From 695e00789a2703e79da9adf3cd868fe54142885e Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Apr 2012 15:34:00 +0000 Subject: [PATCH] net: remove ixp2000 ethernet driver The platform is removed, so there are no users of this driver. Signed-off-by: Rob Herring Cc: Jeff Kirsher Cc: Jesse Brandeburg Cc: Bruce Allan Cc: Carolyn Wyborny Cc: Don Skidmore Cc: Greg Rose Cc: Peter P Waskiewicz Jr Cc: Alex Duyck Cc: John Ronciak Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- MAINTAINERS | 6 - drivers/net/ethernet/intel/Kconfig | 2 +- drivers/net/ethernet/xscale/Kconfig | 6 +- drivers/net/ethernet/xscale/Makefile | 1 - drivers/net/ethernet/xscale/ixp2000/Kconfig | 6 - drivers/net/ethernet/xscale/ixp2000/Makefile | 3 - drivers/net/ethernet/xscale/ixp2000/caleb.c | 136 ------ drivers/net/ethernet/xscale/ixp2000/caleb.h | 22 - drivers/net/ethernet/xscale/ixp2000/enp2611.c | 232 ---------- .../net/ethernet/xscale/ixp2000/ixp2400-msf.c | 212 --------- .../net/ethernet/xscale/ixp2000/ixp2400-msf.h | 115 ----- .../net/ethernet/xscale/ixp2000/ixp2400_rx.uc | 408 ---------------- .../ethernet/xscale/ixp2000/ixp2400_rx.ucode | 130 ------ .../net/ethernet/xscale/ixp2000/ixp2400_tx.uc | 272 ----------- .../ethernet/xscale/ixp2000/ixp2400_tx.ucode | 98 ---- drivers/net/ethernet/xscale/ixp2000/ixpdev.c | 437 ------------------ drivers/net/ethernet/xscale/ixp2000/ixpdev.h | 29 -- .../net/ethernet/xscale/ixp2000/ixpdev_priv.h | 57 --- drivers/net/ethernet/xscale/ixp2000/pm3386.c | 351 -------------- drivers/net/ethernet/xscale/ixp2000/pm3386.h | 29 -- 20 files changed, 3 insertions(+), 2549 deletions(-) delete mode 100644 drivers/net/ethernet/xscale/ixp2000/Kconfig delete mode 100644 drivers/net/ethernet/xscale/ixp2000/Makefile delete mode 100644 drivers/net/ethernet/xscale/ixp2000/caleb.c delete mode 100644 drivers/net/ethernet/xscale/ixp2000/caleb.h delete mode 100644 drivers/net/ethernet/xscale/ixp2000/enp2611.c delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixpdev.c delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixpdev.h delete mode 100644 drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h delete mode 100644 drivers/net/ethernet/xscale/ixp2000/pm3386.c delete mode 100644 drivers/net/ethernet/xscale/ixp2000/pm3386.h diff --git a/MAINTAINERS b/MAINTAINERS index cae7438d963e..5ba74396af98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3516,12 +3516,6 @@ M: Deepak Saxena S: Maintained F: drivers/char/hw_random/ixp4xx-rng.c -INTEL IXP2000 ETHERNET DRIVER -M: Lennert Buytenhek -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/ethernet/xscale/ixp2000/ - INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf) M: Jeff Kirsher M: Jesse Brandeburg diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 90142aa398c6..74215c05d799 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -7,7 +7,7 @@ config NET_VENDOR_INTEL default y depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \ ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \ - GSC || BVME6000 || MVME16x || ARCH_ENP2611 || \ + GSC || BVME6000 || MVME16x || \ (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \ EXPERIMENTAL ---help--- diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig index cf67352cea14..3f431019e615 100644 --- a/drivers/net/ethernet/xscale/Kconfig +++ b/drivers/net/ethernet/xscale/Kconfig @@ -5,8 +5,8 @@ config NET_VENDOR_XSCALE bool "Intel XScale IXP devices" default y - depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \ - IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611) + depends on NET_VENDOR_INTEL && (ARM && ARCH_IXP4XX && \ + IXP4XX_NPE && IXP4XX_QMGR) ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from @@ -27,6 +27,4 @@ config IXP4XX_ETH Say Y here if you want to use built-in Ethernet ports on IXP4xx processor. -source "drivers/net/ethernet/xscale/ixp2000/Kconfig" - endif # NET_VENDOR_XSCALE diff --git a/drivers/net/ethernet/xscale/Makefile b/drivers/net/ethernet/xscale/Makefile index b195b9d7fe81..abc3b031fba7 100644 --- a/drivers/net/ethernet/xscale/Makefile +++ b/drivers/net/ethernet/xscale/Makefile @@ -2,5 +2,4 @@ # Makefile for the Intel XScale IXP device drivers. # -obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/ obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o diff --git a/drivers/net/ethernet/xscale/ixp2000/Kconfig b/drivers/net/ethernet/xscale/ixp2000/Kconfig deleted file mode 100644 index 58dbc5b876bc..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/Kconfig +++ /dev/null @@ -1,6 +0,0 @@ -config ENP2611_MSF_NET - tristate "Radisys ENP2611 MSF network interface support" - depends on ARCH_ENP2611 - ---help--- - This is a driver for the MSF network interface unit in - the IXP2400 on the Radisys ENP2611 platform. diff --git a/drivers/net/ethernet/xscale/ixp2000/Makefile b/drivers/net/ethernet/xscale/ixp2000/Makefile deleted file mode 100644 index fd38351ceaa7..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_ENP2611_MSF_NET) += enp2611_mod.o - -enp2611_mod-objs := caleb.o enp2611.o ixp2400-msf.o ixpdev.o pm3386.o diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.c b/drivers/net/ethernet/xscale/ixp2000/caleb.c deleted file mode 100644 index 7dea5b95012c..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/caleb.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include "caleb.h" - -#define CALEB_IDLO 0x00 -#define CALEB_IDHI 0x01 -#define CALEB_RID 0x02 -#define CALEB_RESET 0x03 -#define CALEB_INTREN0 0x04 -#define CALEB_INTREN1 0x05 -#define CALEB_INTRSTAT0 0x06 -#define CALEB_INTRSTAT1 0x07 -#define CALEB_PORTEN 0x08 -#define CALEB_BURST 0x09 -#define CALEB_PORTPAUS 0x0A -#define CALEB_PORTPAUSD 0x0B -#define CALEB_PHY0RX 0x10 -#define CALEB_PHY1RX 0x11 -#define CALEB_PHY0TX 0x12 -#define CALEB_PHY1TX 0x13 -#define CALEB_IXPRX_HI_CNTR 0x15 -#define CALEB_PHY0RX_HI_CNTR 0x16 -#define CALEB_PHY1RX_HI_CNTR 0x17 -#define CALEB_IXPRX_CNTR 0x18 -#define CALEB_PHY0RX_CNTR 0x19 -#define CALEB_PHY1RX_CNTR 0x1A -#define CALEB_IXPTX_CNTR 0x1B -#define CALEB_PHY0TX_CNTR 0x1C -#define CALEB_PHY1TX_CNTR 0x1D -#define CALEB_DEBUG0 0x1E -#define CALEB_DEBUG1 0x1F - - -static u8 caleb_reg_read(int reg) -{ - u8 value; - - value = *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)); - -// printk(KERN_INFO "caleb_reg_read(%d) = %.2x\n", reg, value); - - return value; -} - -static void caleb_reg_write(int reg, u8 value) -{ - u8 dummy; - -// printk(KERN_INFO "caleb_reg_write(%d, %.2x)\n", reg, value); - - *((volatile u8 *)(ENP2611_CALEB_VIRT_BASE + reg)) = value; - - dummy = *((volatile u8 *)ENP2611_CALEB_VIRT_BASE); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - - -void caleb_reset(void) -{ - /* - * Perform a chip reset. - */ - caleb_reg_write(CALEB_RESET, 0x02); - udelay(1); - - /* - * Enable all interrupt sources. This is needed to get - * meaningful results out of the status bits (register 6 - * and 7.) - */ - caleb_reg_write(CALEB_INTREN0, 0xff); - caleb_reg_write(CALEB_INTREN1, 0x07); - - /* - * Set RX and TX FIFO thresholds to 1.5kb. - */ - caleb_reg_write(CALEB_PHY0RX, 0x11); - caleb_reg_write(CALEB_PHY1RX, 0x11); - caleb_reg_write(CALEB_PHY0TX, 0x11); - caleb_reg_write(CALEB_PHY1TX, 0x11); - - /* - * Program SPI-3 burst size. - */ - caleb_reg_write(CALEB_BURST, 0); // 64-byte RBUF mpackets -// caleb_reg_write(CALEB_BURST, 1); // 128-byte RBUF mpackets -// caleb_reg_write(CALEB_BURST, 2); // 256-byte RBUF mpackets -} - -void caleb_enable_rx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp |= 1 << port; - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_disable_rx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp &= ~(1 << port); - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_enable_tx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp |= 1 << (port + 4); - caleb_reg_write(CALEB_PORTEN, temp); -} - -void caleb_disable_tx(int port) -{ - u8 temp; - - temp = caleb_reg_read(CALEB_PORTEN); - temp &= ~(1 << (port + 4)); - caleb_reg_write(CALEB_PORTEN, temp); -} diff --git a/drivers/net/ethernet/xscale/ixp2000/caleb.h b/drivers/net/ethernet/xscale/ixp2000/caleb.h deleted file mode 100644 index e93a1ef5b8a3..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/caleb.