From 5eca4823ea8f99a7109779f68cedb00535aa6834 Mon Sep 17 00:00:00 2001 From: Akihiro Tsukada Date: Tue, 25 Aug 2009 02:39:51 -0300 Subject: [PATCH] V4L/DVB (13000): add driver for 774 Friio White USB ISDB-T receiver This patch adds driver for 774 Friio White, ISDB-T USB receiver Friio White is an USB 2.0 ISDB-T receiver. (http://www.friio.com/) The device has a GL861 chip and a Comtech JDVBT90502 canned tuner module. This driver ignores all the frontend_parameters except frequency, as ISDB-T shares the same parameter configuration across the country and thus the device can work like an intelligent one. As this device does not include a CAM nor hardware descrambling feature, the driver passes through scrambled TS streams. There is Friio Black, a variant for ISDB-S, which shares the same USB Vendor/Product ID with White, but it is not supported in this driver. They should be identified in the initialization sequence, but this feature is not tested. Signed-off-by: Akihiro Tsukada Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 6 + drivers/media/dvb/dvb-usb/Makefile | 3 + drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 + drivers/media/dvb/dvb-usb/friio-fe.c | 483 ++++++++++++++++++++++ drivers/media/dvb/dvb-usb/friio.c | 525 ++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/friio.h | 99 +++++ 6 files changed, 1118 insertions(+) create mode 100644 drivers/media/dvb/dvb-usb/friio-fe.c create mode 100644 drivers/media/dvb/dvb-usb/friio.c create mode 100644 drivers/media/dvb/dvb-usb/friio.h diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index c5ec9a5f3b3f..0e4b97fba384 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -316,3 +316,9 @@ config DVB_USB_CE6230 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver + +config DVB_USB_FRIIO + tristate "Friio ISDB-T USB2.0 Receiver support" + depends on DVB_USB + help + Say Y here to support the Japanese DTV receiver Friio. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index f92734ed777a..85b83a43d55d 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o dvb-usb-ce6230-objs = ce6230.o obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o +dvb-usb-friio-objs = friio.o friio-fe.o +obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2d51e3c28207..a548c14c1944 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -60,6 +60,7 @@ #define USB_VID_YUAN 0x1164 #define USB_VID_XTENSIONS 0x1ae7 #define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -274,5 +275,6 @@ #define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 #endif diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c new file mode 100644 index 000000000000..c4dfe25cf60d --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -0,0 +1,483 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include +#include +#include + +#include "friio.h" + +struct jdvbt90502_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + struct jdvbt90502_config config; +}; + +/* NOTE: TC90502 has 16bit register-address? */ +/* register 0x0100 is used for reading PLL status, so reg is u16 here */ +static int jdvbt90502_reg_read(struct jdvbt90502_state *state, + const u16 reg, u8 *buf, const size_t count) +{ + int ret; + u8 wbuf[3]; + struct i2c_msg msg[2]; + + wbuf[0] = reg & 0xFF; + wbuf[1] = 0; + wbuf[2] = reg >> 8; + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = wbuf; + msg[0].len = sizeof(wbuf); + + msg[1].addr = msg[0].addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + deb_fe(" reg read failed.\n"); + return -EREMOTEIO; + } + return 0; +} + +/* currently 16bit register-address is not used, so reg is u8 here */ +static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state, + const u8 reg, const u8 val) +{ + struct i2c_msg msg; + u8 wbuf[2]; + + wbuf[0] = reg; + wbuf[1] = val; + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.buf = wbuf; + msg.len = sizeof(wbuf); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + deb_fe(" reg write failed."); + return -EREMOTEIO; + } + return 0; +} + +static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + int err, i; + for (i = 0; i < len - 1; i++) { + err = jdvbt90502_single_reg_write(state, + buf[0] + i, buf[i + 1]); + if (err) + return err; + } + + return 0; +} + +/* read pll status byte via the demodulator's I2C register */ +/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */ +static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result) +{ + int ret; + + /* +1 for reading */ + u8 pll_addr_byte = (state->config.pll_address << 1) + 1; + + *result = 0; + + ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG, + pll_addr_byte); + if (ret) + goto error; + + ret = jdvbt90502_reg_read(state, 0x0100, result, 1); + if (ret) + goto error; + + deb_fe("PLL read val:%02x\n", *result); + return 0; + +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + + +/* set pll