提交 61ffcafa 编写于 作者: K Karsten Keil 提交者: Linus Torvalds

[PATCH] Fix ST 5481 USB driver

The old driver was not fully adapted to new USB ABI and does not
work.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 27b2f679
......@@ -466,10 +466,10 @@ void st5481_stop(struct st5481_adapter *adapter);
#define __debug_variable st5481_debug
#include "hisax_debug.h"
#ifdef CONFIG_HISAX_DEBUG
extern int st5481_debug;
#ifdef CONFIG_HISAX_DEBUG
#define DBG_ISO_PACKET(level,urb) \
if (level & __debug_variable) dump_iso_packet(__FUNCTION__,urb)
......
......@@ -172,14 +172,18 @@ static void usb_b_out_complete(struct urb *urb, struct pt_regs *regs)
test_and_clear_bit(buf_nr, &b_out->busy);
if (unlikely(urb->status < 0)) {
if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(4,"urb killed status %d", urb->status);
return; // Give up
default:
WARN("urb status %d",urb->status);
if (b_out->busy == 0) {
st5481_usb_pipe_reset(adapter, (bcs->channel+1)*2 | USB_DIR_OUT, NULL, NULL);
}
} else {
DBG(1,"urb killed");
return; // Give up
break;
}
}
......@@ -205,7 +209,9 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
bcs->mode = mode;
// Cancel all USB transfers on this B channel
b_out->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(b_out->urb[0]);
b_out->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(b_out->urb[1]);
b_out->busy = 0;
......
......@@ -382,16 +382,20 @@ static void usb_d_out_complete(struct urb *urb, struct pt_regs *regs)
test_and_clear_bit(buf_nr, &d_out->busy);
if (unlikely(urb->status < 0)) {
if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(1,"urb killed status %d", urb->status);
break;
default:
WARN("urb status %d",urb->status);
if (d_out->busy == 0) {
st5481_usb_pipe_reset(adapter, EP_D_OUT | USB_DIR_OUT, fifo_reseted, adapter);
}
return;
} else {
DBG(1,"urb killed");
return; // Give up
break;
}
return; // Give up
}
FsmEvent(&adapter->d_out.fsm, EV_DOUT_COMPLETE, (void *) buf_nr);
......@@ -709,14 +713,14 @@ int st5481_setup_d(struct st5481_adapter *adapter)
adapter->l1m.fsm = &l1fsm;
adapter->l1m.state = ST_L1_F3;
adapter->l1m.debug = 1;
adapter->l1m.debug = st5481_debug & 0x100;
adapter->l1m.userdata = adapter;
adapter->l1m.printdebug = l1m_debug;
FsmInitTimer(&adapter->l1m, &adapter->timer);
adapter->d_out.fsm.fsm = &dout_fsm;
adapter->d_out.fsm.state = ST_DOUT_NONE;
adapter->d_out.fsm.debug = 1;
adapter->d_out.fsm.debug = st5481_debug & 0x100;
adapter->d_out.fsm.userdata = adapter;
adapter->d_out.fsm.printdebug = dout_debug;
......
......@@ -43,10 +43,10 @@ static int number_of_leds = 2; /* 2 LEDs on the adpater default */
module_param(number_of_leds, int, 0);
#ifdef CONFIG_HISAX_DEBUG
static int debug = 0x1;
static int debug = 0;
module_param(debug, int, 0);
int st5481_debug;
#endif
int st5481_debug;
static LIST_HEAD(adapter_list);
......
......@@ -132,11 +132,15 @@ static void usb_ctrl_complete(struct urb *urb, struct pt_regs *regs)
struct ctrl_msg *ctrl_msg;
if (unlikely(urb->status < 0)) {
if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
WARN("urb status %d",urb->status);
} else {
DBG(1,"urb killed");
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
WARN("urb status %d",urb->status);
break;
}
}
......@@ -191,7 +195,7 @@ static void usb_int_complete(struct urb *urb, struct pt_regs *regs)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
DBG(1, "urb shutting down with status: %d", urb->status);
DBG(2, "urb shutting down with status: %d", urb->status);
return;
default:
WARN("nonzero urb status received: %d", urb->status);
......@@ -199,7 +203,7 @@ static void usb_int_complete(struct urb *urb, struct pt_regs *regs)
}
DBG_PACKET(1, data, INT_PKT_SIZE);
DBG_PACKET(2, data, INT_PKT_SIZE);
if (urb->actual_length == 0) {
goto exit;
......@@ -250,7 +254,7 @@ int st5481_setup_usb(struct st5481_adapter *adapter)
struct urb *urb;
u8 *buf;
DBG(1,"");
DBG(2,"");
if ((status = usb_reset_configuration (dev)) < 0) {
WARN("reset_configuration failed,status=%d",status);
......@@ -330,15 +334,17 @@ void st5481_release_usb(struct st5481_adapter *adapter)
DBG(1,"");
// Stop and free Control and Interrupt URBs
usb_unlink_urb(ctrl->urb);
usb_kill_urb(ctrl->urb);
if (ctrl->urb->transfer_buffer)
kfree(ctrl->urb->transfer_buffer);
usb_free_urb(ctrl->urb);
ctrl->urb = NULL;
usb_unlink_urb(intr->urb);
usb_kill_urb(intr->urb);
if (intr->urb->transfer_buffer)
kfree(intr->urb->transfer_buffer);
usb_free_urb(intr->urb);
ctrl->urb = NULL;
}
/*
......@@ -406,6 +412,7 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev,
spin_lock_init(&urb->lock);
urb->dev=dev;
urb->pipe=pipe;
urb->interval = 1;
urb->transfer_buffer=buf;
urb->number_of_packets = num_packets;
urb->transfer_buffer_length=num_packets*packet_size;
......@@ -452,7 +459,9 @@ st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev,
if (urb[j]) {
if (urb[j]->transfer_buffer)
kfree(urb[j]->transfer_buffer);
urb[j]->transfer_buffer = NULL;
usb_free_urb(urb[j]);
urb[j] = NULL;
}
}
return retval;
......@@ -463,10 +472,11 @@ void st5481_release_isocpipes(struct urb* urb[2])
int j;
for (j = 0; j < 2; j++) {
usb_unlink_urb(urb[j]);
usb_kill_urb(urb[j]);
if (urb[j]->transfer_buffer)
kfree(urb[j]->transfer_buffer);
usb_free_urb(urb[j]);
urb[j] = NULL;
}
}
......@@ -485,11 +495,15 @@ static void usb_in_complete(struct urb *urb, struct pt_regs *regs)
int len, count, status;
if (unlikely(urb->status < 0)) {
if (urb->status != -ENOENT && urb->status != -ESHUTDOWN) {
WARN("urb status %d",urb->status);
} else {
DBG(1,"urb killed");
switch (urb->status) {
case -ENOENT:
case -ESHUTDOWN:
case -ECONNRESET:
DBG(1,"urb killed status %d", urb->status);
return; // Give up
default:
WARN("urb status %d",urb->status);
break;
}
}
......@@ -631,7 +645,9 @@ void st5481_in_mode(struct st5481_in *in, int mode)
in->mode = mode;
in->urb[0]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(in->urb[0]);
in->urb[1]->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(in->urb[1]);
if (in->mode != L1_MODE_NULL) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册