Merge tag 'renesas-dt-for-v3.11' of...

Merge tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM-based SoC DT updates for v3.11

* Armadillo800eva reference DT - bring up armadillo800eva baord
  using DT as much as possible
* Remove unused GIC dtsi entries for r8a7790 and r8a73a4
* Add AS3711 and CPUFreq DT bindings for kzm9g-reference
* Add irqpin DT support for marzen-reference

* tag 'renesas-dt-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: marzen-reference: add irqpin support in DT
  ARM: shmobile: kzm9g-reference: add AS3711 and CPUFreq DT bindings
  ARM: shmobile: armadillo800eva: Reference DT implementation
  ARM: shmobile: Remove unused r8a7790 GIC CPU interface DT bits
  ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bits
  ARM: shmobile: r8a7740: Prepare for reference DT setup
  ARM: shmobile: r8a7740: Add OF support to initialze the GIC
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -166,6 +166,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
+	r8a7740-armadillo800eva-reference.dtb \
 	r8a7779-marzen-reference.dtb \
 	r8a7790-lager.dtb \
 	sh73a0-kzm9g.dtb \

arch/arm/boot/dts/r8a73a4.dtsi

@@ -37,12 +37,6 @@
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
-
-		gic-cpuif@4 {
-			compatible = "arm,gic-cpuif";
-			cpuif-id = <4>;
-			cpu = <&cpu0>;
-		};
 	};
 
 	timer {

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

+/*
+ * Reference Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7740.dtsi"
+
+/ {
+	model = "armadillo 800 eva reference";
+	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
+
+	chosen {
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&i2c0 {
+	touchscreen: st1232@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+	};
+};

arch/arm/boot/dts/r8a7740.dtsi

@@ -22,4 +22,121 @@
 			reg = <0x0>;
 		};
 	};
+
+	gic: interrupt-controller@c2800000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0xc2800000 0x1000>,
+		      <0xc2000000 0x1000>;
+	};
+
+	/* irqpin0: IRQ0 - IRQ7 */
+	irqpin0: irqpin@e6900000 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4>;
+	};
+
+	/* irqpin1: IRQ8 - IRQ15 */
+	irqpin1: irqpin@e6900004 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4>;
+	};
+
+	/* irqpin2: IRQ16 - IRQ23 */
+	irqpin2: irqpin@e6900008 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4>;
+	};
+
+	/* irqpin3: IRQ24 - IRQ31 */
+	irqpin3: irqpin@e690000c {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4
+			      0 149 0x4>;
+	};
+
+	i2c0: i2c@fff20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xfff20000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 201 0x4
+			      0 202 0x4
+			      0 203 0x4
+			      0 204 0x4>;
+	};
+
+	i2c1: i2c@e6c20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6c20000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 70 0x4
+			      0 71 0x4
+			      0 72 0x4
+			      0 73 0x4>;
+	};
 };

arch/arm/boot/dts/r8a7779.dtsi

@@ -48,6 +48,23 @@
                       <0xf0000100 0x100>;
         };
 
+	irqpin0: irqpin@fe780010 {
+		compatible = "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 27 0x4
+				0 28 0x4
+				0 29 0x4
+				0 30 0x4>;
+		sense-bitfield-width = <2>;
+	};
+
 	i2c0: i2c@0xffc70000 {
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm/boot/dts/r8a7790.dtsi

@@ -36,12 +36,6 @@
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
-
-		gic-cpuif@4 {
-			compatible = "arm,gic-cpuif";
-			cpuif-id = <4>;
-			cpu = <&cpu0>;
-		};
 	};
 
 	timer {

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

@@ -18,6 +18,19 @@
 	model = "KZM-A9-GT";
 	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_dvfs>;
+			operating-points = <
+				/* kHz  uV */
+				1196000 1315000
+				 598000 1175000
+				 398667 1065000
+			>;
+			voltage-tolerance = <1>; /* 1% */
+		};
+	};
+
 	chosen {
 		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
 	};
@@ -59,6 +72,79 @@
 	};
 };
 
+&i2c0 {
+	as3711@40 {
+		compatible = "ams,as3711";
+		reg = <0x40>;
+
+		regulators {
+			vdd_dvfs: sd1 {
+				regulator-name = "1.315V CPU";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd2 {
+				regulator-name = "1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd4 {
+				regulator-name = "1.215V";
+				regulator-min-microvolt = <1215000>;
+				regulator-max-microvolt = <1235000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2 {
+				regulator-name = "2.8V CPU";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo3 {
+				regulator-name = "3.0V CPU";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo4 {
+				regulator-name = "2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo5 {
+				regulator-name = "2.8V #2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo7 {
+				regulator-name = "1.15V CPU";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo8 {
+				regulator-name = "1.15V CPU #2";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &mmcif {
 	bus-width = <8>;
 	vmmc-supply = <&reg_1p8v>;

arch/arm/mach-shmobile/Kconfig

@@ -129,6 +129,20 @@ config MACH_ARMADILLO800EVA
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
 	select USE_OF
 
