diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c deleted file mode 100644 index 2a3ecae67a905c44802e6c3b1bbd7f31321ef55f..0000000000000000000000000000000000000000 --- a/drivers/net/wan/cycx_drv.c +++ /dev/null @@ -1,569 +0,0 @@ -/* -* cycx_drv.c Cyclom 2X Support Module. -* -* This module is a library of common hardware specific -* functions used by the Cyclades Cyclom 2X sync card. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code -* cleanup -* 1999/11/08 acme init_cyc2x deleted, doing nothing -* 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and -* fromio to use dpmbase ioremaped -* 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to -* & fromio -* 1999/10/23 acme cleanup to only supports cyclom2x: all the other -* boards are no longer manufactured by cyclades, -* if someone wants to support them... be my guest! -* 1999/05/28 acme cycx_intack & cycx_intde gone for good -* 1999/05/18 acme lots of unlogged work, submitting to Linus... -* 1999/01/03 acme more judicious use of data types -* 1999/01/03 acme judicious use of data types :> -* cycx_inten trying to reset pending interrupts -* from cyclom 2x - I think this isn't the way to -* go, but for now... -* 1999/01/02 acme cycx_intack ok, I think there's nothing to do -* to ack an int in cycx_drv.c, only handle it in -* cyx_isr (or in the other protocols: cyp_isr, -* cyf_isr, when they get implemented. -* Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing -* fingers to see x25_configure in cycx_x25.c -* work... :) -* Dec 26, 1998 acme load implementation fixed, seems to work! :) -* cycx_2x_dpmbase_options with all the possible -* DPM addresses (20). -* cycx_intr implemented (test this!) -* general code cleanup -* Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation. -* Aug 8, 1998 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* __init */ -#include -#include /* printk(), and other useful stuff */ -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* API definitions */ -#include /* CYCX firmware module definitions */ -#include /* udelay, msleep_interruptible */ -#include /* read[wl], write[wl], ioremap, iounmap */ - -#define MOD_VERSION 0 -#define MOD_RELEASE 6 - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver"); -MODULE_LICENSE("GPL"); - -/* Hardware-specific functions */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len); -static void cycx_bootcfg(struct cycx_hw *hw); - -static int reset_cyc2x(void __iomem *addr); -static int detect_cyc2x(void __iomem *addr); - -/* Miscellaneous functions */ -static int get_option_index(const long *optlist, long optval); -static u16 checksum(u8 *buf, u32 len); - -#define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET) - -/* Global Data */ - -/* private data */ -static const char fullname[] = "Cyclom 2X Support Module"; -static const char copyright[] = - "(c) 1998-2003 Arnaldo Carvalho de Melo "; - -/* Hardware configuration options. - * These are arrays of configuration options used by verification routines. - * The first element of each array is its size (i.e. number of options). - */ -static const long cyc2x_dpmbase_options[] = { - 20, - 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000, - 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000, - 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000 -}; - -static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 }; - -/* Kernel Loadable Module Entry Points */ -/* Module 'insert' entry point. - * o print announcement - * o initialize static data - * - * Return: 0 Ok - * < 0 error. - * Context: process */ - -static int __init cycx_drv_init(void) -{ - pr_info("%s v%u.%u %s\n", - fullname, MOD_VERSION, MOD_RELEASE, copyright); - - return 0; -} - -/* Module 'remove' entry point. - * o release all remaining system resources */ -static void cycx_drv_cleanup(void) -{ -} - -/* Kernel APIs */ -/* Set up adapter. - * o detect adapter type - * o verify hardware configuration options - * o check for hardware conflicts - * o set up adapter shared memory - * o test adapter memory - * o load firmware - * Return: 0 ok. - * < 0 error */ -EXPORT_SYMBOL(cycx_setup); -int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase) -{ - int err; - - /* Verify IRQ configuration options */ - if (!get_option_index(cycx_2x_irq_options, hw->irq)) { - pr_err("IRQ %d is invalid!\n", hw->irq); - return -EINVAL; - } - - /* Setup adapter dual-port memory window and test memory */ - if (!dpmbase) { - pr_err("you must specify the dpm address!\n"); - return -EINVAL; - } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) { - pr_err("memory address 0x%lX is invalid!\n", dpmbase); - return -EINVAL; - } - - hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE); - hw->dpmsize = CYCX_WINDOWSIZE; - - if (!detect_cyc2x(hw->dpmbase)) { - pr_err("adapter Cyclom 2X not found at address 0x%lX!\n", - dpmbase); - return -EINVAL; - } - - pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase); - - /* Load firmware. If loader fails then shut down adapter */ - err = load_cyc2x(hw, cfm, len); - - if (err) - cycx_down(hw); /* shutdown adapter */ - - return err; -} - -EXPORT_SYMBOL(cycx_down); -int cycx_down(struct cycx_hw *hw) -{ - iounmap(hw->dpmbase); - return 0; -} - -/* Enable interrupt generation. */ -static void cycx_inten(struct cycx_hw *hw) -{ - writeb(0, hw->dpmbase); -} - -/* Generate an interrupt to adapter's CPU. */ -EXPORT_SYMBOL(cycx_intr); -void cycx_intr(struct cycx_hw *hw) -{ - writew(0, hw->dpmbase + GEN_CYCX_INTR); -} - -/* Execute Adapter Command. - * o Set exec flag. - * o Busy-wait until flag is reset. */ -EXPORT_SYMBOL(cycx_exec); -int cycx_exec(void __iomem *addr) -{ - u16 i = 0; - /* wait till addr content is zeroed */ - - while (readw(addr)) { - udelay(1000); - - if (++i > 50) - return -1; - } - - return 0; -} - -/* Read absolute adapter memory. - * Transfer data from adapter's memory to data buffer. */ -EXPORT_SYMBOL(cycx_peek); -int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - *(u8*)buf = readb(hw->dpmbase + addr); - else - memcpy_fromio(buf, hw->dpmbase + addr, len); - - return 0; -} - -/* Write Absolute Adapter Memory. - * Transfer data from data buffer to adapter's memory. */ -EXPORT_SYMBOL(cycx_poke); -int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len) -{ - if (len == 1) - writeb(*(u8*)buf, hw->dpmbase + addr); - else - memcpy_toio(hw->dpmbase + addr, buf, len); - - return 0; -} - -/* Hardware-Specific Functions */ - -/* Load Aux Routines */ -/* Reset board hardware. - return 1 if memory exists at addr and 0 if not. */ -static int memory_exists(void __iomem *addr) -{ - int tries = 0; - - for (; tries < 3 ; tries++) { - writew(TEST_PATTERN, addr + 0x10); - - if (readw(addr + 0x10) == TEST_PATTERN) - if (readw(addr + 0x10) == TEST_PATTERN) - return 1; - - msleep_interruptible(1 * 1000); - } - - return 0; -} - -/* Load reset code. */ -static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - void __iomem *pt_code = addr + RESET_OFFSET; - u16 i; /*, j; */ - - for (i = 0 ; i < cnt ; i++) { -/* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */ - writeb(*buffer++, pt_code++); - } -} - -/* Load buffer using boot interface. - * o copy data from buffer to Cyclom-X memory - * o wait for reset code to copy it to right portion of memory */ -static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt) -{ - memcpy_toio(addr + DATA_OFFSET, buffer, cnt); - writew(GEN_BOOT_DAT, addr + CMD_OFFSET); - - return wait_cyc(addr); -} - -/* Set up entry point and kick start Cyclom-X CPU. */ -static void cycx_start(void __iomem *addr) -{ - /* put in 0x30 offset the jump instruction to the code entry point */ - writeb(0xea, addr + 0x30); - writeb(0x00, addr + 0x31); - writeb(0xc4, addr + 0x32); - writeb(0x00, addr + 0x33); - writeb(0x00, addr + 0x34); - - /* cmd to start executing code */ - writew(GEN_START, addr + CMD_OFFSET); -} - -/* Load and boot reset code. */ -static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_start = addr + START_OFFSET; - - writeb(0xea, pt_start++); /* jmp to f000:3f00 */ - writeb(0x00, pt_start++); - writeb(0xfc, pt_start++); - writeb(0x00, pt_start++); - writeb(0xf0, pt_start); - reset_load(addr, code, len); - - /* 80186 was in hold, go */ - writeb(0, addr + START_CPU); - msleep_interruptible(1 * 1000); -} - -/* Load data.bin file through boot (reset) interface. */ -static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0, pt_boot_cmd + sizeof(u16)); - writew(0x4000, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - - -/* Load code.bin file through boot (reset) interface. */ -static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len) -{ - void __iomem *pt_boot_cmd = addr + CMD_OFFSET; - u32 i; - - /* boot buffer length */ - writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16)); - writew(GEN_DEFPAR, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - writew(0x0000, pt_boot_cmd + sizeof(u16)); - writew(0xc400, pt_boot_cmd + 2 * sizeof(u16)); - writew(GEN_SET_SEG, pt_boot_cmd); - - if (wait_cyc(addr) < 0) - return -1; - - for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ) - if (buffer_load(addr, code + i, - min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) { - pr_err("Error !!\n"); - return -1; - } - - return 0; -} - -/* Load adapter from the memory image of the CYCX firmware module. - * o verify firmware integrity and compatibility - * o start adapter up */ -static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len) -{ - int i, j; - struct cycx_fw_header *img_hdr; - u8 *reset_image, - *data_image, - *code_image; - void __iomem *pt_cycld = hw->dpmbase + 0x400; - u16 cksum; - - /* Announce */ - pr_info("firmware signature=\"%s\"\n", cfm->signature); - - /* Verify firmware signature */ - if (strcmp(cfm->signature, CFM_SIGNATURE)) { - pr_err("load_cyc2x: not Cyclom-2X firmware!\n"); - return -EINVAL; - } - - pr_info("firmware version=%u\n", cfm->version); - - /* Verify firmware module format version */ - if (cfm->version != CFM_VERSION) { - pr_err("%s: firmware format %u rejected! Expecting %u.\n", - __func__, cfm->version, CFM_VERSION); - return -EINVAL; - } - - /* Verify firmware module length and checksum */ - cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) + - cfm->info.codesize); -/* - FIXME cfm->info.codesize is off by 2 - if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) || -*/ - if (cksum != cfm->checksum) { - pr_err("%s: firmware corrupted!\n", __func__); - pr_err(" cdsize = 0x%x (expected 0x%lx)\n", - len - (int)sizeof(struct cycx_firmware) - 1, - cfm->info.codesize); - pr_err(" chksum = 0x%x (expected 0x%x)\n", - cksum, cfm->checksum); - return -EINVAL; - } - - /* If everything is ok, set reset, data and code pointers */ - img_hdr = (struct cycx_fw_header *)&cfm->image; -#ifdef FIRMWARE_DEBUG - pr_info("%s: image sizes\n", __func__); - pr_info(" reset=%lu\n", img_hdr->reset_size); - pr_info(" data=%lu\n", img_hdr->data_size); - pr_info(" code=%lu\n", img_hdr->code_size); -#endif - reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header); - data_image = reset_image + img_hdr->reset_size; - code_image = data_image + img_hdr->data_size; - - /*---- Start load ----*/ - /* Announce */ - pr_info("loading firmware %s (ID=%u)...\n", - cfm->descr[0] ? cfm->descr : "unknown firmware", - cfm->info.codeid); - - for (i = 0 ; i < 5 ; i++) { - /* Reset Cyclom hardware */ - if (!reset_cyc2x(hw->dpmbase)) { - pr_err("dpm problem or board not found\n"); - return -EINVAL; - } - - /* Load reset.bin */ - cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size); - /* reset is waiting for boot */ - writew(GEN_POWER_ON, pt_cycld); - msleep_interruptible(1 * 1000); - - for (j = 0 ; j < 3 ; j++) - if (!readw(pt_cycld)) - goto reset_loaded; - else - msleep_interruptible(1 * 1000); - } - - pr_err("reset not started\n"); - return -EINVAL; - -reset_loaded: - /* Load data.bin */ - if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) { - pr_err("cannot load data file\n"); - return -EINVAL; - } - - /* Load code.bin */ - if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) { - pr_err("cannot load code file\n"); - return -EINVAL; - } - - /* Prepare boot-time configuration data */ - cycx_bootcfg(hw); - - /* kick-off CPU */ - cycx_start(hw->dpmbase); - - /* Arthur Ganzert's tip: wait a while after the firmware loading... - seg abr 26 17:17:12 EST 1999 - acme */ - msleep_interruptible(7 * 1000); - pr_info("firmware loaded!\n"); - - /* enable interrupts */ - cycx_inten(hw); - - return 0; -} - -/* Prepare boot-time firmware configuration data. - * o initialize configuration data area - From async.doc - V_3.4.0 - 07/18/1994 - - As of now, only static buffers are available to the user. - So, the bit VD_RXDIRC must be set in 'valid'. That means that user - wants to use the static transmission and reception buffers. */ -static void cycx_bootcfg(struct cycx_hw *hw) -{ - /* use fixed buffers */ - writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET); -} - -/* Detect Cyclom 2x adapter. - * Following tests are used to detect Cyclom 2x adapter: - * to be completed based on the tests done below - * Return 1 if detected o.k. or 0 if failed. - * Note: This test is destructive! Adapter will be left in shutdown - * state after the test. */ -static int detect_cyc2x(void __iomem *addr) -{ - reset_cyc2x(addr); - - return memory_exists(addr); -} - -/* Miscellaneous */ -/* Get option's index into the options list. - * Return option's index (1 .. N) or zero if option is invalid. */ -static int get_option_index(const long *optlist, long optval) -{ - int i = 1; - - for (; i <= optlist[0]; ++i) - if (optlist[i] == optval) - return i; - - return 0; -} - -/* Reset adapter's CPU. */ -static int reset_cyc2x(void __iomem *addr) -{ - writeb(0, addr + RST_ENABLE); - msleep_interruptible(2 * 1000); - writeb(0, addr + RST_DISABLE); - msleep_interruptible(2 * 1000); - - return memory_exists(addr); -} - -/* Calculate 16-bit CRC using CCITT polynomial. */ -static u16 checksum(u8 *buf, u32 len) -{ - u16 crc = 0; - u16 mask, flag; - - for (; len; --len, ++buf) - for (mask = 0x80; mask; mask >>= 1) { - flag = (crc & 0x8000); - crc <<= 1; - crc |= ((*buf & mask) ? 1 : 0); - - if (flag) - crc ^= 0x1021; - } - - return crc; -} - -module_init(cycx_drv_init); -module_exit(cycx_drv_cleanup); - -/* End */ diff --git a/drivers/net/wan/cycx_main.c b/drivers/net/wan/cycx_main.c deleted file mode 100644 index 81fbbad406be4d9572f39ad062ffe1f1cd5bfbec..0000000000000000000000000000000000000000 --- a/drivers/net/wan/cycx_main.c +++ /dev/null @@ -1,346 +0,0 @@ -/* -* cycx_main.c Cyclades Cyclom 2X WAN Link Driver. Main module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdlamain.c by Gene Kozin & -* Jaspreet Singh -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Please look at the bitkeeper changelog (or any other scm tool that ends up -* importing bitkeeper changelog or that replaces bitkeeper in the future as -* main tool for linux development). -* -* 2001/05/09 acme Fix MODULE_DESC for debug, .bss nitpicks, -* some cleanups -* 2000/07/13 acme remove useless #ifdef MODULE and crap -* #if KERNEL_VERSION > blah -* 2000/07/06 acme __exit at cyclomx_cleanup -* 2000/04/02 acme dprintk and cycx_debug -* module_init/module_exit -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 2000/01/08 acme cleanup -* 1999/11/06 acme cycx_down back to life (it needs to be -* called to iounmap the dpmbase) -* 1999/08/09 acme removed references to enable_tx_int -* use spinlocks instead of cli/sti in -* cyclomx_set_state -* 1999/05/19 acme works directly linked into the kernel -* init_waitqueue_head for 2.3.