ -239,7 +239,7 @@ which only need an EOI at the end of the handler.
 The following control flow is implemented (simplified excerpt)::
 
     handle_irq_event(desc->action);
-    :c:func:`desc->irq_data.chip->irq_eoi`;
+    desc->irq_data.chip->irq_eoi();
 
 
 Default Edge IRQ flow handler
@@ -251,15 +251,15 @@ interrupts.
 The following control flow is implemented (simplified excerpt)::
 
     if (desc->status & running) {
-        :c:func:`desc->irq_data.chip->irq_mask_ack`;
+        desc->irq_data.chip->irq_mask_ack();
         desc->status |= pending | masked;
         return;
     }
-    :c:func:`desc->irq_data.chip->irq_ack`;
+    desc->irq_data.chip->irq_ack();
     desc->status |= running;
     do {
         if (desc->status & masked)
-            :c:func:`desc->irq_data.chip->irq_unmask`;
+            desc->irq_data.chip->irq_unmask();
         desc->status &= ~pending;
         handle_irq_event(desc->action);
     } while (status & pending);
@@ -293,10 +293,10 @@ simplified version without locking.
 The following control flow is implemented (simplified excerpt)::
 
     if (desc->irq_data.chip->irq_ack)
-        :c:func:`desc->irq_data.chip->irq_ack`;
+        desc->irq_data.chip->irq_ack();
     handle_irq_event(desc->action);
     if (desc->irq_data.chip->irq_eoi)
-            :c:func:`desc->irq_data.chip->irq_eoi`;
+        desc->irq_data.chip->irq_eoi();
 
 
 EOI Edge IRQ flow handler

Documentation/devicetree/bindings/arm/ccn.txt

@@ -15,7 +15,7 @@ Required properties:
 
 Example:
 
-	ccn@0x2000000000 {
+	ccn@2000000000 {
 		compatible = "arm,ccn-504";
 		reg = <0x20 0x00000000 0 0x1000000>;
 		interrupts = <0 181 4>;

Documentation/devicetree/bindings/arm/omap/crossbar.txt

@@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
 
 Example:
-	device_x@0x4a023000 {
+	device_x@4a023000 {
 		/* Crossbar 8 used */
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt

@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	memory-controller@0x7000f000 {
+	memory-controller@7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

Documentation/devicetree/bindings/clock/axi-clkgen.txt

@@ -17,7 +17,7 @@ Optional properties:
 - clock-output-names : From common clock binding.
 
 Example:
-	clock@0xff000000 {
+	clock@ff000000 {
 		compatible = "adi,axi-clkgen";
 		#clock-cells = <0>;
 		reg = <0xff000000 0x1000>;

Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt

@@ -23,7 +23,7 @@ Example:
 		clocks = <&clk_osc>;
 	};
 
-	aux: aux@0x7e215004 {
+	aux: aux@7e215004 {
 		compatible = "brcm,bcm2835-aux";
 		#clock-cells = <1>;
 		reg = <0x7e215000 0x8>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -24,7 +24,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4210-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -22,7 +22,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5410-clock.txt

@@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below.
 		#clock-cells = <0>;
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5410-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -23,7 +23,7 @@ tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5420-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -21,7 +21,7 @@ tree sources.
 
 Example: An example of a clock controller node is listed below.
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x10000>;
 		#clock-cells = <1>;

Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt

@@ -14,7 +14,7 @@ Required properties:
 
 Example:
 
-pllctrl: pll-controller@0x02310000 {
+pllctrl: pll-controller@02310000 {
 	compatible = "ti,keystone-pllctrl", "syscon";
 	reg = <0x02310000 0x200>;
 };

Documentation/devicetree/bindings/clock/zx296702-clk.txt

@@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
 for the full list of zx296702 clock IDs.
 
 
-topclk: topcrm@0x09800000 {
+topclk: topcrm@09800000 {
         compatible = "zte,zx296702-topcrm-clk";
         reg = <0x09800000 0x1000>;
         #clock-cells = <1>;
 };
 
-uart0: serial@0x09405000 {
+uart0: serial@09405000 {
         compatible = "zte,zx296702-uart";
         reg = <0x09405000 0x1000>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/crypto/fsl-sec4.txt

@@ -456,7 +456,7 @@ System ON/OFF key driver
       Definition: this is phandle to the register map node.
 
 EXAMPLE:
-	snvs-pwrkey@0x020cc000 {
+	snvs-pwrkey@020cc000 {
 		compatible = "fsl,sec-v4.0-pwrkey";
 		regmap = <&snvs>;
 		interrupts = <0 4 0x4>
@@ -545,7 +545,7 @@ FULL EXAMPLE
 			interrupts = <93 2>;
 		};
 
-		snvs-pwrkey@0x020cc000 {
+		snvs-pwrkey@020cc000 {
 			compatible = "fsl,sec-v4.0-pwrkey";
 			regmap = <&sec_mon>;
 			interrupts = <0 4 0x4>;

Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt

@@ -9,7 +9,7 @@ Required properties:
 - clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
 
