From 5c61259e6c7290082108e93815f7f72f27da14f4 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 22 Jun 2009 13:17:10 +0800 Subject: [PATCH] drm/mode: get the modeline for standard timing in EDID by using CVT/GTF Create the standard timing modeline by using CVT/GFT algorithm while interpreting the EDID. In course of interpreting the EDID, the timing level will be obtained, which is used to determine whether the CVT/GTF algorithm is selected to generate the modeline for the given hdisplay/vdisplay/vrefresh_rate. In the UMS mode firstly it will check whether it can be found in the DMT table. If it can be found, then the modeline is returned. Then the timing_level is used to choose CVT/GTF. As there is no DMT table, no modeline is returned when timing level is DMT. For the other two timing levels, the CVT/GTF will be called to generate the required standard timing modeline. [airlied: fixed up conflicts since EDID rework] Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 70 +++++++++++++++++++++++++++++++------- 1 file changed, 58 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 80cc6d06d61b..bbcb2e22675b 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -61,6 +61,10 @@ /* use +hsync +vsync for detailed mode */ #define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6) +#define LEVEL_DMT 0 +#define LEVEL_GTF 1 +#define LEVEL_CVT 2 + static struct edid_quirk { char *vendor; int product_id; @@ -240,25 +244,31 @@ static void edid_fixup_preferred(struct drm_connector *connector, /** * drm_mode_std - convert standard mode info (width, height, refresh) into mode * @t: standard timing params + * @timing_level: standard timing level * * Take the standard timing params (in this case width, aspect, and refresh) - * and convert them into a real mode using CVT. + * and convert them into a real mode using CVT/GTF/DMT. * * Punts for now, but should eventually use the FB layer's CVT based mode * generation code. */ struct drm_display_mode *drm_mode_std(struct drm_device *dev, - struct std_timing *t) + struct std_timing *t, + int timing_level) { struct drm_display_mode *mode; - int hsize = t->hsize * 8 + 248, vsize; + int hsize, vsize; + int vrefresh_rate; unsigned aspect_ratio = (t->vfreq_aspect & EDID_TIMING_ASPECT_MASK) >> EDID_TIMING_ASPECT_SHIFT; - - mode = drm_mode_create(dev); - if (!mode) - return NULL; - + unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK) + >> EDID_TIMING_VFREQ_SHIFT; + + /* According to the EDID spec, the hdisplay = hsize * 8 + 248 */ + hsize = t->hsize * 8 + 248; + /* vrefresh_rate = vfreq + 60 */ + vrefresh_rate = vfreq + 60; + /* the vdisplay is calculated based on the aspect ratio */ if (aspect_ratio == 0) vsize = (hsize * 10) / 16; else if (aspect_ratio == 1) @@ -268,8 +278,23 @@ struct drm_display_mode *drm_mode_std(struct drm_device *dev, else vsize = (hsize * 9) / 16; - drm_mode_set_name(mode); - + mode = NULL; + switch (timing_level) { + case LEVEL_DMT: + mode = drm_mode_create(dev); + if (mode) { + mode->hdisplay = hsize; + mode->vdisplay = vsize; + drm_mode_set_name(mode); + } + break; + case LEVEL_GTF: + mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); + break; + case LEVEL_CVT: + mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0); + break; + } return mode; } @@ -451,6 +476,19 @@ static int add_established_modes(struct drm_connector *connector, struct edid *e return modes; } +/** + * stanard_timing_level - get std. timing level(CVT/GTF/DMT) + * @edid: EDID block to scan + */ +static int standard_timing_level(struct edid *edid) +{ + if (edid->revision >= 2) { + if (edid->revision >= 4 && (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)) + return LEVEL_CVT; + return LEVEL_GTF; + } + return LEVEL_DMT; +} /** * add_standard_modes - get std. modes from EDID and add them @@ -463,6 +501,9 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid { struct drm_device *dev = connector->dev; int i, modes = 0; + int timing_level; + + timing_level = standard_timing_level(edid); for (i = 0; i < EDID_STD_TIMINGS; i++) { struct std_timing *t = &edid->standard_timings[i]; @@ -472,7 +513,8 @@ static int add_standard_modes(struct drm_connector *connector, struct edid *edid if (t->hsize == 1 && t->vfreq_aspect == 1) continue; - newmode = drm_mode_std(dev, &edid->standard_timings[i]); + newmode = drm_mode_std(dev, &edid->standard_timings[i], + timing_level); if (newmode) { drm_mode_probed_add(connector, newmode); modes++; @@ -496,6 +538,9 @@ static int add_detailed_info(struct drm_connector *connector, { struct drm_device *dev = connector->dev; int i, j, modes = 0; + int timing_level; + + timing_level = standard_timing_level(edid); for (i = 0; i < EDID_DETAILED_TIMINGS; i++) { struct detailed_timing *timing = &edid->detailed_timings[i]; @@ -541,7 +586,8 @@ static int add_detailed_info(struct drm_connector *connector, struct drm_display_mode *newmode; std = &data->data.timings[j]; - newmode = drm_mode_std(dev, std); + newmode = drm_mode_std(dev, std, + timing_level); if (newmode) { drm_mode_probed_add(connector, newmode); modes++; -- GitLab