* kernel -* 1999/05/18 acme major cleanup (polling not needed), etc -* 1998/08/28 acme minor cleanup (ioctls for firmware deleted) -* queue_task activated -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include /* offsetof(), etc. */ -#include /* return codes */ -#include /* inline memset(), etc. */ -#include /* kmalloc(), kfree() */ -#include /* printk(), and other useful stuff */ -#include /* support for loadable modules */ -#include /* request_region(), release_region() */ -#include /* WAN router definitions */ -#include /* cyclomx common user API definitions */ -#include /* __init (when not using as a module) */ -#include - -unsigned int cycx_debug; - -MODULE_AUTHOR("Arnaldo Carvalho de Melo"); -MODULE_DESCRIPTION("Cyclom 2X Sync Card Driver."); -MODULE_LICENSE("GPL"); -module_param(cycx_debug, int, 0); -MODULE_PARM_DESC(cycx_debug, "cyclomx debug level"); - -/* Defines & Macros */ - -#define CYCX_DRV_VERSION 0 /* version number */ -#define CYCX_DRV_RELEASE 11 /* release (minor version) number */ -#define CYCX_MAX_CARDS 1 /* max number of adapters */ - -#define CONFIG_CYCX_CARDS 1 - -/* Function Prototypes */ - -/* WAN link driver entry points */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf); -static int cycx_wan_shutdown(struct wan_device *wandev); - -/* Miscellaneous functions */ -static irqreturn_t cycx_isr(int irq, void *dev_id); - -/* Global Data - * Note: All data must be explicitly initialized!!! - */ - -/* private data */ -static const char cycx_drvname[] = "cyclomx"; -static const char cycx_fullname[] = "CYCLOM 2X(tm) Sync Card Driver"; -static const char cycx_copyright[] = "(c) 1998-2003 Arnaldo Carvalho de Melo " - ""; -static int cycx_ncards = CONFIG_CYCX_CARDS; -static struct cycx_device *cycx_card_array; /* adapter data space */ - -/* Kernel Loadable Module Entry Points */ - -/* - * Module 'insert' entry point. - * o print announcement - * o allocate adapter data space - * o initialize static data - * o register all cards with WAN router - * o calibrate Cyclom 2X shared memory access delay. - * - * Return: 0 Ok - * < 0 error. - * Context: process - */ -static int __init cycx_init(void) -{ - int cnt, err = -ENOMEM; - - pr_info("%s v%u.%u %s\n", - cycx_fullname, CYCX_DRV_VERSION, CYCX_DRV_RELEASE, - cycx_copyright); - - /* Verify number of cards and allocate adapter data space */ - cycx_ncards = min_t(int, cycx_ncards, CYCX_MAX_CARDS); - cycx_ncards = max_t(int, cycx_ncards, 1); - cycx_card_array = kcalloc(cycx_ncards, sizeof(struct cycx_device), GFP_KERNEL); - if (!cycx_card_array) - goto out; - - - /* Register adapters with WAN router */ - for (cnt = 0; cnt < cycx_ncards; ++cnt) { - struct cycx_device *card = &cycx_card_array[cnt]; - struct wan_device *wandev = &card->wandev; - - sprintf(card->devname, "%s%d", cycx_drvname, cnt + 1); - wandev->magic = ROUTER_MAGIC; - wandev->name = card->devname; - wandev->private = card; - wandev->setup = cycx_wan_setup; - wandev->shutdown = cycx_wan_shutdown; - err = register_wan_device(wandev); - - if (err) { - pr_err("%s registration failed with error %d!\n", - card->devname, err); - break; - } - } - - err = -ENODEV; - if (!cnt) { - kfree(cycx_card_array); - goto out; - } - err = 0; - cycx_ncards = cnt; /* adjust actual number of cards */ -out: return err; -} - -/* - * Module 'remove' entry point. - * o unregister all adapters from the WAN router - * o release all remaining system resources - */ -static void __exit cycx_exit(void) -{ - int i = 0; - - for (; i < cycx_ncards; ++i) { - struct cycx_device *card = &cycx_card_array[i]; - unregister_wan_device(card->devname); - } - - kfree(cycx_card_array); -} - -/* WAN Device Driver Entry Points */ -/* - * Setup/configure WAN link driver. - * o check adapter state - * o make sure firmware is present in configuration - * o allocate interrupt vector - * o setup Cyclom 2X hardware - * o call appropriate routine to perform protocol-specific initialization - * - * This function is called when router handles ROUTER_SETUP IOCTL. The - * configuration structure is in kernel memory (including extended data, if - * any). - */ -static int cycx_wan_setup(struct wan_device *wandev, wandev_conf_t *conf) -{ - int rc = -EFAULT; - struct cycx_device *card; - int irq; - - /* Sanity checks */ - - if (!wandev || !wandev->private || !conf) - goto out; - - card = wandev->private; - rc = -EBUSY; - if (wandev->state != WAN_UNCONFIGURED) - goto out; - - rc = -EINVAL; - if (!conf->data_size || !conf->data) { - pr_err("%s: firmware not found in configuration data!\n", - wandev->name); - goto out; - } - - if (conf->irq <= 0) { - pr_err("%s: can't configure without IRQ!\n", wandev->name); - goto out; - } - - /* Allocate IRQ */ - irq = conf->irq == 2 ? 9 : conf->irq; /* IRQ2 -> IRQ9 */ - - if (request_irq(irq, cycx_isr, 0, wandev->name, card)) { - pr_err("%s: can't reserve IRQ %d!\n", wandev->name, irq); - goto out; - } - - /* Configure hardware, load firmware, etc. */ - memset(&card->hw, 0, sizeof(card->hw)); - card->hw.irq = irq; - card->hw.dpmsize = CYCX_WINDOWSIZE; - card->hw.fwid = CFID_X25_2X; - spin_lock_init(&card->lock); - init_waitqueue_head(&card->wait_stats); - - rc = cycx_setup(&card->hw, conf->data, conf->data_size, conf->maddr); - if (rc) - goto out_irq; - - /* Initialize WAN device data space */ - wandev->irq = irq; - wandev->dma = wandev->ioport = 0; - wandev->maddr = (unsigned long)card->hw.dpmbase; - wandev->msize = card->hw.dpmsize; - wandev->hw_opt[2] = 0; - wandev->hw_opt[3] = card->hw.fwid; - - /* Protocol-specific initialization */ - switch (card->hw.fwid) { -#ifdef CONFIG_CYCLOMX_X25 - case CFID_X25_2X: - rc = cycx_x25_wan_init(card, conf); - break; -#endif - default: - pr_err("%s: this firmware is not supported!\n", wandev->name); - rc = -EINVAL; - } - - if (rc) { - cycx_down(&card->hw); - goto out_irq; - } - - rc = 0; -out: - return rc; -out_irq: - free_irq(irq, card); - goto out; -} - -/* - * Shut down WAN link driver. - * o shut down adapter hardware - * o release system resources. - * - * This function is called by the router when device is being unregistered or - * when it handles ROUTER_DOWN IOCTL. - */ -static int cycx_wan_shutdown(struct wan_device *wandev) -{ - int ret = -EFAULT; - struct cycx_device *card; - - /* sanity checks */ - if (!wandev || !wandev->private) - goto out; - - ret = 0; - if (wandev->state == WAN_UNCONFIGURED) - goto out; - - card = wandev->private; - wandev->state = WAN_UNCONFIGURED; - cycx_down(&card->hw); - pr_info("%s: irq %d being freed!\n", wandev->name, wandev->irq); - free_irq(wandev->irq, card); -out: return ret; -} - -/* Miscellaneous */ -/* - * Cyclom 2X Interrupt Service Routine. - * o acknowledge Cyclom 2X hardware interrupt. - * o call protocol-specific interrupt service routine, if any. - */ -static irqreturn_t cycx_isr(int irq, void *dev_id) -{ - struct cycx_device *card = dev_id; - - if (card->wandev.state == WAN_UNCONFIGURED) - goto out; - - if (card->in_isr) { - pr_warn("%s: interrupt re-entrancy on IRQ %d!\n", - card->devname, card->wandev.irq); - goto out; - } - - if (card->isr) - card->isr(card); - return IRQ_HANDLED; -out: - return IRQ_NONE; -} - -/* Set WAN device state. */ -void cycx_set_state(struct cycx_device *card, int state) -{ - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (card->wandev.state != state) { - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - break; - } - pr_info("%s: link %s\n", card->devname, string_state); - card->wandev.state = state; - } - - card->state_tick = jiffies; - spin_unlock_irqrestore(&card->lock, flags); -} - -module_init(cycx_init); -module_exit(cycx_exit); diff --git a/drivers/net/wan/cycx_x25.c b/drivers/net/wan/cycx_x25.c deleted file mode 100644 index 06f3f6309e4b30056bcb566ef767c2c1c581c5a9..0000000000000000000000000000000000000000 --- a/drivers/net/wan/cycx_x25.c +++ /dev/null @@ -1,1602 +0,0 @@ -/* -* cycx_x25.c Cyclom 2X WAN Link Driver. X.25 module. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdla_x25.c by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2001/01/12 acme use dev_kfree_skb_irq on interrupt context -* 2000/04/02 acme dprintk, cycx_debug -* fixed the bug introduced in get_dev_by_lcn and -* get_dev_by_dte_addr by the anonymous hacker -* that converted this driver to softnet -* 2000/01/08 acme cleanup -* 1999/10/27 acme use ARPHRD_HWX25 so that the X.25 stack know -* that we have a X.25 stack implemented in -* firmware onboard -* 1999/10/18 acme support for X.25 sockets in if_send, -* beware: socket(AF_X25...) IS WORK IN PROGRESS, -* TCP/IP over X.25 via wanrouter not affected, -* working. -* 1999/10/09 acme chan_disc renamed to chan_disconnect, -* began adding support for X.25 sockets: -* conf->protocol in new_if -* 1999/10/05 acme fixed return E... to return -E... -* 1999/08/10 acme serialized access to the card thru a spinlock -* in x25_exec -* 1999/08/09 acme removed per channel spinlocks -* removed references to enable_tx_int -* 1999/05/28 acme fixed nibble_to_byte, ackvc now properly treated -* if_send simplified -* 1999/05/25 acme fixed t1, t2, t21 & t23 configuration -* use spinlocks instead of cli/sti in some points -* 1999/05/24 acme finished the x25_get_stat function -* 1999/05/23 acme dev->type = ARPHRD_X25 (tcpdump only works, -* AFAIT, with ARPHRD_ETHER). This seems to be -* needed to use socket(AF_X25)... -* Now the config file must specify a peer media -* address for svc channels over a crossover cable. -* Removed hold_timeout from x25_channel_t, -* not used. -* A little enhancement in the DEBUG processing -* 1999/05/22 acme go to DISCONNECTED in disconnect_confirm_intr, -* instead of chan_disc. -* 1999/05/16 marcelo fixed timer initialization in SVCs -* 1999/01/05 acme x25_configure now get (most of) all -* parameters... -* 1999/01/05 acme pktlen now (correctly) uses log2 (value -* configured) -* 1999/01/03 acme judicious use of data types (u8, u16, u32, etc) -* 1999/01/03 acme cyx_isr: reset dpmbase to acknowledge -* indication (interrupt from cyclom 2x) -* 1999/01/02 acme cyx_isr: first hackings... -* 1999/01/0203 acme when initializing an array don't give less -* elements than declared... -* example: char send_cmd[6] = "?\xFF\x10"; -* you'll gonna lose a couple hours, 'cause your -* brain won't admit that there's an error in the -* above declaration... the side effect is that -* memset is put into the unresolved symbols -* instead of using the inline memset functions... -* 1999/01/02 acme began chan_connect, chan_send, x25_send -* 1998/12/31 acme x25_configure -* this code can be compiled as non module -* 1998/12/27 acme code cleanup -* IPX code wiped out! let's decrease code -* complexity for now, remember: I'm learning! :) -* bps_to_speed_code OK -* 1998/12/26 acme Minimal debug code cleanup -* 1998/08/08 acme Initial version. -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define CYCLOMX_X25_DEBUG 1 - -#include /* isdigit() */ -#include /* return codes */ -#include /* ARPHRD_HWX25 */ -#include /* printk(), and other useful stuff */ -#include -#include /* inline memset(), etc. */ -#include -#include /* kmalloc(), kfree() */ -#include /* offsetof(), etc. */ -#include /* WAN router definitions */ - -#include /* htons(), etc. */ - -#include /* Cyclom 2X common user API definitions */ -#include /* X.25 firmware API definitions */ - -#include - -/* Defines & Macros */ -#define CYCX_X25_MAX_CMD_RETRY 5 -#define CYCX_X25_CHAN_MTU 2048 /* unfragmented logical channel MTU */ - -/* Data Structures */ -/* This is an extension of the 'struct net_device' we create for each network - interface to keep the rest of X.25 channel-specific data. */ -struct cycx_x25_channel { - /* This member must be first. */ - struct net_device *slave; /* WAN slave */ - - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char *local_addr; /* local media address, ASCIIZ - - svc thru crossover cable */ - s16 lcn; /* logical channel number/conn.req.key*/ - u8 link; - struct timer_list timer; /* timer used for svc channel disc. */ - u16 protocol; /* ethertype, 0 - multiplexed */ - u8 svc; /* 0 - permanent, 1 - switched */ - u8 state; /* channel state */ - u8 drop_sequence; /* mark sequence for dropping */ - u32 idle_tmout; /* sec, before disconnecting */ - struct sk_buff *rx_skb; /* receive socket buffer */ - struct cycx_device *card; /* -> owner */ - struct net_device_stats ifstats;/* interface statistics */ -}; - -/* Function Prototypes */ -/* WAN link driver entry points. These are called by the WAN router module. */ -static int cycx_wan_update(struct wan_device *wandev), - cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf), - cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev); - -/* Network device interface */ -static int cycx_netdevice_init(struct net_device *dev); -static int cycx_netdevice_open(struct net_device *dev); -static int cycx_netdevice_stop(struct net_device *dev); -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len); -static int cycx_netdevice_rebuild_header(struct sk_buff *skb); -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev); - -static struct net_device_stats * - cycx_netdevice_get_stats(struct net_device *dev); - -/* Interrupt handlers */ -static void cycx_x25_irq_handler(struct cycx_device *card), - cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd), - cycx_x25_irq_log(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd), - cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd); - -/* X.25 firmware interface functions */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf), - cycx_x25_get_stats(struct cycx_device *card), - cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf), - cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan), - cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn); - -/* channel functions */ -static int cycx_x25_chan_connect(struct net_device *dev), - cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb); - -static void cycx_x25_chan_disconnect(struct net_device *dev), - cycx_x25_chan_send_event(struct net_device *dev, u8 event); - -/* Miscellaneous functions */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state), - cycx_x25_chan_timer(unsigned long d); - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble), - reset_timer(struct net_device *dev); - -static u8 bps_to_speed_code(u32 bps); -static u8 cycx_log2(u32 n); - -static unsigned dec_to_uint(u8 *str, int len); - -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn); -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte); - -static void cycx_x25_chan_setup(struct net_device *dev); - -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len); -static void cycx_x25_dump_config(struct cycx_x25_config *conf); -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats); -static void cycx_x25_dump_devs(struct wan_device *wandev); -#else -#define hex_dump(msg, p, len) -#define cycx_x25_dump_config(conf) -#define cycx_x25_dump_stats(stats) -#define cycx_x25_dump_devs(wandev) -#endif -/* Public Functions */ - -/* X.25 Protocol Initialization routine. - * - * This routine is called by the main Cyclom 2X module during setup. At this - * point adapter is completely initialized and X.25 firmware is running. - * o configure adapter - * o initialize protocol-specific fields of the adapter data space. - * - * Return: 0 o.k. - * < 0 failure. */ -int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf) -{ - struct cycx_x25_config cfg; - - /* Verify configuration ID */ - if (conf->config_id != WANCONFIG_X25) { - pr_info("%s: invalid configuration ID %u!