From 72729910c38ca5b4736032c15dc3f9d48fe4f68a Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Wed, 27 Sep 2006 09:44:11 +0100 Subject: [PATCH] [ARM] 3865/1: AT91RM9200 header updates This is more preparation for adding support for the new Atmel AT91SAM9 processors. Changes include: - Replace AT91_BASE_* with AT91RM9200_BASE_* - Replace AT91_ID_* with AT91RM9200_ID_* - ROM, SRAM and UHP address definitions moved to at91rm9200.h. - The raw AT91_P[ABCD]_* definitions are now depreciated in favour of the GPIO API. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/at91rm9200.c | 32 ++--- arch/arm/mach-at91rm9200/clock.c | 28 ++--- arch/arm/mach-at91rm9200/devices.c | 72 +++++------ arch/arm/mach-at91rm9200/gpio.c | 16 +-- arch/arm/mach-at91rm9200/irq.c | 4 +- arch/arm/mach-at91rm9200/pm.c | 14 +-- drivers/mmc/at91_mci.c | 4 +- drivers/net/arm/at91_ether.c | 2 +- drivers/serial/at91_serial.c | 2 +- drivers/usb/gadget/at91_udc.c | 6 +- include/asm-arm/arch-at91rm9200/at91rm9200.h | 118 +++++++++++-------- include/asm-arm/arch-at91rm9200/gpio.h | 2 +- include/asm-arm/arch-at91rm9200/hardware.h | 37 +++--- include/asm-arm/arch-at91rm9200/irqs.h | 2 +- 14 files changed, 173 insertions(+), 166 deletions(-) diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c index 0985b1c42c7c..e21cb845d112 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91rm9200/at91rm9200.c @@ -26,78 +26,78 @@ static struct map_desc at91rm9200_io_desc[] __initdata = { .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SPI, - .pfn = __phys_to_pfn(AT91_BASE_SPI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SSC2, - .pfn = __phys_to_pfn(AT91_BASE_SSC2), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC2), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SSC1, - .pfn = __phys_to_pfn(AT91_BASE_SSC1), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC1), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_SSC0, - .pfn = __phys_to_pfn(AT91_BASE_SSC0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_SSC0), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_US3, - .pfn = __phys_to_pfn(AT91_BASE_US3), + .pfn = __phys_to_pfn(AT91RM9200_BASE_US3), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_US2, - .pfn = __phys_to_pfn(AT91_BASE_US2), + .pfn = __phys_to_pfn(AT91RM9200_BASE_US2), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_US1, - .pfn = __phys_to_pfn(AT91_BASE_US1), + .pfn = __phys_to_pfn(AT91RM9200_BASE_US1), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_US0, - .pfn = __phys_to_pfn(AT91_BASE_US0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_US0), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_EMAC, - .pfn = __phys_to_pfn(AT91_BASE_EMAC), + .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_TWI, - .pfn = __phys_to_pfn(AT91_BASE_TWI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_MCI, - .pfn = __phys_to_pfn(AT91_BASE_MCI), + .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_UDP, - .pfn = __phys_to_pfn(AT91_BASE_UDP), + .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_TCB1, - .pfn = __phys_to_pfn(AT91_BASE_TCB1), + .pfn = __phys_to_pfn(AT91RM9200_BASE_TCB1), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_VA_BASE_TCB0, - .pfn = __phys_to_pfn(AT91_BASE_TCB0), + .pfn = __phys_to_pfn(AT91RM9200_BASE_TCB0), .length = SZ_16K, .type = MT_DEVICE, }, { .virtual = AT91_SRAM_VIRT_BASE, - .pfn = __phys_to_pfn(AT91_SRAM_BASE), - .length = AT91_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), + .length = AT91RM9200_SRAM_SIZE, .type = MT_DEVICE, }, }; diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c index edc2cc837ae6..5b7892277bee 100644 --- a/arch/arm/mach-at91rm9200/clock.c +++ b/arch/arm/mach-at91rm9200/clock.c @@ -190,85 +190,85 @@ static void pmc_periph_mode(struct clk *clk, int is_on) static struct clk udc_clk = { .name = "udc_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_UDP, + .pmc_mask = 1 << AT91RM9200_ID_UDP, .mode = pmc_periph_mode, }; static struct clk ohci_clk = { .name = "ohci_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_UHP, + .pmc_mask = 1 << AT91RM9200_ID_UHP, .mode = pmc_periph_mode, }; static struct clk ether_clk = { .name = "ether_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_EMAC, + .pmc_mask = 1 << AT91RM9200_ID_EMAC, .mode = pmc_periph_mode, }; static struct clk mmc_clk = { .name = "mci_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_MCI, + .pmc_mask = 1 << AT91RM9200_ID_MCI, .mode = pmc_periph_mode, }; static struct clk twi_clk = { .name = "twi_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_TWI, + .pmc_mask = 1 << AT91RM9200_ID_TWI, .mode = pmc_periph_mode, }; static struct clk usart0_clk = { .name = "usart0_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_US0, + .pmc_mask = 1 << AT91RM9200_ID_US0, .mode = pmc_periph_mode, }; static struct clk usart1_clk = { .name = "usart1_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_US1, + .pmc_mask = 1 << AT91RM9200_ID_US1, .mode = pmc_periph_mode, }; static struct clk usart2_clk = { .name = "usart2_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_US2, + .pmc_mask = 1 << AT91RM9200_ID_US2, .mode = pmc_periph_mode, }; static struct clk usart3_clk = { .name = "usart3_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_US3, + .pmc_mask = 1 << AT91RM9200_ID_US3, .mode = pmc_periph_mode, }; static struct clk spi_clk = { .name = "spi0_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_SPI, + .pmc_mask = 1 << AT91RM9200_ID_SPI, .mode = pmc_periph_mode, }; static struct clk pioA_clk = { .name = "pioA_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOA, + .pmc_mask = 1 << AT91RM9200_ID_PIOA, .mode = pmc_periph_mode, }; static struct clk pioB_clk = { .name = "pioB_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOB, + .pmc_mask = 1 << AT91RM9200_ID_PIOB, .mode = pmc_periph_mode, }; static struct clk pioC_clk = { .name = "pioC_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOC, + .pmc_mask = 1 << AT91RM9200_ID_PIOC, .mode = pmc_periph_mode, }; static struct clk pioD_clk = { .name = "pioD_clk", .parent = &mck, - .pmc_mask = 1 << AT91_ID_PIOD, + .pmc_mask = 1 << AT91RM9200_ID_PIOD, .mode = pmc_periph_mode, }; diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 4352acb88178..db7c684cdb63 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -35,13 +35,13 @@ static struct at91_usbh_data usbh_data; static struct resource at91_usbh_resources[] = { [0] = { - .start = AT91_UHP_BASE, - .end = AT91_UHP_BASE + SZ_1M - 1, + .start = AT91RM9200_UHP_BASE, + .end = AT91RM9200_UHP_BASE + SZ_1M - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UHP, - .end = AT91_ID_UHP, + .start = AT91RM9200_ID_UHP, + .end = AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -80,13 +80,13 @@ static struct at91_udc_data udc_data; static struct resource at91_udc_resources[] = { [0] = { - .start = AT91_BASE_UDP, - .end = AT91_BASE_UDP + SZ_16K - 1, + .start = AT91RM9200_BASE_UDP, + .end = AT91RM9200_BASE_UDP + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_UDP, - .end = AT91_ID_UDP, + .start = AT91RM9200_ID_UDP, + .end = AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -131,13 +131,13 @@ static struct at91_eth_data eth_data; static struct resource at91_eth_resources[] = { [0] = { - .start = AT91_BASE_EMAC, - .end = AT91_BASE_EMAC + SZ_16K - 1, + .start = AT91RM9200_BASE_EMAC, + .end = AT91RM9200_BASE_EMAC + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_EMAC, - .end = AT91_ID_EMAC, + .start = AT91RM9200_ID_EMAC, + .end = AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -263,13 +263,13 @@ static struct at91_mmc_data mmc_data; static struct resource at91_mmc_resources[] = { [0] = { - .start = AT91_BASE_MCI, - .end = AT91_BASE_MCI + SZ_16K - 1, + .start = AT91RM9200_BASE_MCI, + .end = AT91RM9200_BASE_MCI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_MCI, - .end = AT91_ID_MCI, + .start = AT91RM9200_ID_MCI, + .end = AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -423,13 +423,13 @@ static u64 spi_dmamask = 0xffffffffUL; static