From 6baff7f9a6c571dcd9a59820e3c094f7490cb0fd Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 14 Jan 2009 20:17:06 +0100 Subject: [PATCH] ath9k: move PCI code into separate file Now that we have converted all bus specific routines to replaceable, we can move the PCI specific codes into a separate file. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos Signed-off-by: Imre Kaloz Tested-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/Makefile | 1 + drivers/net/wireless/ath9k/core.h | 19 +- drivers/net/wireless/ath9k/main.c | 300 ++-------------------------- drivers/net/wireless/ath9k/pci.c | 287 ++++++++++++++++++++++++++ 4 files changed, 328 insertions(+), 279 deletions(-) create mode 100644 drivers/net/wireless/ath9k/pci.c diff --git a/drivers/net/wireless/ath9k/Makefile b/drivers/net/wireless/ath9k/Makefile index 1209d14613ac..af3f39bbddd5 100644 --- a/drivers/net/wireless/ath9k/Makefile +++ b/drivers/net/wireless/ath9k/Makefile @@ -11,6 +11,7 @@ ath9k-y += hw.o \ xmit.o \ rc.o +ath9k-$(CONFIG_PCI) += pci.o ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o obj-$(CONFIG_ATH9K) += ath9k.o diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index f9fa5c64c77b..1e86a9cbe42b 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -18,7 +18,7 @@ #define CORE_H #include -#include +#include #include #include #include @@ -767,4 +767,21 @@ static inline void ath_bus_cleanup(struct ath_softc *sc) sc->bus_ops->cleanup(sc); } +extern struct ieee80211_ops ath9k_ops; + +irqreturn_t ath_isr(int irq, void *dev); +void ath_cleanup(struct ath_softc *sc); +int ath_attach(u16 devid, struct ath_softc *sc); +void ath_detach(struct ath_softc *sc); +const char *ath_mac_bb_name(u32 mac_bb_version); +const char *ath_rf_name(u16 rf_version); + +#ifdef CONFIG_PCI +int ath_pci_init(void); +void ath_pci_exit(void); +#else +static inline int ath_pci_init(void) { return 0; }; +static inline void ath_pci_exit(void) {}; +#endif + #endif /* CORE_H */ diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index dd2be2644cad..6257790e49da 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -28,39 +28,6 @@ MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); -static struct pci_device_id ath_pci_id_table[] __devinitdata = { - { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ - { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ - { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ - { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ - { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ - { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ - { 0 } -}; - -static void ath_detach(struct ath_softc *sc); -static void ath_cleanup(struct ath_softc *sc); - -/* return bus cachesize in 4B word units */ - -static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz) -{ - u8 u8tmp; - - pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, - (u8 *)&u8tmp); - *csz = (int)u8tmp; - - /* - * This check was put in to avoid "unplesant" consequences if - * the bootrom has not fully initialized all PCI devices. - * Sometimes the cache line size register is not set - */ - - if (*csz == 0) - *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ -} - static void ath_cache_conf_rate(struct ath_softc *sc, struct ieee80211_conf *conf) { @@ -500,7 +467,7 @@ static void ath9k_tasklet(unsigned long data) ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask); } -static irqreturn_t ath_isr(int irq, void *dev) +irqreturn_t ath_isr(int irq, void *dev) { struct ath_softc *sc = dev; struct ath_hal *ah = sc->sc_ah; @@ -1279,7 +1246,7 @@ static int ath_start_rfkill_poll(struct ath_softc *sc) } #endif /* CONFIG_RFKILL */ -static void ath_cleanup(struct ath_softc *sc) +void ath_cleanup(struct ath_softc *sc) { ath_detach(sc); free_irq(sc->irq, sc); @@ -1287,7 +1254,7 @@ static void ath_cleanup(struct ath_softc *sc) ieee80211_free_hw(sc->hw); } -static void ath_detach(struct ath_softc *sc) +void ath_detach(struct ath_softc *sc) { struct ieee80211_hw *hw = sc->hw; int i = 0; @@ -1541,7 +1508,7 @@ static int ath_init(u16 devid, struct ath_softc *sc) return error; } -static int ath_attach(u16 devid, struct ath_softc *sc) +int ath_attach(u16 devid, struct ath_softc *sc) { struct ieee80211_hw *hw = sc->hw; int error = 0; @@ -2462,7 +2429,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, return ret; } -static struct ieee80211_ops ath9k_ops = { +struct ieee80211_ops ath9k_ops = { .tx = ath9k_tx, .start = ath9k_start, .stop = ath9k_stop, @@ -2506,7 +2473,7 @@ static struct { /* * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown. */ -static const char * +const char * ath_mac_bb_name(u32 mac_bb_version) { int i; @@ -2523,7 +2490,7 @@ ath_mac_bb_name(u32 mac_bb_version) /* * Return the RF name. "????" is returned if the RF is unknown. */ -static const char * +const char * ath_rf_name(u16 rf_version) { int i; @@ -2537,234 +2504,7 @@ ath_rf_name(u16 rf_version) return "????"; } -static void ath_pci_cleanup(struct ath_softc *sc) -{ - struct pci_dev *pdev = to_pci_dev(sc->dev); - - pci_iounmap(pdev, sc->mem); - pci_release_region(pdev, 0); - pci_disable_device(pdev); -} - -static struct ath_bus_ops ath_pci_bus_ops = { - .read_cachesize = ath_pci_read_cachesize, - .cleanup = ath_pci_cleanup, -}; - -static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - void __iomem *mem; - struct ath_softc *sc; - struct ieee80211_hw *hw; - u8 csz; - u32 val; - int ret = 0; - struct ath_hal *ah; - - if (pci_enable_device(pdev)) - return -EIO; - - ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - - if (ret) { - printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); - goto bad; - } - - ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - - if (ret) { - printk(KERN_ERR "ath9k: 32-bit DMA consistent " - "DMA enable failed\n"); - goto bad; - } - - /* - * Cache line size is used to size and align various - * structures used to communicate with the hardware. - */ - pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); - if (csz == 0) { - /* - * Linux 2.4.18 (at least) writes the cache line size - * register as a 16-bit wide register which is wrong. - * We must have this setup properly for rx buffer - * DMA to work so force a reasonable value here if it - * comes up zero. - */ - csz = L1_CACHE_BYTES / sizeof(u32); - pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); - } - /* - * The default setting of latency timer yields poor results, - * set it to the value used by other systems. It may be worth - * tweaking this setting more. - */ - pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); - - pci_set_master(pdev); - - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_read_config_dword(pdev, 0x40, &val); - if ((val & 0x0000ff00) != 0) - pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - - ret = pci_request_region(pdev, 0, "ath9k"); - if (ret) { - dev_err(&pdev->dev, "PCI memory region reserve error\n"); - ret = -ENODEV; - goto bad; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - printk(KERN_ERR "PCI memory map error\n") ; - ret = -EIO; - goto bad1; - } - - hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); - if (hw == NULL) { - printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n"); - goto bad2; - } - - SET_IEEE80211_DEV(hw, &pdev->dev); - pci_set_drvdata(pdev, hw); - - sc = hw->priv; - sc->hw = hw; - sc->dev = &pdev->dev; - sc->mem = mem; - sc->bus_ops = &ath_pci_bus_ops; - - if (ath_attach(id->device, sc) != 0) { - ret = -ENODEV; - goto bad3; - } - - /* setup interrupt service routine */ - - if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) { - printk(KERN_ERR "%s: request_irq failed\n", - wiphy_name(hw->wiphy)); - ret = -EIO; - goto bad4; - } - - sc->irq = pdev->irq; - - ah = sc->sc_ah; - printk(KERN_INFO - "%s: Atheros AR%s MAC/BB Rev:%x " - "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", - wiphy_name(hw->wiphy), - ath_mac_bb_name(ah->ah_macVersion), - ah->ah_macRev, - ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)), - ah->ah_phyRev, - (unsigned long)mem, pdev->irq); - - return 0; -bad4: - ath_detach(sc); -bad3: - ieee80211_free_hw(hw); -bad2: - pci_iounmap(pdev, mem); -bad1: - pci_release_region(pdev, 0); -bad: - pci_disable_device(pdev); - return ret; -} - -static void ath_pci_remove(struct pci_dev *pdev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath_softc *sc = hw->priv; - - ath_cleanup(sc); -} - -#ifdef CONFIG_PM - -static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath_softc *sc = hw->priv; - - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); - -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); -#endif - - pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - - return 0; -} - -static int ath_pci_resume(struct pci_dev *pdev) -{ - struct ieee80211_hw *hw = pci_get_drvdata(pdev); - struct ath_softc *sc = hw->priv; - u32 val; - int err; - - err = pci_enable_device(pdev); - if (err) - return err; - pci_restore_state(pdev); - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_read_config_dword(pdev, 0x40, &val); - if ((val & 0x0000ff00) != 0) - pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - - /* Enable LED */ - ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, - AR_GPIO_OUTPUT_MUX_AS_OUTPUT); - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); - -#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) - /* - * check the h/w rfkill state on resume - * and start the rfkill poll timer - */ - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) - queue_delayed_work(sc->hw->workqueue, - &sc->rf_kill.rfkill_poll, 0); -#endif - - return 0; -} - -#endif /* CONFIG_PM */ - -MODULE_DEVICE_TABLE(pci, ath_pci_id_table); - -static struct pci_driver ath_pci_driver = { - .name = "ath9k", - .id_table = ath_pci_id_table, - .probe = ath_pci_probe, - .remove = ath_pci_remove, -#ifdef CONFIG_PM - .suspend = ath_pci_suspend, - .resume = ath_pci_resume, -#endif /* CONFIG_PM */ -}; - -static int __init init_ath_pci(void) +static int __init ath9k_init(void) { int error; @@ -2776,26 +2516,30 @@ static int __init init_ath_pci(void) printk(KERN_ERR "Unable to register rate control algorithm: %d\n", error); - ath_rate_control_unregister(); - return error; + goto err_out; } - if (pci_register_driver(&ath_pci_driver) < 0) { + error = ath_pci_init(); + if (error < 0) { printk(KERN_ERR "ath_pci: No devices found, driver not installed.\n"); - ath_rate_control_unregister(); - pci_unregister_driver(&ath_pci_driver); - return -ENODEV; + error = -ENODEV; + goto err_rate_unregister; } return 0; + + err_rate_unregister: + ath_rate_control_unregister(); + err_out: + return error; } -module_init(init_ath_pci); +module_init(ath9k_init); -static void __exit exit_ath_pci(void) +static void __exit ath9k_exit(void) { + ath_pci_exit(); ath_rate_control_unregister(); - pci_unregister_driver(&ath_pci_driver); printk(KERN_INFO "%s: Driver unloaded\n", dev_info); } -module_exit(exit_ath_pci); +module_exit(ath9k_exit); diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c new file mode 100644 index 000000000000..4ff1caa9ba99 --- /dev/null +++ b/drivers/net/wireless/ath9k/pci.c @@ -0,0 +1,287 @@ +/* + * Copyright (c) 2008 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include "core.h" +#include "reg.h" +#include "hw.h" + +static struct pci_device_id ath_pci_id_table[] __devinitdata = { + { PCI_VDEVICE(ATHEROS, 0x0023) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ + { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ + { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ + { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ + { 0 } +}; + +/* return bus cachesize in 4B word units */ +static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz) +{ + u8 u8tmp; + + pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, + (u8 *)&u8tmp); + *csz = (int)u8tmp; + + /* + * This check was put in to avoid "unplesant" consequences if + * the bootrom has not fully initialized all PCI devices. + * Sometimes the cache line size register is not set + */ + + if (*csz == 0) + *csz = DEFAULT_CACHELINE >> 2; /* Use the default size */ +} + +static void ath_pci_cleanup(struct ath_softc *sc) +{ + struct pci_dev *pdev = to_pci_dev(sc->dev); + + pci_iounmap(pdev, sc->mem); + pci_release_region(pdev, 0); + pci_disable_device(pdev); +} + +static