From 68e5fc4a255a7f453b8d156b89d1e37a0ad61465 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 27 Apr 2015 08:49:56 +0200 Subject: [PATCH] tty: serial: 8250_mtk: use pm_runtime callbacks for enabling The pm_runtime callbacks already enable and disable the device. Use them in probe() and remove() instead of duplicating the code. This allows us to concentrate more code for enabling/disabling the UART in a single place. Signed-off-by: Sascha Hauer Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_mtk.c | 69 ++++++++++++++++-------------- 1 file changed, 36 insertions(+), 33 deletions(-) diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index bcfaa8dcddd5..2f28bd08b69f 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -115,6 +115,29 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, tty_termios_encode_baud_rate(termios, baud, baud); } +static int mtk8250_runtime_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + clk_disable_unprepare(data->uart_clk); + + return 0; +} + +static int mtk8250_runtime_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(data->uart_clk); + if (err) { + dev_warn(dev, "Can't enable clock\n"); + return err; + } + + return 0; +} + static void mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) { @@ -130,19 +153,12 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, struct mtk8250_data *data) { - int err; - data->uart_clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(data->uart_clk)) { dev_warn(&pdev->dev, "Can't get uart clock\n"); return PTR_ERR(data->uart_clk); } - err = clk_prepare_enable(data->uart_clk); - if (err) { - dev_warn(&pdev->dev, "Can't prepare clock\n"); - return err; - } p->uartclk = clk_get_rate(data->uart_clk); return 0; @@ -193,14 +209,18 @@ static int mtk8250_probe(struct platform_device *pdev) writel(0x0, uart.port.membase + (MTK_UART_RATE_FIX << uart.port.regshift)); - data->line = serial8250_register_8250_port(&uart); - if (data->line < 0) - return data->line; - platform_set_drvdata(pdev, data); - pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + return err; + } + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) + return data->line; return 0; } @@ -212,10 +232,13 @@ static int mtk8250_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); serial8250_unregister_port(data->line); - clk_disable_unprepare(data->uart_clk); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); + + if (!pm_runtime_status_suspended(&pdev->dev)) + mtk8250_runtime_suspend(&pdev->dev); + return 0; } @@ -239,26 +262,6 @@ static int mtk8250_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM -static int mtk8250_runtime_suspend(struct device *dev) -{ - struct mtk8250_data *data = dev_get_drvdata(dev); - - clk_disable_unprepare(data->uart_clk); - - return 0; -} - -static int mtk8250_runtime_resume(struct device *dev) -{ - struct mtk8250_data *data = dev_get_drvdata(dev); - - clk_prepare_enable(data->uart_clk); - - return 0; -} -#endif - static const struct dev_pm_ops mtk8250_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume) SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume, -- GitLab