diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 38b366b00c571eda38e7faf7febc751bbeb212ad..7b70a074095df9e3871677e51981928248a7192a 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -24,7 +24,7 @@ #define ASPEED_MPLL_PARAM 0x20 #define ASPEED_HPLL_PARAM 0x24 #define AST2500_HPLL_BYPASS_EN BIT(20) -#define AST2400_HPLL_STRAPPED BIT(18) +#define AST2400_HPLL_PROGRAMMED BIT(18) #define AST2400_HPLL_BYPASS_EN BIT(17) #define ASPEED_MISC_CTRL 0x2c #define UART_DIV13_EN BIT(12) @@ -91,8 +91,8 @@ static const struct aspeed_gate_data aspeed_gates[] = { [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ - [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ - [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ + [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", CLK_IS_CRITICAL }, /* PCIe/PCI */ + [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ @@ -212,9 +212,22 @@ static int aspeed_clk_is_enabled(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); u32 clk = BIT(gate->clock_idx); + u32 rst = BIT(gate->reset_idx); u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; u32 reg; + /* + * If the IP is in reset, treat the clock as not enabled, + * this happens with some clocks such as the USB one when + * coming from cold reset. Without this, aspeed_clk_enable() + * will fail to lift the reset. + */ + if (gate->reset_idx >= 0) { + regmap_read(gate->map, ASPEED_RESET_CTRL, ®); + if (reg & rst) + return 0; + } + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); return ((reg & clk) == enval) ? 1 : 0; @@ -565,29 +578,45 @@ builtin_platform_driver(aspeed_clk_driver); static void __init aspeed_ast2400_cc(struct regmap *map) { struct clk_hw *hw; - u32 val, freq, div; + u32 val, div, clkin, hpll; + const u16 hpll_rates[][4] = { + {384, 360, 336, 408}, + {400, 375, 350, 425}, + }; + int rate; /* * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by * strapping */ regmap_read(map, ASPEED_STRAP, &val); - if (val & CLKIN_25MHZ_EN) - freq = 25000000; - else if (val & AST2400_CLK_SOURCE_SEL) - freq = 48000000; - else - freq = 24000000; - hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq); - pr_debug("clkin @%u MHz\n", freq / 1000000); + rate = (val >> 8) & 3; + if (val & CLKIN_25MHZ_EN) { + clkin = 25000000; + hpll = hpll_rates[1][rate]; + } else if (val & AST2400_CLK_SOURCE_SEL) { + clkin = 48000000; + hpll = hpll_rates[0][rate]; + } else { + clkin = 24000000; + hpll = hpll_rates[0][rate]; + } + hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, clkin); + pr_debug("clkin @%u MHz\n", clkin / 1000000); /* * High-speed PLL clock derived from the crystal. This the CPU clock, - * and we assume that it is enabled + * and we assume that it is enabled. It can be configured through the + * HPLL_PARAM register, or set to a specified frequency by strapping. */ regmap_read(map, ASPEED_HPLL_PARAM, &val); - WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured"); - aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val); + if (val & AST2400_HPLL_PROGRAMMED) + hw = aspeed_ast2400_calc_pll("hpll", val); + else + hw = clk_hw_register_fixed_rate(NULL, "hpll", "clkin", 0, + hpll * 1000000); + + aspeed_clk_data->hws[ASPEED_CLK_HPLL] = hw; /* * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9760b526ca31da90c4c288ac096cb0fee7d16cbf..e2ed078abd90c7b0e775a4e8e510ab46151c82ef 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "clk.h" @@ -2559,7 +2558,7 @@ static const struct { unsigned long flag; const char *name; } clk_flags[] = { -#define ENTRY(f) { f, __stringify(f) } +#define ENTRY(f) { f, #f } ENTRY(CLK_SET_RATE_GATE), ENTRY(CLK_SET_PARENT_GATE), ENTRY(CLK_SET_RATE_PARENT), diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c