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Helper functions for the SPI-3 bridge FPGA on the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __CALEB_H -#define __CALEB_H - -void caleb_reset(void); -void caleb_enable_rx(int port); -void caleb_disable_rx(int port); -void caleb_enable_tx(int port); -void caleb_disable_tx(int port); - - -#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/enp2611.c b/drivers/net/ethernet/xscale/ixp2000/enp2611.c deleted file mode 100644 index 34a6cfd17930..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/enp2611.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * IXP2400 MSF network device driver for the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ixpdev.h" -#include "caleb.h" -#include "ixp2400-msf.h" -#include "pm3386.h" - -/*********************************************************************** - * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC - * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA - * to the IXP2400. - * - * +-------------+ - * SFP GBIC #0 ---+ | +---------+ - * | PM3386 #0 +-------+ | - * SFP GBIC #1 ---+ | | "Caleb" | +---------+ - * +-------------+ | | | | - * | SPI-3 +---------+ IXP2400 | - * +-------------+ | bridge | | | - * SFP GBIC #2 ---+ | | FPGA | +---------+ - * | PM3386 #1 +-------+ | - * | | +---------+ - * +-------------+ - * ^ ^ ^ - * | 1.25Gbaud | 104MHz | 104MHz - * | SERDES ea. | SPI-3 ea. | SPI-3 - * - ***********************************************************************/ -static struct ixp2400_msf_parameters enp2611_msf_parameters = -{ - .rx_mode = IXP2400_RX_MODE_UTOPIA_POS | - IXP2400_RX_MODE_1x32 | - IXP2400_RX_MODE_MPHY | - IXP2400_RX_MODE_MPHY_32 | - IXP2400_RX_MODE_MPHY_POLLED_STATUS | - IXP2400_RX_MODE_MPHY_LEVEL3 | - IXP2400_RX_MODE_RBUF_SIZE_64, - - .rxclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, - - .rx_poll_ports = 3, - - .rx_channel_mode = { - IXP2400_PORT_RX_MODE_MASTER | - IXP2400_PORT_RX_MODE_POS_PHY | - IXP2400_PORT_RX_MODE_POS_PHY_L3 | - IXP2400_PORT_RX_MODE_ODD_PARITY | - IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_RX_MODE_MASTER | - IXP2400_PORT_RX_MODE_POS_PHY | - IXP2400_PORT_RX_MODE_POS_PHY_L3 | - IXP2400_PORT_RX_MODE_ODD_PARITY | - IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_RX_MODE_MASTER | - IXP2400_PORT_RX_MODE_POS_PHY | - IXP2400_PORT_RX_MODE_POS_PHY_L3 | - IXP2400_PORT_RX_MODE_ODD_PARITY | - IXP2400_PORT_RX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_RX_MODE_MASTER | - IXP2400_PORT_RX_MODE_POS_PHY | - IXP2400_PORT_RX_MODE_POS_PHY_L3 | - IXP2400_PORT_RX_MODE_ODD_PARITY | - IXP2400_PORT_RX_MODE_2_CYCLE_DECODE - }, - - .tx_mode = IXP2400_TX_MODE_UTOPIA_POS | - IXP2400_TX_MODE_1x32 | - IXP2400_TX_MODE_MPHY | - IXP2400_TX_MODE_MPHY_32 | - IXP2400_TX_MODE_MPHY_POLLED_STATUS | - IXP2400_TX_MODE_MPHY_LEVEL3 | - IXP2400_TX_MODE_TBUF_SIZE_64, - - .txclk01_multiplier = IXP2400_PLL_MULTIPLIER_16, - - .tx_poll_ports = 3, - - .tx_channel_mode = { - IXP2400_PORT_TX_MODE_MASTER | - IXP2400_PORT_TX_MODE_POS_PHY | - IXP2400_PORT_TX_MODE_ODD_PARITY | - IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_TX_MODE_MASTER | - IXP2400_PORT_TX_MODE_POS_PHY | - IXP2400_PORT_TX_MODE_ODD_PARITY | - IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_TX_MODE_MASTER | - IXP2400_PORT_TX_MODE_POS_PHY | - IXP2400_PORT_TX_MODE_ODD_PARITY | - IXP2400_PORT_TX_MODE_2_CYCLE_DECODE, - - IXP2400_PORT_TX_MODE_MASTER | - IXP2400_PORT_TX_MODE_POS_PHY | - IXP2400_PORT_TX_MODE_ODD_PARITY | - IXP2400_PORT_TX_MODE_2_CYCLE_DECODE - } -}; - -static struct net_device *nds[3]; -static struct timer_list link_check_timer; - -/* @@@ Poll the SFP moddef0 line too. */ -/* @@@ Try to use the pm3386 DOOL interrupt as well. */ -static void enp2611_check_link_status(unsigned long __dummy) -{ - int i; - - for (i = 0; i < 3; i++) { - struct net_device *dev; - int status; - - dev = nds[i]; - if (dev == NULL) - continue; - - status = pm3386_is_link_up(i); - if (status && !netif_carrier_ok(dev)) { - /* @@@ Should report autonegotiation status. */ - printk(KERN_INFO "%s: NIC Link is Up\n", dev->name); - - pm3386_enable_tx(i); - caleb_enable_tx(i); - netif_carrier_on(dev); - } else if (!status && netif_carrier_ok(dev)) { - printk(KERN_INFO "%s: NIC Link is Down\n", dev->name); - - netif_carrier_off(dev); - caleb_disable_tx(i); - pm3386_disable_tx(i); - } - } - - link_check_timer.expires = jiffies + HZ / 10; - add_timer(&link_check_timer); -} - -static void enp2611_set_port_admin_status(int port, int up) -{ - if (up) { - caleb_enable_rx(port); - - pm3386_set_carrier(port, 1); - pm3386_enable_rx(port); - } else { - caleb_disable_tx(port); - pm3386_disable_tx(port); - /* @@@ Flush out pending packets. */ - pm3386_set_carrier(port, 0); - - pm3386_disable_rx(port); - caleb_disable_rx(port); - } -} - -static int __init enp2611_init_module(void) -{ - int ports; - int i; - - if (!machine_is_enp2611()) - return -ENODEV; - - caleb_reset(); - pm3386_reset(); - - ports = pm3386_port_count(); - for (i = 0; i < ports; i++) { - nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv)); - if (nds[i] == NULL) { - while (--i >= 0) - free_netdev(nds[i]); - return -ENOMEM; - } - - pm3386_init_port(i); - pm3386_get_mac(i, nds[i]->dev_addr); - } - - ixp2400_msf_init(&enp2611_msf_parameters); - - if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) { - for (i = 0; i < ports; i++) - if (nds[i]) - free_netdev(nds[i]); - return -EINVAL; - } - - init_timer(&link_check_timer); - link_check_timer.function = enp2611_check_link_status; - link_check_timer.expires = jiffies; - add_timer(&link_check_timer); - - return 0; -} - -static void __exit enp2611_cleanup_module(void) -{ - int i; - - del_timer_sync(&link_check_timer); - - ixpdev_deinit(); - for (i = 0; i < 3; i++) - free_netdev(nds[i]); -} - -module_init(enp2611_init_module); -module_exit(enp2611_cleanup_module); -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c deleted file mode 100644 index f5ffd7e05d26..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * Generic library functions for the MSF (Media and Switch Fabric) unit - * found on the Intel IXP2400 network processor. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include "ixp2400-msf.h" - -/* - * This is the Intel recommended PLL init procedure as described on - * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual. - */ -static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp) -{ - int rx_dual_clock; - int tx_dual_clock; - u32 value; - - /* - * If the RX mode is not 1x32, we have to enable both RX PLLs - * (#0 and #1.) The same thing for the TX direction. - */ - rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK); - tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK); - - /* - * Read initial value. - */ - value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL); - - /* - * Put PLLs in powerdown and bypass mode. - */ - value |= 0x0000f0f0; - ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); - - /* - * Set single or dual clock mode bits. - */ - value &= ~0x03000000; - value |= (rx_dual_clock << 24) | (tx_dual_clock << 25); - - /* - * Set multipliers. - */ - value &= ~0x00ff0000; - value |= mp->rxclk01_multiplier << 16; - value |= mp->rxclk23_multiplier << 18; - value |= mp->txclk01_multiplier << 20; - value |= mp->txclk23_multiplier << 22; - - /* - * And write value. - */ - ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); - - /* - * Disable PLL bypass mode. - */ - value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15); - ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); - - /* - * Turn on PLLs. - */ - value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7); - ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value); - - /* - * Wait for PLLs to lock. There are lock status bits, but IXP2400 - * erratum #65 says that these lock bits should not be relied upon - * as they might not accurately reflect the true state of the PLLs. - */ - udelay(100); -} - -/* - * Needed according to p480 of Programmer's Reference Manual. - */ -static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp) -{ - int size_bits; - int i; - - /* - * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer - * corruption) in the Intel-recommended way: do not add the RBUF - * elements susceptible to corruption to the freelist. - */ - size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK; - if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) { - for (i = 1; i < 128; i++) { - if (i == 9 || i == 18 || i == 27) - continue; - ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); - } - } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) { - for (i = 1; i < 64; i++) { - if (i == 4 || i == 9 || i == 13) - continue; - ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); - } - } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) { - for (i = 1; i < 32; i++) { - if (i == 2 || i == 4 || i == 6) - continue; - ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i); - } - } -} - -static u32 ixp2400_msf_valid_channels(u32 reg) -{ - u32 channels; - - channels = 0; - switch (reg & IXP2400_RX_MODE_WIDTH_MASK) { - case IXP2400_RX_MODE_1x32: - channels = 0x1; - if (reg & IXP2400_RX_MODE_MPHY && - !