提交 622f8061 编写于 作者: L Linus Torvalds

Merge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: fix sci interrupt handler
  video: hitfb: Move over to dev_pm_ops.
  video: hitfb: Convert to framebuffer_alloc().
  video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().
  sh: add r8a66597 usb0 host to the se7724 board
  usb: allow sh7724 to enable on-chip r8a66597
  sh-sci: update receive error handling for muxed irqs
  sh: define PERF_COUNTER_INDEX_OFFSET.
......@@ -19,6 +19,7 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/io.h>
......@@ -302,6 +303,34 @@ static struct platform_device sh_eth_device = {
.resource = sh_eth_resources,
};
static struct r8a66597_platdata sh7724_usb0_host_data = {
};
static struct resource sh7724_usb0_host_resources[] = {
[0] = {
.start = 0xa4d80000,
.end = 0xa4d800ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
},
};
static struct platform_device sh7724_usb0_host_device = {
.name = "r8a66597_hcd",
.id = 0,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &sh7724_usb0_host_data,
},
.num_resources = ARRAY_SIZE(sh7724_usb0_host_resources),
.resource = sh7724_usb0_host_resources,
};
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
......@@ -311,6 +340,7 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&ceu1_device,
&keysc_device,
&sh_eth_device,
&sh7724_usb0_host_device,
};
#define EEPROM_OP 0xBA206000
......@@ -364,6 +394,7 @@ static void __init sh_eth_init(void)
#define SW4140 0xBA201000
#define FPGA_OUT 0xBA200400
#define PORT_HIZA 0xA4050158
#define PORT_MSELCRB 0xA4050182
#define SW41_A 0x0100
#define SW41_B 0x0200
......@@ -373,6 +404,7 @@ static void __init sh_eth_init(void)
#define SW41_F 0x2000
#define SW41_G 0x4000
#define SW41_H 0x8000
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
......@@ -385,6 +417,12 @@ static int __init devices_setup(void)
(1 << 14)), /* RMII */
FPGA_OUT);
/* turn on USB clocks, use external clock */
ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
/* enable USB0 port */
ctrl_outw(0x0600, 0xa40501d4);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
......
......@@ -4,4 +4,6 @@
/* SH only supports software counters through this interface. */
static inline void set_perf_counter_pending(void) {}
#define PERF_COUNTER_INDEX_OFFSET 0
#endif /* __ASM_SH_PERF_COUNTER_H */
......@@ -707,24 +707,25 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status;
unsigned short ssr_status, scr_status, err_enabled;
struct uart_port *port = ptr;
irqreturn_t ret = IRQ_NONE;
ssr_status = sci_in(port, SCxSR);
scr_status = sci_in(port, SCSCR);
err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE);
/* Tx Interrupt */
if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE))
ret = sci_tx_interrupt(irq, ptr);
/* Rx Interrupt */
if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE))
ret = sci_rx_interrupt(irq, ptr);
/* Error Interrupt */
if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
ret = sci_er_interrupt(irq, ptr);
/* Break Interrupt */
if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
return ret;
......
......@@ -337,10 +337,10 @@ config USB_R8A66597_HCD
config SUPERH_ON_CHIP_R8A66597
boolean "Enable SuperH on-chip R8A66597 USB"
depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
help
This driver enables support for the on-chip R8A66597 in the
SH7366 and SH7723 processors.
SH7366, SH7723 and SH7724 processors.
config USB_WHCI_HCD
tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
......
......@@ -44,9 +44,6 @@ static struct fb_fix_screeninfo hitfb_fix __initdata = {
.accel = FB_ACCEL_NONE,
};
static u32 pseudo_palette[16];
static struct fb_info fb_info;
static inline void hitfb_accel_wait(void)
{
while (fb_readw(HD64461_GRCFGR) & HD64461_GRCFGR_ACCSTATUS) ;
......@@ -331,6 +328,8 @@ static struct fb_ops hitfb_ops = {
static int __init hitfb_probe(struct platform_device *dev)
{
unsigned short lcdclor, ldr3, ldvndr;
struct fb_info *info;
int ret;
if (fb_get_options("hitfb", NULL))
return -ENODEV;
......@@ -384,32 +383,53 @@ static int __init hitfb_probe(struct platform_device *dev)
break;
}
fb_info.fbops = &hitfb_ops;
fb_info.var = hitfb_var;
fb_info.fix = hitfb_fix;
fb_info.pseudo_palette = pseudo_palette;
fb_info.flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
info = framebuffer_alloc(sizeof(u32) * 16, &dev->dev);
if (unlikely(!info))
return -ENOMEM;
info->fbops = &hitfb_ops;
info->var = hitfb_var;
info->fix = hitfb_fix;
info->pseudo_palette = info->par;
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN |
FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
fb_info.screen_base = (void *)hitfb_fix.smem_start;
info->screen_base = (void *)hitfb_fix.smem_start;
fb_alloc_cmap(&fb_info.cmap, 256, 0);
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (unlikely(ret < 0))
goto err_fb;
if (register_framebuffer(&fb_info) < 0)
return -EINVAL;
ret = register_framebuffer(info);
if (unlikely(ret < 0))
goto err;
platform_set_drvdata(dev, info);
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fb_info.node, fb_info.fix.id);
info->node, info->fix.id);
return 0;
err:
fb_dealloc_cmap(&info->cmap);
err_fb:
framebuffer_release(info);
return ret;
}
static int __exit hitfb_remove(struct platform_device *dev)
{
return unregister_framebuffer(&fb_info);
struct fb_info *info = platform_get_drvdata(dev);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
return 0;
}
#ifdef CONFIG_PM
static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
static int hitfb_suspend(struct device *dev)
{
u16 v;
......@@ -421,7 +441,7 @@ static int hitfb_suspend(struct platform_device *dev, pm_message_t state)
return 0;
}
static int hitfb_resume(struct platform_device *dev)
static int hitfb_resume(struct device *dev)
{
u16 v;
......@@ -435,17 +455,19 @@ static int hitfb_resume(struct platform_device *dev)
return 0;
}
#endif
static struct dev_pm_ops hitfb_dev_pm_ops = {
.suspend = hitfb_suspend,
.resume = hitfb_resume,
};
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
.remove = __exit_p(hitfb_remove),
#ifdef CONFIG_PM
.suspend = hitfb_suspend,
.resume = hitfb_resume,
#endif
.driver = {
.name = "hitfb",
.owner = THIS_MODULE,
.pm = &hitfb_dev_pm_ops,
},
};
......
