Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 6d1d1698 编写于 作者: A Alan Cox 提交者： Linus Torvalds
浏览文件
操作

tty-usb-ipw: Coding style 

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 eb6215cc
显示空白变更内容
内联 并排
Showing with 144 addition and 135 deletion
drivers/usb/serial/ipw.c
浏览文件 @ 6d1d1698
......@@ -47,7 +47,7 @@
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
/*
* Version Information
......@@ -64,7 +64,7 @@
/* Message sizes */
#define EVENT_BUFFER_SIZE 0xFF
#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
#define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
#define NUM_BULK_URBS 24
#define NUM_CONTROL_URBS 16
......@@ -94,33 +94,34 @@ enum {
/* data bits */
#define ipw_dtb_7 0x700
#define ipw_dtb_8 0x810 // ok so the define is misleading, I know, but forces 8,n,1
// I mean, is there a point to any other setting these days? :)
#define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */
/* I mean, is there a point to any other setting these days? :) */
/* usb control request types : */
#define IPW_SIO_RXCTL 0x00 // control bulk rx channel transmissions, value=1/0 (on/off)
#define IPW_SIO_SET_BAUD 0x01 // set baud, value=requested ipw_sio_bxxxx
#define IPW_SIO_SET_LINE 0x03 // set databits, parity. value=ipw_dtb_x
#define IPW_SIO_SET_PIN 0x03 // set/clear dtr/rts value=ipw_pin_xxx
#define IPW_SIO_POLL 0x08 // get serial port status byte, call with value=0
#define IPW_SIO_INIT 0x11 // initializes ? value=0 (appears as first thing todo on open)
#define IPW_SIO_PURGE 0x12 // purge all transmissions?, call with value=numchar_to_purge
#define IPW_SIO_HANDFLOW 0x13 // set xon/xoff limits value=0, and a buffer of 0x10 bytes
#define IPW_SIO_SETCHARS 0x13 // set the flowcontrol special chars, value=0, buf=6 bytes,
// last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
#define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */
#define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */
#define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */
#define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */
#define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */
#define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */
#define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */
#define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */
#define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */
/* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */
/* values used for request IPW_SIO_SET_PIN */
#define IPW_PIN_SETDTR 0x101
#define IPW_PIN_SETRTS 0x202
#define IPW_PIN_CLRDTR 0x100
#define IPW_PIN_CLRRTS 0x200 // unconfirmed
#define IPW_PIN_CLRRTS 0x200 /* unconfirmed */
/* values used for request IPW_SIO_RXCTL */
#define IPW_RXBULK_ON 1
#define IPW_RXBULK_OFF 0
/* various 16 byte hardcoded transferbuffers used by flow control */
#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0 }
/* Interpretation of modem status lines */
/* These need sorting out by individually connecting pins and checking
......@@ -132,17 +133,6 @@ enum {
#define IPW_CTS ((1<<5) | (1<<4))
#define IPW_WANTS_TO_SEND 0x30
//#define IPW_DTR /* Data Terminal Ready */
//#define IPW_CTS /* Clear To Send */
//#define IPW_CD /* Carrier Detect */
//#define IPW_DSR /* Data Set Ready */
//#define IPW_RxD /* Receive pin */
//#define IPW_LE
//#define IPW_RTS
//#define IPW_ST
//#define IPW_SR
//#define IPW_RI /* Ring Indicator */
static struct usb_device_id usb_ipw_ids[] = {
{ USB_DEVICE(IPW_VID, IPW_PID) },
......@@ -177,7 +167,8 @@ static void ipw_read_bulk_callback(struct urb *urb)
return;
}
usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
usb_serial_debug_data(debug, &port->dev, __func__,
urb->actual_length, data);
tty = port->port.tty;
if (tty && urb->actual_length) {
......@@ -187,7 +178,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
}
/* Continue trying to always read */
usb_fill_bulk_urb (port->read_urb, port->serial->dev,
usb_fill_bulk_urb(port->read_urb, port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
......@@ -195,7 +186,9 @@ static void ipw_read_bulk_callback(struct urb *urb)
ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
__func__, result);
return;
}
......@@ -216,10 +209,11 @@ static int ipw_open(struct tty_struct *tty,
if (tty)
tty->low_latency = 1;
/* --1: Tell the modem to initialize (we think) From sniffs this is always the
* first thing that gets sent to the modem during opening of the device */
dbg("%s: Sending SIO_INIT (we guess)",__func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
dbg("%s: Sending SIO_INIT (we guess)", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_INIT,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
0,
......@@ -228,14 +222,17 @@ static int ipw_open(struct tty_struct *tty,
0,
100000);
if (result < 0)
dev_err(&port->dev, "Init of modem failed (error = %d)\n", result);
dev_err(&port->dev,
"Init of modem failed (error = %d)\n", result);
/* reset the bulk pipes */
usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
usb_clear_halt(dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