(reg & IXP2400_RX_MODE_MPHY_32)) - channels = 0xf; - break; - - case IXP2400_RX_MODE_2x16: - channels = 0x5; - break; - - case IXP2400_RX_MODE_4x8: - channels = 0xf; - break; - - case IXP2400_RX_MODE_1x16_2x8: - channels = 0xd; - break; - } - - return channels; -} - -static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp) -{ - u32 value; - - value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff; - value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28; - ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value); -} - -static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp) -{ - u32 value; - - value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff; - value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28; - ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value); -} - - -void ixp2400_msf_init(struct ixp2400_msf_parameters *mp) -{ - u32 value; - int i; - - /* - * Init the RX/TX PLLs based on the passed parameter block. - */ - ixp2400_pll_init(mp); - - /* - * Reset MSF. Bit 7 in IXP_RESET_0 resets the MSF. - */ - value = ixp2000_reg_read(IXP2000_RESET0); - ixp2000_reg_write(IXP2000_RESET0, value | 0x80); - ixp2000_reg_write(IXP2000_RESET0, value & ~0x80); - - /* - * Initialise the RX section. - */ - ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1); - ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode); - for (i = 0; i < 4; i++) { - ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i, - mp->rx_channel_mode[i]); - } - ixp2400_msf_free_rbuf_entries(mp); - ixp2400_msf_enable_rx(mp); - - /* - * Initialise the TX section. - */ - ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1); - ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode); - for (i = 0; i < 4; i++) { - ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i, - mp->tx_channel_mode[i]); - } - ixp2400_msf_enable_tx(mp); -} diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h b/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h deleted file mode 100644 index 3ac1af2771da..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Generic library functions for the MSF (Media and Switch Fabric) unit - * found on the Intel IXP2400 network processor. - * - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License as - * published by the Free Software Foundation; either version 2.1 of the - * License, or (at your option) any later version. - */ - -#ifndef __IXP2400_MSF_H -#define __IXP2400_MSF_H - -struct ixp2400_msf_parameters -{ - u32 rx_mode; - unsigned rxclk01_multiplier:2; - unsigned rxclk23_multiplier:2; - unsigned rx_poll_ports:6; - u32 rx_channel_mode[4]; - - u32 tx_mode; - unsigned txclk01_multiplier:2; - unsigned txclk23_multiplier:2; - unsigned tx_poll_ports:6; - u32 tx_channel_mode[4]; -}; - -void ixp2400_msf_init(struct ixp2400_msf_parameters *mp); - -#define IXP2400_PLL_MULTIPLIER_48 0x00 -#define IXP2400_PLL_MULTIPLIER_24 0x01 -#define IXP2400_PLL_MULTIPLIER_16 0x02 -#define IXP2400_PLL_MULTIPLIER_12 0x03 - -#define IXP2400_RX_MODE_CSIX 0x00400000 -#define IXP2400_RX_MODE_UTOPIA_POS 0x00000000 -#define IXP2400_RX_MODE_WIDTH_MASK 0x00300000 -#define IXP2400_RX_MODE_1x16_2x8 0x00300000 -#define IXP2400_RX_MODE_4x8 0x00200000 -#define IXP2400_RX_MODE_2x16 0x00100000 -#define IXP2400_RX_MODE_1x32 0x00000000 -#define IXP2400_RX_MODE_MPHY 0x00080000 -#define IXP2400_RX_MODE_SPHY 0x00000000 -#define IXP2400_RX_MODE_MPHY_32 0x00040000 -#define IXP2400_RX_MODE_MPHY_4 0x00000000 -#define IXP2400_RX_MODE_MPHY_POLLED_STATUS 0x00020000 -#define IXP2400_RX_MODE_MPHY_DIRECT_STATUS 0x00000000 -#define IXP2400_RX_MODE_CBUS_FULL_DUPLEX 0x00010000 -#define IXP2400_RX_MODE_CBUS_SIMPLEX 0x00000000 -#define IXP2400_RX_MODE_MPHY_LEVEL2 0x00004000 -#define IXP2400_RX_MODE_MPHY_LEVEL3 0x00000000 -#define IXP2400_RX_MODE_CBUS_8BIT 0x00002000 -#define IXP2400_RX_MODE_CBUS_4BIT 0x00000000 -#define IXP2400_RX_MODE_CSIX_SINGLE_FREELIST 0x00000200 -#define IXP2400_RX_MODE_CSIX_SPLIT_FREELISTS 0x00000000 -#define IXP2400_RX_MODE_RBUF_SIZE_MASK 0x0000000c -#define IXP2400_RX_MODE_RBUF_SIZE_256 0x00000008 -#define IXP2400_RX_MODE_RBUF_SIZE_128 0x00000004 -#define IXP2400_RX_MODE_RBUF_SIZE_64 0x00000000 - -#define IXP2400_PORT_RX_MODE_SLAVE 0x00000040 -#define IXP2400_PORT_RX_MODE_MASTER 0x00000000 -#define IXP2400_PORT_RX_MODE_POS_PHY_L3 0x00000020 -#define IXP2400_PORT_RX_MODE_POS_PHY_L2 0x00000000 -#define IXP2400_PORT_RX_MODE_POS_PHY 0x00000010 -#define IXP2400_PORT_RX_MODE_UTOPIA 0x00000000 -#define IXP2400_PORT_RX_MODE_EVEN_PARITY 0x0000000c -#define IXP2400_PORT_RX_MODE_ODD_PARITY 0x00000008 -#define IXP2400_PORT_RX_MODE_NO_PARITY 0x00000000 -#define IXP2400_PORT_RX_MODE_UTOPIA_BIG_CELLS 0x00000002 -#define IXP2400_PORT_RX_MODE_UTOPIA_NORMAL_CELLS 0x00000000 -#define IXP2400_PORT_RX_MODE_2_CYCLE_DECODE 0x00000001 -#define IXP2400_PORT_RX_MODE_1_CYCLE_DECODE 0x00000000 - -#define IXP2400_TX_MODE_CSIX 0x00400000 -#define IXP2400_TX_MODE_UTOPIA_POS 0x00000000 -#define IXP2400_TX_MODE_WIDTH_MASK 0x00300000 -#define IXP2400_TX_MODE_1x16_2x8 0x00300000 -#define IXP2400_TX_MODE_4x8 0x00200000 -#define IXP2400_TX_MODE_2x16 0x00100000 -#define IXP2400_TX_MODE_1x32 0x00000000 -#define IXP2400_TX_MODE_MPHY 0x00080000 -#define IXP2400_TX_MODE_SPHY 0x00000000 -#define IXP2400_TX_MODE_MPHY_32 0x00040000 -#define IXP2400_TX_MODE_MPHY_4 0x00000000 -#define IXP2400_TX_MODE_MPHY_POLLED_STATUS 0x00020000 -#define IXP2400_TX_MODE_MPHY_DIRECT_STATUS 0x00000000 -#define IXP2400_TX_MODE_CBUS_FULL_DUPLEX 0x00010000 -#define IXP2400_TX_MODE_CBUS_SIMPLEX 0x00000000 -#define IXP2400_TX_MODE_MPHY_LEVEL2 0x00004000 -#define IXP2400_TX_MODE_MPHY_LEVEL3 0x00000000 -#define IXP2400_TX_MODE_CBUS_8BIT 0x00002000 -#define IXP2400_TX_MODE_CBUS_4BIT 0x00000000 -#define IXP2400_TX_MODE_TBUF_SIZE_MASK 0x0000000c -#define IXP2400_TX_MODE_TBUF_SIZE_256 0x00000008 -#define IXP2400_TX_MODE_TBUF_SIZE_128 0x00000004 -#define IXP2400_TX_MODE_TBUF_SIZE_64 0x00000000 - -#define IXP2400_PORT_TX_MODE_SLAVE 0x00000040 -#define IXP2400_PORT_TX_MODE_MASTER 0x00000000 -#define IXP2400_PORT_TX_MODE_POS_PHY 0x00000010 -#define IXP2400_PORT_TX_MODE_UTOPIA 0x00000000 -#define IXP2400_PORT_TX_MODE_EVEN_PARITY 0x0000000c -#define IXP2400_PORT_TX_MODE_ODD_PARITY 0x00000008 -#define IXP2400_PORT_TX_MODE_NO_PARITY 0x00000000 -#define IXP2400_PORT_TX_MODE_UTOPIA_BIG_CELLS 0x00000002 -#define IXP2400_PORT_TX_MODE_2_CYCLE_DECODE 0x00000001 -#define IXP2400_PORT_TX_MODE_1_CYCLE_DECODE 0x00000000 - - -#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc deleted file mode 100644 index 42a73e357afa..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc +++ /dev/null @@ -1,408 +0,0 @@ -/* - * RX ucode for the Intel IXP2400 in POS-PHY mode. - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Assumptions made in this code: - * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where - * only one full element list is used. This includes, for example, - * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This - * is not an exhaustive list.) - * - The RBUF uses 64-byte mpackets. - * - RX descriptors reside in SRAM, and have the following format: - * struct rx_desc - * { - * // to uengine - * u32 buf_phys_addr; - * u32 buf_length; - * - * // from uengine - * u32 channel; - * u32 pkt_length; - * }; - * - Packet data resides in DRAM. - * - Packet buffer addresses are 8-byte aligned. - * - Scratch ring 0 is rx_pending. - * - Scratch ring 1 is rx_done, and has status condition 'full'. - * - The host triggers rx_done flush and rx_pending refill on seeing INTA. - * - This code is run on all eight threads of the microengine it runs on. - * - * Local memory is used for per-channel RX state. - */ - -#define RX_THREAD_FREELIST_0 0x0030 -#define RBUF_ELEMENT_DONE 0x0044 - -#define CHANNEL_FLAGS *l$index0[0] -#define CHANNEL_FLAG_RECEIVING 1 -#define PACKET_LENGTH *l$index0[1] -#define PACKET_CHECKSUM *l$index0[2] -#define BUFFER_HANDLE *l$index0[3] -#define BUFFER_START *l$index0[4] -#define BUFFER_LENGTH *l$index0[5] - -#define CHANNEL_STATE_SIZE 24 // in bytes -#define CHANNEL_STATE_SHIFT 5 // ceil(log2(state size)) - - - .sig volatile sig1 - .sig volatile sig2 - .sig volatile sig3 - - .sig mpacket_arrived - .reg add_to_rx_freelist - .reg read $rsw0, $rsw1 - .xfer_order $rsw0 $rsw1 - - .reg zero - - /* - * Initialise add_to_rx_freelist. - */ - .begin - .reg temp - .reg temp2 - - immed[add_to_rx_freelist, RX_THREAD_FREELIST_0] - immed_w1[add_to_rx_freelist, (&$rsw0 | (&mpacket_arrived << 12))] - - local_csr_rd[ACTIVE_CTX_STS] - immed[temp, 0] - alu[temp2, temp, and, 0x1f] - alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<20] - alu[temp2, temp, and, 0x80] - alu_shf[add_to_rx_freelist, add_to_rx_freelist, or, temp2, <<18] - .end - - immed[zero, 0] - - /* - * Skip context 0 initialisation? - */ - .begin - br!