 Example:
-	dfi: dfi@0xff630000 {
+	dfi: dfi@ff630000 {
 		compatible = "rockchip,rk3399-dfi";
 		reg = <0x00 0xff630000 0x00 0x4000>;
 		rockchip,pmu = <&pmugrf>;

Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt

@@ -48,6 +48,10 @@ Required properties:
   Documentation/devicetree/bindings/reset/reset.txt,
   the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
 
+Optional properties:
+- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
+  logic, as described in the file ../regulator/regulator.txt
+
 Required nodes:
 
 The connections to the HDMI ports are modeled using the OF graph

Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt

@@ -64,6 +64,10 @@ Required properties:
 - reg-names: should contain the names of the previous memory regions
 - interrupts: should contain the VENC Vsync interrupt number
 
+Optional properties:
+- power-domains: Optional phandle to associated power domain as described in
+	the file ../power/power_domain.txt
+
 Required nodes:
 
 The connections to the VPU output video ports are modeled using the OF graph

Documentation/devicetree/bindings/display/atmel,lcdc.txt

@@ -27,7 +27,7 @@ Optional properties:
 
 Example:
 
-	fb0: fb@0x00500000 {
+	fb0: fb@00500000 {
 		compatible = "atmel,at91sam9g45-lcdc";
 		reg = <0x00500000 0x1000>;
 		interrupts = <23 3 0>;
@@ -41,7 +41,7 @@ Example:
 
 Example for fixed framebuffer memory:
 
-	fb0: fb@0x00500000 {
+	fb0: fb@00500000 {
 		compatible = "atmel,at91sam9263-lcdc";
 		reg = <0x00700000 0x1000 0x70000000 0x200000>;
 		[...]

Documentation/devicetree/bindings/display/ilitek,ili9225.txt

@@ -4,7 +4,7 @@ This binding is for display panels using an Ilitek ILI9225 controller in SPI
 mode.
 
 Required properties:
-- compatible:	"ilitek,ili9225-2.2in-176x220"
+- compatible:	"vot,v220hf01a-t", "ilitek,ili9225"
 - rs-gpios:	Register select signal
 - reset-gpios:	Reset pin
 
@@ -16,7 +16,7 @@ Optional properties:
 
 Example:
 	display@0{
-		compatible = "ilitek,ili9225-2.2in-176x220";
+		compatible = "vot,v220hf01a-t", "ilitek,ili9225";
 		reg = <0>;
 		spi-max-frequency = <12000000>;
 		rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;

Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt

+Ilitek ILI9322 TFT panel driver with SPI control bus
+
+This is a driver for 320x240 TFT panels, accepting a variety of input
+streams that get adapted and scaled to the panel. The panel output has
+960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+VCOMH outputs.
+
+Required properties:
+  - compatible: "dlink,dir-685-panel", "ilitek,ili9322"
+    (full system-specific compatible is always required to look up configuration)
+  - reg: address of the panel on the SPI bus
+
+Optional properties:
+  - vcc-supply: core voltage supply, see regulator/regulator.txt
+  - iovcc-supply: voltage supply for the interface input/output signals,
+    see regulator/regulator.txt
+  - vci-supply: voltage supply for analog parts, see regulator/regulator.txt
+  - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt
+
+  The following optional properties only apply to RGB and YUV input modes and
+  can be omitted for BT.656 input modes:
+
+  - pixelclk-active: see display/panel/display-timing.txt
+  - de-active: see display/panel/display-timing.txt
+  - hsync-active: see display/panel/display-timing.txt
+  - vsync-active: see display/panel/display-timing.txt
+
+The panel must obey the rules for a SPI slave device as specified in
+spi/spi-bus.txt
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+
+panel: display@0 {
+	compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+	reg = <0>;
+	vcc-supply = <&vdisp>;
+	iovcc-supply = <&vdisp>;
+	vci-supply = <&vdisp>;
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&display_out>;
+		};
+	};
+};

Documentation/devicetree/bindings/display/panel/panel-common.txt

@@ -78,6 +78,16 @@ used for panels that implement compatible control signals.
   while active. Active high reset signals can be supported by inverting the
   GPIO specifier polarity flag.
 
+Power
+-----
+
+- power-supply: display panels require power to be supplied. While several
+  panels need more than one power supply with panel-specific constraints
+  governing the order and timings of the power supplies, in many cases a single
+  power supply is sufficient, either because the panel has a single power rail,
+  or because all its power rails can be driven by the same supply. In that case
+  the power-supply property specifies the supply powering the panel as a phandle
+  to a regulator.
 
 Backlight
 ---------

Documentation/devicetree/bindings/display/panel/panel-lvds.txt

@@ -32,6 +32,7 @@ Optional properties:
 - label: See panel-common.txt.
 - gpios: See panel-common.txt.
 - backlight: See panel-common.txt.
+- power-supply: See panel-common.txt.
 - data-mirror: If set, reverse the bit order described in the data mappings
   below on all data lanes, transmitting bits for slots 6 to 0 instead of
   0 to 6.