\n", - card->devname, conf->config_id); - return -EINVAL; - } - - /* Initialize protocol-specific fields */ - card->mbox = card->hw.dpmbase + X25_MBOX_OFFS; - card->u.x.connection_keys = 0; - spin_lock_init(&card->u.x.lock); - - /* Configure adapter. Here we set reasonable defaults, then parse - * device configuration structure and set configuration options. - * Most configuration options are verified and corrected (if - * necessary) since we can't rely on the adapter to do so and don't - * want it to fail either. */ - memset(&cfg, 0, sizeof(cfg)); - cfg.link = 0; - cfg.clock = conf->clocking == WANOPT_EXTERNAL ? 8 : 55; - cfg.speed = bps_to_speed_code(conf->bps); - cfg.n3win = 7; - cfg.n2win = 2; - cfg.n2 = 5; - cfg.nvc = 1; - cfg.npvc = 1; - cfg.flags = 0x02; /* default = V35 */ - cfg.t1 = 10; /* line carrier timeout */ - cfg.t2 = 29; /* tx timeout */ - cfg.t21 = 180; /* CALL timeout */ - cfg.t23 = 180; /* CLEAR timeout */ - - /* adjust MTU */ - if (!conf->mtu || conf->mtu >= 512) - card->wandev.mtu = 512; - else if (conf->mtu >= 256) - card->wandev.mtu = 256; - else if (conf->mtu >= 128) - card->wandev.mtu = 128; - else - card->wandev.mtu = 64; - - cfg.pktlen = cycx_log2(card->wandev.mtu); - - if (conf->station == WANOPT_DTE) { - cfg.locaddr = 3; /* DTE */ - cfg.remaddr = 1; /* DCE */ - } else { - cfg.locaddr = 1; /* DCE */ - cfg.remaddr = 3; /* DTE */ - } - - if (conf->interface == WANOPT_RS232) - cfg.flags = 0; /* FIXME just reset the 2nd bit */ - - if (conf->u.x25.hi_pvc) { - card->u.x.hi_pvc = min_t(unsigned int, conf->u.x25.hi_pvc, 4095); - card->u.x.lo_pvc = min_t(unsigned int, conf->u.x25.lo_pvc, card->u.x.hi_pvc); - } - - if (conf->u.x25.hi_svc) { - card->u.x.hi_svc = min_t(unsigned int, conf->u.x25.hi_svc, 4095); - card->u.x.lo_svc = min_t(unsigned int, conf->u.x25.lo_svc, card->u.x.hi_svc); - } - - if (card->u.x.lo_pvc == 255) - cfg.npvc = 0; - else - cfg.npvc = card->u.x.hi_pvc - card->u.x.lo_pvc + 1; - - cfg.nvc = card->u.x.hi_svc - card->u.x.lo_svc + 1 + cfg.npvc; - - if (conf->u.x25.hdlc_window) - cfg.n2win = min_t(unsigned int, conf->u.x25.hdlc_window, 7); - - if (conf->u.x25.pkt_window) - cfg.n3win = min_t(unsigned int, conf->u.x25.pkt_window, 7); - - if (conf->u.x25.t1) - cfg.t1 = min_t(unsigned int, conf->u.x25.t1, 30); - - if (conf->u.x25.t2) - cfg.t2 = min_t(unsigned int, conf->u.x25.t2, 30); - - if (conf->u.x25.t11_t21) - cfg.t21 = min_t(unsigned int, conf->u.x25.t11_t21, 30); - - if (conf->u.x25.t13_t23) - cfg.t23 = min_t(unsigned int, conf->u.x25.t13_t23, 30); - - if (conf->u.x25.n2) - cfg.n2 = min_t(unsigned int, conf->u.x25.n2, 30); - - /* initialize adapter */ - if (cycx_x25_configure(card, &cfg)) - return -EIO; - - /* Initialize protocol-specific fields of adapter data space */ - card->wandev.bps = conf->bps; - card->wandev.interface = conf->interface; - card->wandev.clocking = conf->clocking; - card->wandev.station = conf->station; - card->isr = cycx_x25_irq_handler; - card->exec = NULL; - card->wandev.update = cycx_wan_update; - card->wandev.new_if = cycx_wan_new_if; - card->wandev.del_if = cycx_wan_del_if; - card->wandev.state = WAN_DISCONNECTED; - - return 0; -} - -/* WAN Device Driver Entry Points */ -/* Update device status & statistics. */ -static int cycx_wan_update(struct wan_device *wandev) -{ - /* sanity checks */ - if (!wandev || !wandev->private) - return -EFAULT; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - cycx_x25_get_stats(wandev->private); - - return 0; -} - -/* Create new logical channel. - * This routine is called by the router when ROUTER_IFNEW IOCTL is being - * handled. - * o parse media- and hardware-specific configuration - * o make sure that a new channel can be created - * o allocate resources, if necessary - * o prepare network device structure for registration. - * - * Return: 0 o.k. - * < 0 failure (channel will not be created) */ -static int cycx_wan_new_if(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf) -{ - struct cycx_device *card = wandev->private; - struct cycx_x25_channel *chan; - int err = 0; - - if (!conf->name[0] || strlen(conf->name) > WAN_IFNAME_SZ) { - pr_info("%s: invalid interface name!\n", card->devname); - return -EINVAL; - } - - dev = alloc_netdev(sizeof(struct cycx_x25_channel), conf->name, - cycx_x25_chan_setup); - if (!dev) - return -ENOMEM; - - chan = netdev_priv(dev); - strcpy(chan->name, conf->name); - chan->card = card; - chan->link = conf->port; - chan->protocol = conf->protocol ? ETH_P_X25 : ETH_P_IP; - chan->rx_skb = NULL; - /* only used in svc connected thru crossover cable */ - chan->local_addr = NULL; - - if (conf->addr[0] == '@') { /* SVC */ - int len = strlen(conf->local_addr); - - if (len) { - if (len > WAN_ADDRESS_SZ) { - pr_err("%s: %s local addr too long!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } else { - chan->local_addr = kmalloc(len + 1, GFP_KERNEL); - - if (!chan->local_addr) { - err = -ENOMEM; - goto error; - } - } - - strncpy(chan->local_addr, conf->local_addr, - WAN_ADDRESS_SZ); - } - - chan->svc = 1; - strncpy(chan->addr, &conf->addr[1], WAN_ADDRESS_SZ); - init_timer(&chan->timer); - chan->timer.function = cycx_x25_chan_timer; - chan->timer.data = (unsigned long)dev; - - /* Set channel timeouts (default if not specified) */ - chan->idle_tmout = conf->idle_timeout ? conf->idle_timeout : 90; - } else if (isdigit(conf->addr[0])) { /* PVC */ - s16 lcn = dec_to_uint(conf->addr, 0); - - if (lcn >= card->u.x.lo_pvc && lcn <= card->u.x.hi_pvc) - chan->lcn = lcn; - else { - pr_err("%s: PVC %u is out of range on interface %s!\n", - wandev->name, lcn, chan->name); - err = -EINVAL; - goto error; - } - } else { - pr_err("%s: invalid media address on interface %s!\n", - wandev->name, chan->name); - err = -EINVAL; - goto error; - } - - return 0; - -error: - free_netdev(dev); - return err; -} - -/* Delete logical channel. */ -static int cycx_wan_del_if(struct wan_device *wandev, struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - kfree(chan->local_addr); - if (chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - } - - return 0; -} - - -/* Network Device Interface */ - -static const struct header_ops cycx_header_ops = { - .create = cycx_netdevice_hard_header, - .rebuild = cycx_netdevice_rebuild_header, -}; - -static const struct net_device_ops cycx_netdev_ops = { - .ndo_init = cycx_netdevice_init, - .ndo_open = cycx_netdevice_open, - .ndo_stop = cycx_netdevice_stop, - .ndo_start_xmit = cycx_netdevice_hard_start_xmit, - .ndo_get_stats = cycx_netdevice_get_stats, -}; - -static void cycx_x25_chan_setup(struct net_device *dev) -{ - /* Initialize device driver entry points */ - dev->netdev_ops = &cycx_netdev_ops; - dev->header_ops = &cycx_header_ops; - - /* Initialize media-specific parameters */ - dev->mtu = CYCX_X25_CHAN_MTU; - dev->type = ARPHRD_HWX25; /* ARP h/w type */ - dev->hard_header_len = 0; /* media header length */ - dev->addr_len = 0; /* hardware address length */ -} - -/* Initialize Linux network interface. - * - * This routine is called only once for each interface, during Linux network - * interface registration. Returning anything but zero will fail interface - * registration. */ -static int cycx_netdevice_init(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - struct wan_device *wandev = &card->wandev; - - if (!chan->svc) - *(__be16*)dev->dev_addr = htons(chan->lcn); - - /* Initialize hardware parameters (just for reference) */ - dev->irq = wandev->irq; - dev->dma = wandev->dma; - dev->base_addr = wandev->ioport; - dev->mem_start = (unsigned long)wandev->maddr; - dev->mem_end = (unsigned long)(wandev->maddr + - wandev->msize - 1); - dev->flags |= IFF_NOARP; - - /* Set transmit buffer queue length */ - dev->tx_queue_len = 10; - - /* Initialize socket buffers */ - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - - return 0; -} - -/* Open network interface. - * o prevent module from unloading by incrementing use count - * o if link is disconnected then initiate connection - * - * Return 0 if O.k. or errno. */ -static int cycx_netdevice_open(struct net_device *dev) -{ - if (netif_running(dev)) - return -EBUSY; /* only one open is allowed */ - - netif_start_queue(dev); - return 0; -} - -/* Close network interface. - * o reset flags. - * o if there's no more open channels then disconnect physical link. */ -static int cycx_netdevice_stop(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - netif_stop_queue(dev); - - if (chan->state == WAN_CONNECTED || chan->state == WAN_CONNECTING) - cycx_x25_chan_disconnect(dev); - - return 0; -} - -/* Build media header. - * o encapsulate packet according to encapsulation type. - * - * The trick here is to put packet type (Ethertype) into 'protocol' field of - * the socket buffer, so that we don't forget it. If encapsulation fails, - * set skb->protocol to 0 and discard packet later. - * - * Return: media header length. */ -static int cycx_netdevice_hard_header(struct sk_buff *skb, - struct net_device *dev, u16 type, - const void *daddr, const void *saddr, - unsigned len) -{ - skb->protocol = htons(type); - - return dev->hard_header_len; -} - -/* * Re-build media header. - * Return: 1 physical address resolved. - * 0 physical address not resolved */ -static int cycx_netdevice_rebuild_header(struct sk_buff *skb) -{ - return 1; -} - -/* Send a packet on a network interface. - * o set busy flag (marks start of the transmission). - * o check link state. If link is not up, then drop the packet. - * o check channel status. If it's down then initiate a call. - * o pass a packet to corresponding WAN device. - * o free socket buffer - * - * Return: 0 complete (socket buffer must be freed) - * non-0 packet may be re-transmitted (tbusy must be set) - * - * Notes: - * 1. This routine is called either by the protocol stack or by the "net - * bottom half" (with interrupts enabled). - * 2. Setting tbusy flag will inhibit further transmit requests from the - * protocol stack and can be used for flow control with protocol layer. */ -static netdev_tx_t cycx_netdevice_hard_start_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (!chan->svc) - chan->protocol = ntohs(skb->protocol); - - if (card->wandev.state != WAN_CONNECTED) - ++chan->ifstats.tx_dropped; - else if (chan->svc && chan->protocol && - chan->protocol != ntohs(skb->protocol)) { - pr_info("%s: unsupported Ethertype 0x%04X on interface %s!\n", - card->devname, ntohs(skb->protocol), dev->name); - ++chan->ifstats.tx_errors; - } else if (chan->protocol == ETH_P_IP) { - switch (chan->state) { - case WAN_DISCONNECTED: - if (cycx_x25_chan_connect(dev)) { - netif_stop_queue(dev); - return NETDEV_TX_BUSY; - } - /* fall thru */ - case WAN_CONNECTED: - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) - return NETDEV_TX_BUSY; - - break; - default: - ++chan->ifstats.tx_dropped; - ++card->wandev.stats.tx_dropped; - } - } else { /* chan->protocol == ETH_P_X25 */ - switch (skb->data[0]) { - case X25_IFACE_DATA: - break; - case X25_IFACE_CONNECT: - cycx_x25_chan_connect(dev); - goto free_packet; - case X25_IFACE_DISCONNECT: - cycx_x25_chan_disconnect(dev); - goto free_packet; - default: - pr_info("%s: unknown %d x25-iface request on %s!\n", - card->devname, skb->data[0], dev->name); - ++chan->ifstats.tx_errors; - goto free_packet; - } - - skb_pull(skb, 1); /* Remove control byte */ - reset_timer(dev); - dev->trans_start = jiffies; - netif_stop_queue(dev); - - if (cycx_x25_chan_send(dev, skb)) { - /* prepare for future retransmissions */ - skb_push(skb, 1); - return NETDEV_TX_BUSY; - } - } - -free_packet: - dev_kfree_skb(skb); - - return NETDEV_TX_OK; -} - -/* Get Ethernet-style interface statistics. - * Return a pointer to struct net_device_stats */ -static struct net_device_stats *cycx_netdevice_get_stats(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - return chan ? &chan->ifstats : NULL; -} - -/* Interrupt Handlers */ -/* X.25 Interrupt Service Routine. */ -static void cycx_x25_irq_handler(struct cycx_device *card) -{ - struct cycx_x25_cmd cmd; - u16 z = 0; - - card->in_isr = 1; - card->buff_int_mode_unbusy = 0; - cycx_peek(&card->hw, X25_RXMBOX_OFFS, &cmd, sizeof(cmd)); - - switch (cmd.command) { - case X25_DATA_INDICATION: - cycx_x25_irq_rx(card, &cmd); - break; - case X25_ACK_FROM_VC: - cycx_x25_irq_tx(card, &cmd); - break; - case X25_LOG: - cycx_x25_irq_log(card, &cmd); - break; - case X25_STATISTIC: - cycx_x25_irq_stat(card, &cmd); - break; - case X25_CONNECT_CONFIRM: - cycx_x25_irq_connect_confirm(card, &cmd); - break; - case X25_CONNECT_INDICATION: - cycx_x25_irq_connect(card, &cmd); - break; - case X25_DISCONNECT_INDICATION: - cycx_x25_irq_disconnect(card, &cmd); - break; - case X25_DISCONNECT_CONFIRM: - cycx_x25_irq_disconnect_confirm(card, &cmd); - break; - case X25_LINE_ON: - cycx_set_state(card, WAN_CONNECTED); - break; - case X25_LINE_OFF: - cycx_set_state(card, WAN_DISCONNECTED); - break; - default: - cycx_x25_irq_spurious(card, &cmd); - break; - } - - cycx_poke(&card->hw, 0, &z, sizeof(z)); - cycx_poke(&card->hw, X25_RXMBOX_OFFS, &z, sizeof(z)); - card->in_isr = 0; -} - -/* Transmit interrupt handler. - * o Release socket buffer - * o Clear 'tbusy' flag */ -static void cycx_x25_irq_tx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct net_device *dev; - struct wan_device *wandev = &card->wandev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - - /* unbusy device and then dev_tint(); */ - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - card->buff_int_mode_unbusy = 1; - netif_wake_queue(dev); - } else - pr_err("%s:ackvc for inexistent lcn %d\n", card->devname, lcn); -} - -/* Receive interrupt handler. - * This routine handles fragmented IP packets using M-bit according to the - * RFC1356. - * o map logical channel number to network interface. - * o allocate socket buffer or append received packet to the existing one. - * o if M-bit is reset (i.e. it's the last packet in a sequence) then - * decapsulate packet and pass socket buffer to the protocol stack. - * - * Notes: - * 1. When allocating a socket buffer, if M-bit is set then more data is - * coming and we have to allocate buffer for the maximum IP packet size - * expected on this channel. - * 2. If something goes wrong and X.25 packet has to be dropped (e.g. no - * socket buffers available) the whole packet sequence must be discarded. */ -static void cycx_x25_irq_rx(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - struct sk_buff *skb; - u8 bitm, lcn; - int pktlen = cmd->len - 5; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 4, &bitm, sizeof(bitm)); - bitm &= 0x10; - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: receiving on orphaned LCN %d!