=ctx[0, mpacket_receive_loop#] - .end - - /* - * Initialise local memory. - */ - .begin - .reg addr - .reg temp - - immed[temp, 0] - init_local_mem_loop#: - alu_shf[addr, --, b, temp, <>8] - bne[abort_rswerr#] - .end - - /* - * Point local memory pointer to this channel's state area. - */ - .begin - .reg chanaddr - - alu[chanaddr, $rsw0, and, 0x1f] - alu_shf[chanaddr, --, b, chanaddr, < abort) If everything's - * okay, update the RECEIVING flag to reflect our new state. - */ - .begin - .reg temp - .reg eop - - #if CHANNEL_FLAG_RECEIVING != 1 - #error CHANNEL_FLAG_RECEIVING is not 1 - #endif - - alu_shf[temp, 1, and, $rsw0, >>15] - alu[temp, temp, xor, CHANNEL_FLAGS] - alu[--, temp, and, CHANNEL_FLAG_RECEIVING] - beq[abort_proterr#] - - alu_shf[eop, 1, and, $rsw0, >>14] - alu[CHANNEL_FLAGS, temp, xor, eop] - .end - - /* - * Copy the mpacket into the right spot, and in case of EOP, - * write back the descriptor and pass the packet on. - */ - .begin - .reg buffer_offset - .reg _packet_length - .reg _packet_checksum - .reg _buffer_handle - .reg _buffer_start - .reg _buffer_length - - /* - * Determine buffer_offset, _packet_length and - * _packet_checksum. - */ - .begin - .reg temp - - alu[--, 1, and, $rsw0, >>15] - beq[not_sop#] - - immed[PACKET_LENGTH, 0] - immed[PACKET_CHECKSUM, 0] - - not_sop#: - alu[buffer_offset, --, b, PACKET_LENGTH] - alu_shf[temp, 0xff, and, $rsw0, >>16] - alu[_packet_length, buffer_offset, +, temp] - alu[PACKET_LENGTH, --, b, _packet_length] - - immed[temp, 0xffff] - alu[temp, $rsw1, and, temp] - alu[_packet_checksum, PACKET_CHECKSUM, +, temp] - alu[PACKET_CHECKSUM, --, b, _packet_checksum] - .end - - /* - * Allocate buffer in case of SOP. - */ - .begin - .reg temp - - alu[temp, 1, and, $rsw0, >>15] - beq[skip_buffer_alloc#] - - .begin - .sig zzz - .reg read $stemp $stemp2 - .xfer_order $stemp $stemp2 - - rx_nobufs#: - scratch[get, $stemp, zero, 0, 1], ctx_swap[zzz] - alu[_buffer_handle, --, b, $stemp] - beq[rx_nobufs#] - - sram[read, $stemp, _buffer_handle, 0, 2], - ctx_swap[zzz] - alu[_buffer_start, --, b, $stemp] - alu[_buffer_length, --, b, $stemp2] - .end - - skip_buffer_alloc#: - .end - - /* - * Resynchronise. - */ - .begin - ctx_arb[sig2] - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] - .end - - /* - * Synchronise buffer state. - */ - .begin - .reg temp - - alu[temp, 1, and, $rsw0, >>15] - beq[copy_from_local_mem#] - - alu[BUFFER_HANDLE, --, b, _buffer_handle] - alu[BUFFER_START, --, b, _buffer_start] - alu[BUFFER_LENGTH, --, b, _buffer_length] - br[sync_state_done#] - - copy_from_local_mem#: - alu[_buffer_handle, --, b, BUFFER_HANDLE] - alu[_buffer_start, --, b, BUFFER_START] - alu[_buffer_length, --, b, BUFFER_LENGTH] - - sync_state_done#: - .end - -#if 0 - /* - * Debug buffer state management. - */ - .begin - .reg temp - - alu[temp, 1, and, $rsw0, >>14] - beq[no_poison#] - immed[BUFFER_HANDLE, 0xdead] - immed[BUFFER_START, 0xdead] - immed[BUFFER_LENGTH, 0xdead] - no_poison#: - - immed[temp, 0xdead] - alu[--, _buffer_handle, -, temp] - beq[state_corrupted#] - alu[--, _buffer_start, -, temp] - beq[state_corrupted#] - alu[--, _buffer_length, -, temp] - beq[state_corrupted#] - .end -#endif - - /* - * Check buffer length. - */ - .begin - alu[--, _buffer_length, -, _packet_length] - blo[buffer_overflow#] - .end - - /* - * Copy the mpacket and give back the RBUF element. - */ - .begin - .reg element - .reg xfer_size - .reg temp - .sig copy_sig - - alu_shf[element, 0x7f, and, $rsw0, >>24] - alu_shf[xfer_size, 0xff, and, $rsw0, >>16] - - alu[xfer_size, xfer_size, -, 1] - alu_shf[xfer_size, 0x10, or, xfer_size, >>3] - alu_shf[temp, 0x10, or, xfer_size, <<21] - alu_shf[temp, temp, or, element, <<11] - alu_shf[--, temp, or, 1, <<18] - - dram[rbuf_rd, --, _buffer_start, buffer_offset, max_8], - indirect_ref, sig_done[copy_sig] - ctx_arb[copy_sig] - - alu[temp, RBUF_ELEMENT_DONE, or, element, <<16] - msf[fast_wr, --, temp, 0] - .end - - /* - * If EOP, write back the packet descriptor. - */ - .begin - .reg write $stemp $stemp2 - .xfer_order $stemp $stemp2 - .sig zzz - - alu_shf[--, 1, and, $rsw0, >>14] - beq[no_writeback#] - - alu[$stemp, $rsw0, and, 0x1f] - alu[$stemp2, --, b, _packet_length] - sram[write, $stemp, _buffer_handle, 8, 2], ctx_swap[zzz] - - no_writeback#: - .end - - /* - * Resynchronise. - */ - .begin - ctx_arb[sig3] - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] - .end - - /* - * If EOP, put the buffer back onto the scratch ring. - */ - .begin - .reg write $stemp - .sig zzz - - br_inp_state[SCR_Ring1_Status, rx_done_ring_overflow#] - - alu_shf[--, 1, and, $rsw0, >>14] - beq[mpacket_receive_loop#] - - alu[--, 1, and, $rsw0, >>10] - bne[rxerr#] - - alu[$stemp, --, b, _buffer_handle] - scratch[put, $stemp, zero, 4, 1], ctx_swap[zzz] - cap[fast_wr, 0, XSCALE_INT_A] - br[mpacket_receive_loop#] - - rxerr#: - alu[$stemp, --, b, _buffer_handle] - scratch[put, $stemp, zero, 0, 1], ctx_swap[zzz] - br[mpacket_receive_loop#] - .end - .end - - -abort_rswerr#: - halt - -abort_proterr#: - halt - -state_corrupted#: - halt - -buffer_overflow#: - halt - -rx_done_ring_overflow#: - halt - - diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode deleted file mode 100644 index e8aee2f81aad..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode +++ /dev/null @@ -1,130 +0,0 @@ -static struct ixp2000_uengine_code ixp2400_rx = -{ - .cpu_model_bitmask = 0x000003fe, - .cpu_min_revision = 0, - .cpu_max_revision = 255, - - .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | - IXP2000_UENGINE_PRN_UPDATE_EVERY | - IXP2000_UENGINE_NN_FROM_PREVIOUS | - IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | - IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | - IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, - - .initial_reg_values = (struct ixp2000_reg_value []) { - { -1, -1 } - }, - - .num_insns = 109, - .insns = (u8 []) { - 0xf0, 0x00, 0x0c, 0xc0, 0x05, - 0xf4, 0x44, 0x0c, 0x00, 0x05, - 0xfc, 0x04, 0x4c, 0x00, 0x00, - 0xf0, 0x00, 0x00, 0x3b, 0x00, - 0xb4, 0x40, 0xf0, 0x3b, 0x1f, - 0x8a, 0xc0, 0x50, 0x3e, 0x05, - 0xb4, 0x40, 0xf0, 0x3b, 0x80, - 0x9a, 0xe0, 0x00, 0x3e, 0x05, - 0xf0, 0x00, 0x00, 0x07, 0x00, - 0xd8, 0x05, 0xc0, 0x00, 0x11, - 0xf0, 0x00, 0x00, 0x0f, 0x00, - 0x91, 0xb0, 0x20, 0x0e, 0x00, - 0xfc, 0x06, 0x60, 0x0b, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0xf0, 0x00, 0x0c, 0x02, 0x00, - 0xb0, 0xc0, 0x30, 0x0f, 0x01, - 0xa4, 0x70, 0x00, 0x0f, 0x20, - 0xd8, 0x02, 0xc0, 0x01, 0x00, - 0xfc, 0x10, 0xac, 0x23, 0x08, - 0xfc, 0x10, 0xac, 0x43, 0x10, - 0xfc, 0x10, 0xac, 0x63, 0x18, - 0xe0, 0x00, 0x00, 0x00, 0x02, - 0xfc, 0x10, 0xae, 0x23, 0x88, - 0x3d, 0x00, 0x04, 0x03, 0x20, - 0xe0, 0x00, 0x00, 0x00, 0x10, - 0x84, 0x82, 0x02, 0x01, 0x3b, - 0xd8, 0x1a, 0x00, 0x01, 0x01, - 0xb4, 0x00, 0x8c, 0x7d, 0x80, - 0x91, 0xb0, 0x80, 0x22, 0x00, - 0xfc, 0x06, 0x60, 0x23, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0xf0, 0x00, 0x0c, 0x03, 0x00, - 0x94, 0xf0, 0x92, 0x01, 0x21, - 0xac, 0x40, 0x60, 0x26, 0x00, - 0xa4, 0x30, 0x0c, 0x04, 0x06, - 0xd8, 0x1a, 0x40, 0x01, 0x00, - 0x94, 0xe0, 0xa2, 0x01, 0x21, - 0xac, 0x20, 0x00, 0x28, 0x06, - 0x84, 0xf2, 0x02, 0x01, 0x21, - 0xd8, 0x0b, 0x40, 0x01, 0x00, - 0xf0, 0x00, 0x0c, 0x02, 0x01, - 0xf0, 0x00, 0x0c, 0x02, 0x02, - 0xa0, 0x00, 0x08, 