Documentation/devicetree/bindings/display/panel/simple-panel.txt

 Simple display panel
 
 Required properties:
-- power-supply: regulator to provide the supply voltage
+- power-supply: See panel-common.txt
 
 Optional properties:
 - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing

Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt → Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt

@@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel
 ========================
 
 Required properties:
-- compatible: "toppoly,td028ttec1"
+- compatible: "tpo,td028ttec1"
 
 Optional properties:
 - label: a symbolic name for the panel
@@ -14,7 +14,7 @@ Example
 -------
 
 lcd-panel: td028ttec1@0 {
-	compatible = "toppoly,td028ttec1";
+	compatible = "tpo,td028ttec1";
 	reg = <0>;
 	spi-max-frequency = <100000>;
 	spi-cpol;

Documentation/devicetree/bindings/display/sitronix,st7735r.txt

+Sitronix ST7735R display panels
+
+This binding is for display panels using a Sitronix ST7735R controller in SPI
+mode.
+
+Required properties:
+- compatible:	"jianda,jd-t18003-t01", "sitronix,st7735r"
+- dc-gpios:	Display data/command selection (D/CX)
+- reset-gpios:	Reset signal (RSTX)
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight:	phandle of the backlight device attached to the panel
+
+Example:
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+	}
+
+	...
+
+	display@0{
+		compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+		rotation = <270>;
+		backlight = &backlight;
+	};

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

@@ -93,6 +93,7 @@ Required properties:
    * allwinner,sun6i-a31s-tcon
    * allwinner,sun7i-a20-tcon
    * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-a83t-tcon-lcd
    * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
@@ -121,6 +122,14 @@ Required properties:
 On SoCs other than the A33 and V3s, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
+On SoCs that support LVDS (all SoCs but the A13, H3, H5 and V3s), you
+need one more reset line:
+   - 'lvds': The reset line driving the LVDS logic
+
+And on the A23, A31, A31s and A33, you need one more clock line:
+   - 'lvds-alt': An alternative clock source, separate from the TCON channel 0
+                 clock, that can be used to drive the LVDS clock
+
 DRC
 ---
 
@@ -216,6 +225,7 @@ supported.
 
 Required properties:
   - compatible: value must be one of:
+    * allwinner,sun8i-a83t-de2-mixer-0
     * allwinner,sun8i-v3s-de2-mixer
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
@@ -245,6 +255,7 @@ Required properties:
     * allwinner,sun6i-a31s-display-engine
     * allwinner,sun7i-a20-display-engine
     * allwinner,sun8i-a33-display-engine
+    * allwinner,sun8i-a83t-display-engine
     * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine

Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt

@@ -206,21 +206,33 @@ of the following host1x client modules:
     - "nvidia,tegra132-sor": for Tegra132
     - "nvidia,tegra210-sor": for Tegra210
     - "nvidia,tegra210-sor1": for Tegra210
+    - "nvidia,tegra186-sor": for Tegra186
+    - "nvidia,tegra186-sor1": for Tegra186
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
     See ../clocks/clock-bindings.txt for details.
   - clock-names: Must include the following entries:
     - sor: clock input for the SOR hardware
-    - source: source clock for the SOR clock
+    - out: SOR output clock
     - parent: input for the pixel clock
     - dp: reference clock for the SOR clock
     - safe: safe reference for the SOR clock during power up
+
+    For Tegra186 and later:
+    - pad: SOR pad output clock (on Tegra186 and later)
+
+    Obsolete:
+    - source: source clock for the SOR clock (obsolete, use "out" instead)
+
   - resets: Must contain an entry for each entry in reset-names.
     See ../reset/reset.txt for details.
   - reset-names: Must include the following entries:
     - sor
 
+  Required properties on Tegra186 and later:
+  - nvidia,interface: index of the SOR interface
+
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection

Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt

@@ -47,6 +47,11 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
+
 HDMI
 ----
 

Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt

@@ -28,6 +28,10 @@ Required properties:
 - ti,hwmods: "dss_dispc"
 - interrupts: the DISPC interrupt
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt

@@ -37,6 +37,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt

@@ -36,6 +36,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt

@@ -36,6 +36,10 @@ Required properties:
 - clocks: handle to fclk
 - clock-names: "fck"
 
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+			in bytes per second
+
 
 RFBI
 ----

Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt

@@ -73,7 +73,7 @@ Hypervisor OS configuration:
 		max-read-transactions = <31>;
 		channel-reset-timeout-cycles = <0x500>;
 
-		hidma_24: dma-controller@0x5c050000 {
+		hidma_24: dma-controller@5c050000 {
 			compatible = "qcom,hidma-1.0";
 			reg = <0 0x5c050000 0x0 0x1000>,
 			      <0 0x5c0b0000 0x0 0x1000>;
@@ -85,7 +85,7 @@ Hypervisor OS configuration:
 
 Guest OS configuration:
 
-	hidma_24: dma-controller@0x5c050000 {
+	hidma_24: dma-controller@5c050000 {
 		compatible = "qcom,hidma-1.0";
 		reg = <0 0x5c050000 0x0 0x1000>,
 		      <0 0x5c0b0000 0x0 0x1000>;

Documentation/devicetree/bindings/dma/zxdma.txt

@@ -13,7 +13,7 @@ Required properties:
 Example:
 
 Controller:
-	dma: dma-controller@0x09c00000{
+	dma: dma-controller@09c00000{
 		compatible = "zte,zx296702-dma";
 		reg = <0x09c00000 0x1000>;
 		clocks = <&topclk ZX296702_DMA_ACLK>;

Documentation/devicetree/bindings/eeprom/at25.txt

 EEPROMs (SPI) compatible with Atmel at25.
 
