extcon: arizona: Clear _trig_sts bits after jack detection

It is important to clear the wake trigger status bits otherwise DCVDD
will be held high independent of the state of the LDOENA line.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

drivers/extcon/extcon-arizona.c

@@ -939,6 +939,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 				   ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB);
 	}
 
+	/* Clear trig_sts to make sure DCVDD is not forced up */
+	regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG,
+		     ARIZONA_MICD_CLAMP_FALL_TRIG_STS |
+		     ARIZONA_MICD_CLAMP_RISE_TRIG_STS |
+		     ARIZONA_JD1_FALL_TRIG_STS |
+		     ARIZONA_JD1_RISE_TRIG_STS);
+
 	mutex_unlock(&info->lock);
 
 	pm_runtime_mark_last_busy(info->dev);

include/linux/mfd/arizona/registers.h

@@ -5267,6 +5267,14 @@
 /*
  * R3408 (0xD50) - AOD wkup and trig
  */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS         0x0080  /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_MASK    0x0080  /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_SHIFT        7  /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_WIDTH        1  /* MICD_CLAMP_FALL_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS         0x0040  /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_MASK    0x0040  /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_SHIFT        6  /* MICD_CLAMP_RISE_TRIG_STS */
+#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_WIDTH        1  /* MICD_CLAMP_RISE_TRIG_STS */
 #define ARIZONA_GP5_FALL_TRIG_STS                0x0020  /* GP5_FALL_TRIG_STS */
 #define ARIZONA_GP5_FALL_TRIG_STS_MASK           0x0020  /* GP5_FALL_TRIG_STS */
 #define ARIZONA_GP5_FALL_TRIG_STS_SHIFT               5  /* GP5_FALL_TRIG_STS */