struct ath_bus_ops ath_pci_bus_ops = { + .read_cachesize = ath_pci_read_cachesize, + .cleanup = ath_pci_cleanup, +}; + +static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + void __iomem *mem; + struct ath_softc *sc; + struct ieee80211_hw *hw; + u8 csz; + u32 val; + int ret = 0; + struct ath_hal *ah; + + if (pci_enable_device(pdev)) + return -EIO; + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { + printk(KERN_ERR "ath9k: 32-bit DMA not available\n"); + goto bad; + } + + ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + + if (ret) { + printk(KERN_ERR "ath9k: 32-bit DMA consistent " + "DMA enable failed\n"); + goto bad; + } + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * Linux 2.4.18 (at least) writes the cache line size + * register as a 16-bit wide register which is wrong. + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = L1_CACHE_BYTES / sizeof(u32); + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + pci_set_master(pdev); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + ret = pci_request_region(pdev, 0, "ath9k"); + if (ret) { + dev_err(&pdev->dev, "PCI memory region reserve error\n"); + ret = -ENODEV; + goto bad; + } + + mem = pci_iomap(pdev, 0, 0); + if (!mem) { + printk(KERN_ERR "PCI memory map error\n") ; + ret = -EIO; + goto bad1; + } + + hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); + if (hw == NULL) { + printk(KERN_ERR "ath_pci: no memory for ieee80211_hw\n"); + goto bad2; + } + + SET_IEEE80211_DEV(hw, &pdev->dev); + pci_set_drvdata(pdev, hw); + + sc = hw->priv; + sc->hw = hw; + sc->dev = &pdev->dev; + sc->mem = mem; + sc->bus_ops = &ath_pci_bus_ops; + + if (ath_attach(id->device, sc) != 0) { + ret = -ENODEV; + goto bad3; + } + + /* setup interrupt service routine */ + + if (request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath", sc)) { + printk(KERN_ERR "%s: request_irq failed\n", + wiphy_name(hw->wiphy)); + ret = -EIO; + goto bad4; + } + + sc->irq = pdev->irq; + + ah = sc->sc_ah; + printk(KERN_INFO + "%s: Atheros AR%s MAC/BB Rev:%x " + "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n", + wiphy_name(hw->wiphy), + ath_mac_bb_name(ah->ah_macVersion), + ah->ah_macRev, + ath_rf_name((ah->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR)), + ah->ah_phyRev, + (unsigned long)mem, pdev->irq); + + return 0; +bad4: + ath_detach(sc); +bad3: + ieee80211_free_hw(hw); +bad2: + pci_iounmap(pdev, mem); +bad1: + pci_release_region(pdev, 0); +bad: + pci_disable_device(pdev); + return ret; +} + +static void ath_pci_remove(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + + ath_cleanup(sc); +} + +#ifdef CONFIG_PM + +static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + cancel_delayed_work_sync(&sc->rf_kill.rfkill_poll); +#endif + + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int ath_pci_resume(struct pci_dev *pdev) +{ + struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ath_softc *sc = hw->priv; + u32 val; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + pci_restore_state(pdev); + /* + * Suspend/Resume resets the PCI configuration space, so we have to + * re-disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state + */ + pci_read_config_dword(pdev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + + /* Enable LED */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) + /* + * check the h/w rfkill state on resume + * and start the rfkill poll timer + */ + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_RFSILENT) + queue_delayed_work(sc->hw->workqueue, + &sc->rf_kill.rfkill_poll, 0); +#endif + + return 0; +} + +#endif /* CONFIG_PM */ + +MODULE_DEVICE_TABLE(pci, ath_pci_id_table); + +static struct pci_driver ath_pci_driver = { + .name = "ath9k", + .id_table = ath_pci_id_table, + .probe = ath_pci_probe, + .remove = ath_pci_remove, +#ifdef CONFIG_PM + .suspend = ath_pci_suspend, + .resume = ath_pci_resume, +#endif /* CONFIG_PM */ +}; + +int __init ath_pci_init(void) +{ + return pci_register_driver(&ath_pci_driver); +} + +void ath_pci_exit(void) +{ + pci_unregister_driver(&ath_pci_driver); +} -- GitLab