提交 6f7853f3 编写于 作者: H Hin-Tak Leung 提交者: John W. Linville

rtl8187: change rtl8187_dev.c to support RTL8187B (part 2)

Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NHin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 f8a08c34
......@@ -155,9 +155,11 @@ static void rtl8187_tx_cb(struct urb *urb)
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hw *hw = info->driver_data[0];
struct rtl8187_priv *priv = hw->priv;
usb_free_urb(info->driver_data[1]);
skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
sizeof(struct rtl8187_tx_hdr));
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
ieee80211_tx_status_irqsafe(hw, skb);
......@@ -167,7 +169,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct rtl8187_tx_hdr *hdr;
unsigned int ep;
void *buf;
struct urb *urb;
__le16 rts_dur = 0;
u32 flags;
......@@ -195,16 +198,47 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
if (!priv->is_rtl8187b) {
struct rtl8187_tx_hdr *hdr =
(struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
hdr->flags = cpu_to_le32(flags);
hdr->len = 0;
hdr->rts_duration = rts_dur;
hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
buf = hdr;
ep = 2;
} else {
/* fc needs to be calculated before skb_push() */
unsigned int epmap[4] = { 6, 7, 5, 4 };
struct ieee80211_hdr *tx_hdr =
(struct ieee80211_hdr *)(skb->data);
u16 fc = le16_to_cpu(tx_hdr->frame_control);
struct rtl8187b_tx_hdr *hdr =
(struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
struct ieee80211_rate *txrate =
ieee80211_get_tx_rate(dev, info);
memset(hdr, 0, sizeof(*hdr));
hdr->flags = cpu_to_le32(flags);
hdr->rts_duration = rts_dur;
hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
hdr->tx_duration =
ieee80211_generic_frame_duration(dev, priv->vif,
skb->len, txrate);
buf = hdr;
if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
ep = 12;
else
ep = epmap[skb_get_queue_mapping(skb)];
}
info->driver_data[0] = dev;
info->driver_data[1] = urb;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
hdr, skb->len, rtl8187_tx_cb, skb);
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
buf, skb->len, rtl8187_tx_cb, skb);
rc = usb_submit_urb(urb, GFP_ATOMIC);
if (rc < 0) {
usb_free_urb(urb);
......@@ -220,7 +254,6 @@ static void rtl8187_rx_cb(struct urb *urb)
struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
struct ieee80211_hw *dev = info->dev;
struct rtl8187_priv *priv = dev->priv;
struct rtl8187_rx_hdr *hdr;
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
u32 flags;
......@@ -241,11 +274,33 @@ static void rtl8187_rx_cb(struct urb *urb)
}
skb_put(skb, urb->actual_length);
hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
if (!priv->is_rtl8187b) {
struct rtl8187_rx_hdr *hdr =
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
flags = le32_to_cpu(hdr->flags);
signal = hdr->signal & 0x7f;
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.signal = signal;
rx_status.noise = hdr->noise;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
priv->signal = signal;
priv->quality = signal;
priv->noise = hdr->noise;
} else {
struct rtl8187b_rx_hdr *hdr =
(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
flags = le32_to_cpu(hdr->flags);
skb_trim(skb, flags & 0x0FFF);
signal = hdr->agc >> 1;
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.signal = 64 - min(hdr->noise, (u8)64);
rx_status.noise = hdr->noise;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
priv->signal = hdr->signal;
priv->quality = hdr->agc >> 1;
priv->noise = hdr->noise;
}
skb_trim(skb, flags & 0x0FFF);
rate = (flags >> 20) & 0xF;
if (rate > 3) { /* OFDM rate */
if (signal > 90)
......@@ -261,13 +316,11 @@ static void rtl8187_rx_cb(struct urb *urb)
signal = 95 - signal;
}
rx_status.antenna = (hdr->signal >> 7) & 1;
rx_status.qual = 64 - min(hdr->noise, (u8)64);
rx_status.qual = priv->quality;
rx_status.signal = signal;
rx_status.rate_idx = rate;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
rx_status.mactime = le64_to_cpu(hdr->mac_time);
rx_status.flag |= RX_FLAG_TSFT;
if (flags & (1 << 13))
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
......@@ -307,7 +360,8 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