usb_clear_halt(dev,
usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
/*--2: Start reading from the device */
dbg("%s: setting up bulk read callback",__func__);
dbg("%s: setting up bulk read callback", __func__);
usb_fill_bulk_urb(port->read_urb, dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
port->bulk_in_buffer,
......@@ -243,10 +240,11 @@ static int ipw_open(struct tty_struct *tty,
ipw_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result < 0)
dbg("%s - usb_submit_urb(read bulk) failed with status %d", __func__, result);
dbg("%s - usb_submit_urb(read bulk) failed with status %d",
__func__, result);
/*--3: Tell the modem to open the floodgates on the rx bulk channel */
dbg("%s:asking modem for RxRead (RXBULK_ON)",__func__);
dbg("%s:asking modem for RxRead (RXBULK_ON)", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_RXCTL,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -256,10 +254,11 @@ static int ipw_open(struct tty_struct *tty,
0,
100000);
if (result < 0)
dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)\n", result);
dev_err(&port->dev,
"Enabling bulk RxRead failed (error = %d)\n", result);
/*--4: setup the initial flowcontrol */
dbg("%s:setting init flowcontrol (%s)",__func__,buf_flow_init);
dbg("%s:setting init flowcontrol (%s)", __func__, buf_flow_init);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_HANDFLOW,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -269,11 +268,12 @@ static int ipw_open(struct tty_struct *tty,
0x10,
200000);
if (result < 0)
dev_err(&port->dev, "initial flowcontrol failed (error = %d)\n", result);
dev_err(&port->dev,
"initial flowcontrol failed (error = %d)\n", result);
/*--5: raise the dtr */
dbg("%s:raising dtr",__func__);
dbg("%s:raising dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -283,10 +283,11 @@ static int ipw_open(struct tty_struct *tty,
0,
200000);
if (result < 0)
dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
dev_err(&port->dev,
"setting dtr failed (error = %d)\n", result);
/*--6: raise the rts */
dbg("%s:raising rts",__func__);
dbg("%s:raising rts", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -296,14 +297,15 @@ static int ipw_open(struct tty_struct *tty,
0,
200000);
if (result < 0)
dev_err(&port->dev, "setting dtr failed (error = %d)\n", result);
dev_err(&port->dev,
"setting dtr failed (error = %d)\n", result);
kfree(buf_flow_init);
return 0;
}
static void ipw_close(struct tty_struct *tty,
struct usb_serial_port *port, struct file * filp)
struct usb_serial_port *port, struct file *filp)
{
struct usb_device *dev = port->serial->dev;
int result;
......@@ -314,7 +316,7 @@ static void ipw_close(struct tty_struct *tty,
}
/*--1: drop the dtr */
dbg("%s:dropping dtr",__func__);
dbg("%s:dropping dtr", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -324,25 +326,29 @@ static void ipw_close(struct tty_struct *tty,
0,
200000);
if (result < 0)
dev_err(&port->dev, "dropping dtr failed (error = %d)\n", result);
dev_err(&port->dev, "dropping dtr failed (error = %d)\n",
result);
/*--2: drop the rts */
dbg("%s:dropping rts",__func__);
dbg("%s:dropping rts", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
USB_RECIP_INTERFACE | USB_DIR_OUT,
IPW_PIN_CLRRTS,
0,
NULL,
0,
200000);
if (result < 0)
dev_err(&port->dev, "dropping rts failed (error = %d)\n", result);
dev_err(&port->dev,
"dropping rts failed (error = %d)\n", result);
/*--3: purge */
dbg("%s:sending purge",__func__);
dbg("%s:sending purge", __func__);
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
IPW_SIO_PURGE, USB_TYPE_VENDOR |
USB_RECIP_INTERFACE | USB_DIR_OUT,
0x03,
0,
NULL,
......@@ -352,7 +358,8 @@ static void ipw_close(struct tty_struct *tty,
dev_err(&port->dev, "purge failed (error = %d)\n", result);
/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
/* send RXBULK_off (tell modem to stop transmitting bulk data on
rx chan) */
result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
IPW_SIO_RXCTL,
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
......@@ -363,7 +370,8 @@ static void ipw_close(struct tty_struct *tty,
100000);
if (result < 0)
dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)\n", result);
dev_err(&port->dev,
"Disabling bulk RxRead failed (error = %d)\n", result);
/* shutdown any in-flight urbs that we know about */
usb_kill_urb(port->read_urb);
......@@ -393,7 +401,7 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
int ret;
dbg("%s: TOP: count=%d, in_interrupt=%ld", __func__,
count, in_interrupt() );
count, in_interrupt());
if (count == 0) {
dbg("%s - write request of 0 bytes", __func__);
......@@ -424,7 +432,8 @@ static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (ret != 0) {
port->write_urb_busy = 0;
dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __func__, ret);
dbg("%s - usb_submit_urb(write bulk) failed with error = %d",
__func__, ret);
return ret;
}
......@@ -489,8 +498,8 @@ module_init(usb_ipw_init);
module_exit(usb_ipw_exit);
/* Module information */
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或