From 664e9e495a3ada96ed2ebab89edb40c4fc132bd7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 24 Dec 2012 16:01:39 -0200 Subject: [PATCH] ARM: dts: imx23-olinuxino: Fix IOMUX settings On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 7c43b8e70b9f..e7484e4ea659 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -39,17 +39,17 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - led_pin_gpio0_17: led_gpio0_17@0 { + led_pin_gpio2_1: led_gpio2_1@0 { reg = <0>; fsl,pinmux-ids = < - 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -110,7 +110,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio0_17>; + pinctrl-0 = <&led_pin_gpio2_1>; user { label = "green"; -- GitLab