struct resource at91_spi_resources[] = { [0] = { - .start = AT91_BASE_SPI, - .end = AT91_BASE_SPI + SZ_16K - 1, + .start = AT91RM9200_BASE_SPI, + .end = AT91RM9200_BASE_SPI + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SPI, - .end = AT91_ID_SPI, + .start = AT91RM9200_ID_SPI, + .end = AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -582,13 +582,13 @@ static inline void configure_dbgu_pins(void) static struct resource uart0_resources[] = { [0] = { - .start = AT91_BASE_US0, - .end = AT91_BASE_US0 + SZ_16K - 1, + .start = AT91RM9200_BASE_US0, + .end = AT91RM9200_BASE_US0 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US0, - .end = AT91_ID_US0, + .start = AT91RM9200_ID_US0, + .end = AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -624,13 +624,13 @@ static inline void configure_usart0_pins(void) static struct resource uart1_resources[] = { [0] = { - .start = AT91_BASE_US1, - .end = AT91_BASE_US1 + SZ_16K - 1, + .start = AT91RM9200_BASE_US1, + .end = AT91RM9200_BASE_US1 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US1, - .end = AT91_ID_US1, + .start = AT91RM9200_ID_US1, + .end = AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -665,13 +665,13 @@ static inline void configure_usart1_pins(void) static struct resource uart2_resources[] = { [0] = { - .start = AT91_BASE_US2, - .end = AT91_BASE_US2 + SZ_16K - 1, + .start = AT91RM9200_BASE_US2, + .end = AT91RM9200_BASE_US2 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US2, - .end = AT91_ID_US2, + .start = AT91RM9200_ID_US2, + .end = AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -700,13 +700,13 @@ static inline void configure_usart2_pins(void) static struct resource uart3_resources[] = { [0] = { - .start = AT91_BASE_US3, - .end = AT91_BASE_US3 + SZ_16K - 1, + .start = AT91RM9200_BASE_US3, + .end = AT91RM9200_BASE_US3 + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_US3, - .end = AT91_ID_US3, + .start = AT91RM9200_ID_US3, + .end = AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c index cec199fd6721..8476cb8856c9 100644 --- a/arch/arm/mach-at91rm9200/gpio.c +++ b/arch/arm/mach-at91rm9200/gpio.c @@ -261,10 +261,10 @@ void at91_gpio_suspend(void) at91_sys_write(pio_controller_offset[i] + PIO_IER, wakeups[i]); if (!wakeups[i]) { - disable_irq_wake(AT91_ID_PIOA + i); - at91_sys_write(AT91_PMC_PCDR, 1 << (AT91_ID_PIOA + i)); + disable_irq_wake(AT91RM9200_ID_PIOA + i); + at91_sys_write(AT91_PMC_PCDR, 1 << (AT91RM9200_ID_PIOA + i)); } else { - enable_irq_wake(AT91_ID_PIOA + i); + enable_irq_wake(AT91RM9200_ID_PIOA + i); #ifdef CONFIG_PM_DEBUG printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", "ABCD"[i], wakeups[i]); #endif @@ -282,10 +282,10 @@ void at91_gpio_resume(void) } at91_sys_write(AT91_PMC_PCER, - (1 << AT91_ID_PIOA) - | (1 << AT91_ID_PIOB) - | (1 << AT91_ID_PIOC) - | (1 << AT91_ID_PIOD)); + (1 << AT91RM9200_ID_PIOA) + | (1 << AT91RM9200_ID_PIOB) + | (1 << AT91RM9200_ID_PIOC) + | (1 << AT91RM9200_ID_PIOD)); } #else @@ -384,7 +384,7 @@ void __init at91_gpio_irq_setup(unsigned banks) if (banks > 4) banks = 4; - for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA; + for (pioc = 0, pin = PIN_BASE, id = AT91RM9200_ID_PIOA; pioc < banks; pioc++, id++) { void __iomem *controller; diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index c3a5e777f9f8..8cd60a99c5b8 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -61,12 +61,12 @@ static int at91_aic_set_type(unsigned irq, unsigned type) srctype = AT91_AIC_SRCTYPE_RISING; break; case IRQT_LOW: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_LOW; break; case IRQT_FALLING: - if ((irq > AT91_ID_FIQ) && (irq < AT91_ID_IRQ0)) /* only supported on external interrupts */ + if ((irq > AT91_ID_FIQ) && (irq < AT91RM9200_ID_IRQ0)) /* only supported on external interrupts */ return -EINVAL; srctype = AT91_AIC_SRCTYPE_FALLING; break; diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c index 47e5480feb7e..32c95d8eaacf 100644 --- a/arch/arm/mach-at91rm9200/pm.c +++ b/arch/arm/mach-at91rm9200/pm.c @@ -123,13 +123,13 @@ static int at91_pm_enter(suspend_state_t state) (at91_sys_read(AT91_PMC_PCSR) | (1 << AT91_ID_FIQ) | (1 << AT91_ID_SYS) - | (1 << AT91_ID_IRQ0) - | (1 << AT91_ID_IRQ1) - | (1 << AT91_ID_IRQ2) - | (1 << AT91_ID_IRQ3) - | (1 << AT91_ID_IRQ4) - | (1 << AT91_ID_IRQ5) - | (1 << AT91_ID_IRQ6)) + | (1 << AT91RM9200_ID_IRQ0) + | (1 << AT91RM9200_ID_IRQ1) + | (1 << AT91RM9200_ID_IRQ2) + | (1 << AT91RM9200_ID_IRQ3) + | (1 << AT91RM9200_ID_IRQ4) + | (1 << AT91RM9200_ID_IRQ5) + | (1 << AT91RM9200_ID_IRQ6)) & at91_sys_read(AT91_AIC_IMR), state); diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c index 6b7638b84290..4b3d4d637030 100644 --- a/drivers/mmc/at91_mci.c +++ b/drivers/mmc/at91_mci.c @@ -850,7 +850,7 @@ static int at91_mci_probe(struct platform_device *pdev) /* * Allocate the MCI interrupt */ - ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); + ret = request_irq(AT91RM9200_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host); if (ret) { printk(KERN_ERR "Failed to request MCI interrupt\n"); clk_disable(mci_clk); @@ -906,7 +906,7 @@ static int at91_mci_remove(struct platform_device *pdev) mmc_remove_host(mmc); at91_mci_disable(); - free_irq(AT91_ID_MCI, host); + free_irq(AT91RM9200_ID_MCI, host); mmc_free_host(mmc); clk_disable(mci_clk); /* Disable the peripheral clock */ diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 95b28aa01f4f..3ecf2cc53a7c 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add return -ENOMEM; dev->base_addr = AT91_VA_BASE_EMAC; - dev->irq = AT91_ID_EMAC; + dev->irq = AT91RM9200_ID_EMAC; SET_MODULE_OWNER(dev); /* Install the interrupt handler */ diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index 54c6b2adf7b7..bf4bf103e5a0 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -139,7 +139,7 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl) * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. * We need to drive the pin manually. */ - if (port->mapbase == AT91_BASE_US0) { + if (port->mapbase == AT91RM9200_BASE_US0) { if (mctrl & TIOCM_RTS) at91_set_gpio_value(AT91_PIN_PA21, 0); else diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index cfebca05ead5..043744f1ab72 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1658,7 +1658,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(AT91_BASE_UDP, SZ_16K, driver_name)) { + if (!request_mem_region(AT91RM9200_BASE_UDP, SZ_16K, driver_name)) { DBG("someone's using UDC memory\n"); return -EBUSY; } @@ -1720,7 +1720,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev) fail1: device_unregister(&udc->gadget.dev); fail0: - release_mem_region(AT91_BASE_UDP, SZ_16K); + release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); DBG("%s probe failed, %d\n", driver_name, retval); return retval; } @@ -1742,7 +1742,7 @@ static int __devexit at91udc_remove(struct platform_device *pdev) free_irq(udc->board.vbus_pin, udc); free_irq(udc->udp_irq, udc); device_unregister(&udc->gadget.dev); - release_mem_region(AT91_BASE_UDP, SZ_16K); + release_mem_region(AT91RM9200_BASE_UDP, SZ_16K); clk_put(udc->iclk); clk_put(udc->fclk); diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 58f40931a5c1..a5a86b1ff886 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -19,66 +19,79 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ -#define AT91_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT91_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT91_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT91_ID_PIOD 5 /* Parallel IO Controller D */ -#define AT91_ID_US0 6 /* USART 0 */ -#define AT91_ID_US1 7 /* USART 1 */ -#define AT91_ID_US2 8 /* USART 2 */ -#define AT91_ID_US3 9 /* USART 3 */ -#define AT91_ID_MCI 10 /* Multimedia Card Interface */ -#define AT91_ID_UDP 11 /* USB Device Port */ -#define AT91_ID_TWI 12 /* Two-Wire Interface */ -#define AT91_ID_SPI 13 /* Serial Peripheral Interface */ -#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT91_ID_TC0 17 /* Timer Counter 0 */ -#define AT91_ID_TC1 18 /* Timer