......@@ -31,7 +31,7 @@ struct sh_mobile_lcdc_chan {
unsigned long enabled; /* ME and SE in LDCNT2R */
struct sh_mobile_lcdc_chan_cfg cfg;
u32 pseudo_palette[PALETTE_NR];
struct fb_info info;
struct fb_info *info;
dma_addr_t dma_handle;
struct fb_deferred_io defio;
struct scatterlist *sglist;
......@@ -442,22 +442,22 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
/* set bpp format in PKF[4:0] */
tmp = lcdc_read_chan(ch, LDDFR);
tmp &= ~(0x0001001f);
tmp |= (priv->ch[k].info.var.bits_per_pixel == 16) ? 3 : 0;
tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
lcdc_write_chan(ch, LDDFR, tmp);
/* point out our frame buffer */
lcdc_write_chan(ch, LDSA1R, ch->info.fix.smem_start);
lcdc_write_chan(ch, LDSA1R, ch->info->fix.smem_start);
/* set line size */
lcdc_write_chan(ch, LDMLSR, ch->info.fix.line_length);
lcdc_write_chan(ch, LDMLSR, ch->info->fix.line_length);
/* setup deferred io if SYS bus */
tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
if (ch->ldmt1r_value & (1 << 12) && tmp) {
ch->defio.deferred_io = sh_mobile_lcdc_deferred_io;
ch->defio.delay = msecs_to_jiffies(tmp);
ch->info.fbdefio = &ch->defio;
fb_deferred_io_init(&ch->info);
ch->info->fbdefio = &ch->defio;
fb_deferred_io_init(ch->info);
/* one-shot mode */
lcdc_write_chan(ch, LDSM1R, 1);
......@@ -503,12 +503,12 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
* flush frame, and wait for frame end interrupt
* clean up deferred io and enable clock
*/
if (ch->info.fbdefio) {
if (ch->info->fbdefio) {
ch->frame_end = 0;
schedule_delayed_work(&ch->info.deferred_work, 0);
schedule_delayed_work(&ch->info->deferred_work, 0);
wait_event(ch->frame_end_wait, ch->frame_end);
fb_deferred_io_cleanup(&ch->info);
ch->info.fbdefio = NULL;
fb_deferred_io_cleanup(ch->info);
ch->info->fbdefio = NULL;
sh_mobile_lcdc_clk_on(priv);
}
......@@ -817,9 +817,16 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
priv->base = ioremap_nocache(res->start, (res->end - res->start) + 1);
for (i = 0; i < j; i++) {
info = &priv->ch[i].info;
cfg = &priv->ch[i].cfg;
priv->ch[i].info = framebuffer_alloc(0, &pdev->dev);
if (!priv->ch[i].info) {
dev_err(&pdev->dev, "unable to allocate fb_info\n");
error = -ENOMEM;
break;
}
info = priv->ch[i].info;
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
......@@ -872,7 +879,7 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
for (i = 0; i < j; i++) {
struct sh_mobile_lcdc_chan *ch = priv->ch + i;
info = &ch->info;
info = ch->info;
if (info->fbdefio) {
priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
......@@ -915,15 +922,15 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
int i;
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
if (priv->ch[i].info.dev)
unregister_framebuffer(&priv->ch[i].info);
if (priv->ch[i].info->dev)
unregister_framebuffer(priv->ch[i].info);
sh_mobile_lcdc_stop(priv);
for (i = 0; i < ARRAY_SIZE(priv->ch); i++) {
info = &priv->ch[i].info;
info = priv->ch[i].info;
if (!info->device)
if (!info || !info->device)
continue;
if (priv->ch[i].sglist)
......@@ -932,6 +939,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
dma_free_coherent(&pdev->dev, info->fix.smem_len,
info->screen_base, priv->ch[i].dma_handle);
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
#ifdef CONFIG_HAVE_CLK
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册