diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index c90fbd269b8dadcd9294df5c29cb68d94977e2b3..cba6ff43cdd1d3e8dab0a7ee68a15673dcc3a0a9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -466,6 +466,7 @@ struct ixgbe_adapter { #define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 8) #define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 9) #define IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED (u32)(1 << 10) +#define IXGBE_FLAG2_PTP_PPS_ENABLED (u32)(1 << 11) /* Tx fast path data */ int num_tx_queues; @@ -719,6 +720,7 @@ extern void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, extern int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd); extern void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter); +extern void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr); #endif /* CONFIG_IXGBE_PTP */ #endif /* _IXGBE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9a83c4055c5f181c894db8faf17f151577d83f99..1ad6e2aa1dc8e4c3eb303b804be00814b28036f2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2322,6 +2322,9 @@ static irqreturn_t ixgbe_msix_other(int irq, void *data) } ixgbe_check_fan_failure(adapter, eicr); +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_check_pps_event(adapter, eicr); +#endif /* re-enable the original interrupt state, no lsc, no queues */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) @@ -2514,6 +2517,9 @@ static irqreturn_t ixgbe_intr(int irq, void *data) } ixgbe_check_fan_failure(adapter, eicr); +#ifdef CONFIG_IXGBE_PTP + ixgbe_ptp_check_pps_event(adapter, eicr); +#endif /* would disable interrupts here but EIAM disabled it */ napi_schedule(&q_vector->napi); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 0b6553ee18af9e95c30ffb6bbb41b3a9a542f297..ddc6a4d193028694f30c9835e5df76df09a91366 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -96,6 +96,10 @@ #define IXGBE_OVERFLOW_PERIOD (HZ * 30) +#ifndef NSECS_PER_SEC +#define NSECS_PER_SEC 1000000000ULL +#endif + /** * ixgbe_ptp_read - read raw cycle counter (to be used by time counter) * @cc - the cyclecounter structure @@ -252,14 +256,153 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, * @on - whether to enable or disable the feature * * enable (or disable) ancillary features of the phc subsystem. - * our driver does not support any of these features + * our driver only supports the PPS feature on the X540 */ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, struct ptp_clock_request *rq, int on) { + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + + /** + * When PPS is enabled, unmask the interrupt for the ClockOut + * feature, so that the interrupt handler can send the PPS + * event when the clock SDP triggers. Clear mask when PPS is + * disabled + */ + if (rq->type == PTP_CLK_REQ_PPS) { + switch (adapter->hw.mac.type) { + case ixgbe_mac_X540: + if (on) + adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED; + else + adapter->flags2 &= + ~IXGBE_FLAG2_PTP_PPS_ENABLED; + return 0; + default: + break; + } + } + return -ENOTSUPP; } +/** + * ixgbe_ptp_check_pps_event + * @adapter - the private adapter structure + * @eicr - the interrupt cause register value + * + * This function is called by the interrupt routine when checking for + * interrupts. It will check and handle a pps event. + */ +void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ptp_clock_event event; + + event.type = PTP_CLOCK_PPS; + + /* Make sure ptp clock is valid, and PPS event enabled */ + if (!adapter->ptp_clock || + !(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED)) + return; + + switch (hw->mac.type) { + case ixgbe_mac_X540: + if (eicr & IXGBE_EICR_TIMESYNC) + ptp_clock_event(adapter->ptp_clock, &event); + break; + default: + break; + } +} + +/** + * ixgbe_ptp_enable_sdp + * @hw - the hardware private structure + * @shift - the clock shift for calculating nanoseconds + * + * this function enables the clock out feature on the sdp0 for the + * X540 device. It will create a 1second periodic output that can be + * used as the PPS (via an interrupt). + * + * It calculates when the systime will be on an exact second, and then + * aligns the start of the PPS signal to that value. The shift is + * necessary because it can change based on the link speed. + */ +static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift) +{ + u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh; + u64 clock_edge = 0; + u32 rem; + + switch (hw->mac.type) { + case ixgbe_mac_X540: + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* + * enable the SDP0 pin as output, and connected to the native + * function for Timesync (ClockOut) + */ + esdp |= (IXGBE_ESDP_SDP0_DIR | + IXGBE_ESDP_SDP0_NATIVE); + + /* + * enable the Clock Out feature on SDP0, and allow interrupts + * to occur when the pin changes + */ + tsauxc = (IXGBE_TSAUXC_EN_CLK | + IXGBE_TSAUXC_SYNCLK | + IXGBE_TSAUXC_SDP0_INT); + + /* clock period (or pulse length) */ + clktiml = (u32)(NSECS_PER_SEC << shift); + clktimh = (u32)((NSECS_PER_SEC << shift) >> 32); + + clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML); + clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32; + + /* + * account for the fact that we can't do u64 division + * with remainder, by converting the clock values into + * nanoseconds first + */ + clock_edge >>= shift; + div_u64_rem(clock_edge, NSECS_PER_SEC, &rem); + clock_edge += (NSECS_PER_SEC - rem); + clock_edge <<= shift; + + /* specify the initial clock start time */ + trgttiml = (u32)clock_edge; + trgttimh = (u32)(clock_edge >> 32); + + IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml); + IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh); + IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml); + IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh); + + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc); + + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_TIMESYNC); + break; + default: + break; + } +} + +/** + * ixgbe_ptp_disable_sdp + * @hw - the private hardware structure + * + * this function disables the auxiliary SDP clock out feature + */ +static void ixgbe_ptp_disable_sdp(struct ixgbe_hw *hw) +{ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_TIMESYNC); + IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0); +} + /** * ixgbe_ptp_overflow_check - delayed work to detect SYSTIME overflow * @work: structure containing information about this work task @@ -557,6 +700,9 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, * the device, which is used to generate the cycle counter * registers. Therefor this function is called whenever the link speed * changes. + * + * This function also turns on the SDP pin for clock out feature (X540 + * only), because this is where the shift is first calculated. */ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) { @@ -588,6 +734,9 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) if (adapter->cycle_speed == cycle_speed) return; + /* disable the SDP clock out */ + ixgbe_ptp_disable_sdp(hw); + /** * Scale the NIC cycle counter by a large factor so that * relatively small corrections to the frequency can be added @@ -640,6 +789,10 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0x00000000); IXGBE_WRITE_FLUSH(hw); + /* now that the shift has been calculated and the systime + * registers reset, (re-)enable the Clock out feature*/ + ixgbe_ptp_enable_sdp(hw, shift); + /* store the new cycle speed */ adapter->cycle_speed = cycle_speed; @@ -676,6 +829,19 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) switch (adapter->hw.mac.type) { case ixgbe_mac_X540: + snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); + adapter->ptp_caps.owner = THIS_MODULE; + adapter->ptp_caps.max_adj = 250000000; + adapter->ptp_caps.n_alarm = 0; + adapter->ptp_caps.n_ext_ts = 0; + adapter->ptp_caps.n_per_out = 0; + adapter->ptp_caps.pps = 1; + adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq; + adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; + adapter->ptp_caps.gettime = ixgbe_ptp_gettime; + adapter->ptp_caps.settime = ixgbe_ptp_settime; + adapter->ptp_caps.enable = ixgbe_ptp_enable; + break; case ixgbe_mac_82599EB: snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr); adapter->ptp_caps.owner = THIS_MODULE; @@ -720,6 +886,8 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) */ void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) { + ixgbe_ptp_disable_sdp(&adapter->hw); + /* stop the overflow check task */ adapter->flags2 &= ~IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 87d54cad20d30db0c618ce536b07594a27667b92..204848d2448c9aef91a8a23da1e3d74417290361 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -824,6 +824,8 @@ struct ixgbe_thermal_sensor_data { #define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */ #define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */ #define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */ +#define IXGBE_CLKTIML 0x08C34 /* Clock Out Time Register Low - RW */ +#define IXGBE_CLKTIMH 0x08C38 /* Clock Out Time Register High - RW */ #define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */ #define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */ #define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */ @@ -1309,6 +1311,7 @@ enum { #define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ #define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ #define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ +#define IXGBE_EICR_TIMESYNC 0x01000000 /* Timesync Event */ #define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ #define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ #define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ @@ -1326,6 +1329,7 @@ enum { #define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EICS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ #define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ #define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ @@ -1344,6 +1348,7 @@ enum { #define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ #define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermel Sensor Event */ +#define IXGBE_EIMS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ #define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ #define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ @@ -1361,6 +1366,7 @@ enum { #define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ #define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ #define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMC_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */ #define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ #define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ #define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ @@ -1501,8 +1507,10 @@ enum { #define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */ #define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ #define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ +#define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */ #define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */ #define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ +#define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 Native Function */ /* LEDCTL Bit Masks */ #define IXGBE_LED_IVRT_BASE 0x00000040 @@ -1879,6 +1887,10 @@ enum { #define IXGBE_RXDCTL_RLPML_EN 0x00008000 #define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ +#define IXGBE_TSAUXC_EN_CLK 0x00000004 +#define IXGBE_TSAUXC_SYNCLK 0x00000008 +#define IXGBE_TSAUXC_SDP0_INT 0x00000040 + #define IXGBE_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ #define IXGBE_TSYNCTXCTL_ENABLED 0x00000010 /* Tx timestamping enabled */