Counter 1 */ -#define AT91_ID_TC2 19 /* Timer Counter 2 */ -#define AT91_ID_TC3 20 /* Timer Counter 3 */ -#define AT91_ID_TC4 21 /* Timer Counter 4 */ -#define AT91_ID_TC5 22 /* Timer Counter 5 */ -#define AT91_ID_UHP 23 /* USB Host port */ -#define AT91_ID_EMAC 24 /* Ethernet MAC */ -#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ -#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ -#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ -#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ -#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ -#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripheral */ +#define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91RM9200_ID_PIOD 5 /* Parallel IO Controller D */ +#define AT91RM9200_ID_US0 6 /* USART 0 */ +#define AT91RM9200_ID_US1 7 /* USART 1 */ +#define AT91RM9200_ID_US2 8 /* USART 2 */ +#define AT91RM9200_ID_US3 9 /* USART 3 */ +#define AT91RM9200_ID_MCI 10 /* Multimedia Card Interface */ +#define AT91RM9200_ID_UDP 11 /* USB Device Port */ +#define AT91RM9200_ID_TWI 12 /* Two-Wire Interface */ +#define AT91RM9200_ID_SPI 13 /* Serial Peripheral Interface */ +#define AT91RM9200_ID_SSC0 14 /* Serial Synchronous Controller 0 */ +#define AT91RM9200_ID_SSC1 15 /* Serial Synchronous Controller 1 */ +#define AT91RM9200_ID_SSC2 16 /* Serial Synchronous Controller 2 */ +#define AT91RM9200_ID_TC0 17 /* Timer Counter 0 */ +#define AT91RM9200_ID_TC1 18 /* Timer Counter 1 */ +#define AT91RM9200_ID_TC2 19 /* Timer Counter 2 */ +#define AT91RM9200_ID_TC3 20 /* Timer Counter 3 */ +#define AT91RM9200_ID_TC4 21 /* Timer Counter 4 */ +#define AT91RM9200_ID_TC5 22 /* Timer Counter 5 */ +#define AT91RM9200_ID_UHP 23 /* USB Host port */ +#define AT91RM9200_ID_EMAC 24 /* Ethernet MAC */ +#define AT91RM9200_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91RM9200_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91RM9200_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */ +#define AT91RM9200_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */ +#define AT91RM9200_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */ +#define AT91RM9200_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */ +#define AT91RM9200_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */ /* * Peripheral physical base addresses. */ -#define AT91_BASE_TCB0 0xfffa0000 -#define AT91_BASE_TC0 0xfffa0000 -#define AT91_BASE_TC1 0xfffa0040 -#define AT91_BASE_TC2 0xfffa0080 -#define AT91_BASE_TCB1 0xfffa4000 -#define AT91_BASE_TC3 0xfffa4000 -#define AT91_BASE_TC4 0xfffa4040 -#define AT91_BASE_TC5 0xfffa4080 -#define AT91_BASE_UDP 0xfffb0000 -#define AT91_BASE_MCI 0xfffb4000 -#define AT91_BASE_TWI 0xfffb8000 -#define AT91_BASE_EMAC 0xfffbc000 -#define AT91_BASE_US0 0xfffc0000 -#define AT91_BASE_US1 0xfffc4000 -#define AT91_BASE_US2 0xfffc8000 -#define AT91_BASE_US3 0xfffcc000 -#define AT91_BASE_SSC0 0xfffd0000 -#define AT91_BASE_SSC1 0xfffd4000 -#define AT91_BASE_SSC2 0xfffd8000 -#define AT91_BASE_SPI 0xfffe0000 +#define AT91RM9200_BASE_TCB0 0xfffa0000 +#define AT91RM9200_BASE_TC0 0xfffa0000 +#define AT91RM9200_BASE_TC1 0xfffa0040 +#define AT91RM9200_BASE_TC2 0xfffa0080 +#define AT91RM9200_BASE_TCB1 0xfffa4000 +#define AT91RM9200_BASE_TC3 0xfffa4000 +#define AT91RM9200_BASE_TC4 0xfffa4040 +#define AT91RM9200_BASE_TC5 0xfffa4080 +#define AT91RM9200_BASE_UDP 0xfffb0000 +#define AT91RM9200_BASE_MCI 0xfffb4000 +#define AT91RM9200_BASE_TWI 0xfffb8000 +#define AT91RM9200_BASE_EMAC 0xfffbc000 +#define AT91RM9200_BASE_US0 0xfffc0000 +#define AT91RM9200_BASE_US1 0xfffc4000 +#define AT91RM9200_BASE_US2 0xfffc8000 +#define AT91RM9200_BASE_US3 0xfffcc000 +#define AT91RM9200_BASE_SSC0 0xfffd0000 +#define AT91RM9200_BASE_SSC1 0xfffd4000 +#define AT91RM9200_BASE_SSC2 0xfffd8000 +#define AT91RM9200_BASE_SPI 0xfffe0000 #define AT91_BASE_SYS 0xfffff000 +/* + * Internal Memory. + */ +#define AT91RM9200_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91RM9200_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */ + +#define