frequency via the demodulator's I2C register */ +static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq) +{ + int ret; + int retry; + u8 res1; + u8 res2[9]; + + u8 pll_freq_cmd[PLL_CMD_LEN]; + u8 pll_agc_cmd[PLL_CMD_LEN]; + struct i2c_msg msg[2]; + u32 f; + + deb_fe("%s: freq=%d, step=%d\n", __func__, freq, + state->frontend.ops.info.frequency_stepsize); + /* freq -> oscilator frequency conversion. */ + /* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */ + /* add 400[1/7 MHZ] = 57.142857MHz. 57MHz for the IF, */ + /* 1/7MHz for center freq shift */ + f = freq / state->frontend.ops.info.frequency_stepsize; + f += 400; + pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */ + pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1; + pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F; + pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF; + pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */ + pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */ + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = pll_freq_cmd; + msg[0].len = sizeof(pll_freq_cmd); + + ret = i2c_transfer(state->i2c, &msg[0], 1); + if (ret != 1) + goto error; + + udelay(50); + + pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG]; + pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE]; + pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1]; + pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2]; + pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */ + pll_agc_cmd[AGC_CTRL_BYTE] = 0x50; + /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */ + + msg[1].addr = msg[0].addr; + msg[1].flags = 0; + msg[1].buf = pll_agc_cmd; + msg[1].len = sizeof(pll_agc_cmd); + + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + goto error; + + /* I don't know what these cmds are for, */ + /* but the USB log on a windows box contains them */ + ret = jdvbt90502_single_reg_write(state, 0x01, 0x40); + ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00); + if (ret) + goto error; + udelay(100); + + /* wait for the demod to be ready? */ +#define RETRY_COUNT 5 + for (retry = 0; retry < RETRY_COUNT; retry++) { + ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1); + if (ret) + goto error; + /* if (res1 != 0x00) goto error; */ + ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2)); + if (ret) + goto error; + if (res2[0] >= 0xA7) + break; + msleep(100); + } + if (retry >= RETRY_COUNT) { + deb_fe("%s: FE does not get ready after freq setting.\n", + __func__); + return -EREMOTEIO; + } + + return 0; +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + +static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state) +{ + u8 result; + int ret; + + *state = FE_HAS_SIGNAL; + + ret = jdvbt90502_pll_read(fe->demodulator_priv, &result); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + *state = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC; + + if (result & PLL_STATUS_LOCKED) + *state |= FE_HAS_LOCK; + + return 0; +} + +static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + int ret; + u8 rbuf[37]; + + *strength = 0; + + /* status register (incl. signal strength) : 0x89 */ + /* TODO: read just the necessary registers [0x8B..0x8D]? */ + ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089, + rbuf, sizeof(rbuf)); + + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */ + *strength = (rbuf[3] << 8) + rbuf[4]; + if (rbuf[2]) + *strength = 0xffff; + + return 0; +} + +static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0x0101; + return 0; +} + +static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fs) +{ + fs->min_delay_ms = 500; + fs->step_size = 0; + fs->max_drift = 0; + + return 0; +} + +static int jdvbt90502_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + p->inversion = INVERSION_AUTO; + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + p->u.ofdm.code_rate_HP = FEC_AUTO; + p->u.ofdm.code_rate_LP = FEC_AUTO; + p->u.ofdm.constellation = QAM_64; + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + return 0; +} + +static int jdvbt90502_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + /** + * NOTE: ignore all the paramters except frequency. + * others should be fixed to the proper value for ISDB-T, + * but don't check here. + */ + + struct jdvbt90502_state *state = fe->demodulator_priv; + int ret; + + deb_fe("%s: Freq:%d\n", __func__, p->frequency); + + ret = jdvbt90502_pll_set_freq(state, p->frequency); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + return 0; +} + +static int jdvbt90502_sleep(struct dvb_frontend *fe) +{ + deb_fe("%s called.