\n", - card->devname, lcn); - return; - } - - chan = netdev_priv(dev); - reset_timer(dev); - - if (chan->drop_sequence) { - if (!bitm) - chan->drop_sequence = 0; - else - return; - } - - if ((skb = chan->rx_skb) == NULL) { - /* Allocate new socket buffer */ - int bufsize = bitm ? dev->mtu : pktlen; - - if ((skb = dev_alloc_skb((chan->protocol == ETH_P_X25 ? 1 : 0) + - bufsize + - dev->hard_header_len)) == NULL) { - pr_info("%s: no socket buffers available!\n", - card->devname); - chan->drop_sequence = 1; - ++chan->ifstats.rx_dropped; - return; - } - - if (chan->protocol == ETH_P_X25) /* X.25 socket layer control */ - /* 0 = data packet (dev_alloc_skb zeroed skb->data) */ - skb_put(skb, 1); - - skb->dev = dev; - skb->protocol = htons(chan->protocol); - chan->rx_skb = skb; - } - - if (skb_tailroom(skb) < pktlen) { - /* No room for the packet. Call off the whole thing! */ - dev_kfree_skb_irq(skb); - chan->rx_skb = NULL; - - if (bitm) - chan->drop_sequence = 1; - - pr_info("%s: unexpectedly long packet sequence on interface %s!\n", - card->devname, dev->name); - ++chan->ifstats.rx_length_errors; - return; - } - - /* Append packet to the socket buffer */ - cycx_peek(&card->hw, cmd->buf + 5, skb_put(skb, pktlen), pktlen); - - if (bitm) - return; /* more data is coming */ - - chan->rx_skb = NULL; /* dequeue packet */ - - ++chan->ifstats.rx_packets; - chan->ifstats.rx_bytes += pktlen; - - skb_reset_mac_header(skb); - netif_rx(skb); -} - -/* Connect interrupt handler. */ -static void cycx_x25_irq_connect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev = NULL; - struct cycx_x25_channel *chan; - u8 d[32], - loc[24], - rem[24]; - u8 lcn, sizeloc, sizerem; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 5, &sizeloc, sizeof(sizeloc)); - cycx_peek(&card->hw, cmd->buf + 6, d, cmd->len - 6); - - sizerem = sizeloc >> 4; - sizeloc &= 0x0F; - - loc[0] = rem[0] = '\0'; - - if (sizeloc) - nibble_to_byte(d, loc, sizeloc, 0); - - if (sizerem) - nibble_to_byte(d + (sizeloc >> 1), rem, sizerem, sizeloc & 1); - - dprintk(1, KERN_INFO "%s:lcn=%d, local=%s, remote=%s\n", - __func__, lcn, loc, rem); - - dev = cycx_x25_get_dev_by_dte_addr(wandev, rem); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s: connect not expected: remote %s!\n", - card->devname, rem); - return; - } - - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_connect_response(card, chan); - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Connect confirm interrupt handler. */ -static void cycx_x25_irq_connect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - struct cycx_x25_channel *chan; - u8 lcn, key; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - cycx_peek(&card->hw, cmd->buf + 1, &key, sizeof(key)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d, key=%d\n", - card->devname, __func__, lcn, key); - - dev = cycx_x25_get_dev_by_lcn(wandev, -key); - if (!dev) { - /* Invalid channel, discard packet */ - clear_bit(--key, (void*)&card->u.x.connection_keys); - pr_info("%s: connect confirm not expected: lcn %d, key=%d!\n", - card->devname, lcn, key); - return; - } - - clear_bit(--key, (void*)&card->u.x.connection_keys); - chan = netdev_priv(dev); - chan->lcn = lcn; - cycx_x25_set_chan_state(dev, WAN_CONNECTED); -} - -/* Disconnect confirm interrupt handler. */ -static void cycx_x25_irq_disconnect_confirm(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s: %s:lcn=%d\n", - card->devname, __func__, lcn); - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (!dev) { - /* Invalid channel, discard packet */ - pr_info("%s:disconnect confirm not expected!:lcn %d\n", - card->devname, lcn); - return; - } - - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* disconnect interrupt handler. */ -static void cycx_x25_irq_disconnect(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - struct wan_device *wandev = &card->wandev; - struct net_device *dev; - u8 lcn; - - cycx_peek(&card->hw, cmd->buf, &lcn, sizeof(lcn)); - dprintk(1, KERN_INFO "%s:lcn=%d\n", __func__, lcn); - - dev = cycx_x25_get_dev_by_lcn(wandev, lcn); - if (dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - cycx_x25_disconnect_response(card, chan->link, lcn); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); - } else - cycx_x25_disconnect_response(card, 0, lcn); -} - -/* LOG interrupt handler. */ -static void cycx_x25_irq_log(struct cycx_device *card, struct cycx_x25_cmd *cmd) -{ -#if CYCLOMX_X25_DEBUG - char bf[20]; - u16 size, toread, link, msg_code; - u8 code, routine; - - cycx_peek(&card->hw, cmd->buf, &msg_code, sizeof(msg_code)); - cycx_peek(&card->hw, cmd->buf + 2, &link, sizeof(link)); - cycx_peek(&card->hw, cmd->buf + 4, &size, sizeof(size)); - /* at most 20 bytes are available... thanks to Daniela :) */ - toread = size < 20 ? size : 20; - cycx_peek(&card->hw, cmd->buf + 10, &bf, toread); - cycx_peek(&card->hw, cmd->buf + 10 + toread, &code, 1); - cycx_peek(&card->hw, cmd->buf + 10 + toread + 1, &routine, 1); - - pr_info("cycx_x25_irq_handler: X25_LOG (0x4500) indic.:\n"); - pr_info("cmd->buf=0x%X\n", cmd->buf); - pr_info("Log message code=0x%X\n", msg_code); - pr_info("Link=%d\n", link); - pr_info("log code=0x%X\n", code); - pr_info("log routine=0x%X\n", routine); - pr_info("Message size=%d\n", size); - hex_dump("Message", bf, toread); -#endif -} - -/* STATISTIC interrupt handler. */ -static void cycx_x25_irq_stat(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - cycx_peek(&card->hw, cmd->buf, &card->u.x.stats, - sizeof(card->u.x.stats)); - hex_dump("cycx_x25_irq_stat", (unsigned char*)&card->u.x.stats, - sizeof(card->u.x.stats)); - cycx_x25_dump_stats(&card->u.x.stats); - wake_up_interruptible(&card->wait_stats); -} - -/* Spurious interrupt handler. - * o print a warning - * If number of spurious interrupts exceeded some limit, then ??? */ -static void cycx_x25_irq_spurious(struct cycx_device *card, - struct cycx_x25_cmd *cmd) -{ - pr_info("%s: spurious interrupt (0x%X)!\n", - card->devname, cmd->command); -} -#ifdef CYCLOMX_X25_DEBUG -static void hex_dump(char *msg, unsigned char *p, int len) -{ - print_hex_dump(KERN_INFO, msg, DUMP_PREFIX_OFFSET, 16, 1, - p, len, true); -} -#endif - -/* Cyclom 2X Firmware-Specific Functions */ -/* Exec X.25 command. */ -static int x25_exec(struct cycx_device *card, int command, int link, - void *d1, int len1, void *d2, int len2) -{ - struct cycx_x25_cmd c; - unsigned long flags; - u32 addr = 0x1200 + 0x2E0 * link + 0x1E2; - u8 retry = CYCX_X25_MAX_CMD_RETRY; - int err = 0; - - c.command = command; - c.link = link; - c.len = len1 + len2; - - spin_lock_irqsave(&card->u.x.lock, flags); - - /* write command */ - cycx_poke(&card->hw, X25_MBOX_OFFS, &c, sizeof(c) - sizeof(c.buf)); - - /* write X.25 data */ - if (d1) { - cycx_poke(&card->hw, addr, d1, len1); - - if (d2) { - if (len2 > 254) { - u32 addr1 = 0xA00 + 0x400 * link; - - cycx_poke(&card->hw, addr + len1, d2, 249); - cycx_poke(&card->hw, addr1, ((u8*)d2) + 249, - len2 - 249); - } else - cycx_poke(&card->hw, addr + len1, d2, len2); - } - } - - /* generate interruption, executing command */ - cycx_intr(&card->hw); - - /* wait till card->mbox == 0 */ - do { - err = cycx_exec(card->mbox); - } while (retry-- && err); - - spin_unlock_irqrestore(&card->u.x.lock, flags); - - return err; -} - -/* Configure adapter. */ -static int cycx_x25_configure(struct cycx_device *card, - struct cycx_x25_config *conf) -{ - struct { - u16 nlinks; - struct cycx_x25_config conf[2]; - } x25_cmd_conf; - - memset(&x25_cmd_conf, 0, sizeof(x25_cmd_conf)); - x25_cmd_conf.nlinks = 2; - x25_cmd_conf.conf[0] = *conf; - /* FIXME: we need to find a way in the wanrouter framework - to configure the second link, for now lets use it - with the same config from the first link, fixing - the interface type to RS232, the speed in 38400 and - the clock to external */ - x25_cmd_conf.conf[1] = *conf; - x25_cmd_conf.conf[1].link = 1; - x25_cmd_conf.conf[1].speed = 5; /* 38400 */ - x25_cmd_conf.conf[1].clock = 8; - x25_cmd_conf.conf[1].flags = 0; /* default = RS232 */ - - cycx_x25_dump_config(&x25_cmd_conf.conf[0]); - cycx_x25_dump_config(&x25_cmd_conf.conf[1]); - - return x25_exec(card, X25_CONFIG, 0, - &x25_cmd_conf, sizeof(x25_cmd_conf), NULL, 0); -} - -/* Get protocol statistics. */ -static int cycx_x25_get_stats(struct cycx_device *card) -{ - /* the firmware expects 20 in the size field!!! - thanks to Daniela */ - int err = x25_exec(card, X25_STATISTIC, 0, NULL, 20, NULL, 0); - - if (err) - return err; - - interruptible_sleep_on(&card->wait_stats); - - if (signal_pending(current)) - return -EINTR; - - card->wandev.stats.rx_packets = card->u.x.stats.n2_rx_frames; - card->wandev.stats.rx_over_errors = card->u.x.stats.rx_over_errors; - card->wandev.stats.rx_crc_errors = card->u.x.stats.rx_crc_errors; - card->wandev.stats.rx_length_errors = 0; /* not available from fw */ - card->wandev.stats.rx_frame_errors = 0; /* not available from fw */ - card->wandev.stats.rx_missed_errors = card->u.x.stats.rx_aborts; - card->wandev.stats.rx_dropped = 0; /* not available from fw */ - card->wandev.stats.rx_errors = 0; /* not available from fw */ - card->wandev.stats.tx_packets = card->u.x.stats.n2_tx_frames; - card->wandev.stats.tx_aborted_errors = card->u.x.stats.tx_aborts; - card->wandev.stats.tx_dropped = 0; /* not available from fw */ - card->wandev.stats.collisions = 0; /* not available from fw */ - card->wandev.stats.tx_errors = 0; /* not available from fw */ - - cycx_x25_dump_devs(&card->wandev); - - return 0; -} - -/* return the number of nibbles */ -static int byte_to_nibble(u8 *s, u8 *d, char *nibble) -{ - int i = 0; - - if (*nibble && *s) { - d[i] |= *s++ - '0'; - *nibble = 0; - ++i; - } - - while (*s) { - d[i] = (*s - '0') << 4; - if (*(s + 1)) - d[i] |= *(s + 1) - '0'; - else { - *nibble = 1; - break; - } - ++i; - s += 2; - } - - return i; -} - -static void nibble_to_byte(u8 *s, u8 *d, u8 len, u8 nibble) -{ - if (nibble) { - *d++ = '0' + (*s++ & 0x0F); - --len; - } - - while (len) { - *d++ = '0' + (*s >> 4); - - if (--len) { - *d++ = '0' + (*s & 0x0F); - --len; - } else break; - - ++s; - } - - *d = '\0'; -} - -/* Place X.25 call. */ -static int x25_place_call(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - int err = 0, - len; - char d[64], - nibble = 0, - mylen = chan->local_addr ? strlen(chan->local_addr) : 0, - remotelen = strlen(chan->addr); - u8 key; - - if (card->u.x.connection_keys == ~0U) { - pr_info("%s: too many simultaneous connection requests!\n", - card->devname); - return -EAGAIN; - } - - key = ffz(card->u.x.connection_keys); - set_bit(key, (void*)&card->u.x.connection_keys); - ++key; - dprintk(1, KERN_INFO "%s:x25_place_call:key=%d\n", card->devname, key); - memset(d, 0, sizeof(d)); - d[1] = key; /* user key */ - d[2] = 0x10; - d[4] = 0x0B; - - len = byte_to_nibble(chan->addr, d + 6, &nibble); - - if (chan->local_addr) - len += byte_to_nibble(chan->local_addr, d + 6 + len, &nibble); - - if (nibble) - ++len; - - d[5] = mylen << 4 | remotelen; - d[6 + len + 1] = 0xCC; /* TCP/IP over X.25, thanks to Daniela :) */ - - if ((err = x25_exec(card, X25_CONNECT_REQUEST, chan->link, - &d, 7 + len + 1, NULL, 0)) != 0) - clear_bit(--key, (void*)&card->u.x.connection_keys); - else - chan->lcn = -key; - - return err; -} - -/* Place X.25 CONNECT RESPONSE. */ -static int cycx_x25_connect_response(struct cycx_device *card, - struct cycx_x25_channel *chan) -{ - u8 d[8]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = chan->lcn; - d[2] = 0x10; - d[4] = 0x0F; - d[7] = 0xCC; /* TCP/IP over X.25, thanks Daniela */ - - return x25_exec(card, X25_CONNECT_RESPONSE, chan->link, &d, 8, NULL, 0); -} - -/* Place X.25 DISCONNECT RESPONSE. */ -static int cycx_x25_disconnect_response(struct cycx_device *card, u8 link, - u8 lcn) -{ - char d[5]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x17; - - return x25_exec(card, X25_DISCONNECT_RESPONSE, link, &d, 5, NULL, 0); -} - -/* Clear X.25 call. */ -static int x25_clear_call(struct cycx_device *card, u8 link, u8 lcn, u8 cause, - u8 diagn) -{ - u8 d[7]; - - memset(d, 0, sizeof(d)); - d[0] = d[3] = lcn; - d[2] = 0x10; - d[4] = 0x13; - d[5] = cause; - d[6] = diagn; - - return x25_exec(card, X25_DISCONNECT_REQUEST, link, d, 7, NULL, 0); -} - -/* Send X.25 data packet. */ -static int cycx_x25_send(struct cycx_device *card, u8 link, u8 lcn, u8 bitm, - int len, void *buf) -{ - u8 d[] = "?\xFF\x10??"; - - d[0] = d[3] = lcn; - d[4] = bitm; - - return x25_exec(card, X25_DATA_REQUEST, link, &d, 5, buf, len); -} - -/* Miscellaneous */ -/* Find network device by its channel number. */ -static struct net_device *cycx_x25_get_dev_by_lcn(struct wan_device *wandev, - s16 lcn) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (chan->lcn == lcn) - break; - dev = chan->slave; - } - return dev; -} - -/* Find network device by its remote dte address. */ -static struct net_device * - cycx_x25_get_dev_by_dte_addr(struct wan_device *wandev, char *dte) -{ - struct net_device *dev = wandev->dev; - struct cycx_x25_channel *chan; - - while (dev) { - chan = netdev_priv(dev); - - if (!strcmp(chan->addr, dte)) - break; - dev = chan->slave; - } - return dev; -} - -/* Initiate connection on the logical channel. - * o for PVC we just get channel configuration - * o for SVCs place an X.25 call - * - * Return: 0 connected - * >0 connection in progress - * <0 failure */ -static int cycx_x25_chan_connect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - - if (chan->svc) { - if (!chan->addr[0]) - return -EINVAL; /* no destination address */ - - dprintk(1, KERN_INFO "%s: placing X.25 call to %s...\n", - card->devname, chan->addr); - - if (x25_place_call(card, chan)) - return -EIO; - - cycx_x25_set_chan_state(dev, WAN_CONNECTING); - return 1; - } else - cycx_x25_set_chan_state(dev, WAN_CONNECTED); - - return 0; -} - -/* Disconnect logical channel. - * o if SVC then clear X.25 call */ -static void cycx_x25_chan_disconnect(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) { - x25_clear_call(chan->card, chan->link, chan->lcn, 0, 0); - cycx_x25_set_chan_state(dev, WAN_DISCONNECTING); - } else - cycx_x25_set_chan_state(dev, WAN_DISCONNECTED); -} - -/* Called by kernel timer */ -static void cycx_x25_chan_timer(unsigned long d) -{ - struct net_device *dev = (struct net_device *)d; - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->state == WAN_CONNECTED) - cycx_x25_chan_disconnect(dev); - else - pr_err("%s: %s for svc (%s) not connected!