提交 71dc96e3 编写于 作者: L Linus Torvalds

Merge tag 'sound-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few collections of small eggs that have been gathered during the
  Easter holidays.  Mostly small ASoC fixes, with a HD-audio quirk and a
  workaround for Nvidia controller"

* tag 'sound-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Suppress CORBRP clear on Nvidia controller chips
  ALSA: hda - add headset mic detect quirk for a Dell laptop
  ASoC: jz4740: Remove Makefile entry for removed file
  ASoC: Intel: Fix audio crash due to negative address offset
  ASoC: dapm: Fix widget double free with auto-disable DAPM kcontrol
  ASoC: Intel: Fix incorrect sizeof() in sst_hsw_stream_get_volume()
  ASoC: Intel: some incorrect sizeof() usages
  ASoC: cs42l73: Convert to use devm_gpio_request_one
  ASoC: cs42l52: Convert to use devm_gpio_request_one
  ASoC: tlv320aic31xx: document that the regulators are mandatory
  ASoC: fsl_spdif: Fix wrong OFFSET of STC_SYSCLK_DIV
  ASoC: alc5623: Fix regmap endianness
  ASoC: tlv320aic3x: fix shared reset pin for DT
  ASoC: rsnd: fix clock prepare/unprepare
......@@ -13,6 +13,9 @@ Required properties:
"ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
- reg - <int> - I2C slave address
- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
DVDD-supply : power supplies for the device as covered in
Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
......@@ -24,9 +27,6 @@ Optional properties:
3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
If this node is not mentioned or if the value is unknown, then
micbias is set to 2.0V.
- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
DVDD-supply : power supplies for the device as covered in
Documentation/devicetree/bindings/regulator/regulator.txt
CODEC output pins:
* HPL
......
......@@ -1059,6 +1059,7 @@ static void azx_init_cmd_io(struct azx *chip)
/* reset the corb hw read pointer */
azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
if (!(chip->driver_caps & AZX_DCAPS_CORBRP_SELF_CLEAR)) {
for (timeout = 1000; timeout > 0; timeout--) {
if ((azx_readw(chip, CORBRP) & ICH6_CORBRP_RST) == ICH6_CORBRP_RST)
break;
......@@ -1077,6 +1078,7 @@ static void azx_init_cmd_io(struct azx *chip)
if (timeout <= 0)
dev_err(chip->card->dev, "CORB reset timeout#2, CORBRP = %d\n",
azx_readw(chip, CORBRP));
}
/* enable corb dma */
azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
......
......@@ -249,7 +249,8 @@ enum {
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT)
AZX_DCAPS_ALIGN_BUFSIZE | AZX_DCAPS_NO_64BIT |\
AZX_DCAPS_CORBRP_SELF_CLEAR)
#define AZX_DCAPS_PRESET_CTHDA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_4K_BDLE_BOUNDARY)
......
......@@ -189,6 +189,7 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */
#define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */
/* position fix mode */
enum {
......
......@@ -4621,6 +4621,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0668, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0669, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0674, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x067f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
......
......@@ -1018,13 +1018,13 @@ static int alc5623_i2c_probe(struct i2c_client *client,
dev_err(&client->dev, "failed to read vendor ID1: %d\n", ret);
return ret;
}
vid1 = ((vid1 & 0xff) << 8) | (vid1 >> 8);
ret = regmap_read(alc5623->regmap, ALC5623_VENDOR_ID2, &vid2);
if (ret < 0) {
dev_err(&client->dev, "failed to read vendor ID2: %d\n", ret);
return ret;
}
vid2 >>= 8;
if ((vid1 != 0x10ec) || (vid2 != id->driver_data)) {
dev_err(&client->dev, "unknown or wrong codec\n");
......
......@@ -1229,8 +1229,10 @@ static int cs42l52_i2c_probe(struct i2c_client *i2c_client,
}
if (cs42l52->pdata.reset_gpio) {
ret = gpio_request_one(cs42l52->pdata.reset_gpio,
GPIOF_OUT_INIT_HIGH, "CS42L52 /RST");
ret = devm_gpio_request_one(&i2c_client->dev,
cs42l52->pdata.reset_gpio,
GPIOF_OUT_INIT_HIGH,
"CS42L52 /RST");
if (ret < 0) {
dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
cs42l52->pdata.reset_gpio, ret);
......
......@@ -1443,8 +1443,10 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
i2c_set_clientdata(i2c_client, cs42l73);
if (cs42l73->pdata.reset_gpio) {
ret = gpio_request_one(cs42l73->pdata.reset_gpio,
GPIOF_OUT_INIT_HIGH, "CS42L73 /RST");
ret = devm_gpio_request_one(&i2c_client->dev,
cs42l73->pdata.reset_gpio,
GPIOF_OUT_INIT_HIGH,
"CS42L73 /RST");
if (ret < 0) {
dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
cs42l73->pdata.reset_gpio, ret);
......
