Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 67e7607f 编写于 作者: J Jerome Brunet 提交者： Kevin Hilman
浏览文件
操作

ARM64: dts: meson: add mmc clk gate pins 

Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This
is necessary to be able to gate the clk outside of the SoC while
keeping it running in the controller
Signed-off-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>
上级 673ccaac
显示空白变更内容
内联 并排
Showing with 126 addition and 31 deletion
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
浏览文件 @ 67e7607f
......@@ -168,7 +168,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -194,7 +195,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -212,7 +214,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
浏览文件 @ 67e7607f
......@@ -250,7 +250,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -276,7 +277,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -294,7 +296,8 @@
&sd_emmc_c {
status = "disabled";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
max-frequency = <200000000>;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
浏览文件 @ 67e7607f
......@@ -232,7 +232,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -253,7 +254,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -271,7 +273,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
浏览文件 @ 67e7607f
......@@ -253,7 +253,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -271,7 +272,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
max-frequency = <200000000>;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
浏览文件 @ 67e7607f
......@@ -194,7 +194,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -220,7 +221,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -238,7 +240,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
浏览文件 @ 67e7607f
......@@ -155,7 +155,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -181,7 +182,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -198,7 +200,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
浏览文件 @ 67e7607f
......@@ -392,6 +392,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
......@@ -430,6 +441,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
......@@ -442,6 +464,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
浏览文件 @ 67e7607f
......@@ -123,7 +123,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -141,7 +142,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
浏览文件 @ 67e7607f
......@@ -197,7 +197,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -215,7 +216,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
浏览文件 @ 67e7607f
......@@ -189,7 +189,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -210,7 +211,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -228,7 +230,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
浏览文件 @ 67e7607f
......@@ -95,7 +95,8 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
......@@ -116,7 +117,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -134,7 +136,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
浏览文件 @ 67e7607f
......@@ -281,6 +281,17 @@
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "BOOT_8";
bias-pull-down;
};
};
nor_pins: nor {
mux {
groups = "nor_d",
......@@ -319,6 +330,17 @@
};
};
sdcard_clk_gate_pins: sdcard_clk_gate {
mux {
groups = "CARD_2";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "CARD_2";
bias-pull-down;
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
......@@ -331,6 +353,17 @@
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
};
cfg-pull-down {
pins = "GPIOX_4";
bias-pull-down;
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
......
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
浏览文件 @ 67e7607f
......@@ -175,7 +175,8 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
......@@ -193,7 +194,8 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或