提交 6724add1 编写于 作者: M Mike Christie 提交者: James Bottomley

[SCSI] libiscsi: sync up iscsi and scsi eh's access to the connection

The iscsi eh could be tearing down the session/connection while
the scsi eh is still sending task management functions. If when
we drop the session lock to grab the recv lock, the iscsi eh
tears down the connection we will oops.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 96809f1b
......@@ -1056,7 +1056,9 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
ctask->mtask = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)hdr,
NULL, 0);
if (!ctask->mtask) {
spin_unlock_bh(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
spin_lock_bh(&session->lock)
debug_scsi("abort sent failure [itt 0x%x]\n", ctask->itt);
return -EPERM;
}
......@@ -1073,6 +1075,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt);
}
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
scsi_queue_work(session->host, &conn->xmitwork);
/*
......@@ -1090,6 +1093,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
if (signal_pending(current))
flush_signals(current);
del_timer_sync(&conn->tmabort_timer);
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
return 0;
}
......@@ -1165,31 +1169,45 @@ static void fail_command(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask,
__iscsi_put_ctask(ctask);
}
static void iscsi_suspend_tx(struct iscsi_conn *conn)
{
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
scsi_flush_work(conn->session->host);
}
static void iscsi_start_tx(struct iscsi_conn *conn)
{
clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
scsi_queue_work(conn->session->host, &conn->xmitwork);
}
int iscsi_eh_abort(struct scsi_cmnd *sc)
{
struct Scsi_Host *host = sc->device->host;
struct iscsi_session *session = iscsi_hostdata(host->hostdata);
struct iscsi_cmd_task *ctask;
struct iscsi_conn *conn;
struct iscsi_session *session;
int rc;
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
/*
* if session was ISCSI_STATE_IN_RECOVERY then we may not have
* got the command.
*/
if (!sc->SCp.ptr) {
debug_scsi("sc never reached iscsi layer or it completed.\n");
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
}
ctask = (struct iscsi_cmd_task *)sc->SCp.ptr;
conn = ctask->conn;
session = conn->session;
conn->eh_abort_cnt++;
debug_scsi("aborting [sc %p itt 0x%x]\n", sc, ctask->itt);
spin_lock_bh(&session->lock);
/*
* If we are not logged in or we have started a new session
* then let the host reset code handle this
......@@ -1226,6 +1244,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
switch (conn->tmabort_state) {
case TMABORT_SUCCESS:
spin_unlock_bh(&session->lock);
iscsi_suspend_tx(conn);
/*
* clean up task if aborted. grab the recv lock as a writer
*/
......@@ -1234,11 +1253,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
fail_command(conn, ctask, DID_ABORT << 16);
spin_unlock(&session->lock);
write_unlock_bh(conn->recv_lock);
/*
* make sure xmit thread is not still touching the
* ctask/scsi_cmnd
*/
scsi_flush_work(session->host);
iscsi_start_tx(conn);
goto success_unlocked;
case TMABORT_NOT_FOUND:
if (!ctask->sc) {
......@@ -1258,12 +1273,14 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
spin_unlock_bh(&session->lock);
success_unlocked:
debug_scsi("abort success [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
mutex_unlock(&session->eh_mutex);
return SUCCESS;
failed:
spin_unlock_bh(&session->lock);
failed_unlocked:
debug_scsi("abort failed [sc %lx itt 0x%x]\n", (long)sc, ctask->itt);
mutex_unlock(&session->eh_mutex);
return FAILED;
}
EXPORT_SYMBOL_GPL(iscsi_eh_abort);
......@@ -1410,6 +1427,7 @@ iscsi_session_setup(struct iscsi_transport *iscsit,
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
session->tt = iscsit;
mutex_init(&session->eh_mutex);
/* initialize SCSI PDU commands pool */
if (iscsi_pool_init(&session->cmdpool, session->cmds_max,
......@@ -1743,9 +1761,22 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
{
int old_stop_stage;
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
if (conn->stop_stage == STOP_CONN_TERM) {
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
return;
}
/*
* The LLD either freed/unset the lock on us, or userspace called
* stop but did not create a proper connection (connection was never
* bound or it was unbound then stop was called).
*/
if (!conn->recv_lock) {
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
return;
}
......@@ -1762,9 +1793,9 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
spin_unlock_bh(&session->lock);
scsi_flush_work(session->host);
iscsi_suspend_tx(conn);
write_lock_bh(conn->recv_lock);
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
......@@ -1793,6 +1824,7 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
fail_all_commands(conn);
flush_control_queues(session, conn);
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
}
void iscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
......
......@@ -205,6 +205,13 @@ struct iscsi_queue {
};
struct iscsi_session {
/*
* Syncs up the scsi eh thread with the iscsi eh thread when sending
* task management functions. This must be taken before the session
* and recv lock.
*/
struct mutex eh_mutex;
/* iSCSI session-wide sequencing */
uint32_t cmdsn;
uint32_t exp_cmdsn;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册