AT91RM9200_SRAM_BASE 0x00200000 /* Internal SRAM base address */ +#define AT91RM9200_SRAM_SIZE SZ_16K /* Internal SRAM size (16Kb) */ + +#define AT91RM9200_UHP_BASE 0x00300000 /* USB Host controller */ + + +#if 0 /* * PIO pin definitions (peripheral A/B multiplexing). */ @@ -257,5 +270,6 @@ #define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */ #define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */ #define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */ +#endif #endif diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h index dbde1baaf251..6243f28a0b81 100644 --- a/include/asm-arm/arch-at91rm9200/gpio.h +++ b/include/asm-arm/arch-at91rm9200/gpio.h @@ -20,7 +20,7 @@ #define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */ #define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */ -/* these pin numbers double as IRQ numbers, like AT91_ID_* values */ +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ #define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) #define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 235d39d91107..878e65f369bf 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -34,27 +34,23 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI) -#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2) -#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1) -#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0) -#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3) -#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2) -#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1) -#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC) -#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI) -#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI) -#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP) -#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1) -#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0) - -/* Internal SRAM */ -#define AT91_SRAM_BASE 0x00200000 /* Internal SRAM base address */ -#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */ +#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91RM9200_BASE_SPI) +#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91RM9200_BASE_SSC2) +#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91RM9200_BASE_SSC1) +#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91RM9200_BASE_SSC0) +#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91RM9200_BASE_US3) +#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91RM9200_BASE_US2) +#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91RM9200_BASE_US1) +#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91RM9200_BASE_US0) +#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) +#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91RM9200_BASE_TWI) +#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91RM9200_BASE_MCI) +#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91RM9200_BASE_UDP) +#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91RM9200_BASE_TCB1) +#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91RM9200_BASE_TCB0) /* Internal SRAM is mapped below the IO devices */ -#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_SIZE) +#define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) /* Serial ports */ #define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ @@ -71,9 +67,6 @@ /* Compact Flash */ #define AT91_CF_BASE 0x50000000 /* NCS4-NCS6: Compact Flash physical base address */ -/* Multi-Master Memory controller */ -#define AT91_UHP_BASE 0x00300000 /* USB Host controller */ - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index f63842c2c093..763cb96c418b 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -32,7 +32,7 @@ /* - * IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h + * IRQ interrupt symbols are the AT91xxx_ID_* symbols * for IRQs handled directly through the AIC, or else the AT91_PIN_* * symbols in gpio.h for ones handled indirectly as GPIOs. * We make provision for 4 banks of GPIO. -- GitLab