 Required properties:
-- compatible : "atmel,at25".
+- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
+  Example "<vendor>,<type>" values:
+    "microchip,25lc040"
+    "st,m95m02"
+    "st,m95256"
+
 - reg : chip select number
 - spi-max-frequency : max spi frequency to use
 - pagesize : size of the eeprom page
@@ -13,7 +18,7 @@ Optional properties:
 - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
 - read-only : this parameter-less property disables writes to the eeprom
 
-Obsolete legacy properties are can be used in place of "size", "pagesize",
+Obsolete legacy properties can be used in place of "size", "pagesize",
 "address-width", and "read-only":
 - at25,byte-len : total eeprom size in bytes
 - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
@@ -22,8 +27,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize",
 Additional compatible properties are also allowed.
 
 Example:
-	at25@0 {
-		compatible = "atmel,at25", "st,m95256";
+	eeprom@0 {
+		compatible = "st,m95256", "atmel,at25";
 		reg = <0>
 		spi-max-frequency = <5000000>;
 		spi-cpha;

Documentation/devicetree/bindings/gpio/gpio-altera.txt

@@ -30,7 +30,7 @@ Optional properties:
 
 Example:
 
-gpio_altr: gpio@0xff200000 {
+gpio_altr: gpio@ff200000 {
 	compatible = "altr,pio-1.0";
 	reg = <0xff200000 0x10>;
 	interrupts = <0 45 4>;

Documentation/devicetree/bindings/gpio/gpio-pca953x.txt

@@ -27,7 +27,7 @@ Required properties:
 	ti,tca6424
 	ti,tca9539
 	ti,tca9554
-	onsemi,pca9654
+	onnn,pca9654
 	exar,xra1202
 
 Optional properties:

Documentation/devicetree/bindings/i2c/i2c-jz4780.txt

@@ -18,7 +18,7 @@ Optional properties:
 Example
 
 / {
-	i2c4: i2c4@0x10054000 {
+	i2c4: i2c4@10054000 {
 		compatible = "ingenic,jz4780-i2c";
 		reg = <0x10054000 0x1000>;
 

Documentation/devicetree/bindings/iio/pressure/hp03.txt

@@ -10,7 +10,7 @@ Required properties:
 
 Example:
 
-hp03@0x77 {
+hp03@77 {
 	compatible = "hoperf,hp03";
 	reg = <0x77>;
 	xclr-gpio = <&portc 0 0x0>;

Documentation/devicetree/bindings/input/touchscreen/bu21013.txt

@@ -15,7 +15,7 @@ Optional properties:
 Example:
 
 	i2c@80110000 {
-		bu21013_tp@0x5c {
+		bu21013_tp@5c {
 			compatible = "rohm,bu21013_tp";
 			reg = <0x5c>;
 			touch-gpio = <&gpio2 20 0x4>;

Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt

@@ -155,7 +155,7 @@ Example:
 		      <0x0 0xe112f000 0 0x02000>,
 		      <0x0 0xe1140000 0 0x10000>,
 		      <0x0 0xe1160000 0 0x10000>;
-		v2m0: v2m@0x8000 {
+		v2m0: v2m@8000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x80000 0 0x1000>;
@@ -163,7 +163,7 @@ Example:
 
 		....
 
-		v2mN: v2m@0x9000 {
+		v2mN: v2m@9000 {
 			compatible = "arm,gic-v2m-frame";
 			msi-controller;
 			reg = <0x0 0x90000 0 0x1000>;

Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt

@@ -71,7 +71,7 @@ Example 2:
 	 * An interrupt generating device that is wired to a Meta external
 	 * trigger block.
 	 */
-	uart1: uart@0x02004c00 {
+	uart1: uart@02004c00 {
 		// Interrupt source '5' that is level-sensitive.
 		// Note that there are only two cells as specified in the
 		// interrupt parent's '#interrupt-cells' property.

Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt

@@ -51,7 +51,7 @@ Example 1:
 	/*
 	 * TZ1090 PDC block
 	 */
-	pdc: pdc@0x02006000 {
+	pdc: pdc@02006000 {
 		// This is an interrupt controller node.
 		interrupt-controller;
 

Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt

@@ -39,7 +39,7 @@ Example:
 
 The following is an example from the SPEAr320 SoC dtsi file.
 
-shirq: interrupt-controller@0xb3000000 {
+shirq: interrupt-controller@b3000000 {
 	compatible = "st,spear320-shirq";
 	reg = <0xb3000000 0x1000>;
 	interrupts = <28 29 30 1>;

Documentation/devicetree/bindings/mailbox/altera-mailbox.txt

@@ -14,7 +14,7 @@ Optional properties:
 			depends on the interrupt controller parent.
 