+config MACH_ARMADILLO800EVA_REFERENCE
+	bool "Armadillo-800 EVA board - Reference Device Tree Implementation"
+	depends on ARCH_R8A7740
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_WM8978 if SND_SIMPLE_CARD
+	select USE_OF
+	---help---
+	   Use reference implementation of Aramdillo800 EVA board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_BOCKW
 	bool "BOCK-W platform"
 	depends on ARCH_R8A7778

arch/arm/mach-shmobile/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o

arch/arm/mach-shmobile/board-armadillo800eva-reference.c

+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/pinctrl/machine.h>
+#include <mach/common.h>
+#include <mach/r8a7740.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * CON1		Camera Module
+ * CON2		Extension Bus
+ * CON3		HDMI Output
+ * CON4		Composite Video Output
+ * CON5		H-UDI JTAG
+ * CON6		ARM JTAG
+ * CON7		SD1
+ * CON8		SD2
+ * CON9		RTC BackUp
+ * CON10	Monaural Mic Input
+ * CON11	Stereo Headphone Output
+ * CON12	Audio Line Output(L)
+ * CON13	Audio Line Output(R)
+ * CON14	AWL13 Module
+ * CON15	Extension
+ * CON16	LCD1
+ * CON17	LCD2
+ * CON19	Power Input
+ * CON20	USB1
+ * CON21	USB2
+ * CON22	Serial
+ * CON23	LAN
+ * CON24	USB3
+ * LED1		Camera LED(Yellow)
+ * LED2		Power LED (Green)
+ * ED3-LED6	User LED(Yellow)
+ * LED7		LAN link LED(Green)
+ * LED8		LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ *                    SW1
+ *
+ * -12345678-+---------------+----------------------------
+ *  1        | boot          | hermit
+ *  0        | boot          | OS auto boot
+ * -12345678-+---------------+----------------------------
+ *   00      | boot device   | eMMC
+ *   10      | boot device   | SDHI0 (CON7)
+ *   01      | boot device   | -
+ *   11      | boot device   | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ *     0     | Extension Bus | D8-D15 disable, eMMC enable
+ *     1     | Extension Bus | D8-D15 enable,  eMMC disable
+ * -12345678-+---------------+----------------------------
+ *      0    | SDHI1         | COM8 disable, COM14 enable
+ *      1    | SDHI1         | COM8 enable,  COM14 disable
+ * -12345678-+---------------+----------------------------
+ *       0   | USB0          | COM20 enable,  COM24 disable
+ *       1   | USB0          | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ *        00 | JTAG          | SH-X2
+ *        10 | JTAG          | ARM
+ *        01 | JTAG          | -
+ *        11 | JTAG          | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * FSI-WM8978
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ *	usbhsf_power_ctrl()
+ */
+
+static const struct pinctrl_map eva_pinctrl_map[] = {
+	/* SCIFA1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+				  "scifa1_data", "scifa1"),
+};
+
+static void __init eva_clock_init(void)
+{
+	struct clk *system	= clk_get(NULL, "system_clk");
+	struct clk *xtal1	= clk_get(NULL, "extal1");
+	struct clk *usb24s	= clk_get(NULL, "usb24s");
+	struct clk *fsibck	= clk_get(NULL, "fsibck");
+
+	if (IS_ERR(system)	||
+	    IS_ERR(xtal1)	||
+	    IS_ERR(usb24s)	||
+	    IS_ERR(fsibck)) {
+		pr_err("armadillo800eva board clock init failed\n");
+		goto clock_error;
+	}
+
+	/* armadillo 800 eva extal1 is 24MHz */
+	clk_set_rate(xtal1, 24000000);
+
+	/* usb24s use extal1 (= system) clock (= 24MHz) */
+	clk_set_parent(usb24s, system);
+
+	/* FSIBCK is 12.288MHz, and it is parent of FSI-B */
+	clk_set_rate(fsibck, 12288000);
+
+clock_error:
+	if (!IS_ERR(system))
+		clk_put(system);
+	if (!IS_ERR(xtal1))
+		clk_put(xtal1);
+	if (!IS_ERR(usb24s))
+		clk_put(usb24s);
+	if (!IS_ERR(fsibck))
+		clk_put(fsibck);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+
+	r8a7740_clock_init(MD_CK0 | MD_CK2);
+	eva_clock_init();
+
+	pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
+	r8a7740_pinmux_init();
+
+	r8a7740_meram_workaround();
+
+	/*
+	 * Touchscreen
+	 * TODO: Move reset GPIO over to .dts when we can reference it
+	 */
+	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
+	l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+	r8a7740_add_standard_devices_dt();
+	r8a7740_pm_init();
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+	"renesas,armadillo800eva-reference",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
+	.map_io		= r8a7740_map_io,
+	.init_early	= r8a7740_init_delay,
+	.init_irq	= r8a7740_init_irq_of,
+	.init_machine	= eva_init,
+	.init_time	= shmobile_timer_init,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= eva_boards_compat_dt,
+	.restart	= eva_restart,
+MACHINE_END

