提交 67460a7c 编写于 作者: D David Brownell 提交者: Samuel Ortiz

mfd: twl4030: cleanup symbols and OMAP dependency

Finish removing dependency of TWL driver stack on platform-specific
IRQ definitions ... and remove the build dependency on OMAP.

This lets the TWL4030 code be included in test builds for most
platforms, and will make it easier for non-OMAP folk to update
most of this code for new APIs etc.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
上级 5725d66b
...@@ -63,7 +63,7 @@ config UCB1400_CORE ...@@ -63,7 +63,7 @@ config UCB1400_CORE
config TWL4030_CORE config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support" bool "Texas Instruments TWL4030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3) depends on I2C=y && GENERIC_HARDIRQS
help help
Say yes here if you have TWL4030 family chip on your board. Say yes here if you have TWL4030 family chip on your board.
This core driver provides register access and IRQ handling This core driver provides register access and IRQ handling
......
...@@ -285,33 +285,6 @@ struct twl4030_platform_data { ...@@ -285,33 +285,6 @@ struct twl4030_platform_data {
int twl4030_sih_setup(int module); int twl4030_sih_setup(int module);
/*
* FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the
* IRQ data to subsidiary devices using platform device resources.
*/
/* IRQ information-need base */
#include <mach/irqs.h>
/* TWL4030 interrupts */
/* #define TWL4030_MODIRQ_GPIO (TWL4030_IRQ_BASE + 0) */
#define TWL4030_MODIRQ_KEYPAD (TWL4030_IRQ_BASE + 1)
#define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2)
#define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3)
/* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */
/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */
#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0)
/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */
/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */
/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */
/* #define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) */
/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) */
/* #define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) */
/* #define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) */
/* Rest are unsued currently*/
/* Offsets to Power Registers */ /* Offsets to Power Registers */
#define TWL4030_VDAC_DEV_GRP 0x3B #define TWL4030_VDAC_DEV_GRP 0x3B
#define TWL4030_VDAC_DEDICATED 0x3E #define TWL4030_VDAC_DEDICATED 0x3E
...@@ -322,10 +295,6 @@ int twl4030_sih_setup(int module); ...@@ -322,10 +295,6 @@ int twl4030_sih_setup(int module);
#define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEV_GRP 0x1F
#define TWL4030_VAUX3_DEDICATED 0x22 #define TWL4030_VAUX3_DEDICATED 0x22
/* TWL4030 GPIO interrupt definitions */
#define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n))
/* /*
* Exported TWL4030 GPIO APIs * Exported TWL4030 GPIO APIs
* *
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册