\n", __func__); + return 0; +} + + +/** + * (reg, val) commad list to initialize this module. + * captured on a Windows box. + */ +static u8 init_code[][2] = { + {0x01, 0x40}, + {0x04, 0x38}, + {0x05, 0x40}, + {0x07, 0x40}, + {0x0F, 0x4F}, + {0x11, 0x21}, + {0x12, 0x0B}, + {0x13, 0x2F}, + {0x14, 0x31}, + {0x16, 0x02}, + {0x21, 0xC4}, + {0x22, 0x20}, + {0x2C, 0x79}, + {0x2D, 0x34}, + {0x2F, 0x00}, + {0x30, 0x28}, + {0x31, 0x31}, + {0x32, 0xDF}, + {0x38, 0x01}, + {0x39, 0x78}, + {0x3B, 0x33}, + {0x3C, 0x33}, + {0x48, 0x90}, + {0x51, 0x68}, + {0x5E, 0x38}, + {0x71, 0x00}, + {0x72, 0x08}, + {0x77, 0x00}, + {0xC0, 0x21}, + {0xC1, 0x10}, + {0xE4, 0x1A}, + {0xEA, 0x1F}, + {0x77, 0x00}, + {0x71, 0x00}, + {0x71, 0x00}, + {0x76, 0x0C}, +}; + +const static int init_code_len = sizeof(init_code) / sizeof(u8[2]); + +static int jdvbt90502_init(struct dvb_frontend *fe) +{ + int i = -1; + int ret; + struct i2c_msg msg; + + struct jdvbt90502_state *state = fe->demodulator_priv; + + deb_fe("%s called.\n", __func__); + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.len = 2; + for (i = 0; i < init_code_len; i++) { + msg.buf = init_code[i]; + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + goto error; + } + msleep(100); + + return 0; + +error: + deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret); + return -EREMOTEIO; +} + + +static void jdvbt90502_release(struct dvb_frontend *fe) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops jdvbt90502_ops; + +struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d) +{ + struct jdvbt90502_state *state = NULL; + + deb_info("%s called.\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = &d->i2c_adap; + memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config)); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &jdvbt90502_ops, + sizeof(jdvbt90502_ops)); + state->frontend.demodulator_priv = state; + + if (jdvbt90502_init(&state->frontend) < 0) + goto error; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops jdvbt90502_ops = { + + .info = { + .name = "Comtech JDVBT90502 ISDB-T", + .type = FE_OFDM, + .frequency_min = 473000000, /* UHF 13ch, center */ + .frequency_max = 767142857, /* UHF 62ch, center */ + .frequency_stepsize = JDVBT90502_PLL_CLK / + JDVBT90502_PLL_DIVIDER, + .frequency_tolerance = 0, + + /* NOTE: this driver ignores all parameters but frequency. */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = jdvbt90502_release, + + .init = jdvbt90502_init, + .sleep = jdvbt90502_sleep, + .write = _jdvbt90502_write, + + .set_frontend = jdvbt90502_set_frontend, + .get_frontend = jdvbt90502_get_frontend, + .get_tune_settings = jdvbt90502_get_tune_settings, + + .read_status = jdvbt90502_read_status, + .read_ber = jdvbt90502_read_ber, + .read_signal_strength = jdvbt90502_read_signal_strength, + .read_snr = jdvbt90502_read_snr, + .read_ucblocks = jdvbt90502_read_ucblocks, +}; diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c new file mode 100644 index 000000000000..14a65b4aec07 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio.c @@ -0,0 +1,525 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "friio.h" + +/* debug */ +int dvb_usb_friio_debug; +module_param_named(debug, dvb_usb_friio_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/** + * Indirect I2C access to the PLL via FE. + * whole I2C protocol data to the PLL is sent via the FE's I2C register. + * This is done by a control msg to the FE with the I2C data accompanied, and + * a specific USB request number is assigned for that purpose. + * + * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). + * TODO: refoctored, smarter i2c functions. + */ +static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write only */ + u8 req, type; + + deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", + wbuf[1], wbuf[0], wlen - 1); + + if (wo && wlen >= 2) { + req = GL861_REQ_I2C_DATA_CTRL_WRITE; + type = GL861_WRITE; + udelay(20); + return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + req, type, value, index, + &wbuf[1], wlen - 1, 2000); + } + + deb_xfer("not supported ctrl-msg, aborting."); + return -EINVAL; +} + +/* normal I2C access (without extra data arguments). + * write to the register wbuf[0] at I2C address addr with the value wbuf[1], + * or read from the register wbuf[0]. + * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 + */ +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + unsigned int pipe; + + /* special case for the indirect I2C access to the PLL via FE, */ + if (addr == friio_fe_config.demod_address && + wbuf[0] == JDVBT90502_2ND_I2C_REG) + return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + pipe = usb_sndctrlpipe(d->udev, 0); + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + case 3: + /* special case for 16bit register-address */ + index = (wbuf[2] << 8) | wbuf[0]; + value = value + wbuf[1]; + break; + default: + deb_xfer("wlen = %x, aborting.", wlen); + return -EINVAL; + } + msleep(1); + return usb_control_msg(d->udev, pipe, req, type, + value, index, rbuf, rlen, 2000); +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, + msg[i].buf, msg[i].len, + msg[i + 1].buf, msg[i + 1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + + +static int friio_ext_ctl(struct dvb_usb_adapter *adap, + u32 sat_color, int lnb_on) +{ + int i; + int ret; + struct i2c_msg msg; + u8 buf[2]; + u32 mask; + u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; + + msg.addr = 0x00; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + buf[0] = 0x00; + + /* send 2bit header (&B10) */ + buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; + ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + buf[1] = lnb | FRIIO_CTL_STROBE; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + /* send 32bit(satur, R, G, B) data in serial */ + mask = 1 << 31; + for (i = 0; i < 32; i++) { + buf[1] = lnb | FRIIO_CTL_STROBE; + if (sat_color & mask) + buf[1] |= FRIIO_CTL_LED; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + mask >>= 1; + } + + /* set the strobe off */ + buf[1] = lnb; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + return (ret == 70); +} + + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); + +/* TODO: move these init cmds to the FE's init routine? */ +static u8 streaming_init_cmds[][2] = { + {0x33, 0x08}, + {0x37, 0x40}, + {0x3A, 0x1F}, + {0x3B, 0xFF}, + {0x3C, 0x1F}, + {0x3D, 0xFF}, + {0x38, 0x00}, + {0x35, 0x00}, + {0x39, 0x00}, + {0x36, 0x00}, +}; +static int cmdlen = sizeof(streaming_init_cmds) / 2; + +/* + * Command sequence in this init function is a replay + * of the captured USB commands from the Windows proprietary driver. + */ +static int friio_initialize(struct dvb_usb_device *d) +{ + int ret; + int i; + int retry = 0; + u8 rbuf[2]; + u8 wbuf[3]; + + deb_info("%s called.\n", __func__); + + /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ + /* because the i2c device is not set up yet. */ + wbuf[0] = 0x11; + wbuf[1] = 0x02; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(2); + + wbuf[0] = 0x11; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(1); + + /* following msgs should be in the FE's init code? */ + /* cmd sequence to identify the device type? (friio black/white) */ + wbuf[0] = 0x03; + wbuf[1] = 0x80; + /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x1200, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(2); + wbuf[0] = 0x03; + wbuf[1] = 0x80; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x9000, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff again. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(1); + +restart: + /* ============ start DEMOD init cmds ================== */ + /* read PLL status to clear the POR bit */ + wbuf[0] = JDVBT90502_2ND_I2C_REG; + wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(5); + /* note: DEMODULATOR has 16bit register-address. */ + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg addr: 0x0100 */ + wbuf[1] = 0x00; /* val: not used */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); + if (ret < 0) + goto error; +/* + msleep(1); + wbuf[0] = 0x80; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); + if (ret < 0) + goto error; + */ + if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ + if (++retry > 3) { + deb_info("failed to get the correct" + " FE demod status:0x%02x\n", rbuf[0]); + goto error; + } + msleep(100); + goto restart; + } + + /* TODO: check return value in rbuf */ + /* =========== end DEMOD init cmds ===================== */ + msleep(1); + + wbuf[0] = 0x30; + wbuf[1] = 0x04; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(2); + /* following 2 cmds unnecessary? */ + wbuf[0] = 0x00; + wbuf[1] = 0x01; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + wbuf[0] = 0x06; + wbuf[1] = 0x0F; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + /* some streaming ctl cmds (maybe) */ + msleep(10); + for (i = 0; i < cmdlen; i++) { + ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, + NULL, 0); + if (ret < 0) + goto error; + msleep(1); + } + msleep(20); + + /* change the LED color etc. */ + ret = friio_streaming_ctrl(&d->adapter[0], 0); + if (ret < 0) + goto error; + + return 0; + +error: + deb_info("%s:ret == %d\n", __func__, ret); + return -EIO; +} + +/* Callbacks for DVB USB */ + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + + deb_info("%s called.(%d)\n", __func__, onoff); + + /* set the LED color and saturation (and LNB on) */ + if (onoff) + ret = friio_ext_ctl(adap, 0x6400ff64, 1); + else + ret = friio_ext_ctl(adap, 0x96ff00ff, 1); + + if (ret != 1) { + deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); + return -EREMOTEIO; + } + return 0; +} + +static int friio_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (friio_initialize(adap->dev) < 0) + return -EIO; + + adap->fe = jdvbt90502_attach(adap->dev); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties friio_properties; + +static int friio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + if (intf->num_altsetting < GL861_ALTSETTING_COUNT) + return -ENODEV; + + alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); + if (alt == NULL) { + deb_rc("not alt found!