arch/arm/mach-shmobile/include/mach/r8a7740.h

@@ -533,10 +533,13 @@ enum {
 };
 
 extern void r8a7740_meram_workaround(void);
+extern void r8a7740_init_delay(void);
 extern void r8a7740_init_irq(void);
+extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
+extern void r8a7740_add_standard_devices_dt(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
 extern void r8a7740_pm_init(void);

arch/arm/mach-shmobile/intc-r8a7740.c

@@ -20,19 +20,15 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 
-void __init r8a7740_init_irq(void)
+static void __init r8a7740_init_irq_common(void)
 {
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
 	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
 	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
 	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
 
-	/* initialize the Generic Interrupt Controller PL390 r0p0 */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
 	/* route signals to GIC */
 	iowrite32(0x0, pfc_inta_ctrl);
 
@@ -54,3 +50,19 @@ void __init r8a7740_init_irq(void)
 	iounmap(intc_msk_base);
 	iounmap(pfc_inta_ctrl);
 }
+
+void __init r8a7740_init_irq_of(void)
+{
+	irqchip_init();
+	r8a7740_init_irq_common();
+}
+
+void __init r8a7740_init_irq(void)
+{
+	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+	/* initialize the Generic Interrupt Controller PL390 r0p0 */
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
+	r8a7740_init_irq_common();
+}

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -531,11 +531,7 @@ static struct platform_device ipmmu_device = {
 	.num_resources  = ARRAY_SIZE(ipmmu_resources),
 };
 
-static struct platform_device *r8a7740_early_devices[] __initdata = {
-	&irqpin0_device,
-	&irqpin1_device,
-	&irqpin2_device,
-	&irqpin3_device,
+static struct platform_device *r8a7740_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
 	&scif2_device,
@@ -546,6 +542,13 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&scif7_device,
 	&scifb_device,
 	&cmt10_device,
+};
+
+static struct platform_device *r8a7740_early_devices[] __initdata = {
+	&irqpin0_device,
+	&irqpin1_device,
+	&irqpin2_device,
+	&irqpin3_device,
 	&tmu00_device,
 	&tmu01_device,
 	&tmu02_device,
@@ -965,6 +968,8 @@ void __init r8a7740_add_standard_devices(void)
 	/* add devices */
 	platform_add_devices(r8a7740_early_devices,
 			    ARRAY_SIZE(r8a7740_early_devices));
+	platform_add_devices(r8a7740_devices_dt,
+			    ARRAY_SIZE(r8a7740_devices_dt));
 	platform_add_devices(r8a7740_late_devices,
 			     ARRAY_SIZE(r8a7740_late_devices));
 
@@ -986,6 +991,8 @@ void __init r8a7740_add_early_devices(void)
 {
 	early_platform_add_devices(r8a7740_early_devices,
 				   ARRAY_SIZE(r8a7740_early_devices));
+	early_platform_add_devices(r8a7740_devices_dt,
+				   ARRAY_SIZE(r8a7740_devices_dt));
 
 	/* setup early console here as well */
 	shmobile_setup_console();
@@ -993,33 +1000,29 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init r8a7740_add_early_devices_dt(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-
-	early_platform_add_devices(r8a7740_early_devices,
-				   ARRAY_SIZE(r8a7740_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
 static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
 	{ }
 };
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
-	/* clocks are setup late during boot in the case of DT */
-	r8a7740_clock_init(0);
-
-	platform_add_devices(r8a7740_early_devices,
-			    ARRAY_SIZE(r8a7740_early_devices));
-
+	platform_add_devices(r8a7740_devices_dt,
+			    ARRAY_SIZE(r8a7740_devices_dt));
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     r8a7740_auxdata_lookup, NULL);
 }
 
+void __init r8a7740_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+};
+
+static void __init r8a7740_generic_init(void)
+{
+	r8a7740_clock_init(0);
+	r8a7740_add_standard_devices_dt();
+}
+
 static const char *r8a7740_boards_compat_dt[] __initdata = {
 	"renesas,r8a7740",
 	NULL,
@@ -1027,9 +1030,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.map_io		= r8a7740_map_io,
-	.init_early	= r8a7740_add_early_devices_dt,
-	.init_irq	= r8a7740_init_irq,
-	.init_machine	= r8a7740_add_standard_devices_dt,
+	.init_early	= r8a7740_init_delay,
+	.init_irq	= r8a7740_init_irq_of,
+	.init_machine	= r8a7740_generic_init,
+	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END