\n", - chan->card->devname, __func__, dev->name); -} - -/* Set logical channel state. */ -static void cycx_x25_set_chan_state(struct net_device *dev, u8 state) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - unsigned long flags; - char *string_state = NULL; - - spin_lock_irqsave(&card->lock, flags); - - if (chan->state != state) { - if (chan->svc && chan->state == WAN_CONNECTED) - del_timer(&chan->timer); - - switch (state) { - case WAN_CONNECTED: - string_state = "connected!"; - *(__be16*)dev->dev_addr = htons(chan->lcn); - netif_wake_queue(dev); - reset_timer(dev); - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_CONNECT); - - break; - case WAN_CONNECTING: - string_state = "connecting..."; - break; - case WAN_DISCONNECTING: - string_state = "disconnecting..."; - break; - case WAN_DISCONNECTED: - string_state = "disconnected!"; - - if (chan->svc) { - *(unsigned short*)dev->dev_addr = 0; - chan->lcn = 0; - } - - if (chan->protocol == ETH_P_X25) - cycx_x25_chan_send_event(dev, - X25_IFACE_DISCONNECT); - - netif_wake_queue(dev); - break; - } - - pr_info("%s: interface %s %s\n", - card->devname, dev->name, string_state); - chan->state = state; - } - - spin_unlock_irqrestore(&card->lock, flags); -} - -/* Send packet on a logical channel. - * When this function is called, tx_skb field of the channel data space - * points to the transmit socket buffer. When transmission is complete, - * release socket buffer and reset 'tbusy' flag. - * - * Return: 0 - transmission complete - * 1 - busy - * - * Notes: - * 1. If packet length is greater than MTU for this channel, we'll fragment - * the packet into 'complete sequence' using M-bit. - * 2. When transmission is complete, an event notification should be issued - * to the router. */ -static int cycx_x25_chan_send(struct net_device *dev, struct sk_buff *skb) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - struct cycx_device *card = chan->card; - int bitm = 0; /* final packet */ - unsigned len = skb->len; - - if (skb->len > card->wandev.mtu) { - len = card->wandev.mtu; - bitm = 0x10; /* set M-bit (more data) */ - } - - if (cycx_x25_send(card, chan->link, chan->lcn, bitm, len, skb->data)) - return 1; - - if (bitm) { - skb_pull(skb, len); - return 1; - } - - ++chan->ifstats.tx_packets; - chan->ifstats.tx_bytes += len; - - return 0; -} - -/* Send event (connection, disconnection, etc) to X.25 socket layer */ - -static void cycx_x25_chan_send_event(struct net_device *dev, u8 event) -{ - struct sk_buff *skb; - unsigned char *ptr; - - if ((skb = dev_alloc_skb(1)) == NULL) { - pr_err("%s: out of memory\n", __func__); - return; - } - - ptr = skb_put(skb, 1); - *ptr = event; - - skb->protocol = x25_type_trans(skb, dev); - netif_rx(skb); -} - -/* Convert line speed in bps to a number used by cyclom 2x code. */ -static u8 bps_to_speed_code(u32 bps) -{ - u8 number = 0; /* defaults to the lowest (1200) speed ;> */ - - if (bps >= 512000) number = 8; - else if (bps >= 256000) number = 7; - else if (bps >= 64000) number = 6; - else if (bps >= 38400) number = 5; - else if (bps >= 19200) number = 4; - else if (bps >= 9600) number = 3; - else if (bps >= 4800) number = 2; - else if (bps >= 2400) number = 1; - - return number; -} - -/* log base 2 */ -static u8 cycx_log2(u32 n) -{ - u8 log = 0; - - if (!n) - return 0; - - while (n > 1) { - n >>= 1; - ++log; - } - - return log; -} - -/* Convert decimal string to unsigned integer. - * If len != 0 then only 'len' characters of the string are converted. */ -static unsigned dec_to_uint(u8 *str, int len) -{ - unsigned val = 0; - - if (!len) - len = strlen(str); - - for (; len && isdigit(*str); ++str, --len) - val = (val * 10) + (*str - (unsigned) '0'); - - return val; -} - -static void reset_timer(struct net_device *dev) -{ - struct cycx_x25_channel *chan = netdev_priv(dev); - - if (chan->svc) - mod_timer(&chan->timer, jiffies+chan->idle_tmout*HZ); -} -#ifdef CYCLOMX_X25_DEBUG -static void cycx_x25_dump_config(struct cycx_x25_config *conf) -{ - pr_info("X.25 configuration\n"); - pr_info("-----------------\n"); - pr_info("link number=%d\n", conf->link); - pr_info("line speed=%d\n", conf->speed); - pr_info("clock=%sternal\n", conf->clock == 8 ? "Ex" : "In"); - pr_info("# level 2 retransm.=%d\n", conf->n2); - pr_info("level 2 window=%d\n", conf->n2win); - pr_info("level 3 window=%d\n", conf->n3win); - pr_info("# logical channels=%d\n", conf->nvc); - pr_info("level 3 pkt len=%d\n", conf->pktlen); - pr_info("my address=%d\n", conf->locaddr); - pr_info("remote address=%d\n", conf->remaddr); - pr_info("t1=%d seconds\n", conf->t1); - pr_info("t2=%d seconds\n", conf->t2); - pr_info("t21=%d seconds\n", conf->t21); - pr_info("# PVCs=%d\n", conf->npvc); - pr_info("t23=%d seconds\n", conf->t23); - pr_info("flags=0x%x\n", conf->flags); -} - -static void cycx_x25_dump_stats(struct cycx_x25_stats *stats) -{ - pr_info("X.25 statistics\n"); - pr_info("--------------\n"); - pr_info("rx_crc_errors=%d\n", stats->rx_crc_errors); - pr_info("rx_over_errors=%d\n", stats->rx_over_errors); - pr_info("n2_tx_frames=%d\n", stats->n2_tx_frames); - pr_info("n2_rx_frames=%d\n", stats->n2_rx_frames); - pr_info("tx_timeouts=%d\n", stats->tx_timeouts); - pr_info("rx_timeouts=%d\n", stats->rx_timeouts); - pr_info("n3_tx_packets=%d\n", stats->n3_tx_packets); - pr_info("n3_rx_packets=%d\n", stats->n3_rx_packets); - pr_info("tx_aborts=%d\n", stats->tx_aborts); - pr_info("rx_aborts=%d\n", stats->rx_aborts); -} - -static void cycx_x25_dump_devs(struct wan_device *wandev) -{ - struct net_device *dev = wandev->dev; - - pr_info("X.25 dev states\n"); - pr_info("name: addr: txoff: protocol:\n"); - pr_info("---------------------------------------\n"); - - while(dev) { - struct cycx_x25_channel *chan = netdev_priv(dev); - - pr_info("%-5.5s %-15.15s %d ETH_P_%s\n", - chan->name, chan->addr, netif_queue_stopped(dev), - chan->protocol == ETH_P_IP ? "IP" : "X25"); - dev = chan->slave; - } -} - -#endif /* CYCLOMX_X25_DEBUG */ -/* End */ diff --git a/include/linux/cyclomx.h b/include/linux/cyclomx.h deleted file mode 100644 index b88f7f428e58c6590b5069127895ea3f85d4685a..0000000000000000000000000000000000000000 --- a/include/linux/cyclomx.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _CYCLOMX_H -#define _CYCLOMX_H -/* -* cyclomx.h Cyclom 2X WAN Link Driver. -* User-level API definitions. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on wanpipe.h by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 2000/07/13 acme remove crap #if KERNEL_VERSION > blah -* 2000/01/21 acme rename cyclomx_open to cyclomx_mod_inc_use_count -* and cyclomx_close to cyclomx_mod_dec_use_count -* 1999/05/19 acme wait_queue_head_t wait_stats(support for 2.3.*) -* 1999/01/03 acme judicious use of data types -* 1998/12/27 acme cleanup: PACKED not needed -* 1998/08/08 acme Version 0.0.1 -*/ - -#include -#include - -#ifdef __KERNEL__ -/* Kernel Interface */ - -#include /* Cyclom 2X support module API definitions */ -#include /* Cyclom 2X firmware module definitions */ -#ifdef CONFIG_CYCLOMX_X25 -#include -#endif - -/* Adapter Data Space. - * This structure is needed because we handle multiple cards, otherwise - * static data would do it. - */ -struct cycx_device { - char devname[WAN_DRVNAME_SZ + 1];/* card name */ - struct cycx_hw hw; /* hardware configuration */ - struct wan_device wandev; /* WAN device data space */ - u32 state_tick; /* link state timestamp */ - spinlock_t lock; - char in_isr; /* interrupt-in-service flag */ - char buff_int_mode_unbusy; /* flag for carrying out dev_tint */ - wait_queue_head_t wait_stats; /* to wait for the STATS indication */ - void __iomem *mbox; /* -> mailbox */ - void (*isr)(struct cycx_device* card); /* interrupt service routine */ - int (*exec)(struct cycx_device* card, void* u_cmd, void* u_data); - union { -#ifdef CONFIG_CYCLOMX_X25 - struct { /* X.25 specific data */ - u32 lo_pvc; - u32 hi_pvc; - u32 lo_svc; - u32 hi_svc; - struct cycx_x25_stats stats; - spinlock_t lock; - u32 connection_keys; - } x; -#endif - } u; -}; - -/* Public Functions */ -void cycx_set_state(struct cycx_device *card, int state); - -#ifdef CONFIG_CYCLOMX_X25 -int cycx_x25_wan_init(struct cycx_device *card, wandev_conf_t *conf); -#endif -#endif /* __KERNEL__ */ -#endif /* _CYCLOMX_H */ diff --git a/include/linux/cycx_drv.h b/include/linux/cycx_drv.h deleted file mode 100644 index 12fe6b0bfcff8e45de8b52b2710543a4a7da7c20..0000000000000000000000000000000000000000 --- a/include/linux/cycx_drv.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -* cycx_drv.h CYCX Support Module. Kernel API Definitions. -* -* Author: Arnaldo Carvalho de Melo -* -* Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo -* -* Based on sdladrv.h by Gene Kozin -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* 1999/10/23 acme cycxhw_t cleanup -* 1999/01/03 acme more judicious use of data types... -* uclong, ucchar, etc deleted, the u8, u16, u32 -* types are the portable way to go. -* 1999/01/03 acme judicious use of data types... u16, u32, etc -* 1998/12/26 acme FIXED_BUFFERS, CONF_OFFSET, -* removal of cy_read{bwl} -* 1998/08/08 acme Initial version. -*/ -#ifndef _CYCX_DRV_H -#define _CYCX_DRV_H - -#define CYCX_WINDOWSIZE 0x4000 /* default dual-port memory window size */ -#define GEN_CYCX_INTR 0x02 -#define RST_ENABLE 0x04 -#define START_CPU 0x06 -#define RST_DISABLE 0x08 -#define FIXED_BUFFERS 0x08 -#define TEST_PATTERN 0xaa55 -#define CMD_OFFSET 0x20 -#define CONF_OFFSET 0x0380 -#define RESET_OFFSET 0x3c00 /* For reset file load */ -#define DATA_OFFSET 0x0100 /* For code and data files load */ -#define START_OFFSET 0x3ff0 /* 80186 starts here */ - -/** - * struct cycx_hw - Adapter hardware configuration - * @fwid - firmware ID - * @irq - interrupt request level - * @dpmbase - dual-port memory base - * @dpmsize - dual-port memory size - * @reserved - reserved for future use - */ -struct cycx_hw { - u32 fwid; - int irq; - void __iomem *dpmbase; - u32 dpmsize; - u32 reserved[5]; -}; - -/* Function Prototypes */ -extern int cycx_setup(struct cycx_hw *hw, void *sfm, u32 len, unsigned long base); -extern int cycx_down(struct cycx_hw *hw); -extern int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len); -extern int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len); -extern int cycx_exec(void __iomem *addr); - -extern void cycx_intr(struct cycx_hw *hw); -#endif /* _CYCX_DRV_H */ diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index cec4b4159767d87bfac6fcb73ba08ac9703eb1fd..8198a63cf459626c0ea44365e8a87be866c9c37a 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -1,129 +1,10 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ +/* + * wanrouter.h Legacy declarations kept around until X25 is removed + */ + #ifndef _ROUTER_H #define _ROUTER_H #include -/****** Kernel Interface ****************************************************/ - -#include /* support for device drivers */ -#include /* proc filesystem pragmatics */ -#include /* support for network drivers */ -#include /* Support for SMP Locking */ - -/*---------------------------------------------------------------------------- - * WAN device data space. - */ -struct wan_device { - unsigned magic; /* magic number */ - char* name; /* -> WAN device name (ASCIIZ) */ - void* private; /* -> driver private data */ - unsigned config_id; /* Configuration ID */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base #1 */ - char S514_cpu_no[1]; /* PCI CPU Number */ - unsigned char S514_slot_no; /* PCI Slot Number */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* max physical transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned enable_tx_int; /* Transmit Interrupt enabled or not */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char signalling; /* Signalling RS232 or V35 */ - char read_mode; /* read mode: Polling or interrupt */ - char new_if_cnt; /* Number of interfaces per wanpipe */ - char del_if_cnt; /* Number of times del_if() gets called */ - unsigned char piggyback; /* Piggibacking a port */ - unsigned hw_opt[4]; /* other hardware options */ - /****** status and statistics *******/ - char state; /* device state */ - char api_status; /* device api status */ - struct net_device_stats stats; /* interface statistics */ - unsigned reserved[16]; /* reserved for future use */ - unsigned long critical; /* critical section flag */ - spinlock_t lock; /* Support for SMP Locking */ - - /****** device management methods ***/ - int (*setup) (struct wan_device *wandev, wandev_conf_t *conf); - int (*shutdown) (struct wan_device *wandev); - int (*update) (struct wan_device *wandev); - int (*ioctl) (struct wan_device *wandev, unsigned cmd, - unsigned long arg); - int (*new_if)(struct wan_device *wandev, struct net_device *dev, - wanif_conf_t *conf); - int (*del_if)(struct wan_device *wandev, struct net_device *dev); - /****** maintained by the router ****/ - struct wan_device* next; /* -> next device */ - struct net_device* dev; /* list of network interfaces */ - unsigned ndev; /* number of interfaces */ - struct proc_dir_entry *dent; /* proc filesystem entry */ -}; - -/* Public functions available for device drivers */ -extern int register_wan_device(struct wan_device *wandev); -extern int unregister_wan_device(char *name); - -/* Proc interface functions. These must not be called by the drivers! */ -extern int wanrouter_proc_init(void); -extern void wanrouter_proc_cleanup(void); -extern int wanrouter_proc_add(struct wan_device *wandev); -extern int wanrouter_proc_delete(struct wan_device *wandev); -extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg); - -/* Public Data */ -/* list of registered devices */ -extern struct wan_device *wanrouter_router_devlist; - #endif /* _ROUTER_H */ diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h index 7617df2833d537514939a44823511b671b37634c..498d6c12c66614a1891a8fa4250c1ae6bfdfdc74 100644 --- a/include/uapi/linux/wanrouter.h +++ b/include/uapi/linux/wanrouter.h @@ -1,363 +1,9 @@ -/***************************************************************************** -* wanrouter.h Definitions for the WAN Multiprotocol Router Module. -* This module provides API and common services for WAN Link -* Drivers and is completely hardware-independent. -* -* Author: Nenad Corbic -* Gideon Hack -* Additions: Arnaldo Melo -* -* Copyright: (c) 1995-2000 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jul 21, 2000 Nenad Corbic Added WAN_FT1_READY State -* Feb 24, 2000 Nenad Corbic Added support for socket based x25api -* Jan 28, 2000 Nenad Corbic Added support for the ASYNC protocol. -* Oct 04, 1999 Nenad Corbic Updated for 2.1.0 release -* Jun 02, 1999 Gideon Hack Added support for the S514 adapter. -* May 23, 1999 Arnaldo Melo Added local_addr to wanif_conf_t -* WAN_DISCONNECTING state added -* Jul 20, 1998 David Fong Added Inverse ARP options to 'wanif_conf_t' -* Jun 12, 1998 David Fong Added Cisco HDLC support. -* Dec 16, 1997 Jaspreet Singh Moved 'enable_IPX' and 'network_number' to -* 'wanif_conf_t' -* Dec 05, 1997 Jaspreet Singh Added 'pap', 'chap' to 'wanif_conf_t' -* Added 'authenticator' to 'wan_ppp_conf_t' -* Nov 06, 1997 Jaspreet Singh Changed Router Driver version to 1.1 from 1.0 -* Oct 20, 1997 Jaspreet Singh Added 'cir','bc','be' and 'mc' to 'wanif_conf_t' -* Added 'enable_IPX' and 'network_number' to -* 'wan_device_t'. Also added defines for -* UDP PACKET TYPE, Interrupt test, critical values -* for RACE conditions. -* Oct 05, 1997 Jaspreet Singh Added 'dlci_num' and 'dlci[100]' to -* 'wan_fr_conf_t' to configure a list of dlci(s) -* for a NODE -* Jul 07, 1997 Jaspreet Singh Added 'ttl' to 'wandev_conf_t' & 'wan_device_t' -* May 29, 1997 Jaspreet Singh Added 'tx_int_enabled' to 'wan_device_t' -* May 21, 1997 Jaspreet Singh Added 'udp_port' to 'wan_device_t' -* Apr 25, 1997 Farhan Thawar Added 'udp_port' to 'wandev_conf_t' -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 02, 1997 