0x04, 0x00, - 0x95, 0x00, 0xc6, 0x01, 0xff, - 0xa0, 0x80, 0x10, 0x30, 0x00, - 0xa0, 0x60, 0x1c, 0x00, 0x01, - 0xf0, 0x0f, 0xf0, 0x33, 0xff, - 0xb4, 0x00, 0xc0, 0x31, 0x81, - 0xb0, 0x80, 0xb0, 0x32, 0x02, - 0xa0, 0x20, 0x20, 0x2c, 0x00, - 0x94, 0xf0, 0xd2, 0x01, 0x21, - 0xd8, 0x0f, 0x40, 0x01, 0x00, - 0x19, 0x40, 0x10, 0x04, 0x20, - 0xa0, 0x00, 0x26, 0x04, 0x00, - 0xd8, 0x0d, 0xc0, 0x01, 0x00, - 0x00, 0x42, 0x10, 0x80, 0x02, - 0xb0, 0x00, 0x46, 0x04, 0x00, - 0xb0, 0x00, 0x56, 0x08, 0x00, - 0xe0, 0x00, 0x00, 0x00, 0x04, - 0xfc, 0x10, 0xae, 0x43, 0x90, - 0x84, 0xf0, 0x32, 0x01, 0x21, - 0xd8, 0x11, 0x40, 0x01, 0x00, - 0xa0, 0x60, 0x3c, 0x00, 0x02, - 0xa0, 0x20, 0x40, 0x10, 0x00, - 0xa0, 0x20, 0x50, 0x14, 0x00, - 0xd8, 0x12, 0x00, 0x00, 0x18, - 0xa0, 0x00, 0x28, 0x0c, 0x00, - 0xb0, 0x00, 0x48, 0x10, 0x00, - 0xb0, 0x00, 0x58, 0x14, 0x00, - 0xaa, 0xf0, 0x00, 0x14, 0x01, - 0xd8, 0x1a, 0xc0, 0x01, 0x05, - 0x85, 0x80, 0x42, 0x01, 0xff, - 0x95, 0x00, 0x66, 0x01, 0xff, - 0xba, 0xc0, 0x60, 0x1b, 0x01, - 0x9a, 0x30, 0x60, 0x19, 0x30, - 0x9a, 0xb0, 0x70, 0x1a, 0x30, - 0x9b, 0x50, 0x78, 0x1e, 0x04, - 0x8a, 0xe2, 0x08, 0x1e, 0x21, - 0x6a, 0x4e, 0x00, 0x13, 0x00, - 0xe0, 0x00, 0x00, 0x00, 0x30, - 0x9b, 0x00, 0x7a, 0x92, 0x04, - 0x3d, 0x00, 0x04, 0x1f, 0x20, - 0x84, 0xe2, 0x02, 0x01, 0x21, - 0xd8, 0x16, 0x80, 0x01, 0x00, - 0xa4, 0x18, 0x0c, 0x7d, 0x80, - 0xa0, 0x58, 0x1c, 0x00, 0x01, - 0x01, 0x42, 0x00, 0xa0, 0x02, - 0xe0, 0x00, 0x00, 0x00, 0x08, - 0xfc, 0x10, 0xae, 0x63, 0x98, - 0xd8, 0x1b, 0x00, 0xc2, 0x14, - 0x84, 0xe2, 0x02, 0x01, 0x21, - 0xd8, 0x05, 0xc0, 0x01, 0x00, - 0x84, 0xa2, 0x02, 0x01, 0x21, - 0xd8, 0x19, 0x40, 0x01, 0x01, - 0xa0, 0x58, 0x0c, 0x00, 0x02, - 0x1a, 0x40, 0x00, 0x04, 0x24, - 0x33, 0x00, 0x01, 0x2f, 0x20, - 0xd8, 0x05, 0xc0, 0x00, 0x18, - 0xa0, 0x58, 0x0c, 0x00, 0x02, - 0x1a, 0x40, 0x00, 0x04, 0x20, - 0xd8, 0x05, 0xc0, 0x00, 0x18, - 0xe0, 0x00, 0x02, 0x00, 0x00, - 0xe0, 0x00, 0x02, 0x00, 0x00, - 0xe0, 0x00, 0x02, 0x00, 0x00, - 0xe0, 0x00, 0x02, 0x00, 0x00, - 0xe0, 0x00, 0x02, 0x00, 0x00, - } -}; diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc deleted file mode 100644 index d090d1884fb7..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc +++ /dev/null @@ -1,272 +0,0 @@ -/* - * TX ucode for the Intel IXP2400 in POS-PHY mode. - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Assumptions made in this code: - * - The IXP2400 MSF is configured for POS-PHY mode, in a mode where - * only one TBUF partition is used. This includes, for example, - * 1x32 SPHY and 1x32 MPHY32, but not 4x8 SPHY or 1x32 MPHY4. (This - * is not an exhaustive list.) - * - The TBUF uses 64-byte mpackets. - * - TX descriptors reside in SRAM, and have the following format: - * struct tx_desc - * { - * // to uengine - * u32 buf_phys_addr; - * u32 pkt_length; - * u32 channel; - * }; - * - Packet data resides in DRAM. - * - Packet buffer addresses are 8-byte aligned. - * - Scratch ring 2 is tx_pending. - * - Scratch ring 3 is tx_done, and has status condition 'full'. - * - This code is run on all eight threads of the microengine it runs on. - */ - -#define TX_SEQUENCE_0 0x0060 -#define TBUF_CTRL 0x1800 - -#define PARTITION_SIZE 128 -#define PARTITION_THRESH 96 - - - .sig volatile sig1 - .sig volatile sig2 - .sig volatile sig3 - - .reg @old_tx_seq_0 - .reg @mpkts_in_flight - .reg @next_tbuf_mpacket - - .reg @buffer_handle - .reg @buffer_start - .reg @packet_length - .reg @channel - .reg @packet_offset - - .reg zero - - immed[zero, 0] - - /* - * Skip context 0 initialisation? - */ - .begin - br!=ctx[0, mpacket_tx_loop#] - .end - - /* - * Wait until all pending TBUF elements have been transmitted. - */ - .begin - .reg read $tx - .sig zzz - - loop_empty#: - msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] - alu_shf[--, --, b, $tx, >>31] - beq[loop_empty#] - - alu[@old_tx_seq_0, --, b, $tx] - .end - - immed[@mpkts_in_flight, 0] - alu[@next_tbuf_mpacket, @old_tx_seq_0, and, (PARTITION_SIZE - 1)] - - immed[@buffer_handle, 0] - - /* - * Initialise signal pipeline. - */ - .begin - local_csr_wr[SAME_ME_SIGNAL, (&sig1 << 3)] - .set_sig sig1 - - local_csr_wr[SAME_ME_SIGNAL, (&sig2 << 3)] - .set_sig sig2 - - local_csr_wr[SAME_ME_SIGNAL, (&sig3 << 3)] - .set_sig sig3 - .end - -mpacket_tx_loop#: - .begin - .reg tbuf_element_index - .reg buffer_handle - .reg sop_eop - .reg packet_data - .reg channel - .reg mpacket_size - - /* - * If there is no packet currently being transmitted, - * dequeue the next TX descriptor, and fetch the buffer - * address, packet length and destination channel number. - */ - .begin - .reg read $stemp $stemp2 $stemp3 - .xfer_order $stemp $stemp2 $stemp3 - .sig zzz - - ctx_arb[sig1] - - alu[--, --, b, @buffer_handle] - bne[already_got_packet#] - - tx_nobufs#: - scratch[get, $stemp, zero, 8, 1], ctx_swap[zzz] - alu[@buffer_handle, --, b, $stemp] - beq[tx_nobufs#] - - sram[read, $stemp, $stemp, 0, 3], ctx_swap[zzz] - alu[@buffer_start, --, b, $stemp] - alu[@packet_length, --, b, $stemp2] - beq[zero_byte_packet#] - alu[@channel, --, b, $stemp3] - immed[@packet_offset, 0] - - already_got_packet#: - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig1 << 3))] - .end - - /* - * Determine tbuf element index, SOP/EOP flags, mpacket - * offset and mpacket size and cache buffer_handle and - * channel number. - */ - .begin - alu[tbuf_element_index, --, b, @next_tbuf_mpacket] - alu[@next_tbuf_mpacket, @next_tbuf_mpacket, +, 1] - alu[@next_tbuf_mpacket, @next_tbuf_mpacket, and, - (PARTITION_SIZE - 1)] - - alu[buffer_handle, --, b, @buffer_handle] - immed[@buffer_handle, 0] - - immed[sop_eop, 1] - - alu[packet_data, --, b, @packet_offset] - bne[no_sop#] - alu[sop_eop, sop_eop, or, 2] - no_sop#: - alu[packet_data, packet_data, +, @buffer_start] - - alu[channel, --, b, @channel] - - alu[mpacket_size, @packet_length, -, @packet_offset] - alu[--, 64, -, mpacket_size] - bhs[eop#] - alu[@buffer_handle, --, b, buffer_handle] - immed[mpacket_size, 64] - alu[sop_eop, sop_eop, and, 2] - eop#: - - alu[@packet_offset, @packet_offset, +, mpacket_size] - .end - - /* - * Wait until there's enough space in the TBUF. - */ - .begin - .reg read $tx - .reg temp - .sig zzz - - ctx_arb[sig2] - - br[test_space#] - - loop_space#: - msf[read, $tx, zero, TX_SEQUENCE_0, 1], ctx_swap[zzz] - - alu[temp, $tx, -, @old_tx_seq_0] - alu[temp, temp, and, 0xff] - alu[@mpkts_in_flight, @mpkts_in_flight, -, temp] - - alu[@old_tx_seq_0, --, b, $tx] - - test_space#: - alu[--, PARTITION_THRESH, -, @mpkts_in_flight] - blo[loop_space#] - - alu[@mpkts_in_flight, @mpkts_in_flight, +, 1] - - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig2 << 3))] - .end - - /* - * Copy the packet data to the TBUF. - */ - .begin - .reg temp - .sig copy_sig - - alu[temp, mpacket_size, -, 1] - alu_shf[temp, 0x10, or, temp, >>3] - alu_shf[temp, 0x10, or, temp, <<21] - alu_shf[temp, temp, or, tbuf_element_index, <<11] - alu_shf[--, temp, or, 1, <<18] - - dram[tbuf_wr, --, packet_data, 0, max_8], - indirect_ref, sig_done[copy_sig] - ctx_arb[copy_sig] - .end - - /* - * Mark TBUF element as ready-to-be-transmitted. - */ - .begin - .reg write $tsw $tsw2 - .xfer_order $tsw $tsw2 - .reg temp - .sig zzz - - alu_shf[temp, channel, or, mpacket_size, <<24] - alu_shf[$tsw, temp, or, sop_eop, <<8] - immed[$tsw2, 0] - - immed[temp, TBUF_CTRL] - alu_shf[temp, temp, or, tbuf_element_index, <<3] - msf[write, $tsw, temp, 0, 2], ctx_swap[zzz] - .end - - /* - * Resynchronise. - */ - .begin - ctx_arb[sig3] - local_csr_wr[SAME_ME_SIGNAL, (0x80 | (&sig3 << 3))] - .end - - /* - * If this was an EOP mpacket, recycle the TX buffer - * and signal the host. - */ - .begin - .reg write $stemp - .sig zzz - - alu[--, sop_eop, and, 1] - beq[mpacket_tx_loop#] - - tx_done_ring_full#: - br_inp_state[SCR_Ring3_Status, tx_done_ring_full#] - - alu[$stemp, --, b, buffer_handle] - scratch[put, $stemp, zero, 12, 1], ctx_swap[zzz] - cap[fast_wr, 0, XSCALE_INT_A] - br[mpacket_tx_loop#] - .end - .end - - -zero_byte_packet#: - halt - - diff --git a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode b/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode deleted file mode 100644 index a433e24b0a51..