 Example:
-	mbox_tx: mailbox@0x100 {
+	mbox_tx: mailbox@100 {
 		compatible = "altr,mailbox-1.0";
 		reg = <0x100 0x8>;
 		interrupt-parent = < &gic_0 >;
@@ -22,7 +22,7 @@ Example:
 		#mbox-cells = <1>;
 	};
 
-	mbox_rx: mailbox@0x200 {
+	mbox_rx: mailbox@200 {
 		compatible = "altr,mailbox-1.0";
 		reg = <0x200 0x8>;
 		interrupt-parent = < &gic_0 >;
@@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be
 used to give a name to the communication channel to be used by the client user.
 
 Example:
-	mclient0: mclient0@0x400 {
+	mclient0: mclient0@400 {
 		compatible = "client-1.0";
 		reg = <0x400 0x10>;
 		mbox-names = "mbox-tx", "mbox-rx";

Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt

@@ -15,7 +15,7 @@ Optional properties:
 - brcm,use-bcm-hdr:  present if a BCM header precedes each frame.
 
 Example:
-	pdc0: iproc-pdc0@0x612c0000 {
+	pdc0: iproc-pdc0@612c0000 {
 		compatible = "brcm,iproc-pdc-mbox";
 		reg = <0 0x612c0000 0 0x445>;  /* PDC FS0 regs */
 		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/media/exynos5-gsc.txt

@@ -17,7 +17,7 @@ Optional properties:
 
 Example:
 
-gsc_0:  gsc@0x13e00000 {
+gsc_0:  gsc@13e00000 {
 	compatible = "samsung,exynos5250-gsc";
 	reg = <0x13e00000 0x1000>;
 	interrupts = <0 85 0>;

Documentation/devicetree/bindings/media/mediatek-vcodec.txt

@@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 {
                   "vdec_bus_clk_src";
   };
 
-  vcodec_enc: vcodec@0x18002000 {
+  vcodec_enc: vcodec@18002000 {
     compatible = "mediatek,mt8173-vcodec-enc";
     reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
           <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/

Documentation/devicetree/bindings/media/rcar_vin.txt

@@ -44,7 +44,7 @@ Device node example
 	       vin0 = &vin0;
 	};
 
-        vin0: vin@0xe6ef0000 {
+        vin0: vin@e6ef0000 {
                 compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
                 clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
                 reg = <0 0xe6ef0000 0 0x1000>;

Documentation/devicetree/bindings/media/samsung-fimc.txt

@@ -138,7 +138,7 @@ Example:
 		};
 
 		/* MIPI CSI-2 bus IF sensor */
-		s5c73m3: sensor@0x1a {
+		s5c73m3: sensor@1a {
 			compatible = "samsung,s5c73m3";
 			reg = <0x1a>;
 			vddio-supply = <...>;

Documentation/devicetree/bindings/media/sh_mobile_ceu.txt

@@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver:
 
 Example:
 
-ceu0: ceu@0xfe910000 {
+ceu0: ceu@fe910000 {
 	compatible = "renesas,sh-mobile-ceu";
 	reg = <0xfe910000 0xa0>;
 	interrupt-parent = <&intcs>;

Documentation/devicetree/bindings/media/video-interfaces.txt

@@ -154,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
 'port' node which may indicate that at any time only one of the following data
 pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 
-	ceu0: ceu@0xfe910000 {
+	ceu0: ceu@fe910000 {
 		compatible = "renesas,sh-mobile-ceu";
 		reg = <0xfe910000 0xa0>;
 		interrupts = <0x880>;
@@ -193,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 		};
 	};
 
-	i2c0: i2c@0xfff20000 {
+	i2c0: i2c@fff20000 {
 		...
-		ov772x_1: camera@0x21 {
+		ov772x_1: camera@21 {
 			compatible = "ovti,ov772x";
 			reg = <0x21>;
 			vddio-supply = <&regulator1>;
@@ -219,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 			};
 		};
 
-		imx074: camera@0x1a {
+		imx074: camera@1a {
 			compatible = "sony,imx074";
 			reg = <0x1a>;
 			vddio-supply = <&regulator1>;
@@ -239,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 		};
 	};
 
-	csi2: csi2@0xffc90000 {
+	csi2: csi2@ffc90000 {
 		compatible = "renesas,sh-mobile-csi2";
 		reg = <0xffc90000 0x1000>;
 		interrupts = <0x17a0>;

Documentation/devicetree/bindings/memory-controllers/ti/emif.txt

@@ -46,7 +46,7 @@ Optional properties:
 
 Example:
 
-emif1: emif@0x4c000000 {
+emif1: emif@4c000000 {
 	compatible	= "ti,emif-4d";
 	ti,hwmods	= "emif2";
 	phy-type	= <1>;

Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt

@@ -13,7 +13,7 @@ Required properties:
 
 Example:
 
-devctrl: device-state-control@0x02620000 {
+devctrl: device-state-control@02620000 {
 	compatible = "ti,keystone-devctrl", "syscon";
 	reg = <0x02620000 0x1000>;
 };

Documentation/devicetree/bindings/misc/brcm,kona-smc.txt

@@ -9,7 +9,7 @@ Required properties:
 - reg : Location and size of bounce buffer
 
 Example:
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; //1 KiB in SRAM
 	};

Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt

@@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
-sdio2: sdio@0x3f1a0000 {
+sdio2: sdio@3f1a0000 {
 	compatible = "brcm,kona-sdhci";
 	reg = <0x3f1a0000 0x10000>;
 	clocks = <&sdio3_clk>;

Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt

@@ -24,7 +24,7 @@ Optional properties:
 
 Example:
 
-sdhci0: sdhci@0x18041000 {
+sdhci0: sdhci@18041000 {
 	compatible = "brcm,sdhci-iproc-cygnus";
 	reg = <0x18041000 0x100>;
 	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

@@ -55,7 +55,7 @@ Examples:
 
 [hwmod populated DMA resources]
 
-	mmc1: mmc@0x4809c000 {
+	mmc1: mmc@4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";
@@ -67,7 +67,7 @@ Examples:
 
 [generic DMA request binding]
 
-	mmc1: mmc@0x4809c000 {
+	mmc1: mmc@4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
 		ti,hwmods = "mmc1";

Documentation/devicetree/bindings/mtd/gpmc-nor.txt

@@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 {
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};

Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

@@ -13,7 +13,6 @@ Required properties:
                  at25df321a
                  at25df641
                  at26df081a
-                 en25s64
                  mr25h128
                  mr25h256
                  mr25h10
@@ -33,7 +32,6 @@ Required properties:
                  s25fl008k
                  s25fl064k
                  sst25vf040b
-                 sst25wf040b
                  m25p40
                  m25p80
                  m25p16

Documentation/devicetree/bindings/mtd/mtk-nand.txt

@@ -131,7 +131,7 @@ Example:
 				read-only;
 				reg = <0x00000000 0x00400000>;
 			};
-			android@0x00400000 {
+			android@00400000 {
 				label = "android";
 				reg = <0x00400000 0x12c00000>;
 			};

Documentation/devicetree/bindings/net/altera_tse.txt

@@ -52,7 +52,7 @@ Optional properties:
 
 Example:
 
-	tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
+	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
 		compatible = "altr,tse-msgdma-1.0";
 		reg =	<0x00000001 0x00000000 0x00000400>,
 			<0x00000001 0x00000460 0x00000020>,
@@ -90,7 +90,7 @@ Example:
 		};
 	};
 
-	tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
+	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
 		compatible = "altr,tse-msgdma-1.0";
 		reg = 	<0x00000001 0x00001000 0x00000400>,
 			<0x00000001 0x00001460 0x00000020>,

Documentation/devicetree/bindings/net/mdio.txt

@@ -18,7 +18,7 @@ Example :
 This example shows these optional properties, plus other properties
 required for the TI Davinci MDIO driver.
 
-	davinci_mdio: ethernet@0x5c030000 {
+	davinci_mdio: ethernet@5c030000 {
 		compatible = "ti,davinci_mdio";
 		reg = <0x5c030000 0x1000>;
 		#address-cells = <1>;

Documentation/devicetree/bindings/net/socfpga-dwmac.txt

@@ -28,7 +28,7 @@ Required properties:
 
 Example:
 
-gmii_to_sgmii_converter: phy@0x100000240 {
+gmii_to_sgmii_converter: phy@100000240 {
 	compatible = "altr,gmii-to-sgmii-2.0";
 	reg = <0x00000001 0x00000240 0x00000008>,
 		<0x00000001 0x00000200 0x00000040>;

Documentation/devicetree/bindings/nios2/nios2.txt

@@ -36,7 +36,7 @@ Optional properties:
 
 Example:
 
-cpu@0x0 {
+cpu@0 {
 	device_type = "cpu";
 	compatible = "altr,nios2-1.0";
 	reg = <0>;

Documentation/devicetree/bindings/pci/altera-pcie.txt

@@ -25,7 +25,7 @@ Optional properties:
 - bus-range:	PCI bus numbers covered
 
 Example
-	pcie_0: pcie@0xc00000000 {
+	pcie_0: pcie@c00000000 {
 		compatible = "altr,pcie-root-port-1.0";
 		reg = <0xc0000000 0x20000000>,
 			<0xff220000 0x00004000>;

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -52,7 +52,7 @@ Additional required properties for imx7d-pcie:
 
 Example:
 
-	pcie@0x01000000 {
+	pcie@01000000 {
 		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
 		reg = <0x01ffc000 0x04000>,
 		      <0x01f00000 0x80000>;

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -21,7 +21,7 @@ Optional properties:
 - dma-coherent: Present if DMA operations are coherent.
 