Gene Kozin Initial version (based on wanpipe.h). -*****************************************************************************/ - -#ifndef _UAPI_ROUTER_H -#define _UAPI_ROUTER_H - -#define ROUTER_NAME "wanrouter" /* in case we ever change it */ -#define ROUTER_VERSION 1 /* version number */ -#define ROUTER_RELEASE 1 /* release (minor version) number */ -#define ROUTER_IOCTL 'W' /* for IOCTL calls */ -#define ROUTER_MAGIC 0x524D4157L /* signature: 'WANR' reversed */ - -/* IOCTL codes for /proc/router/ entries (up to 255) */ -enum router_ioctls -{ - ROUTER_SETUP = ROUTER_IOCTL<<8, /* configure device */ - ROUTER_DOWN, /* shut down device */ - ROUTER_STAT, /* get device status */ - ROUTER_IFNEW, /* add interface */ - ROUTER_IFDEL, /* delete interface */ - ROUTER_IFSTAT, /* get interface status */ - ROUTER_USER = (ROUTER_IOCTL<<8)+16, /* driver-specific calls */ - ROUTER_USER_MAX = (ROUTER_IOCTL<<8)+31 -}; - -/* identifiers for displaying proc file data for dual port adapters */ -#define PROC_DATA_PORT_0 0x8000 /* the data is for port 0 */ -#define PROC_DATA_PORT_1 0x8001 /* the data is for port 1 */ - -/* NLPID for packet encapsulation (ISO/IEC TR 9577) */ -#define NLPID_IP 0xCC /* Internet Protocol Datagram */ -#define NLPID_SNAP 0x80 /* IEEE Subnetwork Access Protocol */ -#define NLPID_CLNP 0x81 /* ISO/IEC 8473 */ -#define NLPID_ESIS 0x82 /* ISO/IEC 9542 */ -#define NLPID_ISIS 0x83 /* ISO/IEC ISIS */ -#define NLPID_Q933 0x08 /* CCITT Q.933 */ - -/* Miscellaneous */ -#define WAN_IFNAME_SZ 15 /* max length of the interface name */ -#define WAN_DRVNAME_SZ 15 /* max length of the link driver name */ -#define WAN_ADDRESS_SZ 31 /* max length of the WAN media address */ -#define USED_BY_FIELD 8 /* max length of the used by field */ - -/* Defines for UDP PACKET TYPE */ -#define UDP_PTPIPE_TYPE 0x01 -#define UDP_FPIPE_TYPE 0x02 -#define UDP_CPIPE_TYPE 0x03 -#define UDP_DRVSTATS_TYPE 0x04 -#define UDP_INVALID_TYPE 0x05 - -/* Command return code */ -#define CMD_OK 0 /* normal firmware return code */ -#define CMD_TIMEOUT 0xFF /* firmware command timed out */ - -/* UDP Packet Management */ -#define UDP_PKT_FRM_STACK 0x00 -#define UDP_PKT_FRM_NETWORK 0x01 - -/* Maximum interrupt test counter */ -#define MAX_INTR_TEST_COUNTER 100 - -/* Critical Values for RACE conditions*/ -#define CRITICAL_IN_ISR 0xA1 -#define CRITICAL_INTR_HANDLED 0xB1 - -/****** Data Types **********************************************************/ - -/*---------------------------------------------------------------------------- - * X.25-specific link-level configuration. - */ -typedef struct wan_x25_conf -{ - unsigned lo_pvc; /* lowest permanent circuit number */ - unsigned hi_pvc; /* highest permanent circuit number */ - unsigned lo_svc; /* lowest switched circuit number */ - unsigned hi_svc; /* highest switched circuit number */ - unsigned hdlc_window; /* HDLC window size (1..7) */ - unsigned pkt_window; /* X.25 packet window size (1..7) */ - unsigned t1; /* HDLC timer T1, sec (1..30) */ - unsigned t2; /* HDLC timer T2, sec (0..29) */ - unsigned t4; /* HDLC supervisory frame timer = T4 * T1 */ - unsigned n2; /* HDLC retransmission limit (1..30) */ - unsigned t10_t20; /* X.25 RESTART timeout, sec (1..255) */ - unsigned t11_t21; /* X.25 CALL timeout, sec (1..255) */ - unsigned t12_t22; /* X.25 RESET timeout, sec (1..255) */ - unsigned t13_t23; /* X.25 CLEAR timeout, sec (1..255) */ - unsigned t16_t26; /* X.25 INTERRUPT timeout, sec (1..255) */ - unsigned t28; /* X.25 REGISTRATION timeout, sec (1..255) */ - unsigned r10_r20; /* RESTART retransmission limit (0..250) */ - unsigned r12_r22; /* RESET retransmission limit (0..250) */ - unsigned r13_r23; /* CLEAR retransmission limit (0..250) */ - unsigned ccitt_compat; /* compatibility mode: 1988/1984/1980 */ - unsigned x25_conf_opt; /* User defined x25 config optoins */ - unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */ - unsigned char logging; /* Control connection logging */ - unsigned char oob_on_modem; /* Whether to send modem status to the user app */ -} wan_x25_conf_t; - -/*---------------------------------------------------------------------------- - * Frame relay specific link-level configuration. - */ -typedef struct wan_fr_conf -{ - unsigned signalling; /* local in-channel signalling type */ - unsigned t391; /* link integrity verification timer */ - unsigned t392; /* polling verification timer */ - unsigned n391; /* full status polling cycle counter */ - unsigned n392; /* error threshold counter */ - unsigned n393; /* monitored events counter */ - unsigned dlci_num; /* number of DLCs (access node) */ - unsigned dlci[100]; /* List of all DLCIs */ -} wan_fr_conf_t; - -/*---------------------------------------------------------------------------- - * PPP-specific link-level configuration. - */ -typedef struct wan_ppp_conf -{ - unsigned restart_tmr; /* restart timer */ - unsigned auth_rsrt_tmr; /* authentication timer */ - unsigned auth_wait_tmr; /* authentication timer */ - unsigned mdm_fail_tmr; /* modem failure timer */ - unsigned dtr_drop_tmr; /* DTR drop timer */ - unsigned connect_tmout; /* connection timeout */ - unsigned conf_retry; /* max. retry */ - unsigned term_retry; /* max. retry */ - unsigned fail_retry; /* max. retry */ - unsigned auth_retry; /* max. retry */ - unsigned auth_options; /* authentication opt. */ - unsigned ip_options; /* IP options */ - char authenticator; /* AUTHENTICATOR or not */ - char ip_mode; /* Static/Host/Peer */ -} wan_ppp_conf_t; - -/*---------------------------------------------------------------------------- - * CHDLC-specific link-level configuration. - */ -typedef struct wan_chdlc_conf -{ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* hdlc_streaming mode (Y/N) */ - unsigned char receive_only; /* no transmit buffering (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ -} wan_chdlc_conf_t; - - -/*---------------------------------------------------------------------------- - * WAN device configuration. Passed to ROUTER_SETUP IOCTL. - */ -typedef struct wandev_conf -{ - unsigned magic; /* magic number (for verification) */ - unsigned config_id; /* configuration structure identifier */ - /****** hardware configuration ******/ - unsigned ioport; /* adapter I/O port base */ - unsigned long maddr; /* dual-port memory address */ - unsigned msize; /* dual-port memory size */ - int irq; /* interrupt request level */ - int dma; /* DMA request level */ - char S514_CPU_no[1]; /* S514 PCI adapter CPU number ('A' or 'B') */ - unsigned PCI_slot_no; /* S514 PCI adapter slot number */ - char auto_pci_cfg; /* S515 PCI automatic slot detection */ - char comm_port; /* Communication Port (PRI=0, SEC=1) */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned udp_port; /* UDP port for management */ - unsigned char ttl; /* Time To Live for UDP security */ - unsigned char ft1; /* FT1 Configurator Option */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - char line_coding; /* NRZ/NRZI/FM0/FM1, etc. */ - char station; /* DTE/DCE, primary/secondary, etc. */ - char connection; /* permanent/switched/on-demand */ - char read_mode; /* read mode: Polling or interrupt */ - char receive_only; /* disable tx buffers */ - char tty; /* Create a fake tty device */ - unsigned tty_major; /* Major number for wanpipe tty device */ - unsigned tty_minor; /* Minor number for wanpipe tty device */ - unsigned tty_mode; /* TTY operation mode SYNC or ASYNC */ - char backup; /* Backup Mode */ - unsigned hw_opt[4]; /* other hardware options */ - unsigned reserved[4]; - /****** arbitrary data ***************/ - unsigned data_size; /* data buffer size */ - void* data; /* data buffer, e.g. firmware */ - union /****** protocol-specific ************/ - { - wan_x25_conf_t x25; /* X.25 configuration */ - wan_ppp_conf_t ppp; /* PPP configuration */ - wan_fr_conf_t fr; /* frame relay configuration */ - wan_chdlc_conf_t chdlc; /* Cisco HDLC configuration */ - } u; -} wandev_conf_t; - -/* 'config_id' definitions */ -#define WANCONFIG_X25 101 /* X.25 link */ -#define WANCONFIG_FR 102 /* frame relay link */ -#define WANCONFIG_PPP 103 /* synchronous PPP link */ -#define WANCONFIG_CHDLC 104 /* Cisco HDLC Link */ -#define WANCONFIG_BSC 105 /* BiSync Streaming */ -#define WANCONFIG_HDLC 106 /* HDLC Support */ -#define WANCONFIG_MPPP 107 /* Multi Port PPP over RAW CHDLC */ - /* - * Configuration options defines. + * wanrouter.h Legacy declarations kept around until X25 is removed */ -/* general options */ -#define WANOPT_OFF 0 -#define WANOPT_ON 1 -#define WANOPT_NO 0 -#define WANOPT_YES 1 - -/* intercace options */ -#define WANOPT_RS232 0 -#define WANOPT_V35 1 - -/* data encoding options */ -#define WANOPT_NRZ 0 -#define WANOPT_NRZI 1 -#define WANOPT_FM0 2 -#define WANOPT_FM1 3 - -/* link type options */ -#define WANOPT_POINTTOPOINT 0 /* RTS always active */ -#define WANOPT_MULTIDROP 1 /* RTS is active when transmitting */ - -/* clocking options */ -#define WANOPT_EXTERNAL 0 -#define WANOPT_INTERNAL 1 - -/* station options */ -#define WANOPT_DTE 0 -#define WANOPT_DCE 1 -#define WANOPT_CPE 0 -#define WANOPT_NODE 1 -#define WANOPT_SECONDARY 0 -#define WANOPT_PRIMARY 1 - -/* connection options */ -#define WANOPT_PERMANENT 0 /* DTR always active */ -#define WANOPT_SWITCHED 1 /* use DTR to setup link (dial-up) */ -#define WANOPT_ONDEMAND 2 /* activate DTR only before sending */ - -/* frame relay in-channel signalling */ -#define WANOPT_FR_ANSI 1 /* ANSI T1.617 Annex D */ -#define WANOPT_FR_Q933 2 /* ITU Q.933A */ -#define WANOPT_FR_LMI 3 /* LMI */ - -/* PPP IP Mode Options */ -#define WANOPT_PPP_STATIC 0 -#define WANOPT_PPP_HOST 1 -#define WANOPT_PPP_PEER 2 - -/* ASY Mode Options */ -#define WANOPT_ONE 1 -#define WANOPT_TWO 2 -#define WANOPT_ONE_AND_HALF 3 - -#define WANOPT_NONE 0 -#define WANOPT_ODD 1 -#define WANOPT_EVEN 2 - -/* CHDLC Protocol Options */ -/* DF Commented out for now. - -#define WANOPT_CHDLC_NO_DCD IGNORE_DCD_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_CTS IGNORE_CTS_FOR_LINK_STAT -#define WANOPT_CHDLC_NO_KEEPALIVE IGNORE_KPALV_FOR_LINK_STAT -*/ - -/* Port options */ -#define WANOPT_PRI 0 -#define WANOPT_SEC 1 -/* read mode */ -#define WANOPT_INTR 0 -#define WANOPT_POLL 1 - -#define WANOPT_TTY_SYNC 0 -#define WANOPT_TTY_ASYNC 1 -/*---------------------------------------------------------------------------- - * WAN Link Status Info (for ROUTER_STAT IOCTL). - */ -typedef struct wandev_stat -{ - unsigned state; /* link state */ - unsigned ndev; /* number of configured interfaces */ - - /* link/interface configuration */ - unsigned connection; /* permanent/switched/on-demand */ - unsigned media_type; /* Frame relay/PPP/X.25/SDLC, etc. */ - unsigned mtu; /* max. transmit unit for this device */ - - /* physical level statistics */ - unsigned modem_status; /* modem status */ - unsigned rx_frames; /* received frames count */ - unsigned rx_overruns; /* receiver overrun error count */ - unsigned rx_crc_err; /* receive CRC error count */ - unsigned rx_aborts; /* received aborted frames count */ - unsigned rx_bad_length; /* unexpetedly long/short frames count */ - unsigned rx_dropped; /* frames discarded at device level */ - unsigned tx_frames; /* transmitted frames count */ - unsigned tx_underruns; /* aborted transmissions (underruns) count */ - unsigned tx_timeouts; /* transmission timeouts */ - unsigned tx_rejects; /* other transmit errors */ - - /* media level statistics */ - unsigned rx_bad_format; /* frames with invalid format */ - unsigned rx_bad_addr; /* frames with invalid media address */ - unsigned tx_retries; /* frames re-transmitted */ - unsigned reserved[16]; /* reserved for future use */ -} wandev_stat_t; +#ifndef _UAPI_ROUTER_H +#define _UAPI_ROUTER_H /* 'state' defines */ enum wan_states @@ -365,88 +11,7 @@ enum wan_states WAN_UNCONFIGURED, /* link/channel is not configured */ WAN_DISCONNECTED, /* link/channel is disconnected */ WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED, /* link/channel is operational */ - WAN_LIMIT, /* for verification only */ - WAN_DUALPORT, /* for Dual Port cards */ - WAN_DISCONNECTING, - WAN_FT1_READY /* FT1 Configurator Ready */ + WAN_CONNECTED /* link/channel is operational */ }; -enum { - WAN_LOCAL_IP, - WAN_POINTOPOINT_IP, - WAN_NETMASK_IP, - WAN_BROADCAST_IP -}; - -/* 'modem_status' masks */ -#define WAN_MODEM_CTS 0x0001 /* CTS line active */ -#define WAN_MODEM_DCD 0x0002 /* DCD line active */ -#define WAN_MODEM_DTR 0x0010 /* DTR line active */ -#define WAN_MODEM_RTS 0x0020 /* RTS line active */ - -/*---------------------------------------------------------------------------- - * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL). - */ -typedef struct wanif_conf -{ - unsigned magic; /* magic number */ - unsigned config_id; /* configuration identifier */ - char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ - char addr[WAN_ADDRESS_SZ+1]; /* media address, ASCIIZ */ - char usedby[USED_BY_FIELD]; /* used by API or WANPIPE */ - unsigned idle_timeout; /* sec, before disconnecting */ - unsigned hold_timeout; /* sec, before re-connecting */ - unsigned cir; /* Committed Information Rate fwd,bwd*/ - unsigned bc; /* Committed Burst Size fwd, bwd */ - unsigned be; /* Excess Burst Size fwd, bwd */ - unsigned char enable_IPX; /* Enable or Disable IPX */ - unsigned char inarp; /* Send Inverse ARP requests Y/N */ - unsigned inarp_interval; /* sec, between InARP requests */ - unsigned long network_number; /* Network Number for IPX */ - char mc; /* Multicast on or off */ - char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */ - unsigned char port; /* board port */ - unsigned char protocol; /* prococol used in this channel (TCPOX25 or X25) */ - char pap; /* PAP enabled or disabled */ - char chap; /* CHAP enabled or disabled */ - unsigned char userid[511]; /* List of User Id */ - unsigned char passwd[511]; /* List of passwords */ - unsigned char sysname[31]; /* Name of the system */ - unsigned char ignore_dcd; /* Protocol options: */ - unsigned char ignore_cts; /* Ignore these to determine */ - unsigned char ignore_keepalive; /* link status (Yes or No) */ - unsigned char hdlc_streaming; /* Hdlc streaming mode (Y/N) */ - unsigned keepalive_tx_tmr; /* transmit keepalive timer */ - unsigned keepalive_rx_tmr; /* receive keepalive timer */ - unsigned keepalive_err_margin; /* keepalive_error_tolerance */ - unsigned slarp_timer; /* SLARP request timer */ - unsigned char ttl; /* Time To Live for UDP security */ - char interface; /* RS-232/V.35, etc. */ - char clocking; /* external/internal */ - unsigned bps; /* data transfer rate */ - unsigned mtu; /* maximum transmit unit size */ - unsigned char if_down; /* brind down interface when disconnected */ - unsigned char gateway; /* Is this interface a gateway */ - unsigned char true_if_encoding; /* Set the dev->type to true board protocol */ - - unsigned char asy_data_trans; /* async API options */ - unsigned char rts_hs_for_receive; /* async Protocol options */ - unsigned char xon_xoff_hs_for_receive; - unsigned char xon_xoff_hs_for_transmit; - unsigned char dcd_hs_for_transmit; - unsigned char cts_hs_for_transmit; - unsigned char async_mode; - unsigned tx_bits_per_char; - unsigned rx_bits_per_char; - unsigned stop_bits; - unsigned