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode +++ /dev/null @@ -1,98 +0,0 @@ -static struct ixp2000_uengine_code ixp2400_tx = -{ - .cpu_model_bitmask = 0x000003fe, - .cpu_min_revision = 0, - .cpu_max_revision = 255, - - .uengine_parameters = IXP2000_UENGINE_8_CONTEXTS | - IXP2000_UENGINE_PRN_UPDATE_EVERY | - IXP2000_UENGINE_NN_FROM_PREVIOUS | - IXP2000_UENGINE_ASSERT_EMPTY_AT_0 | - IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT | - IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT, - - .initial_reg_values = (struct ixp2000_reg_value []) { - { -1, -1 } - }, - - .num_insns = 77, - .insns = (u8 []) { - 0xf0, 0x00, 0x00, 0x07, 0x00, - 0xd8, 0x03, 0x00, 0x00, 0x11, - 0x3c, 0x40, 0x00, 0x04, 0xe0, - 0x81, 0xf2, 0x02, 0x01, 0x00, - 0xd8, 0x00, 0x80, 0x01, 0x00, - 0xb0, 0x08, 0x06, 0x00, 0x00, - 0xf0, 0x00, 0x0c, 0x00, 0x80, - 0xb4, 0x49, 0x02, 0x03, 0x7f, - 0xf0, 0x00, 0x02, 0x83, 0x00, - 0xfc, 0x10, 0xac, 0x23, 0x08, - 0xfc, 0x10, 0xac, 0x43, 0x10, - 0xfc, 0x10, 0xac, 0x63, 0x18, - 0xe0, 0x00, 0x00, 0x00, 0x02, - 0xa0, 0x30, 0x02, 0x80, 0x00, - 0xd8, 0x06, 0x00, 0x01, 0x01, - 0x19, 0x40, 0x00, 0x04, 0x28, - 0xb0, 0x0a, 0x06, 0x00, 0x00, - 0xd8, 0x03, 0xc0, 0x01, 0x00, - 0x00, 0x44, 0x00, 0x80, 0x80, - 0xa0, 0x09, 0x06, 0x00, 0x00, - 0xb0, 0x0b, 0x06, 0x04, 0x00, - 0xd8, 0x13, 0x00, 0x01, 0x00, - 0xb0, 0x0c, 0x06, 0x08, 0x00, - 0xf0, 0x00, 0x0c, 0x00, 0xa0, - 0xfc, 0x10, 0xae, 0x23, 0x88, - 0xa0, 0x00, 0x12, 0x40, 0x00, - 0xb0, 0xc9, 0x02, 0x43, 0x01, - 0xb4, 0x49, 0x02, 0x43, 0x7f, - 0xb0, 0x00, 0x22, 0x80, 0x00, - 0xf0, 0x00, 0x02, 0x83, 0x00, - 0xf0, 0x00, 0x0c, 0x04, 0x02, - 0xb0, 0x40, 0x6c, 0x00, 0xa0, - 0xd8, 0x08, 0x80, 0x01, 0x01, - 0xaa, 0x00, 0x2c, 0x08, 0x02, - 0xa0, 0xc0, 0x30, 0x18, 0x90, - 0xa0, 0x00, 0x43, 0x00, 0x00, - 0xba, 0xc0, 0x32, 0xc0, 0xa0, - 0xaa, 0xb0, 0x00, 0x0f, 0x40, - 0xd8, 0x0a, 0x80, 0x01, 0x04, - 0xb0, 0x0a, 0x00, 0x08, 0x00, - 0xf0, 0x00, 0x00, 0x0f, 0x40, - 0xa4, 0x00, 0x2c, 0x08, 0x02, - 0xa0, 0x8a, 0x00, 0x0c, 0xa0, - 0xe0, 0x00, 0x00, 0x00, 0x04, - 0xd8, 0x0c, 0x80, 0x00, 0x18, - 0x3c, 0x40, 0x00, 0x04, 0xe0, - 0xba, 0x80, 0x42, 0x01, 0x80, - 0xb4, 0x40, 0x40, 0x13, 0xff, - 0xaa, 0x88, 0x00, 0x10, 0x80, - 0xb0, 0x08, 0x06, 0x00, 0x00, - 0xaa, 0xf0, 0x0d, 0x80, 0x80, - 0xd8, 0x0b, 0x40, 0x01, 0x05, - 0xa0, 0x88, 0x0c, 0x04, 0x80, - 0xfc, 0x10, 0xae, 0x43, 0x90, - 0xba, 0xc0, 0x50, 0x0f, 0x01, - 0x9a, 0x30, 0x50, 0x15, 0x30, - 0x9a, 0xb0, 0x50, 0x16, 0x30, - 0x9b, 0x50, 0x58, 0x16, 0x01, - 0x8a, 0xe2, 0x08, 0x16, 0x21, - 0x6b, 0x4e, 0x00, 0x83, 0x03, - 0xe0, 0x00, 0x00, 0x00, 0x30, - 0x9a, 0x80, 0x70, 0x0e, 0x04, - 0x8b, 0x88, 0x08, 0x1e, 0x02, - 0xf0, 0x00, 0x0c, 0x01, 0x81, - 0xf0, 0x01, 0x80, 0x1f, 0x00, - 0x9b, 0xd0, 0x78, 0x1e, 0x01, - 0x3d, 0x42, 0x00, 0x1c, 0x20, - 0xe0, 0x00, 0x00, 0x00, 0x08, - 0xfc, 0x10, 0xae, 0x63, 0x98, - 0xa4, 0x30, 0x0c, 0x04, 0x02, - 0xd8, 0x03, 0x00, 0x01, 0x00, - 0xd8, 0x11, 0xc1, 0x42, 0x14, - 0xa0, 0x18, 0x00, 0x08, 0x00, - 0x1a, 0x40, 0x00, 0x04, 0x2c, - 0x33, 0x00, 0x01, 0x2f, 0x20, - 0xd8, 0x03, 0x00, 0x00, 0x18, - 0xe0, 0x00, 0x02, 0x00, 0x00, - } -}; diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.c b/drivers/net/ethernet/xscale/ixp2000/ixpdev.c deleted file mode 100644 index 45008377c8bf..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixpdev.c +++ /dev/null @@ -1,437 +0,0 @@ -/* - * IXP2000 MSF network device driver - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ixp2400_rx.ucode" -#include "ixp2400_tx.ucode" -#include "ixpdev_priv.h" -#include "ixpdev.h" -#include "pm3386.h" - -#define DRV_MODULE_VERSION "0.2" - -static int nds_count; -static struct net_device **nds; -static int nds_open; -static void (*set_port_admin_status)(int port, int up); - -static struct ixpdev_rx_desc * const rx_desc = - (struct ixpdev_rx_desc *)(IXP2000_SRAM0_VIRT_BASE + RX_BUF_DESC_BASE); -static struct ixpdev_tx_desc * const tx_desc = - (struct ixpdev_tx_desc *)(IXP2000_SRAM0_VIRT_BASE + TX_BUF_DESC_BASE); -static int tx_pointer; - - -static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct ixpdev_priv *ip = netdev_priv(dev); - struct ixpdev_tx_desc *desc; - int entry; - unsigned long flags; - - if (unlikely(skb->len > PAGE_SIZE)) { - /* @@@ Count drops. */ - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - entry = tx_pointer; - tx_pointer = (tx_pointer + 1) % TX_BUF_COUNT; - - desc = tx_desc + entry; - desc->pkt_length = skb->len; - desc->channel = ip->channel; - - skb_copy_and_csum_dev(skb, phys_to_virt(desc->buf_addr)); - dev_kfree_skb(skb); - - ixp2000_reg_write(RING_TX_PENDING, - TX_BUF_DESC_BASE + (entry * sizeof(struct ixpdev_tx_desc))); - - local_irq_save(flags); - ip->tx_queue_entries++; - if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) - netif_stop_queue(dev); - local_irq_restore(flags); - - return NETDEV_TX_OK; -} - - -static int ixpdev_rx(struct net_device *dev, int processed, int budget) -{ - while (processed < budget) { - struct ixpdev_rx_desc *desc; - struct sk_buff *skb; - void *buf; - u32 _desc; - - _desc = ixp2000_reg_read(RING_RX_DONE); - if (_desc == 0) - return 0; - - desc = rx_desc + - ((_desc - RX_BUF_DESC_BASE) / sizeof(struct ixpdev_rx_desc)); - buf = phys_to_virt(desc->buf_addr); - - if (desc->pkt_length < 4 || desc->pkt_length > PAGE_SIZE) { - printk(KERN_ERR "ixp2000: rx err, length %d\n", - desc->pkt_length); - goto err; - } - - if (desc->channel < 0 || desc->channel >= nds_count) { - printk(KERN_ERR "ixp2000: rx err, channel %d\n", - desc->channel); - goto err; - } - - /* @@@ Make FCS stripping configurable. */ - desc->pkt_length -= 4; - - if (unlikely(!netif_running(nds[desc->channel]))) - goto err; - - skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length); - if (likely(skb != NULL)) { - skb_copy_to_linear_data(skb, buf, desc->pkt_length); - skb_put(skb, desc->pkt_length); - skb->protocol = eth_type_trans(skb, nds[desc->channel]); - - netif_receive_skb(skb); - } - -err: - ixp2000_reg_write(RING_RX_PENDING, _desc); - processed++; - } - - return processed; -} - -/* dev always points to nds[0]. */ -static int ixpdev_poll(struct napi_struct *napi, int budget) -{ - struct ixpdev_priv *ip = container_of(napi, struct ixpdev_priv, napi); - struct net_device *dev = ip->dev; - int rx; - - rx = 0; - do { - ixp2000_reg_write(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0x00ff); - - rx = ixpdev_rx(dev, rx, budget); - if (rx >= budget) - break; - } while (ixp2000_reg_read(IXP2000_IRQ_THD_RAW_STATUS_A_0) & 0x00ff); - - napi_complete(napi); - ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0x00ff); - - return rx; -} - -static void ixpdev_tx_complete(void) -{ - int channel; - u32 wake; - - wake = 0; - while (1) { - struct ixpdev_priv *ip; - u32 desc; - int entry; - - desc = ixp2000_reg_read(RING_TX_DONE); - if (desc == 0) - break; - - /* @@@ Check whether entries come back in order. */ - entry = (desc - TX_BUF_DESC_BASE) / sizeof(struct ixpdev_tx_desc); - channel = tx_desc[entry].channel; - - if (channel < 0 || channel >= nds_count) { - printk(KERN_ERR "ixp2000: txcomp channel index " - "out of bounds (%d, %.8i, %d)\n", - channel, (unsigned int)desc, entry); - continue; - } - - ip = netdev_priv(nds[channel]); - if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) - wake |= 1 << channel; - ip->tx_queue_entries--; - } - - for (channel = 0; wake != 0; channel++) { - if (wake & (1 << channel)) { - netif_wake_queue(nds[channel]); - wake &= ~(1 << channel); - } - } -} - -static irqreturn_t ixpdev_interrupt(int irq, void *dev_id) -{ - u32 status; - - status = ixp2000_reg_read(IXP2000_IRQ_THD_STATUS_A_0); - if (status == 0) - return IRQ_NONE; - - /* - * Any of the eight receive units signaled RX? - */ - if (status & 0x00ff) { - struct net_device *dev = nds[0]; - struct ixpdev_priv *ip = netdev_priv(dev); - - ixp2000_reg_wrb(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0x00ff); - if (likely(napi_schedule_prep(&ip->napi))) { - __napi_schedule(&ip->napi); - } else { - printk(KERN_CRIT "ixp2000: irq while polling!!\n"); - } - } - - /* - * Any of the eight transmit units signaled TXdone? - */ - if (status & 0xff00) { - ixp2000_reg_wrb(IXP2000_IRQ_THD_RAW_STATUS_A_0, 0xff00); - ixpdev_tx_complete(); - } - - return IRQ_HANDLED; -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void ixpdev_poll_controller(struct net_device *dev) -{ - disable_irq(IRQ_IXP2000_THDA0); - ixpdev_interrupt(IRQ_IXP2000_THDA0, dev); - enable_irq(IRQ_IXP2000_THDA0); -} -#endif - -static int ixpdev_open(struct net_device *dev) -{ - struct ixpdev_priv *ip = netdev_priv(dev); - int err; - - napi_enable(&ip->napi); - if (!nds_open++) { - err = request_irq(IRQ_IXP2000_THDA0, ixpdev_interrupt, - IRQF_SHARED, "ixp2000_eth", nds); - if (err) { - nds_open--; - napi_disable(&ip->napi); - return err; - } - - ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_SET_A_0, 0xffff); - } - - set_port_admin_status(ip->channel, 1); - netif_start_queue(dev); - - return 0; -} - -static int ixpdev_close(struct net_device *dev) -{ - struct ixpdev_priv *ip = netdev_priv(dev); - - netif_stop_queue(dev); - napi_disable(&ip->napi); - set_port_admin_status(ip->channel, 0); - - if (!