 Hip05 Example (note that Hip06 is the same except compatible):
-	pcie@0xb0080000 {
+	pcie@b0080000 {
 		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
 		reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
 		reg-names = "rc_dbi", "config";

Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt

@@ -45,7 +45,7 @@ Optional properties:
 - usb3_vbus-supply : regulator phandle for controller usb3 vbus
 
 Example:
-	usbphy: phy@0x01c13400 {
+	usbphy: phy@01c13400 {
 		#phy-cells = <1>;
 		compatible = "allwinner,sun4i-a10-usb-phy";
 		/* phy base regs, phy1 pmu reg, phy2 pmu reg */

Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt

@@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 For example:
 
-	pinmux: pinmux@0x0301d0c8 {
+	pinmux: pinmux@0301d0c8 {
 		compatible = "brcm,cygnus-pinmux";
 		reg = <0x0301d0c8 0x1b0>;
 

Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt

@@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following:
 
 For a specific board, if it wants to use sd1,
 it can add the following to its board-specific .dts file.
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_pmx0>;
 }
 
 or
 
-sd1: sd@0x12340000 {
+sd1: sd@12340000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_pmx1>;
 }

Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt

@@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following:
 
 For a specific board, if it wants to use uart2 without hardware flow control,
 it can add the following to its board-specific .dts file.
-uart2: uart@0xb0070000 {
+uart2: uart@b0070000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_noflow_pins_a>;
 }

Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt

@@ -136,7 +136,7 @@ Example for rk3188:
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@0x2000a000 {
+		gpio0: gpio0@2000a000 {
 			compatible = "rockchip,rk3188-gpio-bank0";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -149,7 +149,7 @@ Example for rk3188:
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@0x2003c000 {
+		gpio1: gpio1@2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/regulator/regulator.txt

@@ -107,7 +107,7 @@ regulators (twl_reg1 and twl_reg2),
 		...
 	};
 
-	mmc: mmc@0x0 {
+	mmc: mmc@0 {
 		...
 		...
 		vmmc-supply = <&twl_reg1>;

Documentation/devicetree/bindings/serial/efm32-uart.txt

@@ -12,7 +12,7 @@ Optional properties:
 
 Example:
 
-uart@0x4000c400 {
+uart@4000c400 {
 	compatible = "energymicro,efm32-uart";
 	reg = <0x4000c400 0x400>;
 	interrupts = <15>;

Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt

@@ -14,7 +14,7 @@ Required properties:
 
 
 Example:
-	ps20: ps2@0x01c2a000 {
+	ps20: ps2@01c2a000 {
 		compatible = "allwinner,sun4i-a10-ps2";
 		reg = <0x01c2a000 0x400>;
 		interrupts = <0 62 4>;

Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt

@@ -220,7 +220,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000>,
 			      <0x2a0f000 0x100>,
 			      <0x2a0c000 0x3c8>,

Documentation/devicetree/bindings/sound/adi,axi-i2s.txt

@@ -21,7 +21,7 @@ please check:
 
 Example:
 
-	i2s: i2s@0x77600000 {
+	i2s: i2s@77600000 {
 		compatible = "adi,axi-i2s-1.00.a";
 		reg = <0x77600000 0x1000>;
 		clocks = <&clk 15>, <&audio_clock>;

Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt

@@ -20,7 +20,7 @@ please check:
 
 Example:
 
-	spdif: spdif@0x77400000 {
+	spdif: spdif@77400000 {
 		compatible = "adi,axi-spdif-tx-1.00.a";
 		reg = <0x77600000 0x1000>;
 		clocks = <&clk 15>, <&audio_clock>;

Documentation/devicetree/bindings/sound/ak4613.txt

@@ -20,7 +20,7 @@ Optional properties:
 Example:
 
 &i2c {
-	ak4613: ak4613@0x10 {
+	ak4613: ak4613@10 {
 		compatible = "asahi-kasei,ak4613";
 		reg = <0x10>;
 	};

Documentation/devicetree/bindings/sound/ak4642.txt

@@ -17,7 +17,7 @@ Optional properties:
 Example 1:
 
 &i2c {
-	ak4648: ak4648@0x12 {
+	ak4648: ak4648@12 {
 		compatible = "asahi-kasei,ak4642";
 		reg = <0x12>;
 	};

Documentation/devicetree/bindings/sound/da7218.txt

@@ -73,7 +73,7 @@ Example:
 		compatible = "dlg,da7218";
 		reg = <0x1a>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		wakeup-source;
 
 		VDD-supply = <&reg_audio>;

Documentation/devicetree/bindings/sound/da7219.txt

@@ -77,7 +77,7 @@ Example:
 		reg = <0x1a>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 
 		VDD-supply = <&reg_audio>;
 		VDDMIC-supply = <&reg_audio>;

Documentation/devicetree/bindings/sound/max98371.txt

@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 &i2c {
-	max98371: max98371@0x31 {
+	max98371: max98371@31 {
 		compatible = "maxim,max98371";
 		reg = <0x31>;
 	};

Documentation/devicetree/bindings/sound/max9867.txt

@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 &i2c {
-	max9867: max9867@0x18 {
+	max9867: max9867@18 {
 		compatible = "maxim,max9867";
 		reg = <0x18>;
 	};

Documentation/devicetree/bindings/sound/renesas,fsi.txt

@@ -20,7 +20,7 @@ Required properties:
 
 Example:
 
-sh_fsi2: sh_fsi2@0xec230000 {
+sh_fsi2: sh_fsi2@ec230000 {
 	compatible = "renesas,sh_fsi2";
 	reg = <0xec230000 0x400>;
 	interrupts = <0 146 0x4>;

Documentation/devicetree/bindings/sound/rockchip-spdif.txt

@@ -33,7 +33,7 @@ Required properties on RK3288:
 