char parity; - unsigned break_timer; - unsigned inter_char_timer; - unsigned rx_complete_length; - unsigned xon_char; - unsigned xoff_char; - unsigned char receive_only; /* no transmit buffering (Y/N) */ -} wanif_conf_t; - #endif /* _UAPI_ROUTER_H */ diff --git a/net/wanrouter/Kconfig b/net/wanrouter/Kconfig deleted file mode 100644 index a157a2e64e18de17e33ae1c515e5b1501553b256..0000000000000000000000000000000000000000 --- a/net/wanrouter/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -# -# Configuration for WAN router -# - -config WAN_ROUTER - tristate "WAN router (DEPRECATED)" - depends on EXPERIMENTAL - ---help--- - Wide Area Networks (WANs), such as X.25, frame relay and leased - lines, are used to interconnect Local Area Networks (LANs) over vast - distances with data transfer rates significantly higher than those - achievable with commonly used asynchronous modem connections. - Usually, a quite expensive external device called a `WAN router' is - needed to connect to a WAN. - - As an alternative, WAN routing can be built into the Linux kernel. - With relatively inexpensive WAN interface cards available on the - market, a perfectly usable router can be built for less than half - the price of an external router. If you have one of those cards and - wish to use your Linux box as a WAN router, say Y here and also to - the WAN driver for your card, below. You will then need the - wan-tools package which is available from . - - To compile WAN routing support as a module, choose M here: the - module will be called wanrouter. - - If unsure, say N. diff --git a/net/wanrouter/Makefile b/net/wanrouter/Makefile deleted file mode 100644 index 4da14bc480787bbc6305fadcae9a4f28a0febfa3..0000000000000000000000000000000000000000 --- a/net/wanrouter/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the Linux WAN router layer. -# - -obj-$(CONFIG_WAN_ROUTER) += wanrouter.o - -wanrouter-y := wanproc.o wanmain.o diff --git a/net/wanrouter/patchlevel b/net/wanrouter/patchlevel deleted file mode 100644 index c043eea7767eecb5567ebcbe8d671e45ef2833a8..0000000000000000000000000000000000000000 --- a/net/wanrouter/patchlevel +++ /dev/null @@ -1 +0,0 @@ -2.2.1 diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c deleted file mode 100644 index 2ab785064b7e36da5d0871f2abfd57b5a92f09ee..0000000000000000000000000000000000000000 --- a/net/wanrouter/wanmain.c +++ /dev/null @@ -1,782 +0,0 @@ -/***************************************************************************** -* wanmain.c WAN Multiprotocol Router Module. Main code. -* -* This module is completely hardware-independent and provides -* the following common services for the WAN Link Drivers: -* o WAN device management (registering, unregistering) -* o Network interface management -* o Physical connection management (dial-up, incoming calls) -* o Logical connection management (switched virtual circuits) -* o Protocol encapsulation/decapsulation -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Nov 24, 2000 Nenad Corbic Updated for 2.4.X kernels -* Nov 07, 2000 Nenad Corbic Fixed the Mulit-Port PPP for kernels 2.2.16 and -* greater. -* Aug 2, 2000 Nenad Corbic Block the Multi-Port PPP from running on -* kernels 2.2.16 or greater. The SyncPPP -* has changed. -* Jul 13, 2000 Nenad Corbic Added SyncPPP support -* Added extra debugging in device_setup(). -* Oct 01, 1999 Gideon Hack Update for s514 PCI card -* Dec 27, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -* Jan 16, 1997 Gene Kozin router_devlist made public -* Jan 31, 1997 Alan Cox Hacked it about a bit for 2.1 -* Jun 27, 1997 Alan Cox realigned with vendor code -* Oct 15, 1997 Farhan Thawar changed wan_encapsulate to add a pad byte of 0 -* Apr 20, 1998 Alan Cox Fixed 2.1 symbols -* May 17, 1998 K. Baranowski Fixed SNAP encapsulation in wan_encapsulate -* Dec 15, 1998 Arnaldo Melo support for firmwares of up to 128000 bytes -* check wandev->setup return value -* Dec 22, 1998 Arnaldo Melo vmalloc/vfree used in device_setup to allocate -* kernel memory and copy configuration data to -* kernel space (for big firmwares) -* Jun 02, 1999 Gideon Hack Updates for Linux 2.0.X and 2.2.X kernels. -*****************************************************************************/ - -#include /* offsetof(), etc. */ -#include -#include /* return codes */ -#include -#include /* support for loadable modules */ -#include /* kmalloc(), kfree() */ -#include -#include -#include /* inline mem*, str* functions */ - -#include /* htons(), etc. */ -#include /* WAN router API definitions */ - -#include /* vmalloc, vfree */ -#include /* copy_to/from_user */ -#include /* __initfunc et al. */ - -#define DEV_TO_SLAVE(dev) (*((struct net_device **)netdev_priv(dev))) - -/* - * Function Prototypes - */ - -/* - * WAN device IOCTL handlers - */ - -static DEFINE_MUTEX(wanrouter_mutex); -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf); -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat); -static int wanrouter_device_shutdown(struct wan_device *wandev); -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf); -static int wanrouter_device_del_if(struct wan_device *wandev, - char __user *u_name); - -/* - * Miscellaneous - */ - -static struct wan_device *wanrouter_find_device(char *name); -static int wanrouter_delete_interface(struct wan_device *wandev, char *name); -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock); -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock); - - - -/* - * Global Data - */ - -static char wanrouter_fullname[] = "Sangoma WANPIPE Router"; -static char wanrouter_copyright[] = "(c) 1995-2000 Sangoma Technologies Inc."; -static char wanrouter_modname[] = ROUTER_NAME; /* short module name */ -struct wan_device* wanrouter_router_devlist; /* list of registered devices */ - -/* - * Organize Unique Identifiers for encapsulation/decapsulation - */ - -#if 0 -static unsigned char wanrouter_oui_ether[] = { 0x00, 0x00, 0x00 }; -static unsigned char wanrouter_oui_802_2[] = { 0x00, 0x80, 0xC2 }; -#endif - -static int __init wanrouter_init(void) -{ - int err; - - printk(KERN_INFO "%s v%u.%u %s\n", - wanrouter_fullname, ROUTER_VERSION, ROUTER_RELEASE, - wanrouter_copyright); - - err = wanrouter_proc_init(); - if (err) - printk(KERN_INFO "%s: can't create entry in proc filesystem!\n", - wanrouter_modname); - - return err; -} - -static void __exit wanrouter_cleanup (void) -{ - wanrouter_proc_cleanup(); -} - -/* - * This is just plain dumb. We should move the bugger to drivers/net/wan, - * slap it first in directory and make it module_init(). The only reason - * for subsys_initcall() here is that net goes after drivers (why, BTW?) - */ -subsys_initcall(wanrouter_init); -module_exit(wanrouter_cleanup); - -/* - * Kernel APIs - */ - -/* - * Register WAN device. - * o verify device credentials - * o create an entry for the device in the /proc/net/router directory - * o initialize internally maintained fields of the wan_device structure - * o link device data space to a singly-linked list - * o if it's the first device, then start kernel 'thread' - * o increment module use count - * - * Return: - * 0 Ok - * < 0 error. - * - * Context: process - */ - - -int register_wan_device(struct wan_device *wandev) -{ - int err, namelen; - - if ((wandev == NULL) || (wandev->magic != ROUTER_MAGIC) || - (wandev->name == NULL)) - return -EINVAL; - - namelen = strlen(wandev->name); - if (!namelen || (namelen > WAN_DRVNAME_SZ)) - return -EINVAL; - - if (wanrouter_find_device(wandev->name)) - return -EEXIST; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering WAN device %s\n", - wanrouter_modname, wandev->name); -#endif - - /* - * Register /proc directory entry - */ - err = wanrouter_proc_add(wandev); - if (err) { - printk(KERN_INFO - "%s: can't create /proc/net/router/%s entry!\n", - wanrouter_modname, wandev->name); - return err; - } - - /* - * Initialize fields of the wan_device structure maintained by the - * router and update local data. - */ - - wandev->ndev = 0; - wandev->dev = NULL; - wandev->next = wanrouter_router_devlist; - wanrouter_router_devlist = wandev; - return 0; -} - -/* - * Unregister WAN device. - * o shut down device - * o unlink device data space from the linked list - * o delete device entry in the /proc/net/router directory - * o decrement module use count - * - * Return: 0 Ok - * <0 error. - * Context: process - */ - - -int unregister_wan_device(char *name) -{ - struct wan_device *wandev, *prev; - - if (name == NULL) - return -EINVAL; - - for (wandev = wanrouter_router_devlist, prev = NULL; - wandev && strcmp(wandev->name, name); - prev = wandev, wandev = wandev->next) - ; - if (wandev == NULL) - return -ENODEV; - -#ifdef WANDEBUG - printk(KERN_INFO "%s: unregistering WAN device %s\n", - wanrouter_modname, name); -#endif - - if (wandev->state != WAN_UNCONFIGURED) - wanrouter_device_shutdown(wandev); - - if (prev) - prev->next = wandev->next; - else - wanrouter_router_devlist = wandev->next; - - wanrouter_proc_delete(wandev); - return 0; -} - -#if 0 - -/* - * Encapsulate packet. - * - * Return: encapsulation header size - * < 0 - unsupported Ethertype - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -int wanrouter_encapsulate(struct sk_buff *skb, struct net_device *dev, - unsigned short type) -{ - int hdr_len = 0; - - switch (type) { - case ETH_P_IP: /* IP datagram encapsulation */ - hdr_len += 1; - skb_push(skb, 1); - skb->data[0] = NLPID_IP; - break; - - case ETH_P_IPX: /* SNAP encapsulation */ - case ETH_P_ARP: - hdr_len += 7; - skb_push(skb, 7); - skb->data[0] = 0; - skb->data[1] = NLPID_SNAP; - skb_copy_to_linear_data_offset(skb, 2, wanrouter_oui_ether, - sizeof(wanrouter_oui_ether)); - *((unsigned short*)&skb->data[5]) = htons(type); - break; - - default: /* Unknown packet type */ - printk(KERN_INFO - "%s: unsupported Ethertype 0x%04X on interface %s!\n", - wanrouter_modname, type, dev->name); - hdr_len = -EINVAL; - } - return hdr_len; -} - - -/* - * Decapsulate packet. - * - * Return: Ethertype (in network order) - * 0 unknown encapsulation - * - * Notes: - * 1. This function may be called on interrupt context. - */ - - -__be16 wanrouter_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - int cnt = skb->data[0] ? 0 : 1; /* there may be a pad present */ - __be16 ethertype; - - switch (skb->data[cnt]) { - case NLPID_IP: /* IP datagramm */ - ethertype = htons(ETH_P_IP); - cnt += 1; - break; - - case NLPID_SNAP: /* SNAP encapsulation */ - if (memcmp(&skb->data[cnt + 1], wanrouter_oui_ether, - sizeof(wanrouter_oui_ether))){ - printk(KERN_INFO - "%s: unsupported SNAP OUI %02X-%02X-%02X " - "on interface %s!\n", wanrouter_modname, - skb->data[cnt+1], skb->data[cnt+2], - skb->data[cnt+3], dev->name); - return 0; - } - ethertype = *((__be16*)&skb->data[cnt+4]); - cnt += 6; - break; - - /* add other protocols, e.g. CLNP, ESIS, ISIS, if needed */ - - default: - printk(KERN_INFO - "%s: unsupported NLPID 0x%02X on interface %s!\n", - wanrouter_modname, skb->data[cnt], dev->name); - return 0; - } - skb->protocol = ethertype; - skb->pkt_type = PACKET_HOST; /* Physically point to point */ - skb_pull(skb, cnt); - skb_reset_mac_header(skb); - return ethertype; -} - -#endif /* 0 */ - -/* - * WAN device IOCTL. - * o find WAN device associated with this node - * o execute requested action or pass command to the device driver - */ - -long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - struct inode *inode = file->f_path.dentry->d_inode; - int err = 0; - struct proc_dir_entry *dent; - struct wan_device *wandev; - void __user *data = (void __user *)arg; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if ((cmd >> 8) != ROUTER_IOCTL) - return -EINVAL; - - dent = PDE(inode); - if ((dent == NULL) || (dent->data == NULL)) - return -EINVAL; - - wandev = dent->data; - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - mutex_lock(&wanrouter_mutex); - switch (cmd) { - case ROUTER_SETUP: - err = wanrouter_device_setup(wandev, data); - break; - - case ROUTER_DOWN: - err = wanrouter_device_shutdown(wandev); - break; - - case ROUTER_STAT: - err = wanrouter_device_stat(wandev, data); - break; - - case ROUTER_IFNEW: - err = wanrouter_device_new_if(wandev, data); - break; - - case ROUTER_IFDEL: - err = wanrouter_device_del_if(wandev, data); - break; - - case ROUTER_IFSTAT: - break; - - default: - if ((cmd >= ROUTER_USER) && - (cmd <= ROUTER_USER_MAX) && - wandev->ioctl) - err = wandev->ioctl(wandev, cmd, arg); - else err = -EINVAL; - } - mutex_unlock(&wanrouter_mutex); - return err; -} - -/* - * WAN Driver IOCTL Handlers - */ - -/* - * Setup WAN link device. - * o verify user address space - * o allocate kernel memory and copy configuration data to kernel space - * o if configuration data includes extension, copy it to kernel space too - * o call driver's setup() entry point - */ - -static int wanrouter_device_setup(struct wan_device *wandev, - wandev_conf_t __user *u_conf) -{ - void *data = NULL; - wandev_conf_t *conf; - int err = -EINVAL; - - if (wandev->setup == NULL) { /* Nothing to do ? */ - printk(KERN_INFO "%s: ERROR, No setup script: wandev->setup()\n", - wandev->name); - return 0; - } - - conf = kmalloc(sizeof(wandev_conf_t), GFP_KERNEL); - if (conf == NULL){ - printk(KERN_INFO "%s: ERROR, Failed to allocate kernel memory !\n", - wandev->name); - return -ENOBUFS; - } - - if (copy_from_user(conf, u_conf, sizeof(wandev_conf_t))) { - printk(KERN_INFO "%s: Failed to copy user config data to kernel space!\n", - wandev->name); - kfree(conf); - return -EFAULT; - } - - if (conf->magic != ROUTER_MAGIC) { - kfree(conf); - printk(KERN_INFO "%s: ERROR, Invalid MAGIC Number\n", - wandev->name); - return -EINVAL; - } - - if (conf->data_size && conf->data) { - if (conf->data_size > 128000) { - printk(KERN_INFO - "%s: ERROR, Invalid firmware data size %i !\n", - wandev->name, conf->data_size); - kfree(conf); - return -EINVAL; - } - - data = vmalloc(conf->data_size); - if (!data) { - printk(KERN_INFO - "%s: ERROR, Failed allocate kernel memory !\n", - wandev->name); - kfree(conf); - return -ENOBUFS; - } - if (!copy_from_user(data, conf->data, conf->data_size)) { - conf->data = data; - err = wandev->setup(wandev, conf); - } else { - printk(KERN_INFO - "%s: ERROR, Failed to copy from user data !\n", - wandev->name); - err = -EFAULT; - } - vfree(data); - } else { - printk(KERN_INFO - "%s: ERROR, No firmware found ! Firmware size = %i !\n", - wandev->name, conf->data_size); - } - - kfree(conf); - return err; -} - -/* - * Shutdown WAN device. - * o delete all not opened logical channels for this device - * o call driver's shutdown() entry point - */ - -static int wanrouter_device_shutdown(struct wan_device *wandev) -{ - struct net_device *dev; - int err=0; - - if (wandev->state == WAN_UNCONFIGURED) - return 0; - - printk(KERN_INFO "\n%s: Shutting Down!