\n"); + return -ENODEV; + } + ret = usb_set_interface(interface_to_usbdev(intf), + alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret != 0) { + deb_rc("failed to set alt-setting!\n"); + return ret; + } + + ret = dvb_usb_device_init(intf, &friio_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) + friio_streaming_ctrl(&d->adapter[0], 1); + + return ret; +} + + +struct jdvbt90502_config friio_fe_config = { + .demod_address = FRIIO_DEMOD_ADDR, + .pll_address = FRIIO_PLL_ADDR, +}; + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +}; + +static struct usb_device_id friio_table[] = { + { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, friio_table); + + +static struct dvb_usb_device_properties friio_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = { + /* caps:0 => no pid filter, 188B TS packet */ + /* GL861 has a HW pid filter, but no info available. */ + { + .caps = 0, + + .frontend_attach = friio_frontend_attach, + .streaming_ctrl = friio_streaming_ctrl, + + .stream = { + .type = USB_BULK, + /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ + .count = 8, + .endpoint = 0x01, + .u = { + /* GL861 has 6KB buf inside */ + .bulk = { + .buffersize = 16384, + } + } + }, + } + }, + .i2c_algo = &gl861_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "774 Friio ISDB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &friio_table[0], NULL }, + }, + } +}; + +static struct usb_driver friio_driver = { + .name = "dvb_usb_friio", + .probe = friio_probe, + .disconnect = dvb_usb_device_exit, + .id_table = friio_table, +}; + + +/* module stuff */ +static int __init friio_module_init(void) +{ + int ret; + + ret = usb_register(&friio_driver); + if (ret) + err("usb_register failed. Error number %d", ret); + + return ret; +} + + +static void __exit friio_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&friio_driver); +} + +module_init(friio_module_init); +module_exit(friio_module_exit); + +MODULE_AUTHOR("Akihiro Tsukada "); +MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); +MODULE_VERSION("0.2"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h new file mode 100644 index 000000000000..af8d55e390fb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio.h @@ -0,0 +1,99 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_FRIIO_H_ +#define _DVB_USB_FRIIO_H_ + +/** + * Friio Components + * USB hub: AU4254 + * USB controller(+ TS dmx & streaming): GL861 + * Frontend: comtech JDVBT-90502 + * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) + * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) + * LED x3 (+LNB) controll: PIC 16F676 + * EEPROM: 24C08 + * + * (USB smart card reader: AU9522) + * + */ + +#define DVB_USB_LOG_PREFIX "friio" +#include "dvb-usb.h" + +extern int dvb_usb_friio_debug; +#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) + +/* Vendor requests */ +#define GL861_WRITE 0x40 +#define GL861_READ 0xc0 + +/* command bytes */ +#define GL861_REQ_I2C_WRITE 0x01 +#define GL861_REQ_I2C_READ 0x02 +/* For control msg with data argument */ +/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ +#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 + +#define GL861_ALTSETTING_COUNT 2 +#define FRIIO_BULK_ALTSETTING 0 +#define FRIIO_ISOC_ALTSETTING 1 + +/* LED & LNB control via PIC. */ +/* basically, it's serial control with clock and strobe. */ +/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ +/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ +#define FRIIO_CTL_LNB (1 << 0) +#define FRIIO_CTL_STROBE (1 << 1) +#define FRIIO_CTL_CLK (1 << 2) +#define FRIIO_CTL_LED (1 << 3) + +/* Front End related */ + +#define FRIIO_DEMOD_ADDR (0x30 >> 1) +#define FRIIO_PLL_ADDR (0xC0 >> 1) + +#define JDVBT90502_PLL_CLK 4000000 +#define JDVBT90502_PLL_DIVIDER 28 + +#define JDVBT90502_2ND_I2C_REG 0xFE + +/* byte index for pll i2c command data structure*/ +/* see datasheet for tua6034 */ +#define DEMOD_REDIRECT_REG 0 +#define ADDRESS_BYTE 1 +#define DIVIDER_BYTE1 2 +#define DIVIDER_BYTE2 3 +#define CONTROL_BYTE 4 +#define BANDSWITCH_BYTE 5 +#define AGC_CTRL_BYTE 5 +#define PLL_CMD_LEN 6 + +/* bit masks for PLL STATUS response */ +#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ +#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ +#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ +#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ + /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ + + +struct jdvbt90502_config { + u8 demod_address; /* i2c addr for demodulator IC */ + u8 pll_address; /* PLL addr on the secondary i2c*/ +}; +extern struct jdvbt90502_config friio_fe_config; + +extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); +#endif -- GitLab