 Example for the rk3188 SPDIF controller:
 
-spdif: spdif@0x1011e000 {
+spdif: spdif@1011e000 {
 	compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
 	reg = <0x1011e000 0x2000>;
 	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;

Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt

@@ -51,7 +51,7 @@ Optional properties:
 
 Example:
 
-	sti_uni_player1: sti-uni-player@0x8D81000 {
+	sti_uni_player1: sti-uni-player@8D81000 {
 		compatible = "st,stih407-uni-player-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -63,7 +63,7 @@ Example:
 		st,tdm-mode = <1>;
 	};
 
-	sti_uni_player2: sti-uni-player@0x8D82000 {
+	sti_uni_player2: sti-uni-player@8D82000 {
 		compatible = "st,stih407-uni-player-pcm-out";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -74,7 +74,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_player3: sti-uni-player@0x8D85000 {
+	sti_uni_player3: sti-uni-player@8D85000 {
 		compatible = "st,stih407-uni-player-spdif";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;
@@ -85,7 +85,7 @@ Example:
 		dma-names = "tx";
 	};
 
-	sti_uni_reader1: sti-uni-reader@0x8D84000 {
+	sti_uni_reader1: sti-uni-reader@8D84000 {
 		compatible = "st,stih407-uni-reader-hdmi";
 		#sound-dai-cells = <0>;
 		st,syscfg = <&syscfg_core>;

Documentation/devicetree/bindings/spi/efm32-spi.txt

@@ -19,7 +19,7 @@ Recommended properties :
 
 Example:
 
-spi1: spi@0x4000c400 { /* USART1 */
+spi1: spi@4000c400 { /* USART1 */
 	#address-cells = <1>;
 	#size-cells = <0>;
 	compatible = "energymicro,efm32-spi";

Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt

@@ -12,24 +12,30 @@ Required properties:
   - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain CSPI/eCSPI interrupt
-- cs-gpios : Specifies the gpio pins to be used for chipselects.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
 	Documentation/devicetree/bindings/clock/clock-bindings.txt
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-		Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
 
-Obsolete properties:
-- fsl,spi-num-chipselects : Contains the number of the chipselect
+Recommended properties:
+- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt.  While the native chip
+select lines can be used, they appear to always generate a pulse between each
+word of a transfer.  Most use cases will require GPIO based chip selects to
+generate a valid transaction.
 
 Optional properties:
+- num-cs :  Number of total chip selects, see spi-bus.txt.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names: DMA request names, if present, should include "tx" and "rx".
 - fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register
 controlling the SPI_READY handling. Note that to enable the DRCTL consideration,
 the SPI_READY mode-flag needs to be set too.
 Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst).
 
+Obsolete properties:
+- fsl,spi-num-chipselects : Contains the number of the chipselect
+
 Example:
 
 ecspi@70010000 {

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -239,7 +239,7 @@ cpus {
 	 * A simple fan controller which supports 10 speeds of operation
 	 * (represented as 0-9).
 	 */
-	fan0: fan@0x48 {
+	fan0: fan@48 {
 		...
 		cooling-min-level = <0>;
 		cooling-max-level = <9>;
@@ -252,7 +252,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -330,7 +330,7 @@ ocp {
 	/*
 	 * A simple IC with several bandgap temperature sensors.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <1>;
 	};
@@ -447,7 +447,7 @@ one thermal zone.
 	/*
 	 * A simple IC with a single temperature sensor.
 	 */
-	adc: sensor@0x49 {
+	adc: sensor@49 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -458,7 +458,7 @@ ocp {
 	/*
 	 * A simple IC with a single bandgap temperature sensor.
 	 */
-	bandgap0: bandgap@0x0000ED00 {
+	bandgap0: bandgap@0000ED00 {
 		...
 		#thermal-sensor-cells = <0>;
 	};
@@ -516,7 +516,7 @@ with many sensors and many cooling devices.
 	/*
 	 * An IC with several temperature sensor.
 	 */
-	adc_dummy: sensor@0x50 {
+	adc_dummy: sensor@50 {
 		...
 		#thermal-sensor-cells = <1>; /* sensor internal ID */
 	};

Documentation/devicetree/bindings/ufs/ufs-qcom.txt

@@ -32,7 +32,7 @@ Optional properties:
 
 Example:
 
-	ufsphy1: ufsphy@0xfc597000 {
+	ufsphy1: ufsphy@fc597000 {
 		compatible = "qcom,ufs-phy-qmp-20nm";
 		reg = <0xfc597000 0x800>;
 		reg-names = "phy_mem";
@@ -53,7 +53,7 @@ Example:
 			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
 	};
 
-	ufshc@0xfc598000 {
+	ufshc@fc598000 {
 		...
 		phys = <&ufsphy1>;
 		phy-names = "ufsphy";

Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt

@@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply
 regulators or clocks are always on.
 
 Example:
-	ufshc@0xfc598000 {
+	ufshc@fc598000 {
 		compatible = "jedec,ufs-1.1";
 		reg = <0xfc598000 0x800>;
 		interrupts = <0 28 0>;