......@@ -1399,7 +1399,6 @@ static int aic3x_probe(struct snd_soc_codec *codec)
}
aic3x_add_widgets(codec);
list_add(&aic3x->list, &reset_list);
return 0;
......@@ -1569,7 +1568,13 @@ static int aic3x_i2c_probe(struct i2c_client *i2c,
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_aic3x, &aic3x_dai, 1);
return ret;
if (ret != 0)
goto err_gpio;
list_add(&aic3x->list, &reset_list);
return 0;
err_gpio:
if (gpio_is_valid(aic3x->gpio_reset) &&
......
......@@ -144,8 +144,8 @@ enum spdif_gainsel {
/* SPDIF Clock register */
#define STC_SYSCLK_DIV_OFFSET 11
#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET)
#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
#define STC_SYSCLK_DIV_MASK (0x1ff << STC_SYSCLK_DIV_OFFSET)
#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_SYSCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
#define STC_TXCLK_SRC_OFFSET 8
#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET)
#define STC_TXCLK_SRC_SET(x) ((x << STC_TXCLK_SRC_OFFSET) & STC_TXCLK_SRC_MASK)
......
......@@ -136,7 +136,7 @@ struct sst_module_data {
enum sst_data_type data_type; /* type of module data */
u32 size; /* size in bytes */
u32 offset; /* offset in FW file */
int32_t offset; /* offset in FW file */
u32 data_offset; /* offset in ADSP memory space */
void *data; /* module data */
};
......
......@@ -617,7 +617,7 @@ static void hsw_notification_work(struct work_struct *work)
case IPC_POSITION_CHANGED:
trace_ipc_notification("DSP stream position changed for",
stream->reply.stream_hw_id);
sst_dsp_inbox_read(hsw->dsp, pos, sizeof(pos));
sst_dsp_inbox_read(hsw->dsp, pos, sizeof(*pos));
if (stream->notify_position)
stream->notify_position(stream, stream->pdata);
......@@ -991,7 +991,8 @@ int sst_hsw_stream_get_volume(struct sst_hsw *hsw, struct sst_hsw_stream *stream
return -EINVAL;
sst_dsp_read(hsw->dsp, volume,
stream->reply.volume_register_address[channel], sizeof(volume));
stream->reply.volume_register_address[channel],
sizeof(*volume));
return 0;
}
......@@ -1609,7 +1610,7 @@ int sst_hsw_dx_set_state(struct sst_hsw *hsw,
trace_ipc_request("PM enter Dx state", state);
ret = ipc_tx_message_wait(hsw, header, &state_, sizeof(state_),
dx, sizeof(dx));
dx, sizeof(*dx));
if (ret < 0) {
dev_err(hsw->dev, "ipc: error set dx state %d failed\n", state);
return ret;
......
#
# Jz4740 Platform Support
#
snd-soc-jz4740-objs := jz4740-pcm.o
snd-soc-jz4740-i2s-objs := jz4740-i2s.o
obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o
obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
# Jz4740 Machine Support
......
......@@ -258,7 +258,7 @@ static int rsnd_src_init(struct rsnd_mod *mod,
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
clk_enable(src->clk);
clk_prepare_enable(src->clk);
return 0;
}
......@@ -269,7 +269,7 @@ static int rsnd_src_quit(struct rsnd_mod *mod,
{
struct rsnd_src *src = rsnd_mod_to_src(mod);
clk_disable(src->clk);
clk_disable_unprepare(src->clk);
return 0;
}
......
......@@ -171,7 +171,7 @@ static void rsnd_ssi_hw_start(struct rsnd_ssi *ssi,
u32 cr;
if (0 == ssi->usrcnt) {
clk_enable(ssi->clk);
clk_prepare_enable(ssi->clk);
if (rsnd_dai_is_clk_master(rdai)) {
if (rsnd_ssi_clk_from_parent(ssi))
......@@ -230,7 +230,7 @@ static void rsnd_ssi_hw_stop(struct rsnd_ssi *ssi,
rsnd_ssi_master_clk_stop(ssi);
}
clk_disable(ssi->clk);
clk_disable_unprepare(ssi->clk);
}
dev_dbg(dev, "ssi%d hw stopped\n", rsnd_mod_id(&ssi->mod));
......
......@@ -254,7 +254,6 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,
static void dapm_kcontrol_free(struct snd_kcontrol *kctl)
{
struct dapm_kcontrol_data *data = snd_kcontrol_chip(kctl);
kfree(data->widget);
kfree(data->wlist);
kfree(data);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册