index 58f546e048073160e40bedf637894b189072b143..e4cf96ba704ed98ff2a277af75da8c7a3a5b8ee0 100644 --- a/drivers/clk/meson/clk-audio-divider.c +++ b/drivers/clk/meson/clk-audio-divider.c @@ -51,7 +51,7 @@ static unsigned long audio_divider_recalc_rate(struct clk_hw *hw, struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); unsigned long divider; - divider = meson_parm_read(clk->map, &adiv->div); + divider = meson_parm_read(clk->map, &adiv->div) + 1; return DIV_ROUND_UP_ULL((u64)parent_rate, divider); } diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 240658404367f38670b79a2d40fcd1cdba92c67b..177fffb9ebefe4c5d059e149a912f3c14ecc3ea2 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -498,6 +498,7 @@ static struct clk_regmap gxbb_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c index 6860bd5a37c5e50e9be9e26c40981dea33d57dfc..44e4e27eddada1dd96a3a3d9ae414bd711a89d4d 100644 --- a/drivers/clk/mvebu/armada-37xx-periph.c +++ b/drivers/clk/mvebu/armada-37xx-periph.c @@ -35,6 +35,7 @@ #define CLK_SEL 0x10 #define CLK_DIS 0x14 +#define ARMADA_37XX_DVFS_LOAD_1 1 #define LOAD_LEVEL_NR 4 #define ARMADA_37XX_NB_L0L1 0x18 @@ -507,6 +508,40 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; } +/* + * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz + * respectively) to L0 frequency (1.2 Ghz) requires a significant + * amount of time to let VDD stabilize to the appropriate + * voltage. This amount of time is large enough that it cannot be + * covered by the hardware countdown register. Due to this, the CPU + * might start operating at L0 before the voltage is stabilized, + * leading to CPU stalls. + * + * To work around this problem, we prevent switching directly from the + * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 + * frequency in-between. The sequence therefore becomes: + * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) + * 2. Sleep 20ms for stabling VDD voltage + * 3. Then switch from L1(600MHZ) to L0(1200Mhz). + */ +static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) +{ + unsigned int cur_level; + + if (rate != 1200 * 1000 * 1000) + return; + + regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); + cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; + if (cur_level <= ARMADA_37XX_DVFS_LOAD_1) + return; + + regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, + ARMADA_37XX_NB_CPU_LOAD_MASK, + ARMADA_37XX_DVFS_LOAD_1); + msleep(20); +} + static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -537,6 +572,9 @@ static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, */ reg = ARMADA_37XX_NB_CPU_LOAD; mask = ARMADA_37XX_NB_CPU_LOAD_MASK; + + clk_pm_cpu_set_rate_wa(rate, base); + regmap_update_bits(base, reg, mask, load_level); return rate; diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c index 9f35b3fe1d9731f78fcd095cc544274a3c1c872a..ff8d66fd94e6198ac7abe91ce4f8e4dcc071897c 100644 --- a/drivers/clk/qcom/gcc-msm8996.c +++ b/drivers/clk/qcom/gcc-msm8996.c @@ -2781,6 +2781,7 @@ static struct clk_branch gcc_ufs_rx_cfg_clk = { static struct clk_branch gcc_ufs_tx_symbol_0_clk = { .halt_reg = 0x75018, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75018, .enable_mask = BIT(0), diff --git a/drivers/clk/qcom/mmcc-msm8996.c b/drivers/clk/qcom/mmcc-msm8996.c index 1a25ee4f3658672bc8f4a4bc8c55c0492289ea61..4b20d1b67a1b77b0f6c735213c43e28a4dfa6dee 100644 --- a/drivers/clk/qcom/mmcc-msm8996.c +++ b/drivers/clk/qcom/mmcc-msm8996.c @@ -2910,6 +2910,7 @@ static struct gdsc mmagic_bimc_gdsc = { .name = "mmagic_bimc", }, .pwrsts = PWRSTS_OFF_ON, + .flags = ALWAYS_ON, }; static struct gdsc mmagic_video_gdsc = {