--nds_open) { - ixp2000_reg_write(IXP2000_IRQ_THD_ENABLE_CLEAR_A_0, 0xffff); - free_irq(IRQ_IXP2000_THDA0, nds); - } - - return 0; -} - -static struct net_device_stats *ixpdev_get_stats(struct net_device *dev) -{ - struct ixpdev_priv *ip = netdev_priv(dev); - - pm3386_get_stats(ip->channel, &(dev->stats)); - - return &(dev->stats); -} - -static const struct net_device_ops ixpdev_netdev_ops = { - .ndo_open = ixpdev_open, - .ndo_stop = ixpdev_close, - .ndo_start_xmit = ixpdev_xmit, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_get_stats = ixpdev_get_stats, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ixpdev_poll_controller, -#endif -}; - -struct net_device *ixpdev_alloc(int channel, int sizeof_priv) -{ - struct net_device *dev; - struct ixpdev_priv *ip; - - dev = alloc_etherdev(sizeof_priv); - if (dev == NULL) - return NULL; - - dev->netdev_ops = &ixpdev_netdev_ops; - - dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM; - - ip = netdev_priv(dev); - ip->dev = dev; - netif_napi_add(dev, &ip->napi, ixpdev_poll, 64); - ip->channel = channel; - ip->tx_queue_entries = 0; - - return dev; -} - -int ixpdev_init(int __nds_count, struct net_device **__nds, - void (*__set_port_admin_status)(int port, int up)) -{ - int i; - int err; - - BUILD_BUG_ON(RX_BUF_COUNT > 192 || TX_BUF_COUNT > 192); - - printk(KERN_INFO "IXP2000 MSF ethernet driver %s\n", DRV_MODULE_VERSION); - - nds_count = __nds_count; - nds = __nds; - set_port_admin_status = __set_port_admin_status; - - for (i = 0; i < RX_BUF_COUNT; i++) { - void *buf; - - buf = (void *)get_zeroed_page(GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - while (--i >= 0) - free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); - goto err_out; - } - rx_desc[i].buf_addr = virt_to_phys(buf); - rx_desc[i].buf_length = PAGE_SIZE; - } - - /* @@@ Maybe we shouldn't be preallocating TX buffers. */ - for (i = 0; i < TX_BUF_COUNT; i++) { - void *buf; - - buf = (void *)get_zeroed_page(GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - while (--i >= 0) - free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); - goto err_free_rx; - } - tx_desc[i].buf_addr = virt_to_phys(buf); - } - - /* 256 entries, ring status set means 'empty', base address 0x0000. */ - ixp2000_reg_write(RING_RX_PENDING_BASE, 0x44000000); - ixp2000_reg_write(RING_RX_PENDING_HEAD, 0x00000000); - ixp2000_reg_write(RING_RX_PENDING_TAIL, 0x00000000); - - /* 256 entries, ring status set means 'full', base address 0x0400. */ - ixp2000_reg_write(RING_RX_DONE_BASE, 0x40000400); - ixp2000_reg_write(RING_RX_DONE_HEAD, 0x00000000); - ixp2000_reg_write(RING_RX_DONE_TAIL, 0x00000000); - - for (i = 0; i < RX_BUF_COUNT; i++) { - ixp2000_reg_write(RING_RX_PENDING, - RX_BUF_DESC_BASE + (i * sizeof(struct ixpdev_rx_desc))); - } - - ixp2000_uengine_load(0, &ixp2400_rx); - ixp2000_uengine_start_contexts(0, 0xff); - - /* 256 entries, ring status set means 'empty', base address 0x0800. */ - ixp2000_reg_write(RING_TX_PENDING_BASE, 0x44000800); - ixp2000_reg_write(RING_TX_PENDING_HEAD, 0x00000000); - ixp2000_reg_write(RING_TX_PENDING_TAIL, 0x00000000); - - /* 256 entries, ring status set means 'full', base address 0x0c00. */ - ixp2000_reg_write(RING_TX_DONE_BASE, 0x40000c00); - ixp2000_reg_write(RING_TX_DONE_HEAD, 0x00000000); - ixp2000_reg_write(RING_TX_DONE_TAIL, 0x00000000); - - ixp2000_uengine_load(1, &ixp2400_tx); - ixp2000_uengine_start_contexts(1, 0xff); - - for (i = 0; i < nds_count; i++) { - err = register_netdev(nds[i]); - if (err) { - while (--i >= 0) - unregister_netdev(nds[i]); - goto err_free_tx; - } - } - - for (i = 0; i < nds_count; i++) { - printk(KERN_INFO "%s: IXP2000 MSF ethernet (port %d), %pM.\n", - nds[i]->name, i, nds[i]->dev_addr); - } - - return 0; - -err_free_tx: - for (i = 0; i < TX_BUF_COUNT; i++) - free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); - -err_free_rx: - for (i = 0; i < RX_BUF_COUNT; i++) - free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); - -err_out: - return err; -} - -void ixpdev_deinit(void) -{ - int i; - - /* @@@ Flush out pending packets. */ - - for (i = 0; i < nds_count; i++) - unregister_netdev(nds[i]); - - ixp2000_uengine_stop_contexts(1, 0xff); - ixp2000_uengine_stop_contexts(0, 0xff); - ixp2000_uengine_reset(0x3); - - for (i = 0; i < TX_BUF_COUNT; i++) - free_page((unsigned long)phys_to_virt(tx_desc[i].buf_addr)); - - for (i = 0; i < RX_BUF_COUNT; i++) - free_page((unsigned long)phys_to_virt(rx_desc[i].buf_addr)); -} diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev.h deleted file mode 100644 index 391ece623243..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixpdev.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * IXP2000 MSF network device driver - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __IXPDEV_H -#define __IXPDEV_H - -struct ixpdev_priv -{ - struct net_device *dev; - struct napi_struct napi; - int channel; - int tx_queue_entries; -}; - -struct net_device *ixpdev_alloc(int channel, int sizeof_priv); -int ixpdev_init(int num_ports, struct net_device **nds, - void (*set_port_admin_status)(int port, int up)); -void ixpdev_deinit(void); - - -#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h b/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h deleted file mode 100644 index 86aa08ea0c33..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * IXP2000 MSF network device driver - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __IXPDEV_PRIV_H -#define __IXPDEV_PRIV_H - -#define RX_BUF_DESC_BASE 0x00001000 -#define RX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_rx_desc))) -#define TX_BUF_DESC_BASE 0x00002000 -#define TX_BUF_COUNT ((3 * PAGE_SIZE) / (4 * sizeof(struct ixpdev_tx_desc))) -#define TX_BUF_COUNT_PER_CHAN (TX_BUF_COUNT / 4) - -#define RING_RX_PENDING ((u32 *)IXP2000_SCRATCH_RING_VIRT_BASE) -#define RING_RX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 4)) -#define RING_TX_PENDING ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 8)) -#define RING_TX_DONE ((u32 *)(IXP2000_SCRATCH_RING_VIRT_BASE + 12)) - -#define SCRATCH_REG(x) ((u32 *)(IXP2000_GLOBAL_REG_VIRT_BASE | 0x0800 | (x))) -#define RING_RX_PENDING_BASE SCRATCH_REG(0x00) -#define RING_RX_PENDING_HEAD SCRATCH_REG(0x04) -#define RING_RX_PENDING_TAIL SCRATCH_REG(0x08) -#define RING_RX_DONE_BASE SCRATCH_REG(0x10) -#define RING_RX_DONE_HEAD SCRATCH_REG(0x14) -#define RING_RX_DONE_TAIL SCRATCH_REG(0x18) -#define RING_TX_PENDING_BASE SCRATCH_REG(0x20) -#define RING_TX_PENDING_HEAD SCRATCH_REG(0x24) -#define RING_TX_PENDING_TAIL SCRATCH_REG(0x28) -#define RING_TX_DONE_BASE SCRATCH_REG(0x30) -#define RING_TX_DONE_HEAD SCRATCH_REG(0x34) -#define RING_TX_DONE_TAIL SCRATCH_REG(0x38) - -struct ixpdev_rx_desc -{ - u32 buf_addr; - u32 buf_length; - u32 channel; - u32 pkt_length; -}; - -struct ixpdev_tx_desc -{ - u32 buf_addr; - u32 pkt_length; - u32 channel; - u32 unused; -}; - - -#endif diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.c b/drivers/net/ethernet/xscale/ixp2000/pm3386.c deleted file mode 100644 index e08d3f9863b8..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/pm3386.