\n",wandev->name); - - for (dev = wandev->dev; dev;) { - err = wanrouter_delete_interface(wandev, dev->name); - if (err) - return err; - /* The above function deallocates the current dev - * structure. Therefore, we cannot use netdev_priv(dev) - * as the next element: wandev->dev points to the - * next element */ - dev = wandev->dev; - } - - if (wandev->ndev) - return -EBUSY; /* there are opened interfaces */ - - if (wandev->shutdown) - err=wandev->shutdown(wandev); - - return err; -} - -/* - * Get WAN device status & statistics. - */ - -static int wanrouter_device_stat(struct wan_device *wandev, - wandev_stat_t __user *u_stat) -{ - wandev_stat_t stat; - - memset(&stat, 0, sizeof(stat)); - - /* Ask device driver to update device statistics */ - if ((wandev->state != WAN_UNCONFIGURED) && wandev->update) - wandev->update(wandev); - - /* Fill out structure */ - stat.ndev = wandev->ndev; - stat.state = wandev->state; - - if (copy_to_user(u_stat, &stat, sizeof(stat))) - return -EFAULT; - - return 0; -} - -/* - * Create new WAN interface. - * o verify user address space - * o copy configuration data to kernel address space - * o allocate network interface data space - * o call driver's new_if() entry point - * o make sure there is no interface name conflict - * o register network interface - */ - -static int wanrouter_device_new_if(struct wan_device *wandev, - wanif_conf_t __user *u_conf) -{ - wanif_conf_t *cnf; - struct net_device *dev = NULL; - int err; - - if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) - return -ENODEV; - - cnf = kmalloc(sizeof(wanif_conf_t), GFP_KERNEL); - if (!cnf) - return -ENOBUFS; - - err = -EFAULT; - if (copy_from_user(cnf, u_conf, sizeof(wanif_conf_t))) - goto out; - - err = -EINVAL; - if (cnf->magic != ROUTER_MAGIC) - goto out; - - if (cnf->config_id == WANCONFIG_MPPP) { - printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", - wandev->name); - err = -EPROTONOSUPPORT; - goto out; - } else { - err = wandev->new_if(wandev, dev, cnf); - } - - if (!err) { - /* Register network interface. This will invoke init() - * function supplied by the driver. If device registered - * successfully, add it to the interface list. - */ - -#ifdef WANDEBUG - printk(KERN_INFO "%s: registering interface %s...\n", - wanrouter_modname, dev->name); -#endif - - err = register_netdev(dev); - if (!err) { - struct net_device *slave = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - - if (wandev->dev == NULL) { - wandev->dev = dev; - } else { - for (slave=wandev->dev; - DEV_TO_SLAVE(slave); - slave = DEV_TO_SLAVE(slave)) - DEV_TO_SLAVE(slave) = dev; - } - ++wandev->ndev; - - unlock_adapter_irq(&wandev->lock, &smp_flags); - err = 0; /* done !!! */ - goto out; - } - if (wandev->del_if) - wandev->del_if(wandev, dev); - free_netdev(dev); - } - -out: - kfree(cnf); - return err; -} - - -/* - * Delete WAN logical channel. - * o verify user address space - * o copy configuration data to kernel address space - */ - -static int wanrouter_device_del_if(struct wan_device *wandev, char __user *u_name) -{ - char name[WAN_IFNAME_SZ + 1]; - int err = 0; - - if (wandev->state == WAN_UNCONFIGURED) - return -ENODEV; - - memset(name, 0, sizeof(name)); - - if (copy_from_user(name, u_name, WAN_IFNAME_SZ)) - return -EFAULT; - - err = wanrouter_delete_interface(wandev, name); - if (err) - return err; - - /* If last interface being deleted, shutdown card - * This helps with administration at leaf nodes - * (You can tell if the person at the other end of the phone - * has an interface configured) and avoids DoS vulnerabilities - * in binary driver files - this fixes a problem with the current - * Sangoma driver going into strange states when all the network - * interfaces are deleted and the link irrecoverably disconnected. - */ - - if (!wandev->ndev && wandev->shutdown) - err = wandev->shutdown(wandev); - - return err; -} - -/* - * Miscellaneous Functions - */ - -/* - * Find WAN device by name. - * Return pointer to the WAN device data space or NULL if device not found. - */ - -static struct wan_device *wanrouter_find_device(char *name) -{ - struct wan_device *wandev; - - for (wandev = wanrouter_router_devlist; - wandev && strcmp(wandev->name, name); - wandev = wandev->next); - return wandev; -} - -/* - * Delete WAN logical channel identified by its name. - * o find logical channel by its name - * o call driver's del_if() entry point - * o unregister network interface - * o unlink channel data space from linked list of channels - * o release channel data space - * - * Return: 0 success - * -ENODEV channel not found. - * -EBUSY interface is open - * - * Note: If (force != 0), then device will be destroyed even if interface - * associated with it is open. It's caller's responsibility to make - * sure that opened interfaces are not removed! - */ - -static int wanrouter_delete_interface(struct wan_device *wandev, char *name) -{ - struct net_device *dev = NULL, *prev = NULL; - unsigned long smp_flags=0; - - lock_adapter_irq(&wandev->lock, &smp_flags); - dev = wandev->dev; - prev = NULL; - while (dev && strcmp(name, dev->name)) { - struct net_device **slave = netdev_priv(dev); - prev = dev; - dev = *slave; - } - unlock_adapter_irq(&wandev->lock, &smp_flags); - - if (dev == NULL) - return -ENODEV; /* interface not found */ - - if (netif_running(dev)) - return -EBUSY; /* interface in use */ - - if (wandev->del_if) - wandev->del_if(wandev, dev); - - lock_adapter_irq(&wandev->lock, &smp_flags); - if (prev) { - struct net_device **prev_slave = netdev_priv(prev); - struct net_device **slave = netdev_priv(dev); - - *prev_slave = *slave; - } else { - struct net_device **slave = netdev_priv(dev); - wandev->dev = *slave; - } - --wandev->ndev; - unlock_adapter_irq(&wandev->lock, &smp_flags); - - printk(KERN_INFO "%s: unregistering '%s'\n", wandev->name, dev->name); - - unregister_netdev(dev); - - free_netdev(dev); - - return 0; -} - -static void lock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __acquires(lock) -{ - spin_lock_irqsave(lock, *smp_flags); -} - - -static void unlock_adapter_irq(spinlock_t *lock, unsigned long *smp_flags) - __releases(lock) -{ - spin_unlock_irqrestore(lock, *smp_flags); -} - -EXPORT_SYMBOL(register_wan_device); -EXPORT_SYMBOL(unregister_wan_device); - -MODULE_LICENSE("GPL"); - -/* - * End - */ diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c deleted file mode 100644 index c43612ee96bb517ea2b2f806e5e999e39c6cbc0c..0000000000000000000000000000000000000000 --- a/net/wanrouter/wanproc.c +++ /dev/null @@ -1,380 +0,0 @@ -/***************************************************************************** -* wanproc.c WAN Router Module. /proc filesystem interface. -* -* This module is completely hardware-independent and provides -* access to the router using Linux /proc filesystem. -* -* Author: Gideon Hack -* -* Copyright: (c) 1995-1999 Sangoma Technologies Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* as published by the Free Software Foundation; either version -* 2 of the License, or (at your option) any later version. -* ============================================================================ -* Jun 02, 1999 Gideon Hack Updates for Linux 2.2.X kernels. -* Jun 29, 1997 Alan Cox Merged with 1.0.3 vendor code -* Jan 29, 1997 Gene Kozin v1.0.1. Implemented /proc read routines -* Jan 30, 1997 Alan Cox Hacked around for 2.1 -* Dec 13, 1996 Gene Kozin Initial version (based on Sangoma's WANPIPE) -*****************************************************************************/ - -#include /* __initfunc et al. */ -#include /* offsetof(), etc. */ -#include /* return codes */ -#include -#include -#include /* WAN router API definitions */ -#include -#include - -#include -#include - -#define PROC_STATS_FORMAT "%30s: %12lu\n" - -/****** Defines and Macros **************************************************/ - -#define PROT_DECODE(prot) ((prot == WANCONFIG_FR) ? " FR" :\ - (prot == WANCONFIG_X25) ? " X25" : \ - (prot == WANCONFIG_PPP) ? " PPP" : \ - (prot == WANCONFIG_CHDLC) ? " CHDLC": \ - (prot == WANCONFIG_MPPP) ? " MPPP" : \ - " Unknown" ) - -/****** Function Prototypes *************************************************/ - -#ifdef CONFIG_PROC_FS - -/* Miscellaneous */ - -/* - * Structures for interfacing with the /proc filesystem. - * Router creates its own directory /proc/net/router with the following - * entries: - * config device configuration - * status global device statistics - * entry for each WAN device - */ - -/* - * Generic /proc/net/router/ file and inode operations - */ - -/* - * /proc/net/router - */ - -static DEFINE_MUTEX(config_mutex); -static struct proc_dir_entry *proc_router; - -/* Strings */ - -/* - * Interface functions - */ - -/****** Proc filesystem entry points ****************************************/ - -/* - * Iterator - */ -static void *r_start(struct seq_file *m, loff_t *pos) -{ - struct wan_device *wandev; - loff_t l = *pos; - - mutex_lock(&config_mutex); - if (!l--) - return SEQ_START_TOKEN; - for (wandev = wanrouter_router_devlist; l-- && wandev; - wandev = wandev->next) - ; - return wandev; -} - -static void *r_next(struct seq_file *m, void *v, loff_t *pos) -{ - struct wan_device *wandev = v; - (*pos)++; - return (v == SEQ_START_TOKEN) ? wanrouter_router_devlist : wandev->next; -} - -static void r_stop(struct seq_file *m, void *v) -{ - mutex_unlock(&config_mutex); -} - -static int config_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name | port |IRQ|DMA| mem.addr |" - "mem.size|option1|option2|option3|option4\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|0x%-4X|%3u|%3u| 0x%-8lX |0x%-6X|%7u|%7u|%7u|%7u\n", - p->name, p->ioport, p->irq, p->dma, p->maddr, p->msize, - p->hw_opt[0], p->hw_opt[1], p->hw_opt[2], p->hw_opt[3]); - return 0; -} - -static int status_show(struct seq_file *m, void *v) -{ - struct wan_device *p = v; - if (v == SEQ_START_TOKEN) { - seq_puts(m, "Device name |protocol|station|interface|" - "clocking|baud rate| MTU |ndev|link state\n"); - return 0; - } - if (!p->state) - return 0; - seq_printf(m, "%-15s|%-8s| %-7s| %-9s|%-8s|%9u|%5u|%3u |", - p->name, - PROT_DECODE(p->config_id), - p->config_id == WANCONFIG_FR ? - (p->station ? "Node" : "CPE") : - (p->config_id == WANCONFIG_X25 ? - (p->station ? "DCE" : "DTE") : - ("N/A")), - p->interface ? "V.35" : "RS-232", - p->clocking ? "internal" : "external", - p->bps, - p->mtu, - p->ndev); - - switch (p->state) { - case WAN_UNCONFIGURED: - seq_printf(m, "%-12s\n", "unconfigured"); - break; - case WAN_DISCONNECTED: - seq_printf(m, "%-12s\n", "disconnected"); - break; - case WAN_CONNECTING: - seq_printf(m, "%-12s\n", "connecting"); - break; - case WAN_CONNECTED: - seq_printf(m, "%-12s\n", "connected"); - break; - default: - seq_printf(m, "%-12s\n", "invalid"); - break; - } - return 0; -} - -static const struct seq_operations config_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = config_show, -}; - -static const struct seq_operations status_op = { - .start = r_start, - .next = r_next, - .stop = r_stop, - .show = status_show, -}; - -static int config_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &config_op); -} - -static int status_open(struct inode *inode, struct file *file) -{ - return seq_open(file, &status_op); -} - -static const struct file_operations config_fops = { - .owner = THIS_MODULE, - .open = config_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static const struct file_operations status_fops = { - .owner = THIS_MODULE, - .open = status_open, - .read = seq_read, - .llseek = seq_lseek, - .release = seq_release, -}; - -static int wandev_show(struct seq_file *m, void *v) -{ - struct wan_device *wandev = m->private; - - if (wandev->magic != ROUTER_MAGIC) - return 0; - - if (!wandev->state) { - seq_puts(m, "device is not configured!\n"); - return 0; - } - - /* Update device statistics */ - if (wandev->update) { - int err = wandev->update(wandev); - if (err == -EAGAIN) { - seq_puts(m, "Device is busy!\n"); - return 0; - } - if (err) { - seq_puts(m, "Device is not configured!\n"); - return 0; - } - } - - seq_printf(m, PROC_STATS_FORMAT, - "total packets received", wandev->stats.rx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total packets transmitted", wandev->stats.tx_packets); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes received", wandev->stats.rx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "total bytes transmitted", wandev->stats.tx_bytes); - seq_printf(m, PROC_STATS_FORMAT, - "bad packets received", wandev->stats.rx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "packet transmit problems", wandev->stats.tx_errors); - seq_printf(m, PROC_STATS_FORMAT, - "received frames dropped", wandev->stats.rx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "transmit frames dropped", wandev->stats.tx_dropped); - seq_printf(m, PROC_STATS_FORMAT, - "multicast packets received", wandev->stats.multicast); - seq_printf(m, PROC_STATS_FORMAT, - "transmit collisions", wandev->stats.collisions); - seq_printf(m, PROC_STATS_FORMAT, - "receive length errors", wandev->stats.rx_length_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver overrun errors", wandev->stats.rx_over_errors); - seq_printf(m, PROC_STATS_FORMAT, - "CRC errors", wandev->stats.rx_crc_errors); - seq_printf(m, PROC_STATS_FORMAT, - "frame format errors (aborts)", wandev->stats.rx_frame_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver fifo overrun", wandev->stats.rx_fifo_errors); - seq_printf(m, PROC_STATS_FORMAT, - "receiver missed packet", wandev->stats.rx_missed_errors); - seq_printf(m, PROC_STATS_FORMAT, - "aborted frames transmitted", wandev->stats.tx_aborted_errors); - return 0; -} - -static int wandev_open(struct inode *inode, struct file *file) -{ - return single_open(file, wandev_show, PDE(inode)->data); -} - -static const struct file_operations wandev_fops = { - .owner = THIS_MODULE, - .open = wandev_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .unlocked_ioctl = wanrouter_ioctl, -}; - -/* - * Initialize router proc interface. - */ - -int __init wanrouter_proc_init(void) -{ - struct proc_dir_entry *p; - proc_router = proc_mkdir(ROUTER_NAME, init_net.proc_net); - if (!proc_router) - goto fail; - - p = proc_create("config", S_IRUGO, proc_router, &config_fops); - if (!p) - goto fail_config; - p = proc_create("status", S_IRUGO, proc_router, &status_fops); - if (!p) - goto fail_stat; - return 0; -fail_stat: - remove_proc_entry("config", proc_router); -fail_config: - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -fail: - return -ENOMEM; -} - -/* - * Clean up router proc interface. - */ - -void wanrouter_proc_cleanup(void) -{ - remove_proc_entry("config", proc_router); - remove_proc_entry("status", proc_router); - remove_proc_entry(ROUTER_NAME, init_net.proc_net); -} - -/* - * Add directory entry for WAN device. - */ - -int wanrouter_proc_add(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - - wandev->dent = proc_create(wandev->name, S_IRUGO, - proc_router, &wandev_fops); - if (!wandev->dent) - return -ENOMEM; - wandev->dent->data = wandev; - return 0; -} - -/* - * Delete directory entry for WAN device. - */ -int wanrouter_proc_delete(struct wan_device* wandev) -{ - if (wandev->magic != ROUTER_MAGIC) - return -EINVAL; - remove_proc_entry(wandev->name, proc_router); - return 0; -} - -#else - -/* - * No /proc - output stubs - */ - -int __init wanrouter_proc_init(void) -{ - return 0; -} - -void wanrouter_proc_cleanup(void) -{ -} - -int wanrouter_proc_add(struct wan_device *wandev) -{ - return 0; -} - -int wanrouter_proc_delete(struct wan_device *wandev) -{ - return 0; -} - -#endif - -/* - * End - */ -