break;
}
usb_fill_bulk_urb(entry, priv->udev,
usb_rcvbulkpipe(priv->udev, 1),
usb_rcvbulkpipe(priv->udev,
priv->is_rtl8187b ? 3 : 1),
skb_tail_pointer(skb),
RTL8187_MAX_RX, rtl8187_rx_cb, skb);
info = (struct rtl8187_rx_info *)skb->cb;
......@@ -786,6 +840,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
msleep(10);
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
if (!priv->is_rtl8187b) {
rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
......@@ -799,6 +854,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
}
}
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
......@@ -813,14 +869,20 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
{
struct rtl8187_priv *priv = dev->priv;
int i;
u8 reg;
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
if (is_valid_ether_addr(conf->bssid))
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
else
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
if (is_valid_ether_addr(conf->bssid)) {
reg = RTL818X_MSR_INFRA;
if (priv->is_rtl8187b)
reg |= RTL818X_MSR_ENEDCA;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
} else {
reg = RTL818X_MSR_NO_LINK;
rtl818x_iowrite8(priv, &priv->map->MSR, reg);
}
return 0;
}
......@@ -907,6 +969,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
struct rtl8187_priv *priv;
struct eeprom_93cx6 eeprom;
struct ieee80211_channel *channel;
const char *chip_name;
u16 txpwr, reg;
int err, i;
DECLARE_MAC_BUF(mac);
......@@ -918,6 +981,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
}
priv = dev->priv;
priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B) ||
!memcmp(udev->product, "RTL8187B", 8);
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
......@@ -946,8 +1011,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
sizeof(struct rtl8187_tx_hdr) :
sizeof(struct rtl8187b_tx_hdr);
if (!priv->is_rtl8187b)
dev->queues = 1;
else
dev->queues = 4;
dev->max_signal = 65;
eeprom.data = dev;
......@@ -982,12 +1052,26 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
if (!priv->is_rtl8187b) {
for (i = 0; i < 2; i++) {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
eeprom_93cx6_read(&eeprom,
RTL8187_EEPROM_TXPWR_CHAN_6 + i,
&txpwr);
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
} else {
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
&txpwr);
(*channel++).hw_value = txpwr & 0xFF;
eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
(*channel++).hw_value = txpwr & 0xFF;
eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
&priv->txpwr_base);
......@@ -1001,6 +1085,50 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
if (!priv->is_rtl8187b) {
u32 reg32;
reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
reg32 &= RTL818X_TX_CONF_HWVER_MASK;
switch (reg32) {
case RTL818X_TX_CONF_R8187vD_1:
case RTL818X_TX_CONF_R8187vD_2:
chip_name = "RTL8187vD";
break;
default:
chip_name = "RTL8187vB (default)";
}
} else {
printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
"is EXPERIMENTAL, and could damage your\n"
" hardware, use at your own risk\n");
/*
* Force USB request to write radio registers for 8187B, Realtek
* only uses it in their sources
*/
/*if (priv->asic_rev == 0) {
printk(KERN_WARNING "rtl8187: Forcing use of USB "
"requests to write to radio registers\n");
priv->asic_rev = 1;
}*/
switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
case RTL818X_R8187B_B:
chip_name = "RTL8187BvB";
priv->hw_rev = RTL8187BvB;
break;
case RTL818X_R8187B_D:
chip_name = "RTL8187BvD";
priv->hw_rev = RTL8187BvD;
break;
case RTL818X_R8187B_E:
chip_name = "RTL8187BvE";
priv->hw_rev = RTL8187BvE;
break;
default:
chip_name = "RTL8187BvB (default)";
priv->hw_rev = RTL8187BvB;
}
}
priv->rf = rtl8187_detect_rf(dev);
err = ieee80211_register_hw(dev);
......@@ -1009,9 +1137,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
goto err_free_dev;
}
printk(KERN_INFO "%s: hwaddr %s, rtl8187 V%d + %s\n",
printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n",
wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
priv->asic_rev, priv->rf->name);
chip_name, priv->asic_rev, priv->rf->name);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册