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Helper functions for the PM3386s on the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include "pm3386.h" - -/* - * Read from register 'reg' of PM3386 device 'pm'. - */ -static u16 pm3386_reg_read(int pm, int reg) -{ - void *_reg; - u16 value; - - _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; - if (pm == 1) - _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; - - value = *((volatile u16 *)(_reg + (reg << 1))); - -// printk(KERN_INFO "pm3386_reg_read(%d, %.3x) = %.8x\n", pm, reg, value); - - return value; -} - -/* - * Write to register 'reg' of PM3386 device 'pm', and perform - * a readback from the identification register. - */ -static void pm3386_reg_write(int pm, int reg, u16 value) -{ - void *_reg; - u16 dummy; - -// printk(KERN_INFO "pm3386_reg_write(%d, %.3x, %.8x)\n", pm, reg, value); - - _reg = (void *)ENP2611_PM3386_0_VIRT_BASE; - if (pm == 1) - _reg = (void *)ENP2611_PM3386_1_VIRT_BASE; - - *((volatile u16 *)(_reg + (reg << 1))) = value; - - dummy = *((volatile u16 *)_reg); - __asm__ __volatile__("mov %0, %0" : "+r" (dummy)); -} - -/* - * Read from port 'port' register 'reg', where the registers - * for the different ports are 'spacing' registers apart. - */ -static u16 pm3386_port_reg_read(int port, int _reg, int spacing) -{ - int reg; - - reg = _reg; - if (port & 1) - reg += spacing; - - return pm3386_reg_read(port >> 1, reg); -} - -/* - * Write to port 'port' register 'reg', where the registers - * for the different ports are 'spacing' registers apart. - */ -static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value) -{ - int reg; - - reg = _reg; - if (port & 1) - reg += spacing; - - pm3386_reg_write(port >> 1, reg, value); -} - -int pm3386_secondary_present(void) -{ - return pm3386_reg_read(1, 0) == 0x3386; -} - -void pm3386_reset(void) -{ - u8 mac[3][6]; - int secondary; - - secondary = pm3386_secondary_present(); - - /* Save programmed MAC addresses. */ - pm3386_get_mac(0, mac[0]); - pm3386_get_mac(1, mac[1]); - if (secondary) - pm3386_get_mac(2, mac[2]); - - /* Assert analog and digital reset. */ - pm3386_reg_write(0, 0x002, 0x0060); - if (secondary) - pm3386_reg_write(1, 0x002, 0x0060); - mdelay(1); - - /* Deassert analog reset. */ - pm3386_reg_write(0, 0x002, 0x0062); - if (secondary) - pm3386_reg_write(1, 0x002, 0x0062); - mdelay(10); - - /* Deassert digital reset. */ - pm3386_reg_write(0, 0x002, 0x0063); - if (secondary) - pm3386_reg_write(1, 0x002, 0x0063); - mdelay(10); - - /* Restore programmed MAC addresses. */ - pm3386_set_mac(0, mac[0]); - pm3386_set_mac(1, mac[1]); - if (secondary) - pm3386_set_mac(2, mac[2]); - - /* Disable carrier on all ports. */ - pm3386_set_carrier(0, 0); - pm3386_set_carrier(1, 0); - if (secondary) - pm3386_set_carrier(2, 0); -} - -static u16 swaph(u16 x) -{ - return ((x << 8) | (x >> 8)) & 0xffff; -} - -int pm3386_port_count(void) -{ - return 2 + pm3386_secondary_present(); -} - -void pm3386_init_port(int port) -{ - int pm = port >> 1; - - /* - * Work around ENP2611 bootloader programming MAC address - * in reverse. - */ - if (pm3386_port_reg_read(port, 0x30a, 0x100) == 0x0000 && - (pm3386_port_reg_read(port, 0x309, 0x100) & 0xff00) == 0x5000) { - u16 temp[3]; - - temp[0] = pm3386_port_reg_read(port, 0x308, 0x100); - temp[1] = pm3386_port_reg_read(port, 0x309, 0x100); - temp[2] = pm3386_port_reg_read(port, 0x30a, 0x100); - pm3386_port_reg_write(port, 0x308, 0x100, swaph(temp[2])); - pm3386_port_reg_write(port, 0x309, 0x100, swaph(temp[1])); - pm3386_port_reg_write(port, 0x30a, 0x100, swaph(temp[0])); - } - - /* - * Initialise narrowbanding mode. See application note 2010486 - * for more information. (@@@ We also need to issue a reset - * when ROOL or DOOL are detected.) - */ - pm3386_port_reg_write(port, 0x708, 0x10, 0xd055); - udelay(500); - pm3386_port_reg_write(port, 0x708, 0x10, 0x5055); - - /* - * SPI-3 ingress block. Set 64 bytes SPI-3 burst size - * towards SPI-3 bridge. - */ - pm3386_port_reg_write(port, 0x122, 0x20, 0x0002); - - /* - * Enable ingress protocol checking, and soft reset the - * SPI-3 ingress block. - */ - pm3386_reg_write(pm, 0x103, 0x0003); - while (!(pm3386_reg_read(pm, 0x103) & 0x80)) - ; - - /* - * SPI-3 egress block. Gather 12288 bytes of the current - * packet in the TX fifo before initiating transmit on the - * SERDES interface. (Prevents TX underflows.) - */ - pm3386_port_reg_write(port, 0x221, 0x20, 0x0007); - - /* - * Enforce odd parity from the SPI-3 bridge, and soft reset - * the SPI-3 egress block. - */ - pm3386_reg_write(pm, 0x203, 0x000d & ~(4 << (port & 1))); - while ((pm3386_reg_read(pm, 0x203) & 0x000c) != 0x000c) - ; - - /* - * EGMAC block. Set this channels to reject long preambles, - * not send or transmit PAUSE frames, enable preamble checking, - * disable frame length checking, enable FCS appending, enable - * TX frame padding. - */ - pm3386_port_reg_write(port, 0x302, 0x100, 0x0113); - - /* - * Soft reset the EGMAC block. - */ - pm3386_port_reg_write(port, 0x301, 0x100, 0x8000); - pm3386_port_reg_write(port, 0x301, 0x100, 0x0000); - - /* - * Auto-sense autonegotiation status. - */ - pm3386_port_reg_write(port, 0x306, 0x100, 0x0100); - - /* - * Allow reception of jumbo frames. - */ - pm3386_port_reg_write(port, 0x310, 0x100, 9018); - - /* - * Allow transmission of jumbo frames. - */ - pm3386_port_reg_write(port, 0x336, 0x100, 9018); - - /* @@@ Should set 0x337/0x437 (RX forwarding threshold.) */ - - /* - * Set autonegotiation parameters to 'no PAUSE, full duplex.' - */ - pm3386_port_reg_write(port, 0x31c, 0x100, 0x0020); - - /* - * Enable and restart autonegotiation. - */ - pm3386_port_reg_write(port, 0x318, 0x100, 0x0003); - pm3386_port_reg_write(port, 0x318, 0x100, 0x0002); -} - -void pm3386_get_mac(int port, u8 *mac) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x308, 0x100); - mac[0] = temp & 0xff; - mac[1] = (temp >> 8) & 0xff; - - temp = pm3386_port_reg_read(port, 0x309, 0x100); - mac[2] = temp & 0xff; - mac[3] = (temp >> 8) & 0xff; - - temp = pm3386_port_reg_read(port, 0x30a, 0x100); - mac[4] = temp & 0xff; - mac[5] = (temp >> 8) & 0xff; -} - -void pm3386_set_mac(int port, u8 *mac) -{ - pm3386_port_reg_write(port, 0x308, 0x100, (mac[1] << 8) | mac[0]); - pm3386_port_reg_write(port, 0x309, 0x100, (mac[3] << 8) | mac[2]); - pm3386_port_reg_write(port, 0x30a, 0x100, (mac[5] << 8) | mac[4]); -} - -static u32 pm3386_get_stat(int port, u16 base) -{ - u32 value; - - value = pm3386_port_reg_read(port, base, 0x100); - value |= pm3386_port_reg_read(port, base + 1, 0x100) << 16; - - return value; -} - -void pm3386_get_stats(int port, struct net_device_stats *stats) -{ - /* - * Snapshot statistics counters. - */ - pm3386_port_reg_write(port, 0x500, 0x100, 0x0001); - while (pm3386_port_reg_read(port, 0x500, 0x100) & 0x0001) - ; - - memset(stats, 0, sizeof(*stats)); - - stats->rx_packets = pm3386_get_stat(port, 0x510); - stats->tx_packets = pm3386_get_stat(port, 0x590); - stats->rx_bytes = pm3386_get_stat(port, 0x514); - stats->tx_bytes = pm3386_get_stat(port, 0x594); - /* @@@ Add other stats. */ -} - -void pm3386_set_carrier(int port, int state) -{ - pm3386_port_reg_write(port, 0x703, 0x10, state ? 0x1001 : 0x0000); -} - -int pm3386_is_link_up(int port) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x31a, 0x100); - temp = pm3386_port_reg_read(port, 0x31a, 0x100); - - return !!(temp & 0x0002); -} - -void pm3386_enable_rx(int port) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x303, 0x100); - temp |= 0x1000; - pm3386_port_reg_write(port, 0x303, 0x100, temp); -} - -void pm3386_disable_rx(int port) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x303, 0x100); - temp &= 0xefff; - pm3386_port_reg_write(port, 0x303, 0x100, temp); -} - -void pm3386_enable_tx(int port) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x303, 0x100); - temp |= 0x4000; - pm3386_port_reg_write(port, 0x303, 0x100, temp); -} - -void pm3386_disable_tx(int port) -{ - u16 temp; - - temp = pm3386_port_reg_read(port, 0x303, 0x100); - temp &= 0xbfff; - pm3386_port_reg_write(port, 0x303, 0x100, temp); -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/xscale/ixp2000/pm3386.h b/drivers/net/ethernet/xscale/ixp2000/pm3386.h deleted file mode 100644 index cc4183dca911..000000000000 --- a/drivers/net/ethernet/xscale/ixp2000/pm3386.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Helper functions for the PM3386s on the Radisys ENP2611 - * Copyright (C) 2004, 2005 Lennert Buytenhek - * Dedicated to Marija Kulikova. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __PM3386_H -#define __PM3386_H - -void pm3386_reset(void); -int pm3386_port_count(void); -void pm3386_init_port(int port); -void pm3386_get_mac(int port, u8 *mac); -void pm3386_set_mac(int port, u8 *mac); -void pm3386_get_stats(int port, struct net_device_stats *stats); -void pm3386_set_carrier(int port, int state); -int pm3386_is_link_up(int port); -void pm3386_enable_rx(int port); -void pm3386_disable_rx(int port); -void pm3386_enable_tx(int port); -void pm3386_disable_tx(int port); - - -#endif -- GitLab