qla2xxx: Move two arrays from header files to .c files

This patch avoids that building with W=1 triggers compiler
warnings similar to the following:

drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning: ‘qla8044_reg_tbl’ defined but not used [-Wunused-const-variable=]
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Christoph Hellwig <hch@lst.de>

drivers/scsi/qla2xxx/qla_nx.c

@@ -42,6 +42,11 @@ static int qla82xx_crb_table_initialized;
 	(crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \
 	QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20)
 
+const int MD_MIU_TEST_AGT_RDDATA[] = {
+	0x410000A8, 0x410000AC,
+	0x410000B8, 0x410000BC
+};
+
 static void qla82xx_crb_addr_transform_setup(void)
 {
 	qla82xx_crb_addr_transform(XDMA);

drivers/scsi/qla2xxx/qla_nx.h

@@ -1176,8 +1176,7 @@ struct qla82xx_md_entry_queue {
 #define MD_MIU_TEST_AGT_ADDR_LO		0x41000094
 #define MD_MIU_TEST_AGT_ADDR_HI		0x41000098
 
-static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
-	0x410000B8, 0x410000BC };
+extern const int MD_MIU_TEST_AGT_RDDATA[4];
 
 #define CRB_NIU_XG_PAUSE_CTL_P0        0x1
 #define CRB_NIU_XG_PAUSE_CTL_P1        0x8

drivers/scsi/qla2xxx/qla_nx2.c

@@ -15,6 +15,23 @@
 
 #define TIMEOUT_100_MS 100
 
+static const uint32_t qla8044_reg_tbl[] = {
+	QLA8044_PEG_HALT_STATUS1,
+	QLA8044_PEG_HALT_STATUS2,
+	QLA8044_PEG_ALIVE_COUNTER,
+	QLA8044_CRB_DRV_ACTIVE,
+	QLA8044_CRB_DEV_STATE,
+	QLA8044_CRB_DRV_STATE,
+	QLA8044_CRB_DRV_SCRATCH,
+	QLA8044_CRB_DEV_PART_INFO1,
+	QLA8044_CRB_IDC_VER_MAJOR,
+	QLA8044_FW_VER_MAJOR,
+	QLA8044_FW_VER_MINOR,
+	QLA8044_FW_VER_SUB,
+	QLA8044_CMDPEG_STATE,
+	QLA8044_ASIC_TEMP,
+};
+
 /* 8044 Flash Read/Write functions */
 uint32_t
 qla8044_rd_reg(struct qla_hw_data *ha, ulong addr)

drivers/scsi/qla2xxx/qla_nx2.h

@@ -535,23 +535,6 @@ enum qla_regs {
 #define CRB_CMDPEG_CHECK_RETRY_COUNT    60
 #define CRB_CMDPEG_CHECK_DELAY          500
 
-static const uint32_t qla8044_reg_tbl[] = {
-	QLA8044_PEG_HALT_STATUS1,
-	QLA8044_PEG_HALT_STATUS2,
-	QLA8044_PEG_ALIVE_COUNTER,
-	QLA8044_CRB_DRV_ACTIVE,
-	QLA8044_CRB_DEV_STATE,
-	QLA8044_CRB_DRV_STATE,
-	QLA8044_CRB_DRV_SCRATCH,
-	QLA8044_CRB_DEV_PART_INFO1,
-	QLA8044_CRB_IDC_VER_MAJOR,
-	QLA8044_FW_VER_MAJOR,
-	QLA8044_FW_VER_MINOR,
-	QLA8044_FW_VER_SUB,
-	QLA8044_CMDPEG_STATE,
-	QLA8044_ASIC_TEMP,
-};
-
 /* MiniDump Structures */
 
 /* Driver_code is for driver to write some info about the entry